Customer fields do not display in cProj 4.5

Hello,
I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
I am using following steps to do this:
1. Enhance database tables for customer fields
2. Create field groups for customer fields
3. Assign customer fields for fields groups
4. Define fields groups per project type
5. Save and open cProjects
But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
Does someone has an idea what is going wrong with it and where I can start searching the problem?
Thx, Vanessa

Hello Vanessa,
there is one more step that needs to be done in the customizing:
You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
If you have no field control, these fields will be always hidden.
Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
Regards,
Silvia

Similar Messages

  • Customer fields do not display in Define Field Groups for Cust. Fields IMG

    I am customizing to display cusotmer fields in cporjects IMG actviity 'Define Field Groups for Customer Fields'.
    I am able to see the main tab in object category and multiple sub tabs in it. However customer fields that have been added by Enhance database tables in DPO are not shown or visible in the sub tabs.
    Am I missing any config? Please let me know.
    Senthil

    Hi Senthil,
    If you can see the tabs and not the fields, pl check if you have covered field control for these newly created custom fields.
    To have field control for these fields, you will have to copy the standard SAP provided field control, include the structure that has you custom fields and give it authorizations etc as per your requirement.
    Pl read carefully the documentation provided with field control.
    Refer note 947963 - Setting up field control
    Regards,
    Reema.

  • Custom fields values not saved in AUFK using bapi_alm_order_maintain

    Hi ,
        We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
    We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
    EXTENSION_IN
                STRUCTURE           =  CI_AUFK
                VALUEPART1        =  '20091223' .
    Please provide the solution.

    Hi Phani,
    May be these links are helpful:
    BAPI extention to work order aiming AUFK custom field filling
    Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
    Also search sdn using the BAPI function module, you may get some idea.
    Regards,
    Swarna Munukoti

  • New ALV field is not displaying

    Hi
    I have added the currency field in the existing ALV report.
    The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help
    Below is my ALV code for currency.
    PERFORM FILL_FIELDCAT USING
    'WAERS' SPACE SPACE 'CURRENCY' 'CURRENCY' 'CURRENCY'.
    READ TABLE GIT_FIELDCAT INTO LX_FIELDCAT
              WITH KEY FIELDNAME = 'WAERS' .
      LX_FIELDCAT-OUTPUTLEN = 5.
      LX_FIELDCAT-JUST       = 'L'.
      MODIFY GIT_FIELDCAT FROM LX_FIELDCAT INDEX SY-TABIX.
    FORM FILL_FIELDCAT USING    P_FIELDNAME
                                P_NO_OUT
                                P_DO_SUM
                                P_SELTEXT_S
                                P_SELTEXT_M
                                P_SELTEXT_L.                    "#EC *
      DATA: LX_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
      CLEAR LX_FIELDCAT.
      LX_FIELDCAT-TABNAME    = 'GIT_LIST'.
      LX_FIELDCAT-FIELDNAME  = P_FIELDNAME.
      LX_FIELDCAT-NO_OUT     = P_NO_OUT.
      LX_FIELDCAT-DO_SUM     = P_DO_SUM.
      LX_FIELDCAT-SELTEXT_S  = P_SELTEXT_S.
      LX_FIELDCAT-SELTEXT_M  = P_SELTEXT_M.
      LX_FIELDCAT-SELTEXT_L  = P_SELTEXT_L.
      APPEND LX_FIELDCAT TO GIT_FIELDCAT.
    ENDFORM.                               " FILL_FIELDCAT

    You have to [maintain maintenance dialog|http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/a7/513484407a11d1893b0000e8323c4f/frameset.htm] as described in the link.
    Regards,
    Raymond

  • Custom field in 'Notes and Attachment" tab of shopping cart

    Hi All,
    I am working in SRM 7.0 classic scenario and i have requirement in which i need to add custom field in 'Notes and Attachment" tab of the shopping cart portal.
    I have added those fields in structure --- INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
    Also implemented the BBP_DOC_CHANGE_BADI in while i am populating the custom field value.
    I have created custom field as INPUT FIELD in webdynpro component /SAPSRM/WDC_DODC_NA and view : V_DODC_MAIN_VIEW.
    Now I can see the custom field value in table BBP_PDISC, but i am not getting the value in Shopping cart "Notes and Attachments" tab.( I am able to see the field but not the value of it).
    The value is getting populated in ITEM DATA tab instead.
    Please suggest if i am missing anything in the process and how to achieve this.
    Thank you in advance.
    Thanks,
    Satheesh

    Hi,
    You have done everything.. well.. except that you did not set the attribute of the input field to this value.
    When you have value u just need to bind it using set_attribute method of the element.
    Use  ctr+f7 to generate the wizard .. select in set mode.. click on context and select the attribute that you have created in the context.
    Hope this helps.
    Regards,
    Vinay

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • SQL expression field is not displayed on the page header if no records

    Hello
    I'm creating a quite simple report. In this report I've got a SQL expression field which returns a DateTime
    I display this field on the page header section.
    Everything is working fine except when my principal query doesn't return any records my SQL expression field is not displayed. It doesn't seem to be evaluated.
    So, I would display this field even if my Details Section doesn't contains any record.
    I hope you understand what I mean.
    Can someone help me?
    thanks

    Hello,
    I thought about creating a formula but the value I need is stored in a database.
    So i created a simple SQL expression field.
    SELECT CONVERT(DATE,j_1) FROM VW_STD_DATEFIXING
    And this expression doesn't have any dependencies.

  • RE: my input fields does not display when running the page

    my input fields does not display when running the page
    why is that so?

    Hi,
    Can you send the HTML code for us?
    Afonso

  • F-90. asset value date field is not displayed

    Dear all
    In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
    Thanks With  Regards
    RSS.

    Hi,
    You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
    This will resolve your issue.
    Thanks,
    Srinu

  • TS1347 icloud contacts "home field" dose not display on ios7?

    When looking at contacts that are stored using icloud on my ios devices, the home field is not displayed even when edited. 
    This has only happened recently but when I log into icloud using a browser all of the details are there.
    Please can this be fixed?
    Thanks
    Problem using iphone 4s / 5 / ipad mini. ios 7.04.

    Thank you for your response.  I guess I should have indicated the things that I have already tried .  I have already attempted this step couple of times on the iPhone.  I also deleted the iCloud account on the iPhone and added it back on.  None of those things had any effect.  I guess the next thing I could try is backup>full reset.

  • 2 Custom Fields-create and display

    In addition to the standard fields available within the Whou2019s Who service, we need to create and display 2 custom fields within the employee search functionality in ESS. 
    Can someone walk me through the steps please?

    Hello,
    There are 2 sections of search available.
    1 is normal search and 1 is advances search.
    Well for advanced search you can very much follow my earlier reply.
    And you can also have a look at below thread...
    ESS Who is Who - Add search criteria
    I guess you want to add extra field in normal search.
    I am not sure how to do it....as Siddharth (In link I pasted above) says that he himself have never seen any changes in normal search.......
    But still you can give below method a try.....
    http://wiki.sdn.sap.com/wiki/display/profile/ESS%2bPersonal%2bInformation%2bUI%2benhancement%2bwithout%2bmodification?bc=true

  • Creating Custom fields does not have the option to create as a Note field

    Of course I have a sales VP that wants to be able to see what they are typing instead of having it scroll off the screen as they type (even though once they save the record the data is fully displayed).
    Before I go to customer care is there a way for me to request through support that two custom fields I created as Text (Long) can be changed (or new ones created) behind the scenes as a Note field similar to the Comments field? Note is not an user option when creating a custom field.
    I ucan not just rename the description field in the account record as I am already using that field for comments.
    Thanks,
    Caryn

    It is not possible at this time to create a custom Note field. This is something that is on the On Demand roadmap as a enhancement.

  • Custom field to be displayed in shopping cart header

    Hi,
    I have a requirement to add a custom field on the Shopping Cart header.
    We are working on SRM 7.0 version.
    Note 672960 says that the header fields cannot be displayed for the shopping cart. If
    you define fields on the header, they can only be filled in BADIs.
    Is this is true for 7.0 as well?
    Please let me know if anyone has worked on a similar requirement.
    Thanks,
    Binu

    Hi,
    No you can add the customer fields in the header level also.
    Please look at the below structure to add the custom fields.
    INCL_EEW_PD_HEADER_CSF_SC      Customer Enhancements on Shopping Cart Header
    INCL_EEW_PD_HEADER_CST_SC      Tabular Customer Enhancements on Shopping Cart Header
    INCL_EEW_PD_HEADER_SSF_SC      SAP Internal Enhancements (IBUs, and so on) on SC Header
    INCL_EEW_PD_HEADER_SST_SC      SAP Int. Tabular Enhanc. (IBUs, and so on) on SC Header
    You will find this useful.
    https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
    Thanks
    Venkatesh P

  • Creator in custom field entry point display method - Process Manager

    Hi All,
    I'm trying to create a custom field in Process Manager that grabs the creator user id and the current calendar year and displays a table of vacation taken for the year in an entry point. The problem is that I cannot figure out how to grab the creator's uid without using an iProcessInstance object which is not created until the form is submitted.
    Does anyone know how I can do it?
    Thanks in Advance for your help
    -Dug

    Hi Ghanesh and SRM experts,
    I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
    1)  I have gone through all notes mentioned in your scrap and I have implemented them all .
    2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
    3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
    Your post is dated a few months back. If you have solved this problem could you please let me know how.
    Help from anyone who anything about the above will be appreciated.
    Thank You .
    Regards,
    Ajali Sen

  • Custom Component UI not displaying in 11G

    Hi All,
       We have a custom component in 10G where we have added new link in the UCM Home Page, it will be displayed beside Administration tab with name Edit Tables, under this we have sub links Alldistr_RVS, Distprod, Distuser, Prdstate, Products_RVS, State_RVS, Stateusr. When we deployed this code in 11G it is not working. Could any one please provide me code to make it work in 11G instace. Appreciate your help on this.
    Below is the code used in 10G in resource file
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <title>
    ampfRVSEditTables htmlIncludeOrString
    </title>
    </head>
    <body>
    <@dynamichtml custom_finish_layout_init@>
    <$include super.custom_finish_layout_init$>
      <$include how_to_components_menu$>
      <$include vbis_edit_tables_link$>
    <@end@>
      <@dynamichtml how_to_components_menu@>
      <$if not how_to_components_menu_included$>
      //add a drop-down menu, or a tray to the UI
      navBuilder.addChildNodeTo('NAVTREE', 'collection', 'id==EDIT_Tables', 'label==Edit Tables');
      if (navBuilder.menuB)
      navBuilder.menuB.addTopLevelNode("EDIT_Tables");
      else if (navBuilder.trayA)
      navBuilder.trayA.addTopLevelNode("EDIT_Tables");
      <$EDIT_Tables_menu_included=1$>
      <$endif$>
      <@end@>
    <@dynamichtml vbis_edit_tables_link@>
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==ALLDISTR_RVS',
    'label==Alldistr_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_ALLDISTR_RVS_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==DISTPROD',
    'label==Distprod', 'url==<$HttpCgiPath$>?IdcService=GET_DISTPROD_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==DISTUSER',
    'label==Distuser', 'url==<$HttpCgiPath$>?IdcService=GET_DISTUSER_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==PRDSTATE',
    'label==Prdstate', 'url==<$HttpCgiPath$>?IdcService=GET_PRDSTATE_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==PRODUCTS_RVS',
    'label==Products_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_PRODUCTS_RVS_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==STATE_RVS',
    'label==State_RVS', 'url==<$HttpCgiPath$>?IdcService=GET_STATE_RVS_PAGE');
    navBuilder.addChildNodeTo('EDIT_Tables', 'item', 'id==STATEUSR',
    'label==Stateusr', 'url==<$HttpCgiPath$>?IdcService=GET_STATEUSR_PAGE');
    <@end@>
    </body>
      </html>
    Thanks.
    Ashok

    Hi Jiri,
       I from the sample example I tried to develop component to display HOW_TO_COMPONENTS as Menu item under which there is sub item Annuity_Dispname_Mapping, but it is not displaying. I am afraid where it went wrong. Below is the code i used, please help me to fix this. Thank you
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <title>
    MenuExample htmlIncludeOrString
    </title>
    </head>
    <body>
    <@dynamicdata CoreMenuItems@>
    id,           label,       linkType, linkData
    HOW_TO_COMPONENTS, How To Components, YuiDev,
    ANNUITY_DISPNAME_MAPPING, Annuity_Dispname_Mapping, YuiDev, <$HttpCgiPath$>?IdcService=GET_DATA_ACCESS_PAGE
    <@end@>
    <@dynamicdata CoreMenuItemRelationships@>
    <?commatable mergeKey="primaryKey"?>
    parentId,    id,           loadOrder
    MENU_A,      HOW_TO_COMPONENTS,  1000
    HOW_TO_COMPONENTS, ANNUITY_DISPNAME_MAPPING, 10
    <@end@>
    <@dynamicdata CoreMenuItemsFlags@>
    id,           flags
    HOW_TO_COMPONENTS, isLoggedIn
    ANNUITY_DISPNAME_MAPPING, isLoggedIn
    <@end@>
    <@dynamicdata CoreMenuItemsImages@>
    id,           image,                imageOpen
    HOW_TO_COMPONENTS,     ScsPageItem.gif,
    ANNUITY_DISPNAME_MAPPING,     ScsPageItem.gif,
    <@end@>
    <@dynamicdata ampcustom_menu_items_template_data@>
    <?commatable indexedColumns="id"?>
    id,                  parentId,    linkType,        flags
    HOW_TO_COMPONENTS_LINK_TEMPLATE, HOW_TO_COMPONENTS, external,
    <@end@>
    <@dynamichtml custom_navigation_menu_items@>
    <$include super.custom_navigation_menu_items$>
      <$urlCount = 0$>
      <$if utLoadResultSet("pne_portal", "PersonalURLS")$>
      <$if rsFirst("PersonalURLS")$>
      <$loop PersonalURLS$>
      <$ddAppendIndexedColumnResultSet("ampcustom_menu_items_template_data", "NavigationMenuItems", "id", "HOW_TO_COMPONENTS_LINK_TEMPLATE")$>
      <$rsLast("NavigationMenuItems")$>
      <$NavigationMenuItems.id = "HOW_TO_COMPONENTS_" & urlCount$>
      <$NavigationMenuItems.label = js(title)$>
      <$NavigationMenuItems.linkData = js(website)$>
      <$NavigationMenuItems.loadOrder = urlCount$>
      <$urlCount = urlCount + 1$>
      <$endloop$>
      <$endif$>
    <$endif$>
    <@end@>
    </body>
    </html>
    Thanks

Maybe you are looking for