Custom Resource Provisioning Error

Hi All,
I created a custom Resource in OIM 9102. The provisioning process is straightforward it has 2 tasks System validation and create user task. The create user task is only returning a complete message and then state of the resource is set provisioned. Process form has 5 fields all are pre populated from usr form.
When provisioning the resource the system validation task is complete but the create user task is always stuck in pending state. Could some one please suggest me what I am missing here.
Karthik

Check the preceding tasks on the create user task, is there anything there? On the resource object, the depends on tab, is there any other resource defined here? Check your response codes, are you returning a response with a P as the status?
-Kevin

Similar Messages

Ordering Resource Provisioning Issues

Hello Kind IDM Folks,
We are having a small issue with some of the automatic provisioning IDM handles through roles. We have a role that will provision two resources. One resource is our definitive LDAP resource, and the other resource calls to our LDAP resource to get user attributes from. What we are starting to notice, is that the resource that requires LDAP is being called to provision first, then the LDAP provision is happening. So the first resource provisioning errors out. Then the account is loaded into LDAP fine. The next time the account is updated / saved, a provisioning event is fired off and it works fine.
Is there any way to control the order that the resources are provisioned to when they are assigned by a role?
Thanks!
Jim

Yes! Order the resources in the order desired and then check the "Update resources in order" checkbox (below the Resources multi-select).
That setting manifests itself as
<Role ... ordered='true' ...>
[etc etc etc]
</Role>Hope this helps.
Jason

Error while performing OSB Resource Provisioning in OEM12c

Hi ,
I tried the following, but faced the below errors mentioned.
1.Log on to Oracle Enterprise Manager Cloud Control 12c Workspace using "sysman" userid
2. Navigate to Enterprise-> Provisioning and Patching-> Middleware Provisioning.
3. From the List of Deployment Procedure Names section, Select the Oracle Service Bus Resource Provisioning procedure from the list and click Launch.
4. In ‘Select Source’ page, Select ‘Oracle Service Bus Domain’ radio button
5. Click Browse icon and Select the specific Domain and also specify the BEA Home Directory and Click Next.
6. In ‘Select Projects’ page, in the Resource Summary section, Select the projects to export and deploy to the target OSB domain.
7. In ‘Select Target’ page, Select ‘Domain’ and’ BEA Home Directory’ in the ‘Target’ section
8. In ‘Set Credentials’ page, specify the login credentials of the source and target domains, hosts and Click Next
9. In ‘Schedule’ page, Specify a Deployment Instance name and Click Next.
10. In Review page, review the details you have provided for the Deployment Procedure
11. Click Submit to run the Deployment Procedure according to the schedule set.
12. In ‘Procedure Activity’ page, Click Status and view the details of the execution of each step.
The procedure activity is created successfully, but its completed with the following error in Transfer Jar File
Step: Create archive file from contents of directory (Failed)
Created /tmp/job_ft_D534213D48EC4E46E04333B6360AA560
Executing command /opt/em/core/12.1.0.2.0/bin/zip -rv /tmp/job_ft_D534213D48EC4E46E04333B6360AA560/src_archive_D534213D48EC4E46E04333B6360AA560.zip .
zip error: Nothing to do! (try: zip -rv /tmp/job_ft_D534213D48EC4E46E04333B6360AA560/src_archive_D534213D48EC4E46E04333B6360AA560.zip . -i .)
Process returned : 12. Illegal seek
Step: Create or prepare destination directory for commencing file transfer (Succeeded)
Step: Transfer archive file to destination (Error)
File does not exist or not accessible.sink operation skipped due to source operation failure
Kindly help here
Thanks

Hi,
I have resolved the issue with the help of cluster admin
Regards
Mitesh

Query: Not Update the resource provisioned AD

Someone can help me with this case, I configured the connector for the supply of Active Directory, up here all goes well, when trying to enter the domain with the user supplied I do not take into consideration the assigned password and other details to update any data, this is the password I fearlessness the following error in the log.
ERROR [XL_INTG.ACTIVEDIRECTORY] Problem modifying object: javax.naming.OperationNotSupportedException: [LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FBC, problem 5003 (WILL_NOT_PERFORM), data 0
]; Remaining name 'cn = JLK SENSI'
Thank
Message was edited by:
JLK

Friend: Kunwar.nitesh
No custom attribute, the only set default,
The second comment mentioned that could be another BUG, I infer that that version of the connector that use the 9.04 is not as good
Friend: Martin_Sendren
To you mean with this message that gives me the connector: WILL_NOT_PERFORM
The fact that I was the administrator's default Identity Manager (xelsysadm).
As for the password of the resource provision in the active directory will disable the complexity of passwords in the political choices of security.
What do I recommend to solve this problem?
Thank

Custom Resource Renderer not coming on Implementing Flexible UI Components

HI,
I am using the Sneak Preview NW2004s SP9 with TREX .
I have to modify the search result list as returned by the TREX using the default search, basically have to include a custom Link based on the resource name.
I am trying to run the examples from the Knowledge Management and Collaboration Developer's Guide - "How to Implement Flexible UI Components".
I deployed the par file for the sample application "Using Flexible UI Ready-Mades"
and followed the steps as outlined below:
System Administration>System Configuration>Knowledge Management -->Content Management
1) Under
User Interface->Mapping>Resource Renderer
Created a new mapping for the java class com.sap.km.ui.renderer.SimpleResourceRenderer
2) Then under
User Interface->Settings>Resource Renderer Settings
Created a duplicate of SearchResourceRenderer
and in the copy changed the Resource Renderer to the custom one(as the one mapped in previous step).
In the Search Result layout Set, i changed the Resource Renderer Name to the custom one.
Now i restarted the server.(i tried restarting after almost all the steps )
But my resource renderer is not coming after i execute the TREX Search.The list returned seems to use the default Resource Renderer.
I even tried by making an advanced copy of the Search Layout Set, changed the Resource Renderer name, updated the OTH file(search.oth), Switched on the degugging for the WdfProxy and reloaded the OTH.
Now the new layout Set is being used but still i cannot see the result as per the custom resource renderer.
Morover, if i try to print some message from the resource renderer code(Component render method), it is not printed in the default Trace file.
Please help me in identifying and resolving the problem.
Thanks,
Siddhartha

Hi Detlev,
Sorry for the delay.
We don't want to exlude the folders, we would like keep it, the problem is, instead of appearing the folder name, is displayed the error message and below the actions (details, delete, ).
At first, we thought that could have been an error in the configuration of LayoutSet, but then, we tried on other two environments, with the default LayoutSet configuration and we still get, on the three environments, the same error message.
Any idea?
Thanks and Regards,
John

Changing Owner & Business Group of ASD Custom Resource

So this is a bit of an expansion of this discussion: https://communities.vmware.com/thread/500669?start=0&tstart=0
You will see that pizzle85 managed to solve his challenge of BG object ownership by using an ASD Service Catalog Request located in each Business Group's Entitlements so a member of the business group can just run the Provision required to bring the BG item under management in the business group. This is quite an effective method to solve the need. He then has a Resource Action that allows for re-"Provision" which changes owner within the business group: a necessary task because managers tend to move around a lot so they can look busy. (just kidding, I love managers--who have a sense of humor) So to change owner... just perform a "provision" again.
Apparently this is one of the best kept secrets in vRA because it has been hard to figure out, and nobody is writing about it. (I can only assume that there is some SE out there who has worked with the developers to get this capability going and it hasn't been shared widely.)
Note: I think Business Groups as a Service is something I need to plan for (vs centrally managed Business Groups) even though their future implementation might vary, so my examples here are related to that effort because I am too lazy to demonstrate a generic example. BUT... the idea is... ownership of ASD Inventory Objects (representing ANY Custom Resource) can be modified using this method. Ownership includes both the owner represented by "ME" in the Items list... and the Business Group (subtenant Reference & Label) where the item resides in inventory.
In 6.2.x, I have not found any method in the vRO plugin for vRA to be able to change ownership and business group of an ASD Custom Resource Inventory Item, but it can be accomplished via a combination of (1) ASD Service Catalog or Resource Action "Provision" capabilities and (2) REST calls through the vRA plugin service channels. (the latter uses the plugin service account authorizations/entitlements)
Consider this image...
This could represent a central management point for many business groups: where I can assign a set of resource actions allowing for automation of various business group needs, an anchor point for actions. Those in the sktest business group Support User or Manager Role would be able to see all the business groups globally if they were all provisioned in sktest. (a bucket to manage from)
This also could represent a starting point where business groups are created as real objects, returned as custom resources, and "provisioned" as inventory object items. But once there...maybe you want to move it?
Let's say we later decided, seantesting doesn't belong in sktest because we wanted to change from the "we manage it for you" model to the "manage it yourself" model. How do you move it?
Like this...
And it moves now owned by the vRA plugin service account... (which an entitled user could run Take Ownership and own it in that business group)
The service account obviously needs to be part of the destination business group and as it ends up, has to have an entitlement to any "provision" action in the business group even though the object doesn't exist there.
This is a tricky hack and this is how it works...
1. vRO workflow calls the Take Ownership Action in vRA via REST (front door process). As noted before, this has a provision attribute to the action which we know changes the owner. So we would expect that the owner would change to the user that is making the request: which is the service account. The service account becomes the owner, but this wouldn't change the Business Group.
2. So we change subtentantRef and subtenantLabel in the REST call to the business group we want to target, even though the object isn't in inventory in that business group. And Voila! The business group item representation re-provisions as a new owner in a new business group. Effectively changing the owner and moving the object from one BG to another BG using the management-method vs the self-service-method (the latter as pizzle85 did).
Again... maybe you care less about Business Groups. Maybe you would prefer self-service. It is the capability of moving a custom resource inventory representation that matters.
Here is an example of the REST call to run the "Take Ownership" action. I have a script before this that pulls in all the variables for the "Resource" I am targeting (from the BusinessGroup object ID), the action I am running (Take Ownership ID), the business group Ref and Label) and some of the properties I need for the Take Ownership action like bgName... but those are actually not necessary. (all of the "entries" are what is required per the Take Ownership request... if that request didn't require any inputs, there would be no entries... it is the top change of subtenant that allows for the BG move)
System.log("resourceRef: " + resourceRef);
System.log("resourceActionRef: " + resourceActionRef);
System.log("targetRef: " + targetRef);
System.log("targetLabel: " + targetLabel);
System.log("bgName: " + bgName);
var payload ={
"@type":"ResourceActionRequest",
"resourceRef":{"id":resourceRef},
"resourceActionRef":{"id":resourceActionRef},
"organization":{"tenantRef":"vsphere.local","tenantLabel":"vsphere.local","subtenantRef":targetRef,"subtenantLabel":targetLabel},
"state":"SUBMITTED",
"requestNumber":0,
"requestData":
{"entries":[
{"key": "provider-rYouSure","value":{"type":"boolean","value":"true"}},
{"key": "provider-bgName","value": {"type": "string","value":bgName}}]}
payload = System.getModule("org.dojotoolkit.dojo.json").serialize(payload);
System.log(payload);
Server.log(payload);
var catalogRest = cafeHost.createRestClient(vCACCAFEServicesEnum.CATALOG_SERVICE);
var response = catalogRest.post("consumer/requests",payload);
Best of luck in your Automation Efforts!
Sean

Turns out... it is likely not required as part of the request data.

How to install custom Resource Adapter

Hi I have writen the java class for the Custome Resource adapter and I loaded the .class file into web-inf classes folder.I followed the installation steps given in the deployement document.In that I am not understanding one step i.e "Install .class file and help file into IDM" How can we do this and How to get the particular resource under Managed Resources tabe of Configure tab./its very urgent for me any kind of help is appriciable.

Ok, since it is urgent, do it the way Sun/Waveset inserts the adapters.
1.) Alter your java code to have
package com.waveset.adapter;
As your package line.
2.) Compile the adapter to a class file.
3.) Grab the idm.jar file from $WSHOME/WEB-INF/lib and copy it to e.g /tmp
4.) unjar it. jar -vxf idm.jar
5.) copy the your adapter class file to /tmp/com/waveset/adapter
6.) jar the archive. jar -cvf idm.jar /tmp/com
7.) Make a backup of the original idm.jar, and copy the new to the old position replacing the old jar-file. Bounce your app-server.
8.) Log in as configurator or an administrator with equal capabilities. And add the custom adapter using the previous procedure... although, use the adaper class path
com.waveset.adapter.YourCustomAdapter
9.) Go to debug pages and put tracing on the same class file, and tail -f the app-server std out.
10.) try to configure the adapter. Note any eventual error messages. Post error messages on the forum along with the std out log.
If your adapter code works, it should work... if not your problems are elsewhere.
Please not that this set up is not recommended for production environment and if you apply service packs etc this fix will break!

CUSTOM VIP CREATION ERROR

Hi all, i have tried to define a new VIP on my ORACLE 11gR2 RAC cluster, in order to manage third-party component by using ORACLE Clusterware.
I have used the info written on the ORACLE manual "Oracle Clusterware Administration and Deployment Guide E10717-04" at page 5-15.
I have executed the command "/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root", as the manual says, from root user.
My environment is AIX 6.1.
Unfortunately, i get an error (reported following) but i am not able to solve it.
Please, may you help me?
Thanks
Marco
CUSTOM VIP CREATION ERROR
[nodo01][]>/u01/app/grid/bin/appvipcfg create -network=1 -ip=xx.xxx.xxx.140 -vipname=appsVIP -user=root
Production Copyright 2007, 2008, Oracle.All rights reserved
2010-05-31 18:39:54: Creating Resource Type
2010-05-31 18:39:54: Executing cmd: /u01/app/grid/bin/crsctl add type app.appvip.type -basetype cluster_resource -file
/u01/app/grid/crs/template/appvip.type
2010-05-31 18:39:55: Create the Resource
2010-05-31 18:39:55: Executing cmd: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
CRS-0247: User name or group name is invalid
CRS-4000: Command Add failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/grid/bin/crsctl add resource appsVIP -type app.appvip.type -attr
USR_ORA_VIP=xx.xxx.xxx.,START_DEPENDENCIES=hard(ora.net1.network)
pullup(ora.net1.network),STOP_DEPENDENCIES=hard(ora.net1.network),ACL='owner:root:rwx,pgrp:root:r-x,other::r--,user:root:r-x'
2010-05-31 18:39:56: ###### Begin Error Stack Trace ######
2010-05-31 18:39:56: Package File Line Calling
2010-05-31 18:39:56: --------------- -------------------- ---- ----------
2010-05-31 18:39:56: 1: crsconfig_lib crsconfig_lib.pm 7474 crsconfig_lib::error
2010-05-31 18:39:56: 2: main appvipcfg.pl 241 crsconfig_lib::system_cmd
2010-05-31 18:39:56: 3: main appvipcfg.pl 93 main::config
2010-05-31 18:39:56: 4: main appvipcfg.pl 74 main::process_arguments
2010-05-31 18:39:56: ####### End Error Stack Trace #####
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hi,
On Solaris 10 and Oracle Grid Infrastructure 11.2.0.2 did the following. Posting this as it might be useful to someone else. Installed Grid Infrastructure as oracle.
As root:
# ${GRID_HOME}/bin/appvipcfg create -network=1 -ip=<vip_address> -vipname=<vip_name> -user=root
In the above command, if you are wondering what -network=1 is, got useful info from "Oracle GoldenGate high availability using Oracle Clusterware" white paper at http://www.oracle.com/technetwork/middleware/goldengate/overview/ha-goldengate-whitepaper-128197.pdf
As per the white paper, if you do
crsctl status resource -p | egrep -i 'network|subnet' | egrep -i 'name|subnet'
output will look something like this:
NAME=ora.net1.network
USR_ORA_SUBNET=10.2.0.0
net1 in NAME indicates this is network 1, and second line indicates the subnet on which the vip will be created.
# ${GRID_HOME}/bin/crsctl setperm resource <vip_name> -u user:oracle:r-x
I did the following as oracle:
Oracle_Prompt> ${GRID_HOME}/bin/crsctl start resource <vip_name>
If you want to relocate this vip to other node in the cluster:
Oracle_Prompt> ${GRID_HOME}/bin/crsctl relocate resource <vip_name> -s <source_node> -n <target_node>
Hope this helps.
Thanks,
Moorthy.
帖子经 Moorthy Rekapalli编辑过

Custom Resources - FIM MA Export failure

Hi,
I have some custom resources imported into MV and now, when running FIM-MA Export, those resources are not created.
In the sync service console (operations tab) I can see in the "export errors", this: "...No policy grants the Requestor permission to complete all changes..."
I opened the request in the portal and saw that it has no MPRs in "Applied Policy" Tab.
Although the requests created in the portal UI are succeeded (they have an
admin account and an applied MPR).
What should I do to have the "Built-In syncronization account" be able to create those custom resources?
Please note I'm a developer, not the administrator who created the resources, so walkthrough docs/articles are welcome.
Many thanks,
DD

You should create two things:
1. Set (criteria based) of all resources of your new type.
2. Management Policy Rule in FIM Portal that would grant "Built-In synchronization account" rights to manage all attributes of members of Set created in point 1.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Problem loading JNDI custom resources after migration from WS6.1 to WS 7.0

We have a web application that uses a handful of custom resources that works fine on Sun Web Server 6.1, but after we migrate to 7.0, it fails. The error is that it cannot find the Factory class that we use to create the custom resources. If we put a .jar file in the server's classpath so it can find the Factory class, we get a perplexing error that the custom resources don't match in the config files, when they're identical.
Here are the details:
The error we get when we just do the migration without any changes is:
*WEB7021: Class [edu.umn.cidrap.admin.repository.RepositoryFactory] not found*
After we add the .jar to the server classpath, that goes away, but we get:
*WEB7018: res-type mismatch for resource [bean/UrlRepository]. res-type in server.xml [<package>.UrlRepository] does not match res-type in web.xml [<package>.UrlRepository]*
The <package> matches identically.
Any help with this would be appreciated.
Dave

Yes, it's odd.
I ran across a similar problem upgrading an application in Tomcat, from version 5 to 6. The gist of the problem there seemed to be that the class loaded into JNDI was loaded by the server's classloader while the class using it was loaded by a different classloader (one for the web app) and that, in Java, the same class loaded by different class loaders is different. Or something like that.
The solution that worked there was to make sure that Tomcat could not find the class, which I think caused it to be loaded by the web app class loader. But I'm out of my league on that and my memory is not what it should be.
I don't know if that's the case here, but the error message -- two identical classes generating a message that they're not the same -- brings up that bad memory.
Nonetheless, I'm still stumped.
Dave

Testing Custom Resource Adapters

Hi All,
I am currently in the process of developing and (unit) testing a custom resource adapter.
I noticed that there is a SkeletonResourceTests.java file although it has a dependency on the com.waveset.junit package which appears not to exist... Doesn't anybody have this package or have any information about it? Also, what other suitable testing practices are there for testing custom resource adapter?
Any assistance would be greatly appreciated.
Thank in advance.

Hi,
Change the SkeletonResourceTest program according to the needs of your custom adapter.The junit package actualy does not exist. There is a package junit in idm.jar, but it does not contain all the required class to complie the resource test class.
I compiled it using junit package after downloading it from junit site.
I am having problem in testing the customadapter.
I am getting the following error:I tested with the following command,
C:\>java -D waveset.home=c:\Tomcat 4.1\webapps\idm com.waveset.adapter.test.Custom
SResourceTests
=======================================
I got this error:
Exception in thread "main" java.lang.NoClassDefFoundError: waveset/home=c:\Tomcat
Can anyhbody help.
regards
Manilal

Recieveing "OnUCAppointmentGetVisible" error in Outlook 2013 (64 bit) - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"

Hi All,
I originally posted this in the MS Support forums (http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/recieveing-onucappointmentgetvisible-error-in/1a40eca2-8cd1-40f1-a92f-cb08f0af6b72), but was directed over here.
I have recently upgraded an installation of Office 2010 to 2013 (both 64 bit) but am now receiving an error which says:
Window Title - "Custom UI Runtime Error in Lync Meeting Add-in for Microsoft Office 2013"
An error occured while calling the callback: "OnUCAppointmentGetVisible"
This seem to happen when I initially open a calender entry, and when I close the entry (most only the first time I close the entry).
I did have some developer tools installed for Office 2010 and VS 2010 which played around with Excel,2013 but I have now uninstalled these.
In addition, BCM 2010 was installed (but for the time being has been uninstalled), but I don't think that is the culprit.
The issue is being caused be an Outlook add-in. I have three COM add-in enabled, but the one causing the issue in the "Lync Meeting Add-in for Microsoft Office 2013".
We are currently trialling Lync in a demo installation which is in a different domain to any of the Exchange accounts, but should this cause a problem? For the time being I have disable this add-in.
Regards,
Chris
Chris

Hi,
Sorry for my misunderstanding. If the issue is determined to be caused by Lync Meeting Add-in, please remove this add-in from Outlook, then go to Control Panel to repair Office 2013 program. After repairing,
this add-in would be automatically reinstalled. Please check whether the issue persists. About how to repair Office programs, please refer to:
http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
If the Lync Meeting Add-in is not automatically reinstalled, please try to manually add this add-in by the following steps:
1. Starting Outlook 2013 as an Administrator (right click, run as Admin).
2. Click File > Options > Add-ins, Manage Com Add-Ins Go... > Add..., C:\Program Files (x86)\Microsoft Office\Office15\UCAddin.dll, OK.
3. Close Outlook and start it as a normal user.
Regards,
Winnie Liang
TechNet Community Support

How to use Custom resource in MSA 5.0

Hi All,
I need to create a Custom resource on a tileset, where i need to create a hyperlink with an image. On clicking this image(hyperlink) , the control should transfer to the other tileset.
Can anybody explain or share a code for the same?
Thanks in Advance.
Regards,
Soumya

Hi Sowmya
Custom Resources are not as such modelling objects in Mobile applications. They are the files that can be associated with interaction components and button controls, to enhance the functionality of the application.
More over, tilesets can not have custom resources. Only tile controls like buttons can be associated to the custom resources.
For your requirement, You can have one label which can actually hyperlink configured so that at runtime clicking on the label hyper link will take you the tileset which you have set as hyperlink target. For this, you can see some of the exsiting tiles which has hyperlinks (tactdeta2.vb)
Best regards
Shankar

Customer Master replication error from R/3 to CRM

Experts,
I am trying to replicate Customer Master from R/3 to CRM.
All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
This data corresponds to Shipping data in Customer Master.
Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
Thanks in advance,
JD

Pls see Customer Master replication error
Closed.

CUP Provisions user to SAP successfully but gives "Auto-Provisioning" error

Hi All,
I'm getting an "auto-provisioning" error in CUP when a "Change Account" workflow is approved. The strange thing is, CUP does successfully provision the change to the SAP backend. Yet, the "New Account" provisions successfully without the error.
Here is an example of the audit trail log from Change Account:
Request submitted for approval by Dylan Hack(HACKDY) on 06/28/2010 17:14
Approved By Dylan Hack(HACKDY) Path AE_AUTO_APPROV_ERROR and Stage AE_AUTOPROV_ERR on 06/28/2010 17:14
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
Auto provisioned for request on 06/28/2010 17:14
   User Provisioning failed for System(s) : DEV. Error Message :
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
Request submitted for reroute by system on 06/28/2010 17:14 due to auto provisioning failure
   Rerouted in the Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR to Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR
Note: the role names were replaced with "xxxxxxx."
The system log gives an error, but it is very vague:
2010-06-28 17:14:34,682 [SAPEngine_Application_Thread[impl:3]_33] ERROR com.virsa.ae.service.ServiceException
com.virsa.ae.service.ServiceException
     at com.virsa.ae.service.sap.SAPProvisionDAO.intializeWithChangeUserInputParameters(SAPProvisionDAO.java:762)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3457)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3419)
Any ideas or suggestions?
Current software level AC5.3 SP12.
-Dylan

Hello Varun,
Thanks for the thought on this. We don't use User Defaults for Change Account, but do for New Account. You question prompted me to do more testing with very interesting results.
Results
New Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
New Account without User Defaults configured:
User provisioned successfully, no Auto-Provision error.
Change Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
Change Account without User Defaults configured:
User provisioned successfully, Auto-Provision ERROR, Defaults NOT provisioned.
In both New and Change Account, the configured User Defaults are NOT provisioned even though the user is provisioned. AC5.3 is on SP12, the RTA is VIRSANH SP12 and VIRSAHR SP10.
For the Change Account, the user is always provisioned regardless of User Defaults; however, when no User Default is configured, the Auto-Provisioning error occurs. The User Defaults NOT provisioning is a real problem, the CUP error message, I can work around for now.
What about on your side? Am I the only guy using SP12 here?

Custom Resource Provisioning Error

Similar Messages

Maybe you are looking for