Custom File name for AS2 FA

Hi Gurus,
We have a specific requirement, wherein we are expected to be able to pass a unique file name to all the FA, sent over AS2.
The FAs currently are being handled in B2B.
I also understand that this can be done from the middleware layer ( How to setup filename in AS2 protocol ).
Is it also possible that the same can be done from the B2B itself, probably by using a Callout, so we are able to send it directly from B2B? Please advise.
Thanks in anticipation of a quick response.
Regards,
Sambhav.

Hi Sambhav,
It will be easier and performance oriented if you do it at middleware. It's my personal opinion that callouts should be used as a last option.
Regards,
Anuj

Similar Messages

Custom dynamic names for outbound payment files in R12

I have asked this on a couple of forums, but somehow missed this one.
We are upgrading from 11i to R12 and require custom dynamic file names for the Payments output files (cheques, advices, efts). I see that you can create a custom prefix and extension through payment profiles, but the functionality is very limited (i.e. no date stamp). I am thinking that others must have come across this before, and am wondering how you have handled such a requirement. Is it possible to add custom steps to the seeded payment process? Can the payment process be run as part of a request set and then a custom step added which grabs the output file and renames it based on information obtained from the batch and the process profile. Our goal is a fully automated payment process where batches are scheduled, processed and files renamed and sent out to banks and a 3rd party printer with no user interventation.
Any advice/tips would be appreciated.
Thanks.
Tam.

Hi Tam,
Could you please let me know if you got the solution as we have a similar requirement of renaming the output file as perthe business needs fro which we need custom program.
Thanks,
Manas

Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

How to create Same file names for source and target.

hi
Can any body send Procedure for below requirement.
how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
Please help me.
Thanks

Hi,
See the below link
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
Regards
Chilla

Action hard codes custom file name

I recorded an action to crop and save for web. I have done this 1000's of times over the years, but in CS6 it is hardcoding a Custom File Name, and in the wrong format too boot.
I am saving as JPG only and accepting the default name, which should leave me with an action that has no custom name, yet it does, and the custom name is of an HTML file name.
So, when I run my action, it names every single file the same name, and never creates a jpg.
This is a new bug in CS6. It wasn't here before.
I can't figure out how to get around it????
Kirk

Figured out a way to work around this, but it is irritating. Instead of my action doing this:
Flatten
Crop (user interaction)
Save For Web
Close (without saving)
I have to do this:
Flatten
Save as JPG (in same directory where I want the Web file to go)
Crop (user interaction)
Save For Web (Over top last saved file)
Close (without saving)
For some reason, when I use the save as JPG, it doesn't custom code the file name and when I save for web in the same place it also doesn't custom code the file name.
I never had to do this before in all the years of using this type of action, and I use it ALOT!
I have found that it sometimes does not hardcode the file name, but there seems to be no rhyme or reason.
Kirk
Photoshop CS6 on Windows7-64, haven't tested this on my MBP

[5D Mark III] Why begins my custom file name with an underscore

Hi everybody,
I am confused. I have set up a custom file name (Menu Screen: "Set Up 1" -> "User Setting 2") with 3 individual letters and the used image size. I set it up as "RAW" so the output should be like "RAWL0001.cr2" but the filenames are always using underscores instead of the first custom letter: "_AWL0001.cr2".
I have also tried the "User Setting 1" which has 4 individual letters and no indication for the image size within the file name.
Same here.
What baffles me most, is that the manual states that it is not allowed to use an underscore on the first position.
Anybody an idea?
Regards,
Oliver
Solved!
Go to Solution.

Look up "Setting the Colorspace" in your manual.
You've set the camera to shoot in ADOBE RGB which isn't advisable for the majority of users.
"A skill is developed through constant practice with a passion to improve, not bought."

Dynamic Receiver file name in AS2 adapter

Hi Experts,
How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
We tried selecting dynamic attributes file name but we are getting followin error in CC.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
Thanks,
Hari

hi hari,
You can't do it manually. As both adapter are in different context.
You can go with UDF to slove ur problem.
Just extract the input file name using Dynamic configuration
Store that in some variable.
Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
conf.put(key,strfilename);
Thanks
Jai
Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM

Custom File Extension for Microsoft Access Text Driver (*.txt, *.csv)

I'm trying to use a custom file extension for the Microsoft Access Text Driver (*.txt, *.csv) driver.
I have updated the FileExtns registry to have my new extension.
When I issue the following it does not work.
select [NoName]
from openrowset('MSDASQL'
           ,'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
                DefaultDir=c:\filedir'
           ,'select * from "file.lst"')
If I make the file a .csv it works fine. However, if it has an extension of not CSV or TXT (in this case .lst, which is in the registry setting) extension it throws the following error and cannot seem to find a solution to it.
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Text Driver] Cannot update. Database or object is read-only.". Msg 7350, Level 16, State 2, Line 1 Cannot get the column information from
OLE DB provider "MSDASQL" for linked server "(null)".
In addition, (although I can probably find this elsewhere), I need to have the first line 'BLANK' so that it does not miss data (there is no header row). Is there a way to use OPENROWSET without BULK to basically include all rows as data?
Any help is appreciated.

Hi,
According to your description, I did a test with your script, and got the same message as your post. Usually, by default, the Microsoft Access Text Driver (*.txt, *.csv) supports the four extensions file, such as *.asc, *.csv, *.tab, *.txt. To solve this issue,
I recommend you try to save the LST file in the above format, then use OPENROESET to get data from the supported extensions file in SQL Server.
In addition, the
OPENROWSET function is mainly used to retrieve remote data from an OLEDB data source, when you use OPENROWSET without BULK, provider_name is a necessary parameter in the script. However, the OPENROWSET (BULK...) is mainly called from a SELECT…FROM clause
within an INSERT statement, when importing bulk data from a data file into SQL Server table. Thus if you need to import bulk data, you should use the basic syntax: INSERT ... SELECT * FROM OPENROWSET(BULK...), also there are some alternatives, such as
BULK INSERT
and
BCP .
Thanks
Lydia Zhang

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

Custom File Name-Original File Number doesn't work. Why?

I want to export and rename some files with the "Custom File Name-Original File Number" option. Yet this doesn't seem to work, and I wondered what I might be doing wrong. The filename will only rename as the custom text.
The sample file name shown underneath has a dash after the custom text bit, but then the extension only eg Newname-.tif
I am now using LR 4.2 but I seem to remember doing this renaming OK with an earlier version (though I can't remember which). This suggest that either there is a problem with this specific version or that I have something set differently to the way I had it initially. I am hoping the latter is the case. Any suggestions as to how to fix this would be welcome!

I am sorry to report that i don't know how to create a screenshot. However, what I am getting, exact;ly is this:
From Library grid view: F2 or Library>Rename Photo
Then little screen appears with heading Rename Photo:
File Naming> set to Custom Name - Original File Number
Custom Text> NewFilenameHere
Example: NewFilenameHere-.tif
Clicking on OK changes the filename to just the custom text without the original file number. Original File name shows in metadata eg DSC01129-Edit.tif
The only way i seem to be able to get the original file number with the custom text is to include it manually as part of the custom text.

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

How do i change the HTML file names for existing index

Hi,
How do i change my existing HTML file names for indexes. The Html file name is disabled when we click on properties.
Ex: Index Keywork : Architecture
Old HTML Page/URL =: Architecture.htm
I want to change Old HTML Page/URL =: Architecture.htm to architecture_new.htm
Please find the screenshot attached.

That's because you are looking at the Properties and that is not how you create index entries.
Highlight the Index keyword ("Paste" in this example). It shows below what is already linked. If you delete that, the keyword will be displayed in bold to show no keyword is attached. You can add further keywords by dragging them from the Topic List.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I change the .php file name for a page of my site?

how do I change the .php file name for a page of my site? The only link to the page is the nav. button link for it in the global nav. The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.

The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.
I don't understand this reason. How would changing the file extension solve your breadcrumb issue? Why don't you explain the issue in more detail.

Displaying File Name for Photo and Video Clips in Premiere Elements 10

I am using Premier Elements 10 on a Windows 7 Pro desktop computer to create
a project consisting of 128 jpg photo and mp4 video clips. Before creating
the project I created a short file name for each clip describing its
content. I've added menu tags at locations which separate the project into
discrete segments. I've selected a disc menu which utilizes the menu tags I
created. I previewed the project and I'm satisfied that the DVD disc I
intend to create will display everything I want except for one thing. I
have spent several hours trying to find out how to have each displayed clip
include the file name (without extension) somewhere near the edge of each
window as it is opened in the finished production. I sure would appreciate
some help with the steps needed to accomplish this.

Welcome to the forum.
This can most easily be accomplished by adding a Title (maybe from a Lower-Thirds Title Template), above each Clip/Still Image.
I would create one such Title, and manually add the "File Name" in the location desired. Then, place that on a higher Video Track, above the Clip/Still. Then, just use the Duplicate Title function, to create a new Title, with the Text and Style, per the first - edit the Text for each, as required.
I know of no automated method to grab the Clip's/Still's File Name, and add that to a Title, as PrE does not support any scripting.
Good luck,
Hunt

Import tables using same file name for all tables

hi,
We are using oracle 11.2.0.3.0, we have taken export of multiple tables in schema, unfortunately in exp command we have mention same file name for all the tables, now it has created one file for all export but the size of that file shows that all the tables included in it , when we try to import the tables only last table mention in export command is imported for other tables it hangs, example of code show below.
Is there any way to import the remaining tables.
exp system file =exp05042013.dmp tables=gr.table1
exp system file =exp05042013.dmp tables=gr.table2
exp system file =exp05042013.dmp tables=gr.table3

Hi,
You can use as :
exp username@database tables=table1,table2 file=tabledata.dmpDid you have any RMAN full backup?
Why you are not recover crash database?
Mahir

Custom File name for AS2 FA

Similar Messages

Maybe you are looking for