Custom non-PersistenceCapable classes used as keys in Maps and/or SortedMaps?

Hi all,
I need to support custom non-PC classes as keys in SortedMaps. It takes
custom coding to the Kodo API right now, and before embarking down that
road, I wondered if anyone out there has already done this and is willing
to share that code.
Thanks!
--matthew

Matthew-
Can you just make the key implement Serializable and store it as a blob
(which means that you will not be able to query against it), or do you
have other restrictions?
In article <c90i4b$22k$[email protected]>, Matthew T. Adams wrote:
Hi all,
I need to support custom non-PC classes as keys in SortedMaps. It takes
custom coding to the Kodo API right now, and before embarking down that
road, I wondered if anyone out there has already done this and is willing
to share that code.
Thanks!
--matthew--
Marc Prud'hommeaux
SolarMetric Inc.

Similar Messages

What are the classes used for bropdownListBox in BSP and purpose and how

what are the classes used for bropdownListBox in BSP and purpose and how
thank you,
Regards.
Jagrut BharatKumar Shukla

Benje001,
Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
Hope that helps!
Regards,
Shannon R.
Applications Engineer
National Instruments

Af:inputListOfValues sets value of first item in result set when using enter key or tab and component set to autosubmit=true

I'm using JDev 11.1.1.6 and when I type a value into an af:inputListOfValues component and hit either the enter key or the tab key it will replace the value I entered with the first item in the LOV result set. If enter a value and just click out of the af:inputListOfValues component it works correctly. If I use the popup and search for a value it works correctly as well. I have a programmatic view object which contains a single transient attribute (this is the view object which is used to create the list of value component from) and then I have another entity based view object which defines one of its attributes as a list of value attribute. I tried using an entity based view object to create the LOV from and everything works as expected so I'm not sure if this is a bug when using programmatic view objects or if I need more code in the VOImpl. Also, it seems that after the first time of the value being replaced by the first value in the result set that it will work correctly as well. Below are some of the important code snippets.
Also, it looks like it only doesn't work if the text entered in the af:inputListOfValues component would only have a single match returned in the result set. For instance given the result set in the code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy
If we enter Cha, the component works as expected
If we enter A, the component works as expected
If we enter Jimmy, the component does not work as expected and returns the first value of the result set ie. Brad
If we enter Fred, the component does not work as expected and returns the first value of the result set ie. Brad
I also verified that I get the same behavior in JDev 11.1.1.7
UsersVOImpl (Programmatic View Object with 1 transient attribute)
import java.sql.ResultSet;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import oracle.adf.share.logging.ADFLogger;
import oracle.jbo.JboException;
import oracle.jbo.server.ViewObjectImpl;
import oracle.jbo.server.ViewRowImpl;
import oracle.jbo.server.ViewRowSetImpl;
// ---    File generated by Oracle ADF Business Components Design Time.
// ---    Wed Sep 18 15:59:44 CDT 2013
// ---    Custom code may be added to this class.
// ---    Warning: Do not modify method signatures of generated methods.
public class UsersVOImpl extends ViewObjectImpl {
    private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
    private long hitCount = 0;
     * This is the default constructor (do not remove).
    public UsersVOImpl () {
     * executeQueryForCollection - overridden for custom java data source support.
    protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
         List<String> usersList = new ArrayList<String>();
         usersList.add("Brad");
         usersList.add("Adam");
         usersList.add("Aaron");
         usersList.add("Fred");
         usersList.add("Charles");
         usersList.add("Charlie");
         usersList.add("Jimmy");
         Iterator usersIterator = usersList.iterator();
         setUserDataForCollection(qc, usersIterator);
         hitCount = usersList.size();
         super.executeQueryForCollection(qc, params, noUserParams);
    } // end executeQueryForCollection
     * hasNextForCollection - overridden for custom java data source support.
    protected boolean hasNextForCollection (Object qc) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         if (usersListIterator.hasNext()) {
             return true;
         } else {
             setFetchCompleteForCollection(qc, true);
             return false;
         } // end if
    } // end hasNextForCollection
     * createRowFromResultSet - overridden for custom java data source support.
    protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         String user = (String)usersListIterator.next();
         ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
         try {
             populateAttributeForRow(viewRowImpl, 0, user.toString());
         } catch (Exception e) {
             LOGGER.severe("Error Initializing Data", e);
             throw new JboException(e);
         } // end try/catch
         return viewRowImpl;
    } // end createRowFromResultSet
     * getQueryHitCount - overridden for custom java data source support.
    public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
         return hitCount;
    } // end getQueryHitCount
    @Override
    protected void create () {
         getViewDef().setQuery(null);
         getViewDef().setSelectClause(null);
         setQuery(null);
    } // end create
    @Override
    protected void releaseUserDataForCollection (Object qc, Object rs) {
         Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
         usersListIterator = null;
         super.releaseUserDataForCollection(qc, rs);
    } // end releaseUserDataForCollection
} // end class
<af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                              label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                              columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                              searchDesc="#{bindings.UserName.hints.tooltip}"
                                              simple="true">
                          <f:validator binding="#{bindings.UserName.validator}"/>
</af:inputListOfValues>

I have found a solution to this issue. It seems that when using a programmatic view object which has a transient attribute as its primary key you need to override more methods in the ViewObjectImpl so that it knows how to locate the row related to the primary key when the view object records aren't in the cache. This is why it would work correctly sometimes but not all the time. Below are the additional methods you need to override. The logic you use in retrieveByKey would be on a view object by view object basis and would be different if you had a primary key which consisted of more than one attribute.
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
    return retrieveByKey(viewRowSetImpl, null, key, i, false);
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
    RowSetIterator usersRowSetIterator = this.createRowSet(null);
    Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
    usersRowSetIterator.closeRowSetIterator();
    return userRows;
@Override
protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
    return retrieveByKey(viewRowSetImpl, null, key, i, b);

Lost 'mask' (using alt key) in exposure and sharpening?

The black or white 'mask' by using the alt key in exposure adjustments AND the 'mask' while adjusting amount, detail and unsharp mask in sharpening is missing for me. The only difference I can think of is that LR is now on a new notebook (ASUS) and am now working with Windows 7 64-bit. Is there something I can do to re-gain those helpful masks? Any idea what happened? I'm in the middle of nowhere and don't have a lot of wireless time to research . . . Any help or suggestion will be appreciated. Joia

Well guys, everything checks out good - specs are fine and both alt keys work. The touchpad is, however, a big problem and seems to be the culprit. It switches between being hypersensitive (giving me only a quick flash of the mask) or unresponsive (the sliders do not move at all).
We plugged in a mouse and I now have control of both the masks and sliders.
Thanks again for responding - otherwise I probably would have given up for now while we're on the road - got a lot of work to do. Cheers! Joia

Due to customer being supported, must use FF 3.6.18 and today it has gone into continual hang/crash modes. Uninstall/reinstall = still crashes.

Last few weeks, FF has been intermittently hanging. Now after continual crasheds, finally uninstalled and resintalled and it either immediately crashes or hangs with most (but not all) URLs. Google/Yahoo OK, CNN comes up, then usually hangs (sometimes immediately closes browser with error msg (see below).

What posted was not the crash report, but that is the extra information about your Firefox setup that Firefox sends to the Mozilla server as part of the crash data.
If you have submitted crash reports then please post the IDs of one or more crash reports (bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
*You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location (address) bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Problems with using Option key when starting up

I have 3 internal drives using a PCI card (2 slots) that allows me to use large drives with more capacity than stock allowance on my G4 Quicksilver 867 mhz 1.5 GB RAM tower.
All drives are Seagate Baracudas ATA: 2-400GBs and 1-200GB. I bought the 400s at the same time.
My main drive has OSX 10.4.11 (#1), and it is backed up to Baracuda #2 (400GB) which is a slave to my Main drive (using SuperDuper All files for a mirror bootable copy). The 3rd drive has Leopard 10.5.1 for learning and trying Leopard.
On the second PCI slot is the smaller 200GB Baracuda.
After backing up using SuperDuper (Main to #2) as a mirror, I see #2 in the Apple > Prefs > Start Up Disk.
After the first backup I can see all 3 drives when using Option key at startup, but instead of seeing the names of each drive under the normal hard disk icons, #2 has a SCSI icon underneath the hard drive icon, it's name (Mac BU) is missing and I can't start up to it. The other #1 and #3 looked as expected. I chose #1, it launched, fine.
On second backup, #2 is still in Prefs > Start up Disk panel, but this time doesn't show up on when using the Option key at start up. I have replicated this, but erasing #2, rebacking up twice.
With only the #1 and #3 drives showing at start up with Option key and #1 selected in the Start up Disk panel, I chose #3 (Leopard) in the Option window view, and my G4 froze at the gray apple screen. I hard shut downed, powered up and the G4 defaulted to Main (10.4.11)
I selected #3 Leopard in Prefs > Start Up Disk, restarted OK.
I restarted with the Option key (only #1 and #3 show) and now my main drive didn't have it's name only the SCSI icon under the normal hard disk icon like #3 was doing. UGH!
Nervously, I chose #3 with Leopard and the G4 started up to it OK.
I then reselected my Main #1 drive in the Start Up Disk panel, restarted to #1 OK.
OK, problems summary:
1) I can't use SuperDuper to create a blessed bootable #2 drive at Option start up, but I mention this for more info about a possible problem at Option startup, more than I want comment on SuperDuper potential bug / conflict.
2) I didn't try choosing #3 in the Start Up Disk panel, as I was affraid the G4 would freeze and then I might not be able to select either of the other #1 or #3 at Option start up as something is wrong with using Option key start up, and #3 would have been selected in Start Up Panel, which I was afraid I might not be able to get to again.
2) When I start up either of #1 or #3, I get momentary black screens after the gray apple screen at Option key start up and then again after the apple progress bar. This doesn't happen when I start up directly either drive when the drives are selected using the Start Up Disk panel
When using the Option startup, I am experiencing the above problems.
Whew, I know, but does anyone have any input and fixes?
Thanks, in advance,
Steven

Hi Dave.
Well... good news / bad news
Turns out, I have an Acard 6280M and have 3 drives connected to it as mentioned (#1 & 2 are mirrored using SuperDuper with 10.5.1, #3 is a clean install off a new Apple OSX disk 10.5, then updated to 10.5.1)
I also have a Firewire external drive, that I used SuperDuper to make it a mirror of #1, using the same procedure backing up #1 to #2, to test SuperDuper.
The firmware update directions tells you to start up off a drive not on the PCI card, I used #4.
While running off #1, I selected #4 in the Start Up disk pref and it booted OK! This seems to rule out SuperDuper being the problem - of creating a mirror from #1 to #2 (both on the Acard) and then not seeing #2 in the Option key boot screen.
I applied the firmware, which directs you to first update the Acard driver to 2.06, which is included in the folder with the firmware updater.
I did this and then applied the firmware updater.
I then applied the driver upgrade to drives #1 and #2 (10.4.11) while running off #4. I did not apply the driver update to #3 (10.5.1) and restarted, using Option key.
All 4 drives appeared successfully on screen as expected with their names!
Then I selected each drive one by one:
#1 = kernal panic. Hard shut down, used Option key again
#2 = kernal panic, same as #1
#3 = froze at gray Apple screen - no spinning gear. Hard shut down.
Tthankfully, left Start Up disk pref to be #4 external and on restart, let the system boot off without going to the Option screen. #4 booted OK. Whew...
So all 3 drives on the Acard, won't boot. I was concerned it was the 2.06 driver, but since it wasn't applied to #3 Leopard drive, I'm assuming the firmware is the issue and perhaps not compatible with 10.4.11 or 10.5.1?
Two things I've not tried:
1) With #4 selected in Sys Prefs, then using Option key and selecting #4 there too to see if using the Option key selector is a problem too.
2) Selecting any of #1, #2, or #3 drives in Sys Prefs and restarting without Option key selector.
My fear is that if my last working drive #4 isn't the default drive set in Sys Prefs, if Acard isn't the problem alone and there is also a problem selecting any drive using the Option key - even #4, then if #4 isn't the default and all 3 Acard drives panic on regular boot (non-Option key) and I have to hard restart, will keep defaulting to whatever drive I set in the Sys Prefs and not be able to get back to #4.
Should I just go to my local computer store and see if they have a newer model PCI card and trash my existing one as I may have ruined it with the firmware updater?
Thoughts?

How to create new Custom XML Report without using Form Builder

Hi,
What are the steps to create new Custom XML Report without using Report Builder ?
Thanks and Regards,
Abhi

Hi,
Steps we now follow
1)Create Data Model in Reports Builder
2)Create xml
3)Insert xml in Publisher to build Fomat
4)FTp rdf
5)Create Data Definition and Template
6)Create executable and Concurrent Program
Is there any way we can build reports without use of Report Builder ? By writing PL SQL Package for Before Report and After Report etc ...
Thanks and Regards,
Abhijit Rode

Assigning of Classes to superior classes Using SXDA_Tools...Urgent

Hi All,
I have a requirement in which i have to create classes(Material classes, CL01) and subclasses for them. In the second step i will have to assign the created sub classes to their respective superior classes.
I could create classes using batch input program "RCCLBI01" and object type BUS1003 from transaction SDXA_TOOLS.
However i am not sure how to assign the created classes to their respective superior class. Does anyone know any direct input program or batch input programs to assign a class to its superior class ??

See [http://forums.sun.com/thread.jspa?threadID=5333060&tstart=0]. In general, if you use third-party libraries in your code, you should include these libraries in Javadoc's classpath option when generating documentation.

Patch 11072246 Addresses non-optimal index use

Hi,
on 11.2.0.3.0 on Win 2008
the patch 11072246 Addresses non-optimal index use when an index column is in descending order.
How can we know if we should apply this patch or not ?
Until now no user has found a problem like this. Does it mean that we have not non-optimal index use at all ?
thanks and regards.

thank you. yes , 13965211 is superseded.
But in 16774393 ( Windows Patch 20) , non-optimal index use when an index column is in descending order is not addressed.
Regards.

First time using "Nokia N8 Ovi Map"

hello,
im first time using my n8 ovi map, and i wonder why it took hours for checking for my position,
after 2-3 hours of waiting, it still searching for my position. instead of keep waiting, i switch to walking mode, and set a destination, now it shows "waiting for GPS". i have been waiting for more than 1 hour, sadly it still showing "waiting for GPS". Anyone experiences this problem before? please provide me some solutions. thanks.

@NokiN8Silver
Welcome to the forum!
You might try as a temporary measure going to Menu > Settings > Application settings > Positioning > Positioning methods - only enable Integrated GPS then go outside away from tall buildings and it should lock on to satellites within 20 -30 minutes; once position established subsequent satellite lock on will be much more rapid.
Happy to have helped forum with a Support Ratio = 42.5

How to import custom java jar/class into oracle to be used in java proc ?

Hi
I would like to know how to import custom java jar/class files into oracle to be used in java stored procedure.
I am developing a oracle pl/sql procedure to call java program. The java program will be created as procedure and will be published.
But, my question is that I do have a other external jar/class file that need to be imported into this java program.
example
raise_sal.java
import java.util.*;
import oracle.sql.*;
<<reference other java programs >>
import cmpmsgsvc.xxxx.* ;
import cmpmsgsvc.yyyy.* ;
import cmpmsgsvc.zzzz.* ;
how do I import the cmpmsgsvc jar/class file into oracle so that I don't have any
compilation errros on raise_sal.java program ??
what are the steps to import/compile and validate to do this?
thanks for your help in advance.
Thanks
rrb.

Kuassi
Problem is that, I have 6 jar files that are needed to be included in the main java program. And, there are more than 50+ classes, propertiers in those 6 jar files.
It might be not good idea to have all those 50+ classes in the production database.
Is there anyway that I keep all those 6 jar files in unix box (our's is oracle erp installation with oracle being installed on unix box) and just refer them in the main java program. I mean database will be loaded with main java program and it should able to refer other 6 jar files from unix.
if we create a directory and keep all jar files in there and include that directory in classpath variable, does this works? or what is other method?
Please let me know.
Thanks

HOWTO: Create a Boot Configuration That Has No Driver Signature Checks. Disable Driver Integrity Checks and Install a Custom Non-Signed Driver

Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...

Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support

Can I create a custom XMP panel but using the exact same fields from standard XMP panels?

Hi,
I am new to XMP and not very technical, so please excuse me if this sounds like a stupid question!
I have managed to create my own custom panels for Photoshop using the Generic Panel method with my own custom fields and they work fine. However what I need to do now is create a custom panel that uses the exact same fields from some of the standard panels. The reason being is that I have 4 fields that need to be integrated into another non-adobe system (Extensis Portfolio) that recognizes standard XMP fields, but at present these 4 fields are spread across different standard panels and it would be much easier for the user in Photoshop if they were all together on one panel.
An example field is the "Additional Model Info" field that currently resides on the standard IPTC Extension panel. If I fill in a value in this field on a JPEG then open the the image in Extensis Portfolio, then the field is also filled in in a field called IPTC - Model Info, displaying a key of Iptc4xmpExt:AddlModelInfo.
Is there a way I can take this standard field and use it on a custom panel, so that it can still be filled in in Photoshop and the value viewed in Extensis Portfolio? Sure I can create a custom panel and create a field called "Additional Model Info" but I can't figure out how to connect it to the corresponding field in Portfolio. I tried changing the xmp_property name="Iptc4xmpExt:AddlModelInfo" but this just broke the panel.
Is what I am trying to do possible and if so how and can it be done using the Generic Panel method?
Many thanks!

I am trying to do the same thing but with only the IPTC Keywords field. Searching everywhere but no luck.
Thanks!

Web Service Proxy error: "No operation found using soap keys"

I'm trying to use the new tools, and having a little trouble. Not many results when searching for this error message.
I have developed and deployed a new Java web service proxy using the outside-in approach according to the [help docs|http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/7f2fef88190ad3e10000000a11466f/frameset.htm] (PI 7.1 SP07, NWDS 7.1 CE SP09 PAT0000). Started with a Service interface in ESR, then generated a java bean skeleton into a new EJB project in NWDS, then wrote business logic and deployed.
When I test the web service (with 3 different SOAP test clients) I get the same error, below:
     <faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException:
No operation found using soap keys [], [spmat_jdbc_receiver_proxy]. InterfaceMapping Object class:
com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_ProxyBinding, BindingType=Soap, PortTypeQName=
{urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_Proxy, JAXWSInterface=true, InterfaceMappingID=-
27e4d529:127632b5c52:-7ebb}.</faultstring>
My service endpoint interface looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@javax.jws.WebService(name = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100")
@javax.jws.soap.SOAPBinding(parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.BARE, style = javax.jws.soap.SOAPBinding.Style.DOCUMENT, use = javax.jws.soap.SOAPBinding.Use.LITERAL)
public interface SIISyncSPMATJDBCReceiverProxy {
@javax.jws.WebMethod(operationName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", action = "http://sap.com/xi/WebService/soap1.1")
@javax.jws.WebResult(name = "spmat_jdbc_receiver_proxy_response", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy_response")
public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(@javax.jws.WebParam(name = "spmat_jdbc_receiver_proxy", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy") generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy);

(continued from above post)
And my implementation bean looks like this (unimportant lines removed):
package nexeninc.pi.ll.spmat._100;
@SessionHandlingDT(enableSession = false)
@AuthenticationDT(authenticationLevel = AuthenticationEnumsAuthenticationLevel.BASIC)
@TransportGuaranteeDT(level = TransportGuaranteeEnumsLevel.NONE)
@WebService(serviceName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Service", portName
= "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", endpointInterface
= "nexeninc.pi.ll.spmat._100.SIISyncSPMATJDBCReceiverProxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100", wsdlLocation
= "META-
INF/wsdl/nexeninc/pi/ll/spmat/_100/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy.wsdl")
@Stateless
public class SIISyncSPMATJDBCReceiverProxyImplBean {
     @RelMessagingNW05DTOperation(enableWSRM = false)
     public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(
               generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy) {
          System.out.println("Starting siISyncSPMATJDBCReceiverProxy.");
When we first created the new endpoint in NWA, we tried asigning a new name for both "Service Endpoint Name" and "In New Service", and we received this error.
We then deleted the endpoint and created another new one, setting "Service Endpoint Name" to match the portName in the implementation bean: "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", but that didn't work either. The only option we enabled in the endpoint was HTTP authentication: User ID/Password.
My ejb-j2ee-engine.xml and application-j2ee-engine.xml are both empty (but they exist).
I am new to EJBs and JAX-WS so hopefully it's something simple. All help appreciated!
Apologies for the long (and wide) post.
- Rob

Custom component/tag class: ---which setters/getters do what?

Hi
I'm trying to create a custom component, but, there is a major concept that I do not understand...
---What are the setters/getters in the "component" class used for?...
---What are the setters/getters in the "tag" class used for?
Another way of asking is...
---Which setters/getters are used simply to keep track of attribute name/id/key?
---Which setters and getters refer to the actual objects that the attribute names point to?
The reason for my confusion is that nearly all "custom component" examples I've seen thus far, utilize attributes that point to "String" objects... (i.e., as opposed to ArrayList, HashMap, etc)...
This makes it difficult for me to distinguish whether the String values in the getters/setters are referring to the String name/"id" of the attribute...or, the String "value" of the attribute...
I have not been able to verify how I should code the getter/setters (and type casts) for other kinds of objects like ArrayLists, HashMaps, etc
For example, a typical logic mechanism Ive seen in the custom "tag" examples is as follows...
in a "tag" class...
        if( tabledata != null )
            if (isValueReference (tabledata))
                FacesContext context = FacesContext.getCurrentInstance ();
                Application app = context.getApplication ();
                ValueBinding vb = app.createValueBinding (tabledata);
                component.setValueBinding ("tabledata", vb);
            else
                component.getAttributes ().put ("tabledata", tabledata);
in the "component" class...
    public void setTabledata (List tabledata)
        this.tabledata = tabledata;
    public List getTabledata ()
        if(null != tabledata)
            return tabledata;
        ValueBinding _vb = getValueBinding ("tabledata");
        if(_vb != null)
            return (List)_vb.getValue (getFacesContext ());
        else
            return null;
    }...considering the above code,
---when/where should the "tabledata" variable be referring the "name/id" of the attribute?...
---when/where should the "tabledata" variable be referring to the "value" of the attribute?...
...as, I need to change the type casting to adjust to what it should be...
***NOTE: This is one error that I'm getting, and I believe it is because I do not understand how getter/setter is used in "component" and "tag" classe, i.e., :
"org.apache.jasper.JasperException: jsp.error.beans.property.conversion
     org.apache.jasper.runtime.JspRuntimeLibrary.getValueFromPropertyEditorManager(JspRuntimeLibrary.java:885)"...
Thanks for any help on this!
sd

The "tabledata" variable always refers the local value of the attribute.
When using a value binding to some backing bean,
the local value is null and the model value is owned by the bean.
You don't need any casting in the tag class nor the component class.
The setters/getters in the component class specify the type of the attributes.
Conversion from/to String to/from the type is done automatically if possible.
When the automatic conversion is impossible, you should specify f:converter
for the attribute.

Custom non-PersistenceCapable classes used as keys in Maps and/or SortedMaps?

Similar Messages

Maybe you are looking for