Custom Map in flash using XML data for dynamic map and point of intrest loading...

Been some time since I have used Flash for anything...
I'm working on a little project to dynamically build a map
and set points of interest on the map. At this time I have the
(mySQL) data being queried and formatted with PHP and pushing the
data to Flash as XML.
In starting the project I'm a bit lost... I mean I have my
data and a good XML format but as it is I'm lost on parsing the
data in Flash and assigning its values to movie clips or other...
I've looked at the Loader Component and the XML Connector
Component and find I can get that to work at all...
My second though was to create a single movie clip on stage
and give it an instance name of "Background" and have it load the
URL of an image given in the attached XML doc... Node "a_zone" and
the value given to attribute "image"... But this brings me back to
square one of not quite understanding Flash and parsing XML... With
this second idea I would use AS to create a movie clip, set it's X
& Y cords and load an image to it based on the XML attributes
listed in the "Gatherable" node (one for each node).
Any suggestions, examples or related info is welcome...
Thanks in advance!

Okay, that really wasn't what I was looking for... But I did
go back and RTM :-)
Here's what I have... 1st frame:
2nd Layer: movieclip with the instance name "currentPicture"
The image loads into "currentPicture" from the URL given in
the XML "a_zone" node attribute "image" just fine....
But I'm not able to grab the attributes of each "Gatherable"
node it seems... am I missing something or just not pointing to the
right node?
I keep getting:
undefined
undefined
undefined
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"

Similar Messages

How to use XML Gateway for Order Import and Item Import?

Hello XML gurus,
I'm working in Oracle Apps area and do not have much knowledge on XML or web programming. Currently in my project there is a need to use Order Import and Item Import using interface tables and XML Gateway. The items/orders information will be in the XML format from Siebel system, there will be no custom processing...just process the data as-is.
I've read the XML Gateway user guide but did not understand much.
Anyone with similar implementation experience?
I'm looking for a step-by-step guide on what needs to be done in Oracle Apps side to populate the interface tables from XML file and call the import APIs?
Your inputs, suggestions, tips are highly appreciated. :)
Thx,
Jags

I have a similar requirement to automate the order import and was looking at XML Gateway. Please update if you were able to find more information.
- Ayyappa

Use cellular data for iTunes Match & Radio but not app Updates

Is there any way to set an iOS device so that it will allow using cellular data for iTunes Match and iTunes Radio but not downloading app Updates. I want to be able to set my wife's phone so that the apps are automatically updated over Wifi but she can then use iTunes Match and iTunes Radio when she is out. She only uses those in limited capacity so I am not too worried about her using up her data plan with those. However, app Downloads seems to be quite large, and they happened a lot recently when they all updated for iOS8.
Thanks,
Tony

No, but you could turn off Updates under Automatic Downloads in Settings>iTunes & App Store, then update them manually when you're connected to wifi.

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
 <CUSTOMER_ORDER_CONF_REP>
 <ORDER_NO>D555809</ORDER_NO>
 <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
 <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
 <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
 <CUST_NAME>Mr.Johan Matts</CUST_NAME>
 <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
 <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
 <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
 <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
 <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
 <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
 <BILL_ADDR_3>Watthala</BILL_ADDR_3>
 <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
 <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
 <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
 <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
 <ORDER_LINES>
 <ORDER_LINE>
 <LINE_NO>1</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1200</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID xsi:nil="1"/>
 <CHARACTERISTIC_VALUE xsi:nil="1"/>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>2</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1500</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>3</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>3</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1000</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>4</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1350</PRICE_TOTAL>
 <DISCOUNT>10</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>5</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>400</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>2</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 </ORDER_LINES>
 </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1. New Report
2. From Create New Connection-> XML
3. Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4. Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1 Billing Address 1
Shipping address 2 Billing Address 2
Shipping address 3 Billing Address 3
Shipping address 4 Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 LINE_NO CUSTOMER_PART_NO CUSTOMER_PART_DESC SALE_UNIT_PRICE PRICE_QTY DISCOUNT PRICE_TOTAL
Characteristic details belonging to Order line 1 CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
 CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
 CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

How to edit bitmap which is imported in flash using xml and save the edited bitmap back to xml in flash.

hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advance

Yes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well.

How to get & use xml data with jstl libraries? (URGENT PLZ)

I am using jstl to get and use xml data
I needs to perform operations on the parsed xml document with other libraries of jstl. How can i do that.
I used Dom variable to parse my document as:
<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
where my project.xml is:
<?xml version="1.0" encoding="iso-8859-1"?>
<project> <projectName>myProject</projectName> </project>
I can dislay this value in html by
<x:out select="$test/project/projectName"/>
But I need a string value sotred in variable such as <c:set var="pname" value="???">
HOW CAN I SET THIS VALUE IN CORE VARIABLE THAT IS, USING <c:set...> SO THAT IT CAN BE USED ANYWHERE IN JSP PAGE TO CONCATE RETURNED STRING IN OTHER STRING VARIABLES DEFINED BY CORE LIB?
Jessy
Message was edited by:
jessy
Message was edited by:
jessy

I believe that <c:set> should do that but i am facing problem in it. Look into this jsp scriptlet:
1-<x:parse varDom="test"> <c:import url="project.xml"/> </x:parse>
2-<x:set var="ds" select="$test/project/projectName"/>
3-<x:out select="$ds"/> 
4-<c:set var="tt" value="${ds}" />
5-<c:out value="${tt}" />
In line 3 variable ds returns: myProject
In line 5 variable tt returns: [[projectName: null]]
perhaps on line 4 ds is storing some array to tt and i am not calling correct array element. I tried many options but still could not find solution. Plz Plz do something urgent for me. Thanks
Jessy
Message was edited by:
jessy

SELECT statement using XML data taking way too long.

Hi all, I am using SQL Server 2005.
I have an issue which I find hard to describe. The server that I am using contains two test databases which are (supposed to be) identical. They both have tables named EVENTS with identical fields. I am using XML data to query and update data to this table.
When I run the SELECT in one database, against the EVENTS table it takes a long time. The longest I've kept it running is 2:30 minutes. When I run it against the EVENTS table in the other database the results are almost instantaneous. I've created a test
query to duplicate this behavior:
declare @ValidXMLInput xmlset @ValidXMLInput = '<EVENTS>
<EVENT EID="8077" EDATE="2014-07-20 10:15"
USERID="GTJ789" LOCID="7016" STATE="0" />
</EVENTS>'
SELECT Col.value('@EID','VARCHAR(5)'),Col.value('@STATE','INT')
FROM @ValidXMLInput.nodes('//EVENTS/EVENT') Tab(Col)
left join tblEvents on
tblEvents.EvIdNum=Col.value('@EID','VARCHAR(5)') And
tblEvents.EvDate=Col.value('@EDATE','DATETIME') And
tblEvents.UserId=Col.value('@USERID','VARCHAR(8)') And
tblEvents.EvLocId=Col.value('@LOCID','VARCHAR(8)')
where tblEvents.EvIdNum Is Null
Basically, the above query returns all rows in the XML table that are not in the database table. The results are then passed on to other statements.The columns in the join are key fields for tblEvents and have a PK index for both tables (in each db).
Now the issue that I am having. When I use an EID in the XML data of any other value (as presented in the example above), such as '3477' the query runs fast on both databases; however, when I specifically use an EID of '8077' then the query slows down to
a point where it takes more than 2:30 minutes (after which I cancel the execution). This only happens with one of the databases.
For testing purposes I've created an XML structure with only one item. Both tables have approximate 111 million records. One table contains about 900K records with an EID of 8077. The other table contains about 930K records with this EID. There aren't many
differences in the data. The records with the EID of 8077 (the slow one) are for different dates, users and locations. I should also mention that although the data presented here for EID consists of number, provisions exist where the number may be prefixed
by a letter; hence the varchar designation.
My question to you all is: How can I start troubleshooting this issue? Should I be looking at indexes?
I had some doubt about this because the query is fast for other EIDs. Why would it get "stuck" with this particular one?
Any troubleshooting advice is welcomed. Thanks! Saga
Insanity is the prelude to discovery

Some thoughts:
Is there a hardware difference between the two databases ? E.g. are they on the same disk (array) ?
Is there anything else running on your server besides your SQL instance ?
Do you see spikes in I/O, CPU or both ?
Maybe there is locking on one DB that's not happening in the other.
You should check indexes and statistics plus compare estimated execution plan between the two DBs.
Also check this links:
http://technet.microsoft.com/en-us/library/ms345118%28v=sql.90%29.aspx
http://technet.microsoft.com/en-us/library/ms345115%28v=sql.90%29.aspx

Dynamically update swf file in sharepoint using xml data

Hi,
I need some help/enlightenment on how to auto-update the swf file in sharepoint using xml data.
I am encountering an error "Cannot access External Data" and pointing to adobe's Cross-domain policy file extension.
My questions is:
1. Where should the cross-domain file be copied? In the sharepoint webserver's root folder?
Right now, we generate the swf file from xcelsius and manually upload them in the sharepoint. However, we wish to automate the data content of this file.
Thanks for the help.
Emerson

GetFileByServerRelativeUrl.... since you're getting a FILE, you'll need a URL to a FILE (not just a library)... by SERVER relative URL, so you'll need to include the site collection path and such, not just the subsite relative URL.
Now working fine....
url: appweburl + "/_api/SP.AppContextSite(@target)/web/ GetFileByServerRelativeUrl('/sites/apps/Shared Documents/test.txt')/CheckOut()?@target='" + hostweburl + "'",
method: "POST",
data: metatdata,

Creating schemas using xml data

Hi
I have a situation where I need to create
database schemas dynamically using <xml> data.
Any help in this regard will be much appreciated.
Thanks
Radheep

I'm not sure how to write a Web Service, however data can be read from a flat file using XML Data > Load, however the flat file has to be formatted with appropriate XML tags, such as...
<data>
<variable name="Test">
<row><column>1</column><column>2</column></row>
<row><column>10</column></row>
</variable>
</data>
In addition, you have to write a scriptlet that resides on a web server, with which Xcelsius can communicate. Once your data is formatted, it is as simple as referencing the file location in the XML Data URL: field.
Web Service is a very popular solution, and probably better than XML Data in this case due to the large volume of data. If you do a forum search for "Web Service" you'll find many threads regarding its usage.

Dynamically populating more than one field using xml data binding

Hi All, I have the following code that works fine to dynaically populate a second drop-down list2 from a choice in drop-down list1 using xml data biding. var tempString = "xfa.record." + this.boundItem(xfa.event.newText); var oItems = xfa.resolveNode(tempString); var nItemsLength = oItems.nodes.length; myinfo.page1.state.clearItems(); myinfo.page1.state.rawValue = null; for (var nItemCount = 0; nItemCount < nItemsLength; nItemCount++) { myinfo.page1.state.addItem(oItems.nodes.item(nItemCount).value); } Here is my xml file <?xml version="1.0" encoding="UTF-8"?> <myinfo> <country/> <countries> <item uiname="United States" token="US"/> <item uiname="South Africa" token="SA"/> <item uiname="Australia" token="AU"/> </countries> <state/> <AU> <item>Australian Capital Territory</item> <item>New South Wales</item> <item>Northern Territory</item> <item>Queensland</item> <item>South Australia</item> <item>Tasmania</item> <item>Victoria</item> <item>Western Australia</item> </AU> <US> <item>California</item> <item>New York</item> <item>Texas</item> <item>Michigan</item> <item>North Carolina</item> <item>South Carolina</item> </US> <SA> <item>Eastern Cape</item> <item>Free State</item> <item>Gauteng</item> <item>KwaZulu-Natal</item> <item>Limpopo</item> <item>Mpumalanga</item> <item>Northern Cape</item> <item>North-West</item> <item>Western Cape</item> </SA> </myinfo> I have two questions: 1) I want to be able to structure my xml in a way that I can populate a third drop-down list3 from a choice in list2. I need to know how to to include the different capital cities of the states in my xml data so that they can get populated in list3 from a selection in list2; 2) And be able to script the third list3 to get dynamically populated from a choice in list2. Thanks in advance for your help.

I would like to ask someone for help.
I have an XML file a result of the XSLT transformation. A schema was created based on this XML and this schema is bound to a form as a data source. When I preview my form using a Preview tab with transformed XML as a Data File in LiveCycle Designer 8.1, I can see only the first form data across 3 Text fields on the form. The rest of the forms are not getting displayed. What am I doing wrong?
Here is the part of the XML file Im trying to display on the form:
 FORM 1
 FORM 1 DESCRIPTION
 $5000
 FORM 2
 FORM 2 DESCRIPTION
 $7000
 FORM 3
 FORM 3 DESCRIPTION
 $4000
Part of the schema that was created based on the XML file from above:
Thank you.

"use cellular data for" apps keep turning back on

ie. go in, slide bar from green to off for facetime, youtube, etc...go out of Cellular, back in, and those apps show green for "use cellular data for".
At first I thought it was an issue with some versions of Angry Birds, as they don't all do this. Then realized facetime, youtube, facebook, etc.. all do this.
Works fine on two other iphones. Running latest ios on 4S
The fact it doesn't do it for all apps is what I find is strange. Thought at first it was an issue with Rovio apps, but then realized even facetime does this.
Thanks

I'd like to know why there is not solution to this. I think I'll just remove all those apps that are turning their 'use cellular' data back on. I only cared because when my kid plays angry birds, my cellular data was being used for videos. Oh well, I guess I'll have to remove apps or get a new data plan.
<Edited by Host>

"Use cellular data for" is only showing a few apps

Hello,
I just got a new 5S. I have installed and used maybe 15 or so apps, but when I go to
Settings -> Cellular -> "Use cellular data for"
it only shows 5 apps: Calendar, FaceTime, Find iPhone, Passbook, & Skype.
I would like to see all the apps so that I can control what is using cellular data. When I read other posts online, it seems like this should show all apps. Does anybody have any idea why I only see a few apps here or what I can do to display all apps?
Thanks for any help!

This troubleshooting guide helped me. Had to try up to step 7...
iPhone: Troubleshooting a cellular data connection

"Use Cellular Data For" is always on. I cant off this...

I am continuosly using the iPhone. Suddenly i cant restrict few applications from internet in the "Use Cellular Data For". But I cant access few app which has On flag in "Use Cellular Data For". If i disable this, its getting enabling after few seconds,. I reset everything. Nothing works
Thanks,
Jude

This troubleshooting guide helped me. Had to try up to step 7...
iPhone: Troubleshooting a cellular data connection

On iPhone 5c iOS 8.2, I go to settings, cellular, use cellular data for: Under "use cell data for are my apps but they are greyed out how can I ungrey them??

iOS 8.2 on iPhone 5c, goto settings, cellular, use cellular data for: all my apps under "use cellular data for" are greyed out. I've restart and hard reset. Looked thru all settings. Can someone help??

Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, did you try to switch off Cellular Data, restart the phone and switch it back on again?

Custom Map in flash using XML data for dynamic map and point of intrest loading...

Similar Messages

Maybe you are looking for