Custom Logi task flow is not working

I created a custom task flow for webcenter spaces login and deployed it using extending webcenter spaces, added it to one of my custom resource catalogue and then added it to the spaces login page. The login process works fine but the problem is that i am Evaluating an EL to check if the user falls under a particular group and if true then redirect him to a particular space. When i try login for the first time it authenticates but even though the user belongs to the desired group, the EL is still evaluated to "false", which in turn returns truw if i try login for the second time. i think the WCSecurityContext is not working for the first time. Any guesses why? or is there a different problem in the implementation. The EL is "#{WCSecurityContext.userInGroup['XYZ']}" where XYZ is one of the groups in OID.
Urgent Help required..............
Thanks in advance

try
securityContext.userInRole instead of WCSecurityContext

Similar Messages

Webcenter Spaces: Task Flow is not working in page made from template

Hi, I have a task flow in which there is one .jsff page, which has 2 Panel Group Layouts. In first one, there is a button, which has an action to close or open second Panel Group Layout. When i add this task flow to my template and Preview it, it is working fine(i.e on clicking button, second panel group layout is getting opened up)) BUT when i make a page and set its template to the one i made. On that page, this task flow is not working(i.e. on clicking button, second panel Group Layout does not open up). Not even showing any error in logs. Please provide a solution..??

What do you mean by Open/Close a Panel Group Layout?
Are you Setting rendered/visible property for PGL?
Are you setting the property programmatically or declaratively?
Thanks,
Husain

PageFlow in adfc-config.xml or in task-flow defination not working.

I want to share the data across multiple pages for a given taskflow. Hence kept the bean in taskFlow scope in adfc-config.xml. But bean is not getting instantiated when i try to print its value in one of page in taskflow.
<af:outputText value="#{pageFlowScope.PricingProfileSelector}"/>
I tried to put the bean defination in task flow defination and removed from adfc-config.xml. but still not able to instantiate it.
If the change the scope to session or request, the bean gets instantiated.
Any suggestion.!!

I am using any variable at all for now. This is my scenario.
<managed-bean id="__34">
<managed-bean-name id="__31">profileSelector</managed-bean-name>
<managed-bean-class id="__33">oracle.communications.brm.pdc.ui.view.selector.PricingProfileSelector</managed-bean-class>
<managed-bean-scope id="__32">pageFlow</managed-bean-scope>
</managed-bean>
<managed-bean id="__73">
<managed-bean-name id="__74">profileSelector1</managed-bean-name>
<managed-bean-class id="__72">oracle.communications.brm.pdc.ui.view.selector.PricingProfileSelector</managed-bean-class>
<managed-bean-scope id="__75">session</managed-bean-scope>
</managed-bean>
I am trying to print the beanclass.
<af:outputText value="#{pageFlowScope.PricingProfileSelector}"/> ----------// no output.
<af:outputText value="#{PricingProfileSelector}"/> --------value comes for this. oracle.communications.brm.pdc.ui.view.selector.PricingProfileSelector@1b6915d
I an wondering why PricingProfileSelector class does not get instantiated for pageflowscope when i try to print the class.

Create Custom ADF Task Flow for BPM

Hi,
I'm working an project on BPM and I'm required to create a custom ADF task flow with multiple views based on the human tasks in BPM. Since I'm new to ADF, could some one please give me some pointers?
Thanks,
Debojit

Hi,
You have to implement your own custom worklist screens for such a subject. As you know the OOTB worklist screen shows the logged-in users' assigned, etc. tasks. You have to implement the API of SOA workflow.
You can check Mark Nelson's blogs on Redstack to accomplish this. Hope this is the answer of the problem you are looking for.

Bounded Task Flow is not rendering

Hi all,
I am very new to ADF. I have a problem related to bounded task flows. I created bounded task flow with two simple steps like ViewX.jsff and EditX.jsff. Then I created a jsf page and put a splitter into main frame. On the left side of splitter, the master data of X is placed as read-only table. And in the right side of the splitter, I draged and dropped bounded task flow. It is render properly in jdeveloper editor, however when i run the page, bounded task flow is not displayed. I did some solution research about this problem in the forum. I implemented ADF Authentication and Authorization with HTTP Basic Authentication. I dont want a login form. I gave grants to anonymous-role and authenticated-role but it is still not working.
Indeed, I dont want to implement a security procedure at the moment. However, if i disable security, application throws an error message about permissions. Also, is there a way for running bounded task flow while security is not enabled?
Jdev Version: 11.1.2.2 JSF 2.0
Sorry for bad English.
Regards.
Anil.

Hi,
I have already given grants to Bounded Task Flow. However it is still not displaying when i run the page.
If i disable security, i am getting the following error log when i run a page with bounded task flow.
Error 500--Internal Server Error
java.lang.IllegalStateException
     at oracle.adf.share.security.SecurityContextImpl.createPermissionInstance(SecurityContextImpl.java:854)
     at oracle.adf.share.security.providers.jps.JpsSecurityContext.createPermissionInstance(JpsSecurityContext.java:386)
     at oracle.adf.share.security.binding.BindingPermission.createPermissionInstance(BindingPermission.java:88)
     at oracle.adf.share.security.binding.BindingPermission.hasPermission(BindingPermission.java:93)
     at oracle.adf.model.binding.DCBindingContainer.internalIsViewable(DCBindingContainer.java:3861)
     at oracle.adf.model.binding.DCBindingContainer.isViewable(DCBindingContainer.java:3821)
     at oracle.adf.controller.internal.binding.TaskFlowRegionController.resetViewableFlag(TaskFlowRegionController.java:456)
     at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:276)
     at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:124)
     at oracle.adf.view.rich.component.fragment.UIXRegion$RegionContextChange.doChangeImpl(UIXRegion.java:1392)
     at oracle.adf.view.rich.context.DoableContextChange.doChange(DoableContextChange.java:91)
     at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:762)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:525)
     at oracle.adf.view.rich.component.fragment.UIXRegion._preRenderView(UIXRegion.java:1043)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processEvent(UIXRegion.java:1005)
     at oracle.adfinternal.view.faces.lifecycle.PreRenderViewUtils$1.visit(PreRenderViewUtils.java:122)
     at oracle.adfinternal.view.faces.lifecycle.PreRenderViewVisitContext._invokeVisitCallback(PreRenderViewVisitContext.java:152)
     at oracle.adfinternal.view.faces.lifecycle.PreRenderViewVisitContext.invokeVisitCallback(PreRenderViewVisitContext.java:131)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:531)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:354)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitAllChildren(UIXComponent.java:437)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:415)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:695)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:558)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:354)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitAllChildren(UIXComponent.java:437)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:415)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:695)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:558)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:354)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitAllChildren(UIXComponent.java:437)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:415)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitChildren(UIXComponent.java:695)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:558)
     at org.apache.myfaces.trinidad.component.UIXComponent.visitTree(UIXComponent.java:354)
     at org.apache.myfaces.trinidad.component.UIXDocument.visitTree(UIXDocument.java:82)
     at javax.faces.component.UIComponent.visitTree(UIComponent.java:1518)
     at oracle.adfinternal.view.faces.lifecycle.PreRenderViewUtils._visit(PreRenderViewUtils.java:110)
     at oracle.adfinternal.view.faces.lifecycle.PreRenderViewUtils.__deliverPreRenderViewEvents(PreRenderViewUtils.java:61)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:997)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:339)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:237)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:509)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at oracle.adf.share.security.SecurityContextImpl.createPermissionInstance(SecurityContextImpl.java:848)
     ... 78 more
Caused by: java.lang.IllegalArgumentException: Invalid parameter: actions cannot be null
     at oracle.adf.share.security.authorization.ADFPermission.(ADFPermission.java:45)
     at oracle.adf.controller.security.TaskFlowPermission.(TaskFlowPermission.java:42)

My cover flow does not work on my 3rd gen 64 gb ipod touch

My cover flow does not work on my 3rd gen 64 gb ipod touch and neither does shake to shuffle.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Mail flow is not working Exchange 2010 to 2013 in coexistence mode

Hi ,
We are migrating Exchange 2010 sp3 to Exchange 2013.
mail flow is not working from 2010 to 2013, mails are qued up in smtp relay queueu.
already added 2010 ip address to 2013 receive connector and give anonymous permission.
but still mails are smtp relay queue.

Hi Sujith,
As requested by
Nithyanandham please post the error from Queue Viewer.
Few things to check.
Please remove IP address from "Default Receive connector" first.
Ensure both servers can ping by FQDN and it returns correct IP. i.e. ping exch2013.contoso.com
Make sure both exchange server can communicate each other. if possible try to telnet port 25 by FQDN of the Exchange2013 server and try to send an email from exchange2010 using the URL below. if there is any error please post error.
http://exchange.mvps.org/smtp_frames.htm
Make sure "Exchange server Authentication" is ticked in your default receive connector properties. If not ticked tick it and restart Transport service and check mail flow again.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Have had to reset several times , also log in doe's not work

1. Log in doe's not work correctly how do I get it reset ?
2. I have had to reset several times in the past two week's to get FF-23 to work properly (for a little while) , when FF-23 screws up it will not display content of some sites properly and will not allow link's within G-mail to open .
Any help for the above ?
Using Win-7 / 64
Do not have this trouble when using Chrome, DO NOT use Internet Exploder at all.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookie files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Customized strings in iPad viewer not working?

Hello,
per request of client i've tried to change one string in viewer for iPad. So i've created template in DSP App Builder, modified this template on my computer, choose this file in App Builder and prepared another build (V28). Unfortunately, i still see old original string (i've double tested that i'm downloading new version of app). When i now check DPS App Builder, it just says "Asset stored on server", so i asume, that everything goes smoothly on this side.
Any similar experience with customized strings?
Thanks
Martin

Everything was done from scratch with V28.
1. 10. 2013 v 16:14, Bob Bringhurst <[email protected]>:
Re: Customized strings in iPad viewer not working?
created by Bob Bringhurst in Digital Publishing Suite - View the full discussion
That's odd. It worked for me when I tested it. Perhaps you should try moving the current xml file to a different folder, downloading a new version, copying and pasting, and rebuilding.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5728130#5728130
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5728130#5728130
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5728130#5728130. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Task rule resolution not working

Hi Experts,
I have a created a rule in PFAC to determine possible agents for a task. I have assigned the same under "default rules" tab of task configuration. Rule container, binding between task container & rule container is also correct & in place properly. The rule standalone when tested (in simulation mode) does give the correct result. This possible agents determination is to ensure workitems can only be forwarded to set of people(possible agents) who are authorized. So i have set the task attribute also to "General Forwarding not allowed". The corresponding step for this task has been assigned an agent as an "expression" , this expression contains a user "USXXXX" at runtime which is a part of possible agents for a task detemined by the rule as explained above . Still at runtime workflow is unable to detemine the agent for that particular workitem indicating that none of the responsible agent belong to the possible agent. When i checked in detail, i found the that the rule itself fails to get the possible agents at runtime as it showed no possible agents when the workflow log was checked. So that's why there is no common thing between responsible agent & possible agents or intersection of responsible agents & possible agents is nothing. So runtime workflow does not come to know the agent to whom the workitem to be sent to so it creates a workitem with "no agent".
So kindly guide me why the rule resolution at task level is not happening properly.
Regards,
Chetan.

Hi Chetan,
My comments are below:
1. I have an expression to determine an agent at step level ...this agent is a responsible agent.
Ans. Correct.
2. To a task corresponding to that step, i have assigned under "Default rules" tab an agent determination rule as default rule
this rule i have created via PFAC. The list of uwer this rule gives i am considering as "Possible Agents".
Ans. Incorrect... this is again "Responsible Agent"
3. The Responsible agent determined by the expression at runtime is the user that is part of list of users determined by the rule
assigned at task level.
Ans. No, Resposible Agent is only what is determined by rule or is a expression. However the agents who receive work item is the intersection of Possible and ResponsibleAgent.
4. Task attribute is set to "General Forwarding not allowed" to ensure that workitem can only be forwarded to those user
that rule determines as mentioned in step2 & not to any XYZ user.
Ans. "General Forarding not allowed" only allows to forward work item to Possible Agents.
Hope this helps you...
Regards
Gautam

Norton Log-in Management is not working after downloading Firefox 4.0

Since downloading Firefox version 4.0, Norton Log-In Management no longer works as it used to. Prior to the download, and after signing on to Norton, the Log-In Manager would automatically populate any web page which requires me to log in. Also, the Log-In Manager no longer appears in the toolbar.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

ExecuteWithParams in adf Task flow is not executing

Hi,
I have a generic page fragment(Task Flow) which accepts a parameter from the calling page, when I use it as a Region.
Based on the value of the parameter passed I have to filter the table data or I have to execute a ViewObject .
For that I used a bind variable in the View Object.
And I dragged the ExecuteWithParams from DataControl to the Fragment defenition(TaskFlow).
<method-call id="ExecuteWithParams">
      <method>#{bindings.ExecuteWithParams.execute}</method>
      <outcome id="__90">
        <fixed-outcome>ExecuteWithParams</fixed-outcome>
      </outcome>Now the Issue I am facing is when I run the page, the jsff page is returning as empty. It is showing a message like "No data to display"
Also the Method call ExecuteWithParams is showing a warning that bindings is not known.
Studio Edition Version 11.1.1.2.0
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Please Help....
-Ranjith

Hi Arun,
I set the ExecutewithPrams as the default Activity, And I am getting the pageFlowScope parameter in the task flow, but while executing the execute with param I am getting a No data to display message in my table
here is my task flow
<?xml version="1.0" encoding="UTF-8" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="Test_definition">
    <default-activity id="__1">ExecuteWithParams</default-activity>
    <transaction id="__35">
      <new-transaction/>
    </transaction>
    <input-parameter-definition id="__21">
      <name id="__22">pCode</name>
      <value>#{pageFlowScope.pCode}</value>
      <class>java.lang.String</class>
    </input-parameter-definition>
    <input-parameter-definition id="__23">
      <name id="__24">pLabel</name>
      <value>#{pageFlowScope.pLabel}</value>
      <class>java.lang.String</class>
    </input-parameter-definition>
    <managed-bean id="__27">
      <managed-bean-name id="__25">TestCommonBean</managed-bean-name>
      <managed-bean-class>view.bean.TestCommonBean</managed-bean-class>
      <managed-bean-scope id="__26">request</managed-bean-scope>
    </managed-bean>
    <view id="TestCommon">
      <page>/TestCommon.jsff</page>
    </view>
    <method-call id="ExecuteWithParams">
      <method>#{bindings.ExecuteWithParams.execute}</method>
      <return-value id="__36">true</return-value>
      <outcome id="__7">
        <fixed-outcome>ExecuteWithParams</fixed-outcome>
      </outcome>
    </method-call>
    <task-flow-return id="rollback">
      <outcome id="__18">
        <name>rollback</name>
        <rollback/>
      </outcome>
    </task-flow-return>
    <task-flow-return id="commit">
      <outcome id="__19">
        <name>commit</name>
        <commit/>
      </outcome>
    </task-flow-return>
    <control-flow-rule id="__8">
      <from-activity-id id="__9">ExecuteWithParams</from-activity-id>
      <control-flow-case id="__11">
        <from-outcome id="__12">ExecuteWithParams</from-outcome>
        <to-activity-id id="__10">TestCommon</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <control-flow-rule id="__20">
      <from-activity-id id="__28">TestCommon</from-activity-id>
      <control-flow-case id="__30">
        <from-outcome id="__33">commit</from-outcome>
        <to-activity-id id="__29">commit</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__32">
        <from-outcome id="__34">rollback</from-outcome>
        <to-activity-id id="__31">rollback</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>

Standard shortcut for "flow" does not work anymore

Hi there :-)
The standard shortcut for setting the flow of a brush or stamp does not work anymore. When using shift + 0-9 nothing happens. It works correctly for the opacity when I use 0-9.
When I turn on the airbrush-mode it's not switching the commands entirely... Flow is still not settable with 0-9 but opacity cannot be set either by shift + 0-9.
I can access the opacity by hitting "enter" and then use the tab to switch to the flow but that's not what I wanna do.
Can anyone help my to find out what happened to These commands? The Shift-keys work fine btw... I'm using them for other commands (in and outside of PS) .
If anyone knows how to change these standard hotkeys let me know as well.
Thnx, Michelle

Which version of photoshop and operating system are you using?

Web Viewer embedded (custom domain) and button url not work!!! (Urgent!!!)

Many sorry for this question - we have a Web Viewer embedded (custom domain) that have all url (button with open in browser) that not work!
On tablet (Apple + Android) the button work great but on web viewer they do not work!
Any ideas to solve?
I see it: Where to place add externalLinksOpen : 'window' to FrameService?
web viewer URL links

Any ideas to solve?

My log in password is not working and I don't have the disk to restart

I have problem with log in password. I don't know why is not working. I don't have any CD with my Mac to reinstal.

If the OS is Mac OSX 10.7 Lion
Use Method 1 Using Recovery HD from the link below.
Best.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

Custom Logi task flow is not working

Similar Messages

Maybe you are looking for