Custom method to activate and de-activate custom fields.

Hi All,
I have appended 3 fields on sap std structire incl_eew_pd_item_csf_sc.
The requirement is by default the 3 fields will be not active.The custome fileds will only be changebale if G/L
account of thr item is maintained in table ztable.so i need to develop one custome method & custom class.
If g/l account is not maintained in the dedicated ztable ,these fileds will be de-activated & not ready for enduser.
In case of cost distribution on line item level, the three custom fields will be activated if at least one account assignment line of the item contains a G/L listed in ztable
what code should i write in the method?
Please give any suggestion.
Regards,
Oorvi
Edited by: oorvi joshi on Sep 29, 2009 2:52 PM

Hi,
Correct me if my understanding is wrong.
You have some custom fields shown in the screen which were added to the standard structure.
You want to control the display of those custom fields using the entry in ztable.
If that is the case, depending on the entry in the ztable u can use
   LOOP AT SCREEN
          IF screen-name EQ 'XXXX'.
                disable the field
                Modify screen.
          ENDIF.
   ENDLOOP.
-> U can create an implicit enhancement to create ur custom code.

Similar Messages

Unable to locate the xml-definition for FieldName with FieldId '1f8a351c-965d-4927-9c22-8772b7089f55' when trying to activate feature with references a custom field type

I´ve a solution which contains a custom field type (found somewhere on the net, the custom field type maps a choice field to managed metadata). There is a second solution which contains site column and site content type definitions using the custom field
type definition from field type solution.
On my developement environment, there is no problem with this two solutions. When field type solution is deployed, i can deploy the content type solution and activate the feature and everything is fine.
However if i give the two solutions to our adminstrator to deploy them into our staging environment, content type feature activation fails. Deploying the field type solution makes no problems. The field type is then available and i can manually creates
columns with this new field type. However activating the content type solution fails with the error shown in the title of this message. The FieldID from the message is not part of my content type project. Searching the net doens´t show any results for that
id. So i think it´s not some of the standard field id´s from sharepoint.
Can anyone help?

Stack Trace
Unable to locate the xml-definition for FieldName with FieldId '1f8a351c-965d-4927-9c22-8772b7089f55', exception: Microsoft.SharePoint.SPException: Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) ---> System.Runtime.InteropServices.COMException (0x8000FFFF): Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes) -
-- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetGlobalContentTypeXml(String bstrUrl, Int32 type, UInt32 lcid, Object varIdBytes)
at Microsoft.SharePoint.SPFieldCollection.FetchFieldsFromWeb()

Activate Customer field in delivery address in PO item screen

Dear Experts ,
In PO Item details ,delivery address tab , I want to activate the customer field ( between the address & Vendor tabs ) .
Please tell me where can this be done ?
Regards
Anis

Hello Jurgen ,
Thanks for the response .
Our basic requirement to have a customer number tagged with a PO item is to have a retrospective analysis report to know what services /material & amount have been spent in order to facilitate a customer. These are freebies that the company provided the customer, but its analysis would help the us to understant customer wise freebies / facilities provided.
It would be great if you could tell us the way to activate the customer number field in the PO item details . Using address does not serve the said purpose .
Thanks & regards ,
Anis

How to transfer SRM PO Condition Type and Custom fields to ECC?

Hi All,
I have a scenario to transfer SRM Line item condition types and few custom fields to ECC.
I have found the following things but structure 'CI_EKPODB' does not exists in ECC.
I am using 'SRM 5.00' and 'SAP ECC 6.0'.
NOTE: I have to transfer condition records when PO is getting created / modified.
1) Earlier I was planning to use BADI 'BBP_CREATE_BE_PO_NEW' in SRM and this will transfer the data to ECC in case of PO
    Creation.
               It contains the Condition fields to be passed to ECC.
But i am unable to implement the same, whenever i create implementation when i click 'Activate' its getting activate then after few seconds its getting deactivate, i think this is because this BADI is not allowed for multiple use and SAP has already made one implementation on the same.
2) I need to implement BADI 'BBP_ECS_PO_OUT_BADI' in SRM and 'BBP_PO_INBOUND_BADI' in ECC.
SRM BADI will pass verified field details to ECC as a custom fields
       It does not contains the Condition fields to be passed to ECC, so i was planning to pass the same as custom field(s).
ECC BADI 'BBP_PO_INBOUND_BADI' will be used to map the fields to correct place and this should work.
i need to modify the structures and pass all the custom fields (z-fields) - (CI_EKPODB but does not exists kindly suggest) as data.
Other required details:
      Transfer of PO does not supported by SAP for service PO's, any suggestion on the same?
Expecting quick reply from your end.
Thanks in advance.
Regards,
Hemant

Naresh,
Thanks for quick response.
My concern is this BADI 'BBP_CREATE_BE_PO_NEW' will trigger only in case of creation, not when PO is changes.
I have to transfer condition types and custom fields to ECC in both the case (create / change)
If i have to do this only in case of creation then i can pass Condition types / custom fields then i can use parameter 'CS_PO1_DOCUMENT' from method 'FILL_PO_INTERFACE1'.
this parameter contains 'IT_POCOND', 'IT_POCONDX' and 'IT_EXTENSIONIN' as parameter so my problem will be solved.
But i dont think this will trigger in both the cases and 2nd thing i cann't implement the BADI since its not marked for multiple use so i am unable to implement the same.
Kindly correct me if i am wrong.
Once again thanks for your reply.
Please suggest on the same.
Regards,
Hemant

Adding custom field in ME2B and business function activation

Hi Experts,
I have one requirement for adding one custom field in ME2B for ALV output. From some old thread i come to know we have to implement BADI "ME_CHANGE_OUTTAB_CUS". But when i search for this BADI its not available.
For this BADI suppose we have to activate one business function MM, Integration of Materials Management and Financial Accounting (LOG_MMFI_P2P).
I want to know if we activate this business function then what are the changes will happen in our system(In standard transaction).
Please revert.
New fields addition in ME2L Report
BADI ME_CHANGE_OUTTAB_CUS
Thanks,
Venkadesh

Hi Team,
I resolved this issue using enhancement without using BADI. My team not ready to activate the Business so i moved to implicit enhancement.
Inside method " if_reader_mm~read_table." in include "LMEREPI02", we are getting the Fieldcatlog and dynamic table for output. Here i have added my custom field and changed the dynamic structure with reference " ex_table_ref ".
I know this is not a proper way to do, but it is not affecting the standard process.
Thanks,
Venkadesh

Passing Custom fields to Req and PO

Hi,
We are on SRM 5.0 and ECC 5.0.We are using the classic scenario .I am trying to transfer the catalog ID from SRM shopping cart to R3 Req .There are number of threads in this forum that describe the procedure, which i understand.
But now if the Req is converted to PO in R3 either manually or auto, does the custom fields also get transferred automatically ,if i maintain the same custom fields in CI_EKPODB & CI_EKPODBX? or is there anything else i need to do.
Thanks
Raghu

Hi
Besides BBP_CUFMAP, you have to of course :
- create the same Zdata element datain ECC as you have done it in SRM.
- maintain CI_EKPODB with append of your Zdata element
- create CI_EKPODBX and activate it !
Then you will be able to sea your Zdata element (or CUF) in the EKPO table.
You don't need to use BBP_PO_INBOUND !
Re: Update Custom Fields in PO - BBP_ECS_PO_OUT_BADI
Re: Mapping fields in SRM with R/3
Also, Please refer to SAP OSS Notes 672960 and 485891.
The BADIs in SRM which can used in this case, using transaction SE18 are 
BBP_TARGET_OBJECTS
BBP_TARGET_OBJTYPE
In SRM Customization
In the following step : " Go to SRM --> SRM Server --> Cross Application Settings --> Define Objects in Backend System --> go to external procurement and select the function from the drop down box", it says "purchase order if item data is complete, otherwise Purchase Requsition.
Related links for source code and other configuration ->
R3 field is not populated????
implementation of BADI BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI
Custom field values are not being transfered to the backend system
Re: custom field values not passed to R/3
Do let me know, incase you face any issues.
Regards
- Atul

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

RFBIBL00 mode 'D' and customized fields

Hi all,
I have used transaction OXK3 to created customized text fields(ZTXT1) in both CI_COBL and CI_COBL_BI structure and run program RFBIBLG0 to activate custom field in RFBIBL00.
It works only in 'B' Batch input mode but not in 'D' Direct input mode. In 'B' mode, data has been passed to the field but not in 'D' mode.
How should I do to make this work?
Thanks,
Phon

hi,
Use the BADI "BBP_CUF_BADI_2" for custom fields.
BR,
Disha.
Pls reward points for useful answers.

Custom field in 'Notes and Attachment" tab of shopping cart

Hi All,
I am working in SRM 7.0 classic scenario and i have requirement in which i need to add custom field in 'Notes and Attachment" tab of the shopping cart portal.
I have added those fields in structure --- INCL_EEW_PD_ITEM_CSF and INCL_EEW_PD_ITEM_CSF_SC.
Also implemented the BBP_DOC_CHANGE_BADI in while i am populating the custom field value.
I have created custom field as INPUT FIELD in webdynpro component /SAPSRM/WDC_DODC_NA and view : V_DODC_MAIN_VIEW.
Now I can see the custom field value in table BBP_PDISC, but i am not getting the value in Shopping cart "Notes and Attachments" tab.( I am able to see the field but not the value of it).
The value is getting populated in ITEM DATA tab instead.
Please suggest if i am missing anything in the process and how to achieve this.
Thank you in advance.
Thanks,
Satheesh

Hi,
You have done everything.. well.. except that you did not set the attribute of the input field to this value.
When you have value u just need to bind it using set_attribute method of the element.
Use ctr+f7 to generate the wizard .. select in set mode.. click on context and select the attribute that you have created in the context.
Hope this helps.
Regards,
Vinay

In LSMW how to include customer fields in BAPI method ?

Hi all,
We have a requirement to use BAPI method in LSMW. We have some custom fields defined needs to be handled in BAPI structures.Please tell me how to handle BAPI extension structures(EXTENSIONIN/OUT) in LSMW.

Hi Venugopal,
You can use the sold to party field fiield for your requirement.
Press f4, you will get a pop up to select customer depending on various selection criteria including customer name.
If can enter the customer name, which will sort out the sold to party number whihc you can use.
If this is not wat is required you have to copy the transaction and create a new Zreport.
Hope this helps you.
Thanks
Arun

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

GET_V Method is not called for custom field

Hi,
We are using CRM 7.0
I have enhanced component BT120H_CPL and added custom fields into view Details with AET. I am trying to implement search help which depends on another field. I have created V-GETTER for my field and tried to implement search help in this method. However, this method is not called in the program scope.
I have debugged the application and result is :
V_GETTER method GET_V_ZZAFLD00000D is created in class ZL_BT120H_C_DETAILS_CN00. It should be called from GET_V_S_EXT method but this method is called in class CL_BT120H_C_DETAILS_CN00 and exception occurs since GET_V_ZZAFLD00000D doesnu2019t exist in class CL_BT120H_C_DETAILS_CN00.
I tried similar scenario : add search help to existing field of another component. However I couldnu2019t able to run GET_V method again.
( It works when I write search help id in the AET but in this way I cannot pass import parameter to it )
Is there anything I am missing ? Thanks in advance for helps.
Regards
Abdul.

Hi,
Then, the next possible thing is checking the "enhancement set". Press F2 keeping the cursor on any field and check if the view is showing up as enhanced. Find this information under "Active Enhancement set" in the popup details. If this does not happen, then your enhanced view is not being used. You may want to check the COMPONENT_LOADING BADI if you are using more than one assignment set. You may also want to look at this WIKI.
[http://wiki.sdn.sap.com/wiki/display/CRM/HowToEnhanceaWebUIComponentinSAP+CRM]
Regards,
Arun Prakash

LSMW : Idoc method , Business Activities custom fields data upload

Hi guys
I am uploading Business activities using LSMW IDOC method and below message and idoc type
Message type CRMXIF_ORDER_SAVE_M
Basic idoc type : CRMXIF_ORDER_SAVE_M02
Using EEWB I added few fields to business activities , along with the standard fields I want to upload the customer fields also .
I tried to Extend the Basic idoc type CRMXIF_ORDER_SAVE_M02, but it was not allowing me to Extend ( since it is generated basic idoc type ) I tried the other Basic idoc types for Business activities , I got the same problem
the basic idoc type contains only two Segments
E101CRMXIF_CUSTOMER_H_X (parent)
E101CRMXIF_CUSTOMER_H (child)
with out my custom fields
pls help how can i add my custom fields ( added by eewb) to the basic idoc type
for uploading custom fields
thanks in advance
Warm regards
Rajasekhar

You are going to need to create an enhancement of the standard IDOC type in order to get your custom fields to show. I can't remember the exact procedure, but you will need to create a Z-type based on the existing type in the system. When you generate the z-type the fields will be filled in.
Look at the following thread and it will give the basic steps
How to delete Extention
Good luck,
Stephen

Project server 2010 What are the number of Custom fields and views allowed?

How many customizations are permitted in Project Server 2010?
Thanks in advance

Hi
new findings on that issue...
There is an article for Project Online that speaks about limits for reporting: https://support.office.com/en-US/Article/Project-Online-software-boundaries-and-limits-5a09dbce-1e68-4a7b-b099-d5f1b21ba489?ui=en-US&rs=en-US&ad=US
Apart from that you will have an issue if you like to upgrade to Project Server 2013. When trying to convert the 2010 databases to a 2013 database a SQL stored procedure will fail if you have more custom fields than fit into the UserViews.
Error message will be something like this:
System.Data.SqlClient.SqlException (0x80131904): INIT METADATA ERROR! At least one mismatch found between SQL schema for view MSP_EpmProject_UserView and reporting metadata. Call to MSP_Epm_CheckIntrinsicAttributes failed for Projects INIT
METADATA ERROR.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Office.Project.Server.Data.SqlSession.ExecuteNonQuery(SqlCommand command) ClientConnectionId:21f11abd-7388-48a0-a029-b5161fcb2dc8
Workaround for the issue (UNSUPPORTED !!!!!!)
Execute the Convertto-SPProjectDatabase script. Now you need to be fast or well prepared. You need to find the MSP_Epm_CheckIntrinsicAttributes stored procedure. Execute an ALTER statement for it and change the last lines of code to something like this:
LblError:
   PRINT @ErrorMessage
--changed RETURN code if an error occurs to be able to proceed with migration
--RETURN 1
   RETURN 0
END
I hope that helps someone out there - when I came across the issue last night, a google query returned nothing for INIT METADATA ERROR....
Regards
Christoph
Christoph Muelder | Senior Consultant, MCTS, MCSE | SOLVIN information management GmbH, Germany

2 Custom Fields-create and display

In addition to the standard fields available within the Whou2019s Who service, we need to create and display 2 custom fields within the employee search functionality in ESS.
Can someone walk me through the steps please?

Hello,
There are 2 sections of search available.
1 is normal search and 1 is advances search.
Well for advanced search you can very much follow my earlier reply.
And you can also have a look at below thread...
ESS Who is Who - Add search criteria
I guess you want to add extra field in normal search.
I am not sure how to do it....as Siddharth (In link I pasted above) says that he himself have never seen any changes in normal search.......
But still you can give below method a try.....
http://wiki.sdn.sap.com/wiki/display/profile/ESS%2bPersonal%2bInformation%2bUI%2benhancement%2bwithout%2bmodification?bc=true

Custom method to activate and de-activate custom fields.

Similar Messages

Maybe you are looking for