Custom JCA Adapter / Application Error - Message.setErrorInfo() ??
Hi All,
I was looking for how to create a sensible Application Error in a custom JCA adapter and was excited to find the following page in the PCK info on Adapter Development:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/53d6409ff68631e10000000a1550b0/frameset.htm
The part of interest being:
<i>
The following methods are available to enable you to read error information in the form of an ErrorInfo object from the message, or to set the error information in a message.
Message.getErrorInfo()
Message.setErrorInfo()
If the synchronous response message is an application-error message instead of an application response, it must call setErrorInfo(myErrorInfo) for receiver adapters.</i>
However, I can't find these methods, or indeed the "ErrorInfo" object anywhere in the AF classes - does anyone know it's whereabouts? Or is the above page just out of date? If so, what is the new approach for creating Application Level Errors in a custom JCA Resource adapter (not Exceptions - I can do that)
Many thanks,
Chris
Well, you can get the latest jars from the SMP (Service Marketplace) directly. These jars are in the <i>XI ADAPTER FRAMEWORK CORE 3.0</i> component. Basically, http://service.sap.com/swdc then Support Packages and Patches->SAP NetWeaver->SAP NETWEAVER->SAP NETWEAVER 04->Entry by Component->J2EE Adapter Engine (PI/XI). There you'll see the XI ADAPTER FRAMEWORK CORE 3.0 link.
OR here is the direct link for the SP19 (latest) of <a href="https://smpdl.sap-ag.de/~swdc/012002523100009492712006D/SAPXIAFC19P_4-20000272.sca?_ACTION=DL_DIRECT">SAPXIAFC19P_4-20000272.sca</a>
Within this is <i>aii_af_lib.sda</i> which has the jars. You can use winzip or winrar to open .sca, .sda files.
Regards,
Jin
Similar Messages
-
Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.
Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.
Hi Olegchursin,
Please refer the KB : http://helpx.adobe.com/x-productkb/global/error-close-following-applications-continue.html
"Close SugarSync if the application displayed is ShellExtLoader." -
Custom JCA Adapter integration with BPEL
The stock FTP Adapter provided with BPEL does not have a feature I require, so I am creating a custom JCA FTP adapter that does only one thing: when it is invoked, it polls a directory for any existing files, and then returns the number of files in that directory.
The Adapter Developer Cookbook ( http://www.oracle.com/technology/products/integration/adapters/pdf/Adapter%20Development%20cookbook.pdf ) is about as clear as mud, and hasn't been updated for 10.1.3.
Are there any other resources that explain how you go from having your .java source files for your JCA adapter to having a working custom adapter in BPEL?Hello Tlwi,
I guess you already figured out of writing custom JCA adapter, do you mind sharing your thoughs or document you may have. I tried to follow the cookbook, but was really looking for sample template code which I can change to make my own adapter.
Thanks,
Chintan -
I need help with an application error message
AcroRd32.exe.- application error message appears. It states that The instruction @"0x60006db6" referenced memory at "0x60006db6". The memory could not be "read". Click OK to terminate program.
Please try to repair the Installation from control Panel-> Add Remove Programs-> Adobe Reader-> Repair.
-
RoboHTM.exe - Application Error message
In one of my RH5 projects, I'm getting the RoboHTML.exe
Application Error message "Instructions at ...referenced memory at
... . The memory cannot be read. Seems to happen when I try to
create a new template or when I try to change the template assigned
to a specific topic.
Each time the project crashed, I tried to recreate the same
template but it was already there. So I tried importing it but that
didn't work.
Although I'm using FlashHelp, which reports the hhp file as
"unused." I tried Peter Grainge's suggestion regarding deleting xpj
and cpd files and then using the hhp file to recreate my project
files. This was fine except all of the templates that I had created
vanished from the template folder. Because they were missing from
the Templates folder, I was again confused as to what I should do
as far as deleting or importing the templates to ensure that my
version info displayed in the topic footers..
I want to convert this project to Rh6 but am hesitant to do
so until I've debugged the problem with this intermittent
error.This has been covered in the forums before, but instead of searching, try this:
Search for the file "cmsnxeye.exe" yields three locations:
1) C:\Program Files\TARGUS\ACP50\Driver\CMdrv
2) C:\windows\system
3) C:\windows\prefetch\cmsnxeye.exeXXXXX.pf
Delete the files in BOTH 2) and 3) and reboot. Let the board know how you do.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
Firefox application error message 0x754d2009 why?
firefox application error message 0x754d2009 why?
It happen because of Malware/Virus problem.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
ITunes 7.1 won't start, invalid Win32 application error message comes up
I repeatedly tried to download iTunes 7.1 for my new iPod nano on my Windows XP, when the download completes and I try to run the program an error message comes up stating that iTunesupdate.exe is not a valid Win32 application...I have tried erasing iTunes completely then re-downloading it, tried re-intsalling but nothing works. I have been trying to get help for the past month now, no one seems to know anything, this is the last resort please help ASAP.
Thanx a bunch.okay, let's give this document a try:
iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application" -
Application Error Message. Need help identifying problem.
From time to time i get the following error message and I'm forced to shut Illustrator down:
Illustrator.exe - Application Error
The instruction at 0x0034d17c referenced memory at 0x00000014. The memory could not be read. Click on OK to terminate the program
Does anyone know what this means? This also occurs sometimes when I'm trying to select a font... for example Impact.. which isn't visible. Is the font corrupt? If so how do I go about obtaining a replacement? Whats going on here?
ThanksTry either fixing permissions or removing the user cache using Onyx or Applejack.
-
I get an Application Error message when installing TestStand 2.0
When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.
Hello Eduardo,
This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
Regards,
Roberto Piacentini
Applications Engineer
National Instruments
www.ni.com/support -
Modify Application: Error Message:: Object Variable or With Block variable
Hi Experts,
We just installed 5.1 on our server and once the application is installed.
When I try to modify the aplication I get this error at the end
This is step what the modify app does:
Check environment information
Drop Fact table index.
Modify fact table.
Update application information.
Set Fact table index.
Create stored procedures and comment table.
Increase application version and make legal consolidation table.
Make OLAP database and Journal/Audit reports. / Validate dimension formulas.
Error Message:: Object Variable or With Block variable
Any one has any any answer ? I will appreciate your help on this.
ThanksPlease check if Reporting Services is working properly.
Just open IE and type http://nameofserver/reports
If you receive any error then you have to fix that error verifying configuration of RS.
If RS is working make sure you add the right information into Server Manager Server Option for RS and Report Server virtual directory.
Also please check the tblappsetinfo to have all the fields completed (regarding servers).
Regards
Sorin Radulescu -
Adapter Engine Error Message on RWB
Hello
We are getting an Red color error message on Adapter engine on RWB
monitoring ---> Component Monitoring.
Here is the error message:
SLD access SLD host:port = sap03:50000
Error getting JPR configuration from SLD. Exception: No entity of class
SAP_BusinessSystem for XID.SystemHome.sap03 found
No access to get JPR configuration
Please advise for solving the error message on adapter engine.
Thanks & regards
AK
SAP Version : NW04 (XI 3.0) SP20Hi Senthil,
As suggested by others there is no problem with your communication channels ,,, the problem you face is because Your DBA has initiated the SHUTDOWN IMMEDIATE command. This will shutdown Oracle and terminate all active operations.
Please tell him to start the services and Wait until Oracle has been restarted by your DBA.
Regards
joel -
My nokia asha 201 fails to use all apps, facebook, whatsapp, mail, twitter and even fails to go at internet instead it gives me the message of application error, out of memory, memory error so what should i do to restore all these functions on my phone.
Emmanliko,
Welcome to Nokia Discussions!
You may need to restore your phones software. In order to do that, you must backup data on your phone before proceeding with this. Instructions can be found here at this page.
Good luck -
Application Error message takes more time in ECC
Hi All,
I am working soap to proxy synchronous scenario. when call is success i am able to get the response immediately from ECC within 2 to 3s.
when there is any application error in ECC it is taking more time to send back the fault message to SAP PI. more than 1 min(65s).
i tested the same payload in the sproxy in ecc. for application error it gives the fault message within 2s.
but when it comes to end to end testing ECC is taking more time to send the fault message to PI.
Please let me know if you have any suggestion to overcome this issue.
Regards,
MuniAbap team debugged and found out that there was an issue with RFC in ECC system.
RFC connection was not working. it was causing the flow to wait for 1 mins. Basis fixed the issue to make RFC working. now interface works without connection time out. -
CmSNXeye.exe application error message Targus related
My computer was attacked by a virus and MS antivirus fixed the problem. After re-booting I keep getting the following error message- "0x7c910f29" referenced memory at "0x000000000". The memory could not be read. CmSNXeye.exe application error. I called for service and was told it had to do with my Targus docking station and USB replicator. This error message comes up about every minute or so. When I click on it, it goes away, but it is annoying. Is there a solution to this problem that a computer illiterate person like me can solve?
This has been covered in the forums before, but instead of searching, try this:
Search for the file "cmsnxeye.exe" yields three locations:
1) C:\Program Files\TARGUS\ACP50\Driver\CMdrv
2) C:\windows\system
3) C:\windows\prefetch\cmsnxeye.exeXXXXX.pf
Delete the files in BOTH 2) and 3) and reboot. Let the board know how you do.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
Floor Plan Manager Webdynpro Java Application : Error Message area change
Hello Experts,
We have a Java Webdynpro Application inside the ESS business package ,delivered by SAP .
Is there anyway we can control the Error message area at the top of the Java webdynpro applications using the configuration controller without changing the source code for a particular Java webdynpro application???
I like to bold the error messsage and change the text color in the SAP Portal.
If not possible using the configuration controller, what are steps that we need follow to do this change.
Any help will be appreciated.
Thanks,
GreetsonThis cannot be done through personalization or any configuration.
If you want to change look and feel of error message then assuming these are personal information applications....you will be required to make changes to ess~per DC in NWDI or application specific DC in NWDI.
Still I believe...in web dynpro java....it will not be possible to change look and feel of standard error message area
Maybe you are looking for
-
I am trying to install Viber on my new iPhone4. After searching the internet it tells me that installation of Viber is FREE but my phone is asking me "Do I still want to buy and download Viber" Am I doing something wrong or do I have to pay for som
-
Purchase order wise payment details
Hi , Requirement : Report for Purcahse order wise payment details Is there any report , where we can see purchase order wise payment details
-
Automatic keyboard illumination
Hi, I've got a late 2011 macbook pro 13'' and seem to have a problem with the automatic keyboard illumination. When is set to automatic the backlight dims in low light conditions instead of brightening. I hold my finger in front of the light sensor a
-
Printer icon not in dock when printing
Since upgrading to Moutain Lion my printer icon had disappeared from the dock during printing. Previously it would show in dock when I was printing, Now nothing. Still able to print without issue and can see queue by going into System preferences. Do
-
Owa_util.redirect_url not working
Hi I created proces ON Submit: BEGIN apex_application.g_unrecoverable_error := true; owa_util.redirect_url('http://www.psoug.org', TRUE); END; After fired it I had 404 Not found The requested URL /apex/wwv_flow.accept was not found on this server whe