Custom Fields in BSEG not updating on FI document post

Hello Experts
I'm facing a problem when posting FI documents. I'm using BAPI_ACC_DOCUMENT_POST and passing some Z fields using Table Extension2 (bapiparex). The problem is that the Z fields are not getting updated.
BADI_ACC_DOCUMENT is implemented and working. In debug, I can see that the BADI is working as it should. Furthermore, It was already working for older developments in the same machine.
This problem is only happening in Development machine (DEV). In Quality machine (QAS) everything is working fine. Because my program is still in development, I can't transport it to QAS to see if it works there.
The problems are now the following:
- Older developments aren't updating the Z fields in BSEG
- My new development isn't updating Z fields in BSEG
- Manual posting in FB01 updates the fields
What I have done so far:
- Checked my program codding (it's ok)
- Checked BAPI BADI_ACC_DOCUMENT (it's also ok)
- Checked all user exits being used on this machine that could be clearing this fields - In all of the implemented exits, none of them refers to this problem
- Checked all implemented BTE's - In all of the implemented BTE's, none of them refers to this problem
- Searched for differences between SAP releases on DEV and QAS machines - All components have the same release
- Checked for differences (activation, structure, source code, etc) of structure bapicobl_ci, ci_cobl, table bseg, BADI's being used, etc...
What am I missing here? I think I have done everything that could explain this behavior and still have no answers...
Thanks in advance, best regards,
João Argêncio

Hi,
in BAPI_ACC_DOCUMENT_POST there is a part
    PERFORM call_customer_function
            TABLES extension1.
                                                                                PERFORM call_badi
            TABLES extension2.
for the extensions. Seems that there has to be filled a BADI implementation too to get the extension2 data into bseg.
BADI interface is IF_EX_ACC_DOCUMENT, used method should be method CHANGE.
Regards,
Klaus
Edited by: Klaus Babl on Apr 1, 2011 11:54 AM

Similar Messages

Lord 2 Api - Custom field on Item not updating in ECC

Hi All
I have a customer field in erp that I need to get populated from crm.
I have added the field to the additional data b section in vao1.
I have added the field to the TDS_ITEM_COMC and TDS_ITEM_COMV
I have added the screen to the lord mapping table under ITEM, and I have have enabled "Automatic Field Transport".
I have updated the badi BADI_LORD_DO_PAI method Add_supply_LIST with the following code
IF iv_object_id EQ 'ITEM'.
     CLEAR ls_supply.
     ls_supply-field = 'ZZADTV'.
     ls_supply-check = 'N'.
     APPEND ls_supply TO ct_supply.
   ENDIF.
My field is being populated from CRM and is being passed through to r3. I know this because I debugged the function module erp_lord_get_item_multi
and I can see the correct value for my field, and there are no errors reported.
Any one got any ideas.
I have done this for a customer field on at header level and it works.
Thanks
Darren

Hello Darren,
     Please find the screenshots describing the way how it was done by me. Hope this will help you.
The field Application is a Z field added and mapped with ECC.
ZZAFLD00004M is the Field Name
Communication Structures
LORD_MAPPING table
Field in the Screen (Additional Data B ) of VA21/VA22 etc
Field in VBAP
BAdi's which were implemented

Tax field is not updated in COPA documents

Hi
There is a Value field for Tax is not updated in COPA documents due to missing configuration in KE4I. Now the tax field is updatating properly after completed the configuration in KE4I.
But we have couple of COPA documents which are generated (source ) through SD billing. And we have entered proper condition type in Sales order. It is calculating the Tax amount based on condition type in sales order.
Now we want to update the Tax value filed information into COPA documents . Please let me know the procedure to update the Tax value field in COPA documents.
Thanks
Richa

Hi,
reverse/repost the docs again to CO-PA using KE4S.
best regards, Christian

Cannot update delivery attributes: the following field(s) are not updatable

Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?

Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please.

Field BKPF-STBLG not updated

While canceling the commercial as well as excise invoice the field BKPF-STBLG not updated.

Hi,
Thanks for your reply.
I did the changes to the standard sort key 018-Asset Number as per your advise and didnt get the desired outcome.
Our asset code length is 7 and sub asset length is 1
So i went to OB16 and added STBLG to the sort key 018, then system says that you can maintain only upto 18 characters.
So i have made asset number to length to 7 and sub number lengtth to 1 and STBLG length to 10.
After saving the sort key, i have assigned the same sort key to the all of my asset related GL accounts in company code data under control data tab.
Now i reversed one asset transfer transaction and checked the BKPF entry. It didnt updated either in sending company code document nor receiving company code's document.
Please advise me, if i am missing anything.
But really thankful to you for your intiation.
Thanks,
Srinu...

Adding custom fields in BSEG

Hi All,
We have an requirement where I need to add custome field to BSEG(with APPEND).
I wanted to know the steps to add the custom fields in BSEG and also the impact of the same. Are there any concerns as this is a cluster table?
Please let me know.
Thanks for your help in advance.
Best regards,
Yogita
PS : I couldnt find any details in the forum regarding this
Please be careful when creating a subject line. I changed it to what I think you mean.
Edited by: Rob Burbank on Oct 15, 2010 10:27 AM

Guess you didn't look very hard. See Add New fields in BSEG
Rob

BSEG Update during accounting document post

Hello ALL,
Need an idea to update a custom field in BSEG. The field should get updated once the A/C document gets generated but not yet saved in database. The BTEs are not helpful as its NOT allowing to change the T_BSEG entries. Substitution also not helpful as its gets triggered quite prior to the actual generation of accounting document in the system. The important part is the updation shouldn't be transaction specific. Means whenever an accounting document gets generated that exit/badi/bte should trigger to update that custom entry.
Many Thanks for the suggestion.
Somnath

Hello Ankur Agrawal,
Thanks a lot for your help.
I got the item text from the mentioned BADI. I will get back to this post if it works.
Thank again for your quick reply.
Kind Regards,
Bryan

Profit center document created but profit center not updated in FI document

Hi Experts,
I have a strange issue; we created FI document via billing document (SD) where in profit center document got created but profit center is not updated in FI document.
We have separate table to identify the profit center by customer.
Please let know what could be the cause or reason for this kind of scenario
Thanks,
VK

Hi Krishna,
Though ur question seems very old, but now i got the same requirement as like you.
So if you remeber what needs to be done for this issue thats very good help to me.
My Requirement is : I have created Service Entry Sheet by referring PO and while releasing this Service Entry Sheet system is generating MIGO Doc and FI documents in background.
And I have updated PERNR (Persnoal No.) in MSEG-SGTXT by using enhancment but it's not populating in BSEG-SGTXT.
And I found an internal table while debugging i.e ; like ACCIT (not exactly ,similar to this ) where i have updated pernr and sgtxt but same thing will not available in FI Doc display (BSEG-PERNR or BSEG-SGTXG)
So could you plz suggest what needs to be done to achieve this. Im assuming that, is it possible through BTE (Business Transaction Events) ?. if yes, plz tell me how to proceed.
Thanks
Madhan

Quantity not updated in EDI Vendor posting

Hi experts,
We've observed that Quantity (MENGE) is not getting updated on the FI document (Segment 'E1EDP01'). Idoc type 'INVOIC01' and message we using is 'INVOIC01'.
Any idea or has anyone come across this issue?
Thanks for your time.

Hi,
Segment E1EDP01, quantity and unit of measure the quantity and the unit of measure are transferred if the corresponding fields in the billing document are filled. If the corresponding fields in the billing document are filled, but MENGE is still not updated into FI document, Maybe you have used the user exit EXIT_SAPLVEDF_002 on SD side to suppress the values.
Best Regards,
Gladys

Updating custom fields in BSEG table

Hi Experts,
I searched through SDN but did not find satisfactory answer to my problem.
The scenario is that FIDCC2 Idoc is coming to SAP system. This Idoc has extended to include few custom fields. These fields need to be updated in table BSEG. Table BSEG also contains these custom fields. However, the Idoc processing routine is not updating custom fields in table BSEG with the data coming in Idoc. How can I do that?
Thanks in advance,
Netrey

This message is processed by function module IDOC_INPUT_FIDCC2. If you drill down into the code a little bit, you should be able to find BTE/open FI or user exit calls (CALL CUSTOMER-FUNCTION) before the document is being posted.
I found two that are using the ACCIT structure for passing the line items, which should contain your customer fields as well, if they were added to BSEG properly (via transaction OXK3).
Please have a look.
Thomas

Project server 2013----new custom field value is not synced between my work assignment view and project professional

Hi All,
I would like to add a new custom enterprise field in project server to caculate the effective work. I hope it can work as the default field "work" and "overtime work". And I add my custome enterprise field to my work assignment and the
related details view. User can update the values in "my task" but after PM accept the updates, these values are not synced to the project center as well as project professional. Any idea?
Regards,
Anna

Yes, I am saying that the PM cannot see the updated values in the enterprise project in Microsoft Project 2013. It is a task custom field. No errors for it. Would you please help create a task custom field on your side to see whether you can reproduce
this issue? After creating the field, please add it to the "My task" related views so that project members can update the value for the task when they update the task information under "my tasK" page. After that, open the project plan as
project manager to see whether you get the updated value. Thanks a lot!
Regards,
Anna

OXK3 add custom field to bseg bsid bsad

Hi all ,
I have a custom field added to bseg table using transactioin OCK3, but i dont see this field in others tables BSID,BSAD . Can someone tell me the way to add this field in the others tables using tcode OCK3 .
Thanks in advance,
Karim

This field will not be automatically added to secondary indexes (only BSEG, CI_COBL and CI_COBL_BI). You may manually add this field to the secondary indexes via append structure, it will be automatically copied as those tables are filled via move-corresponding like statements. (source [Note 62435 - F-03: Selection by purchasing documents|https://service.sap.com/sap/support/notes/62435])
Regards,
Raymond

Adding Custom Fields to BSEG and BKPF Tables

Hi All,
My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
Regards,
Rohit

Hi Friend,
Please do not add any custom fields in those tables.
These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
Regards
Krishnendu

Custom Field value is not getting populated in Display mode

Hi Experts ,
I have created a custom field on sales tab for BP Role Bill to prty in BP transaction in SAP CRM. The problem i am facing is that , after i chose my sales area field value is not populating in first time no matter whether i am in display or change mode but the moment i switch to the other mode the value is being populated. Kindly help me in solving this.
Regards,
Ameet

Dear Chetan,
If the field is added through AET, can you please check the Get & Set Methods?
If the field value has fixed values which you have defined while creating, then check GET_V & GET_P methods.
Thanks & Kind Regards,
Ravi Kumar A R

User defined field in BSEG not accessible

Hi all.
I have appended a field in BSEG. When I view it in SE16 using BELNR, that field is visible, but when i search it using that field , it shows no data exists. It happens with very less no of BELNR, but it is creating problem.
Can anyone help me?

Hi Arpit,
Please be specefic, Could you not see the data or the data field in the table.
Please refer to data element if you are looking onto the field.
You should be able to view the data for the particular BELNR if not there might be a data problem for that particular BELNR in BSEG table.
Thanks
Ravi Kanth.

Custom Fields in BSEG not updating on FI document post

Similar Messages

Maybe you are looking for