Custom message Template

Hello,
Do any of you know what message template to use -- so that when a Invoice approval is initiated the notification will contain :some cutom values in addition to the standard format for Open Notification -- we've been using "Open Mail (Templated)"message template.
Our managers and controllers want to see the supplier info and account #'s
in the notification -- so they can quickly approve
If making a custom template is the only way to do this - because a standard
(out of box) template doesn't have this info -- could someone please
forward along their procedures for making a custom template.
Thanks
vivek

Hello,
The Workflow Admin Guide should really read as follows.
If you create new custom templates, your custom templates should contain only the high-level notification layout and general information common to all e-mail notifications. You must name the message attributes for these templates with the same standard names as the message attributes for the standard templates. Do not create any new custom message attributes in your templates with nonstandard names, and do not reference any nonstandard attribute tokens in the template message body. A notification mailer can only token substitute the attributes in the message body if you use the standard attribute names. To include additional information in a custom message template, enter that information directly into the template message body, without using tokens
We had reviewed this issue and realized there there is no direct and supported way to token substitute custom tokens in the template without modifying the seeded PLSQL code. Above changed are reflected in the future releases of WF Admin Guide.
Sorry for the confusion.
Hope this helps.
Vijay

Similar Messages

Customized notification message template in Workflow Builder for iExpense

Hi Gurus!
I have a few requirements to change the notification format of the AME Expense Report Approval Message and one of which is to add a due date of the notification in the subject line of the email. So i have created a new message template, added in some attributes and point the notification to it. It works but in the email body it is missing some sections like the instruction text and the Previously Submitted Expenses section. The new message template has all attributes from the old message template so i'm expecting it to behave exactly the same.
We're on Oracle r12 and i use Oracle Workflow Builder 2.6.3.5.
Can you please help?
Thanks in advance.

Hi Patricia,
For
'358: Activity result code 'RESET' has no transition defined for it. All valid result codes must be modeled with specific transitions or a <Default> transition.',
you may have a function step defined in your workflow which could have a result type like 'Yes/No' but you may have defined the next step for the result type 'Yes' but not for 'No'. so you have to complete the flow for all of the result type of that function step.
for,
'383: Notification activity must be assigned a performer when used in a process.'
Open up the properties dialog of the notification in your process and click on the 'Node' tab, there at then end you can find a property called 'Performer' assign the following,
Type->Item Attribute
Value->Send to Role (or) Send to Email.
I guess this is a late response, but i just fixed these problem for my workflow and hence found your query !!
~ Vivek MS

Link in my customized Report Template doesn't work – Apex 3.1

I created a report template based on columns of my report
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE;
My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?
Apex version: 3.1
Edited by: mario_romero77 on Jun 8, 2012 10:06 AM

mario_romero77 wrote:
I created a report template based on columns of my reportAlways post code wrapped in <tt>\...\</tt> tags to prevent the forum software mangling it.
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE; My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
Is the report template definitely of type Named Column (row template) (defined on App Builder page 4000:4654) and not Generic Columns (column template) (defined on page 400:258)?
Note that the <tt>#ALIGNMENT#</tt> substitution string is not supported in named column templates. Set column alignment explicitly using HTML attributes in the template, or use CSS.
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
{code}Where do you see this? It looks like there's a mismatch between the report columns returned by the query and those referenced in the report template. Or the data contains unsafe HTML characters that aren't being escaped.
Yes, my report query has a column called ID and it's set as Hidden. This could be the problem. In a report based on a named column template any columns referenced in the template must be +shown+ in the report, even if (as in this case) the column value is not visible to the user: the positioning of the <tt>#ID#</tt> column placeholder in the <tt>onclick</tt> attribute rather than in a table cell is what makes it "hidden". *The Show checkbox for the ID column must be checked.*
From the gobbledygook being generated it looks like there could be a row selector checkbox column in this report as well? Named column row templates must include substitution placeholders for every shown column. It's also advisable to keep the columns in the same order in the SQL, report column attributes and row template.
Something like
{code}
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td class="t16data_edit">#CHECK$01#</td>
<td class="t16data_edit">#NAME#</td>
<td class="t16data_edit">#BIRTH#</td>
</tr>
{code}
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?If the above doesn't help then the easiest way to troubleshoot this would be for you to upload the app to apex.oracle.com and post guest developer credentials for the workspace so we can see the whole thing: template, SQL, and report attributes. Otherwise we're likely to and up with a lot of tedious to and fro here posting bits of code and attribute values.

Assigning new token to mail message template

Hi all
We are trying to put <%Vendor_Company Name%> token in RFx Invite template duplicate. However it is giving an error "Token not valid". Can there is a way by which this could be achieved?
Regards
Mudit Saini

Hi Tripti,
The only available tokens in the RFx Invite mail template are:
CURRENT_DUE_DATE The due date of the DA Document
DOCUMENT_HEADER_URL The reference to the vendors RFx Document
RFX_INTEND_TO_RESPOND_DATE The date the vendor must respond to this RFx by.
RFX_DUE_DATE The date the vendor must complete his RFx proposal by.
Apart from this there are global tokens available for all mail message templates.
These can be found in the RG - Mail Template Reference.
New/Custom tokens cannot be added.
Hope this helps.
Regards,
Subhasini

Custom message required on log on pop-up in SAP CRM WEB UI

We required custom message to the log- on popup, right now the message is coming after we give the user ID and password "starting SAP CRM" instead of that
user required welcome message.., how can achieve this ?
Please reply as soon as possible.

Hi Pankaj,
did you already check the guide in the CRM Wiki:
https://wiki.sdn.sap.com/wiki/display/CRM/WelcomeUserMessageinWeb+UI
Hope this answers your question.
Best Regards,
Michael

Custom RTF templates in Oracle Core Contracts ..

Hello:
We want to create custom RTF templates in Oracle Core Contracts along with custom data templates.
We do not want to use XSL-FO templates since we are finding this too complex to work with ... also the fact that the XML data is being generated by some internal OAF processes that we cannot control.
This is unnecessarily too complex for us.
Can we create our own reporting using XML -Publisher and integrate it in the system ?
Any thoughts on this would be appreciated ... Yesh

Srini:
I did read those pages and unless I am missing something .. it is basically saying the follwing:
Copy the seeded XSL-FO templates and make changes to them and then upload them back. I have no real access to the xml data since it is somehow pre-generated. I do not have a choice of using RTF templates along with the ease of Word based formatting.
The above process goes against the way in which we can write our own reports in XMLP:
(a) Create our own data templates (use our own SQL)
(b) Create our own layout templates (using RTF or XSl_FO)
So I am stuck into undertsanding .... OAF, Java API's ,etc that I should not have to understand to generate a report ...
yesh

Custom message is not getting displayed after raising do_not_save

Hi all,
In Order_save BADI, based some conditions, we were throwing custom messages.
FYI., code used,
CV_OWN_MESSAGE = 'X'.
MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
system throwing message like "The document could not be saved" only after execution of above message statement.
How can I overwrite this system message.
Any help would be highly appreciated.
-Mahi

Hi,
Please check the below notes
1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
1650635 - Work Center: problems when using BAdI ORDER_SAVE
Rg,
Karthik

Adding custom message on the login page

I have done the following to try and get a custom message to display on the oracle login page:
1:
In the System Administrator Responsibility, went into the System Profile Options and searched for "Local Login Mask" The default value was 32, I set it to 96. This was done because 64 is the number to display a "Corporate Policy Message" on the login page (32+64 = 96).
2:
Switched over to the Application Developer responsibility, and went to Application->Messages. Here I did a search for "FND_SSO_SARBANES_OXLEY_TEXT". A result came back with current message text: "Corporate Policy Message". I changed this to a test message and hit save.
3
Still in Application Developer responsibility, I went to Other->Requests->Run and chose "Generate Messages", for parameters I chose:
Language: US
Application: Application Object Library
Mode: DB_TO_RUNTIME
while leaving the others blank. I submitted this request and it completed normal.
4
I logged out of applications, closed my browser and cleared my cache. I went to login into the apps and at the login page... it does display "Corporate Policy Message" but it never updated it to my custom one.
Question: Do I need to restart the HTTP server or something to see the updated results? I am confused why it will display "Corporate Policy Message" but the value for FND_SSO_SARBANES_OXLEY_TEXT is clearly changed. Even when you go back into it and look.
The Generate Messages conc prog is a spawned process so I cant find out what its doing.
Any help would be loved!
OH PS
I know I started a previous thread on a similar topic, but the method has changed completely and I think it merits its own thread. My apologies if it shouldn't have been.

Hi;
What is your EBS and OS?Please check below thread
password-Lock User when enter password in wrong 3 times
Re: Lock User when enter password in wrong 3 times
Regard
Helios

Create a custom web template using VS 2012 with web features,site features sections applied

hi,
Want to create a custom web template using VS 2012 in my SP 2013 environment. i know "Vesku" has posted a great artice on this [ based on prev. version of SP].
here -
http://blogs.msdn.com/b/vesku/archive/2010/10/14/sharepoint-2010-and-web-templates.aspx
i am looking for a code based article which has step by step process which provides how to add the site features, web features and attach the eventreceivers etc etc on sitecollection creation when i apply this template from central admin.
can anyone provide me any links / any source how to create a custom web template with one / two custom features - site features element and web features element , / master page etc ....
I am stuck with this. as part of my reqmnt, i need to create a webtemplate with all the customlistinstances, custompagelayouts, custom masterpages, custom appln pages, custom web parts.
help is appreciated !
Das

The problem is that Web Templates are deployed to a gallery in a site collection and aren't available in Central Admin when creating a new site collection. YOu have to create the site collection without choosing a template and then choose your web
template when you first access the root site in the site collection. Here's an article that discusses that process here:
http://sharepointchick.com/archive/2011/02/10/using-web-templates-to-create-site-collections.aspx
Other than that Vesa's article is still the best one and works essentially the same in 2013 as it does in 2010.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Custom report templates with the help of BI Publisher.

Hi All,
I have created custom report templates with the help of BI Publisher it is working as we excepted.
refered : https://blogs.oracle.com/kyle/tags/reports
But our requirement want to change the color of heading and include filters in output report, It is possible, if yes pls share you comments?
Best Regards
Pradeep

how silly of me!
just restarting the tomcat sorted the problem!!!

Custom message on list view in SharePoint 2013

Hi,
I have created a list with multiple view and i set the target audience for each view.I set the views for each dept.So when a person not belongs to the corresponding group click on the other view,he will get a custom message like " you are not authorized
member for this view".
Can you help me to figure out this?
Thank you

Hi Aditi,
According to your description, my understanding is that you want to display custom error message when a user who does not belong to the corresponding group clicks the view.
Per my knowledge, the view will not be available if the target audience is set for the view and the user does not have permission to access the view.
If the target audience is set based on the groups, then the user who does not belong to the group will not have the permission to see the view on the view menu, and he will not be able to click the view.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

How to create a Custom form Template..

Hi Eperts,
I would like to seek a help from you regarding creating a custom form template on custom BO. could you guide me where i have gone wrong in successfully creating a Print form. I am in dead need of this particular solution for a client. It is hampering my entire scenario......
1. I had created a Custom BO and I am trying to preview the created form on the OIF screen.
2. I had created a form on above of the custom BO. This created form and form group is activated and configured as of needed by opening it through ALD (Adobe Life Cycle Designer).
3. I had created a BAC element with some scoping questions and activated it. After activating it i had deployed the Business configuration.
4. my solution got updated with the created and deployed BAC elements and i had done scoping for those elements to make my created form available.
5. I can see my form template in Form Template maitaince under Application user managment WOC. I had made it to be available for all users and published.
6. All the above steps are done success fully with no errors.
7. When i accessed my custom BO and tried to preview the created form i am unable to view it and i am seeing the following window.
Could you help me out in solving this or send me across any detailed document regarding this what you had done previously.
Thanks in advance for your valuable help...
Regards...
Hanu K

It looks like system didn't identify the form template. So please check if the required configuration for "Preview" modal dialog is done properly. In the SDK documentation, refer to section "8.4.3.4 Create a Preview Button for a Print Form"
If you have already done the steps mentioned in the section 8.4.3.4, but still facing the issue then let me know.
Best regards,
Hari

Web-based BEx: How to display a customized message on the variable screen??

Hi All,
I'm now using the web-based BEx. Recently I want to display a customized message (e.g. the usage of the report) on the first page (i.e. the variable entry screen) of the query. Is it possible?
Thanks.
BR,
M. Ng

Hi marco,
Check here. itmay help you.
Custom Messages WAD
Thanks,
Vijay.

Display a custom message on click of a Top Level Navigation Object

Hi Experts,
when the user clicks on the top level navigation entry link(for any application), I would like a custom message to be displayed to the end-users which would be maintained in a text file in a KM folder.
Currently, on click of the top level navigation link a workset map is displayed. But now I would like to read the text file and display the message (if any) maintained in the text file.
The message (if any) should be rendered before the workset map is displayed, or be rendered as an additional element on the same page as the workset map perhaps as an additional iView .
It is essential that the message content should not be cached by the Portal (in other words, the deactivation of the system message should not require a cache flush to become visible to the user).
The goal is to warn the users before they they access the applications of the workset map.
Can someone please guide me on this???
Regards,
Anurag

Hi,
See some info regarding Portal Eventing:
http://help.sap.com/saphelp_nwce72/helpdata/en/a5/8d1e72c20f4db2b9f577b47c1a47da/content.htm
In the link above you can see that it's possible to raise an event and subscribe to it.
Each time you navigate in the portal, the portal raises the UpdateTLN event so all you need it to subscribe to it in an iview that is located on the same page.
Since the masthead iview is in the same window (above the TLN - see the following link) you can put your javascript function in it.
http://help.sap.com/saphelp_nw04/helpdata/EN/b4/771158e4cb4bf6af9974380948db86/content.htm
Regards,
Omri

Custom message Template

Similar Messages

Maybe you are looking for