Custom text component with different start and end points for each line

I'm trying to create a custom component extending textArea in which each individual line in the textArea would have different start and end points.  For example, the start/end points for line 1 might be 20 pixels in the front and 35 pixels at the end but start/end points for line 2 might be 25 pixels in front and 20 pixels at the end, etc.  These boundary values would be passed in.  The width of the entire textArea component would be a fixed size.  The result would be something like this:
     Jack and Jill
          ran up the hill
  to fetch a pail of water
depending on the boundary values of each individual line of course.  The custom component would take a string and render it in the text component with the appropriate individual line start and end points.  I'm trying to do this by adding the text component to the display with the passed in string and then adding in spaces in the beginning of each line and adding a "/n" at the end of the line wherever appropriate based on the start and end values for that line.
Just wondering if I'm on the right track and if anyone has any advice on this.

> Applying the marker places the same icon on all lines of the graph and I need a different one for each
What do you have selected when you assign the marker? It
shouldn't apply to all the markers on the whole graph unless you have all the existing markers selected when you apply the new one.
Assigning marker designs is exactly analogous to assigning bar graph designs.
If you have a single marker selected when you assign the new design, it will apply to only that graph data point.
If you use the group select tool (or option-click with the direct select tool) to reclick on an already-selected marker until all the markers for the same line are selected, and then assign a design, the new design will apply only to the selected line. (You can extend the graph by adding more rows, and the new data points will inherit the marker for the line they are on.)
The thread linked to below demonstrates in more detail how the marker designs are scaled:
http://www.adobeforums.com/cgi-bin/webx/.3bc10970/0

Similar Messages

  • Get Start and End times for each step in a job

    Can someone tell me how to get the start and end times for each step in a background job?  Table TBTCP only stores the time that the step was saved in a background job.  Table TBTCO stores the times for the entire job and not each individual step.
    Thanks.
    Ryan

    Hi,
    Please check this tables and FM perhaps they may help
    TBTCJSTEP  - Background Job Step Overview
    TBTCR          - Batch scheduler execution time
    TBTCS          - Background Processing: Time Schedule Table
    GET_JOB_RUNTIME_INFO
    Regards,
    Ferry Lianto

  • Custom Control Help: Draw a line and output start and end points

    I'm looking to find or make a custom control (or simple subVI) that will appear as a 100x100 unit grid and allow me to draw a line from one point to another on that grid. It will then output the (x,y) of the starting and end point of that line on the grid.  Any help or ideas?
    Thanks,
    Steve
    LabVIEW 2009 SP1
    Solved!
    Go to Solution.

    What you basically want is a loop with an event structure where you process Mouse Down, Move and Up events for your controls. There are any number of ways of implementing something like this, but this one will probably be the simplest:
    Use a multicolumn listbox or a table for your grid. Hide the scrollbars and headers.
    You can use the ActiveCell property with -2,-2 to select all cells. You can then use the cell size property to set the exact size of the cell.
    Next, you put a picture control on top of the table and color its background transparent so that the table shows through. You use property node to make sure the two are aligned to exactly the same spot and size.
    You use the mouse events on the picture control to detect the clicks and moves.
    You use the table's Point to Row Column method to translate the event's position data to a cell.
    You use the picture control VIs to draw the line on the picture based on that data.
    You can even color the selected cells in the table using the table properties.
    If you want to simplify things somewhat, you can also use the timeout event instead of the Mouse Move event to draw the line, but then you'll need to keep the timeout value in a shift register and reset it to -1 (no timeout) when the Mouse Up event happens.
    I would also suggest processing Mouse Enter and Leave events to change the cursor and cancel if the user leaves in the middle of dragging.
    Try to take over the world!

  • Start and End dates for users in Enterprise portal

    Hi Expert,
    I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

    Hello
    Please check below URL for User Import Format:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
    Regards,
    Tapan Goyal

  • Drawing small, short curves in Photoshop draws straight line between start and end points

    I recently installed Windows 8 Professional, Photoshop and the latest Wacom Bamboo tablet drivers and have been experiencing this issue. I've turned off windows flicks and ink. This only happens in Photoshop with the brush tool and I can't seem to find a setting that this corresponds to.
    Basically, when I draw small, short curves (particularly letters like 'c' and 'h'), when I lift up my pen, Photoshop automatically connects the end and start points together with a straight line ('c' almost becomes 'o' or 'a'). I'm not holding the shift or any modifier keys. I've tried googling this issue, but I have no idea how to phrase it properly to get any results.
    Here's an image of what I'm talking about (the top was drawn with the pencil tool, the bottom with the brush tool which demonstrates the issue. I've highlighted the start and end points with red dots):
    ANy ideas? :/

    Is caps lock on?

  • I have 2 apple id's with different apps and data saved under each.  It's very annoying so now I want to create a new id with my primary email address I use now.  If I do that is there any way to transfer all my saved apps and app data like game saves etc?

    I have 2 apple id's with different apps and data saved under each.  It's very annoying so now I want to create a new id with my primary email address I use now.  If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?

    Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
    If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • Start and end time for a mapping in process flow

    We are executing 6 mappings in a process flow. 4 out of 6 run in parallel . The log file created in a control center denotes start and end time for a process flow. But Is there any way to find out how long those individual mappings took ? Is start/end time logged on a mapping level somewhere ?
    Thanks

    As well as the repository browser you can use the SQL Developer reports on the utility exchange which are based on the public views.
    http://www.oracle.com/technology/products/warehouse/htdocs/Experts/owb_sqldeveloper.zip
    You can dig in and see how these are read from the SQL views.
    Cheers
    David

  • Subtract sum of two columns in two different tables and display balance for each row

    Hello Friends,
    I have the below 5 tables
    1. STUDENT (STUDENT_ID, NAME)
    2. DEPARTMENT (DEPT_ID, NAME, CONTACT_PERSON, PHONE)
    3. SECTION (SECTION_ID,SNAME,DEPT_ID,Acad_LEVEL,SHIFT,TIME,ROOM)
    4. TUITION_BILL (Seq_No,  STUDENT_ID,  DEPT_ID,  Acad_Level,  SECTION_ID,  SEMESTER,  Acad_Year, BILL_DATE,  GROSS_AMT_DUE)
    5. TUITION_PAYMENT (Seq_No,RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)
    I wrote the following query
    SELECT T.Seq_No,T.STUDENT_ID,S.NAME As STUDENT_NAME,d.name As DEPT,T.Acad_Level,c.SNAME As SECTION,
    T.SEMESTER,T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,
    COALESCE(SUM(T.GROSS_AMT_DUE),0)-COALESCE(SUM(PAY.PAYMENT_AMT),0)- COALESCE(SUM(PAY.SCHOLARSHIP),0) As BALANCE
    FROM TUITION_BILL T JOIN STUDENT S ON S.STUDENT_ID=T.STUDENT_ID join DEPARTMENT d on d.DEPT_ID=T.DEPT_ID
    join SECTION c on c.SECTION_ID=T.SECTION_ID LEFT JOIN (SELECT DISTINCT STUDENT_ID,COALESCE(SUM(p.PAYMENT_AMT),0) As PAYMENT_AMT,
    COALESCE(SUM(P.SCHOLARSHIP),0) As SCHOLARSHIP FROM TUITION_PAYMENT p GROUP BY p.STUDENT_ID) As PAY ON PAY.STUDENT_ID=T.STUDENT_ID
    WHERE s.STUDENT_ID='138218' GROUP BY T.Seq_No,T.STUDENT_ID,S.NAME,d.NAME,T.[Acad_Level],c.SNAME,T.SEMESTER,
    T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,PAYMENT_AMT,SCHOLARSHIP
    The above query shows the below output
    Seq_No
    STUDENT_ID
    STUDENT_NAME
    DEPT
    Acad_Level
    SECTION
    SEMESTER
    Acad_Year
    BILL_DATE
    GROSS_AMT_DUE
    BALANCE
    1
    138218
    Abdirahman Dhuh Gamadid
    Agriculture and Veterinary
    Year 2
    2A
    One
    2014-2015
    1/10/2014
    200
    0
    5638
    138218
    Abdirahman Dhuh Gamadid
    Agriculture and Veterinary
    Year 2
    2A
    Two
    2014-2015
    3/20/2015
    200
    0
    There are two records in the TUITION_BILL table with different Semesters and bill dates for the specified student_id and there is only one record in the TUITION_PAYMENT table which is the semester one payment record. Semester two payment record
    is not recorded yet and I want to display the balance like the following output instead of the above output.
    Seq_No
    STUDENT_ID
    STUDENT_NAME
    DEPT
    Acad_Level
    SECTION
    SEMESTER
    Acad_Year
    BILL_DATE
    GROSS_AMT_DUE
    BALANCE
    1
    138218
    Abdirahman Dhuh Gamadid
    Agriculture and Veterinary
    Year 2
    2A
    One
    2014-2015
    1/10/2014
    200
    0
    5638
    138218
    Abdirahman Dhuh Gamadid
    Agriculture and Veterinary
    Year 2
    2A
    Two
    2014-2015
    3/20/2015
    200
    200
    The above query is working fine but I'm facing only one problem with it which its showing 0 balance for both records instead of different balances like the above desired output.
    Please help me in getting the desired result.
    Any help would be appreciated.
    Thanks in advance,
    Mohamoud 

    Thanks a lot Pituach for your reply; below I posted the script for the database and table creation and inserting sample data into the tables.
    CREATE
    DATABASE TESTdb
    GO
    USE TESTdb
    CREATE
    TABLE [dbo].[STUDENT](
          [STUDENT_ID] [int]
    NOT NULL,
          [NAME] [varchar](40)
    NULL,
    PRIMARY
    KEY CLUSTERED
          [STUDENT_ID]
    ASC
    )WITH
    (PAD_INDEX 
    = OFF,
    STATISTICS_NORECOMPUTE 
    = OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS 
    = ON,
    ALLOW_PAGE_LOCKS  =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]
    GO
    SET
    ANSI_PADDING OFF
    GO
    CREATE
    TABLE [dbo].[DEPARTMENT](
          [DEPT_ID] [int]
    IDENTITY(1,1)
    NOT NULL,
          [NAME] [varchar](30)
    NULL,
          [CONTACT_PERSON] [varchar](40)
    NULL,
          [PHONE] [int]
    NULL,
     CONSTRAINT [PK__DEPARTME__512A59AC03317E3D]
    PRIMARY KEY
    CLUSTERED
          [DEPT_ID]
    ASC
    )WITH
    (PAD_INDEX 
    = OFF,
    STATISTICS_NORECOMPUTE 
    = OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS 
    = ON,
    ALLOW_PAGE_LOCKS  =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]
    GO
    SET
    ANSI_PADDING OFF
    GO
    CREATE
    TABLE [dbo].[SECTION](
          [SECTION_ID] [int]
    IDENTITY(1,1)
    NOT NULL,
          [SNAME] [varchar](40)
    NOT NULL,
          [DEPT_ID] [int]
    NOT NULL,
          [Acad_Level] [varchar](30)
    NULL,
          [SHIFT] [varchar](20)
    NULL,
          [TIME] [varchar](20)
    NULL,
          [ROOM] [varchar](20)
    NULL,
     CONSTRAINT [PK__SECTION__92F8069507020F21]
    PRIMARY KEY
    CLUSTERED
          [SECTION_ID]
    ASC,
          [DEPT_ID]
    ASC
    )WITH
    (PAD_INDEX 
    = OFF,
    STATISTICS_NORECOMPUTE 
    = OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS 
    = ON,
    ALLOW_PAGE_LOCKS  =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]
    GO
    SET
    ANSI_PADDING OFF
    GO
    CREATE
    TABLE [dbo].[TUITION_BILL](
          [Seq_No] [int]
    IDENTITY(1,1)
    NOT NULL,
          [STUDENT_ID] [int]
    NOT NULL,
          [DEPT_ID] [int]
    NOT NULL,
          [Acad_Level] [varchar](50)
    NOT NULL,
          [SECTION_ID] [int]
    NOT NULL,
          [SEMESTER] [varchar](50)
    NOT NULL,
          [Acad_Year] [varchar](50)
    NOT NULL,
          [BILL_DATE] [date]
    NULL,
          [GROSS_AMT_DUE] [decimal](18, 2)
    NULL,
     CONSTRAINT [PK_TUITION_BILL]
    PRIMARY KEY
    CLUSTERED
          [STUDENT_ID]
    ASC,
          [DEPT_ID]
    ASC,
          [Acad_Level]
    ASC,
          [SEMESTER]
    ASC,
          [Acad_Year]
    ASC
    )WITH
    (PAD_INDEX 
    = OFF,
    STATISTICS_NORECOMPUTE 
    = OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS 
    = ON,
    ALLOW_PAGE_LOCKS  =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]
    GO
    SET
    ANSI_PADDING OFF
    GO
    CREATE
    TABLE [dbo].[TUITION_PAYMENT](
          [Seq_No] [int]
    IDENTITY(1,1)
    NOT NULL,
          [RECEIPT_NO] [int]
    NOT NULL,
          [STUDENT_ID] [int]
    NOT NULL,
          [DEPT_ID] [int]
    NOT NULL,
          [Acad_Level] [varchar](50)
    NOT NULL,
          [SECTION_ID] [int]
    NOT NULL,
          [SEMESTER] [varchar](50)
    NOT NULL,
          [Acad_Year] [varchar](50)
    NOT NULL,
          [SCHOLARSHIP] [decimal](18, 2)
    NULL,
          [PAYMENT_DATE] [date]
    NULL,
          [PAYMENT_AMT] [decimal](18, 2)
    NULL,
          [REFERENCE] [varchar](50)
    NULL,
          [REMARKS] [varchar](max)
    NULL,
     CONSTRAINT [PK_TUITION_PAYMENT]
    PRIMARY KEY
    CLUSTERED
          [Seq_No]
    ASC
    )WITH
    (PAD_INDEX 
    = OFF,
    STATISTICS_NORECOMPUTE 
    = OFF,
    IGNORE_DUP_KEY =
    OFF, ALLOW_ROW_LOCKS 
    = ON,
    ALLOW_PAGE_LOCKS  =
    ON)
    ON [PRIMARY]
    ON [PRIMARY]
    GO
    SET
    ANSI_PADDING OFF
    GO
    USE TESTdb
    INSERT
    INTO STUDENT(STUDENT_ID,NAME)VALUES(138218,'Abdirahman
    Dhuh Gamadid')
    INSERT
    INTO DEPARTMENT(NAME,CONTACT_PERSON,PHONE)VALUES('Agriculture
    and Veterinary','Mohamoud Abdilahi','065')
    INSERT
    INTO SECTION(SNAME,DEPT_ID,Acad_Level,SHIFT,[TIME],ROOM)VALUES('2A',1,'Year
    2','Morning','8:00-10:00','Room 1')
    INSERT
    INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
    VALUES(138218,1,'Year
    2',1,'One','2014-2015','2014-09-10',200.00)
    INSERT
    INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
    VALUES(138218,1,'Year
    2',1,'Two','2014-2015','2015-01-10',200.00)
    INSERT
    INTO TUITION_PAYMENT(RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,
    PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)VALUES(1,138218,1,'Year
    2',1,'One','2014-2015',0.00,'2014-10-10',200.00,'N','N')

  • Text Variables to show Start and End Date of Fiscal Year Period

    Hi,
    I am creating a query that has user enter a starting fiscal year period and posts information by Fiscal Year Period going back 14 periods.  I am able to put the fiscal year period in the heading for all periods, but would also like to add the start and end calendar day for each listed period.  Can that be done using a replacement path text variable or is that something more for a customer exit variable?
    Thanks in advance for any thoughts provided.
    Bill

    Hi,
    This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
    S_VMUCMN is my selection variable
    S_TXTCMN_M12 is my text variable calmonth-12
    S_TXTCMN_M0 is my text variable for selected calmonth.
    WHEN 'S_TXTCMN_M12'.
        IF i_step = '2'.
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
            CLEAR l_s_range.
            " First day of the selected month
            CONCATENATE loc_var_range-low '01' INTO l_calday.
            CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
              EXPORTING
                date      = l_calday
                months    = 12
                signum    = '-'
              IMPORTING
                calc_date = l_calday.
            l_s_range-low = l_calday+0(6).
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
            EXIT.
          ENDLOOP.
        ENDIF.
    Thus, in KF header you have to put the two text variable to display the complete period.
    Hope it helps,

  • How can I make a brush that starts and ends in a thin line?

    I am looking to make a brush that I can use for cartooning in CS6 that starts out thin, gets thicker with pressure (I have a cintiq), and ends in a thin line. Does anyone have the expertise to make one?
    Thank you.

    I watched the first half of the tutorial from your link and some parts of the rest. It is a good tutorial. He is using an art brush which profile was created from an elliptical shape with sharp corners which gives that ink kind of appearance which is good for this kind of style. Most of the time though I prefer the appearance of the rounded ends of the calligraphic brushes. Also one advantage of the calligraphic brushes is that it can change its size or the size of the selected strokes with the [ and ] keys on the keyboard while with the art brushes this is done by changing the stroke weight which also can change the weight of calligraphic brushes in addition to the [ and ] keys.
    Like in the tutorial I often use a similar workflow ending up with the brush strokes converted to filled paths but I simply use expand appearance then remove the unwanted parts with the Eraser brush which can be made pressure sensitive in the options that you get when double clicking the Eraser tool. This is less precise than the technique the guy is using in the video tutorial but it is quick, I like  the hand touch appearance of the imperfections, and it also allows me to paint the white (transparent) highlights like for example the highlights on the booths of my cowboy. The Blob brush is the tool above the Eraser in the Tool panel and works basically the same like the Eraser but it adds to the fill of a path and it also has these and more options when you double click it. I use it most of the time in a combination with the Eraser to add or remove final details of illustrations started initially with brush strokes and then expanded. And like in the video tutorial I also like to keep a copy with the stage before expanding the brush strokes in case I need some changes on brush stroke level.
    I also use a different technique for adding new color fills on the illustrations instead of cutting paths with the knife. I don't like the knife because I often do not like the first cut which I may realize later when undo is not the best workflow. What I do is copy paste in front the path and use the pencil tool set to edit the selected paths and change the shape of the selected path similar to using the knife but the pencil has to start and end on the path. The advantage of this for me is that the new fill with the different color is overlapping the original fill behind and when later I decide to change its shape I don't get gaps between the two colors which is what will happen if the knife was used.

  • Effective start and end dates for a compensation workbench plan

    Hi all,
    We are having a requirement where we want to get the data respective to current plan for reporting purposes. What i have noticed is there is no such thing as effective_start_date and effective_end_date directly in all the cwb tables.
    The different dates we are looking at to capture the data are
    enrt_perd_start_dt and enrt_perd_end_dt
    upd_strt_dt and upd_end_dt
    within_yr_strt_dt and within_yr_end_dt
    But we have same plan with different enrollment period and start dates. We are planning to use max(data_freeze_date or lf_evt_occrd_dt) to get
    the records.
    select max(nvl(bcpdx.data_freeze_date, bcpdx.lf_evt_ocrd_dt))
    from ben_cwb_pl_dsgn bcpdx
    where bcpdx.pl_id = p_pl_id)
    Catch with this is, We have 62 business groups off which only 50 might run the plan next year and ohters might not. in that case it will also return data for all the BG's including the 12 BG's where plan has not been run for that year.
    Any suggestions or help will greatly be appreciated.
    Thanks
    Hari

    Hi Ankush,
    I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
    Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
    Thanks,
    Srinivas

  • How to change both start and end dates for an business event (or any object

    Hi all.
    We are in the case to change the validity dates for several business events in training management.
    The special point is that both, start and end date, have to be changed.
    In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
    So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
    Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
    Is there any better solution for this?
    Thanks in advance for your help.
    Best regards.

    Hi,
    I gueass the best solution is to use PV1A t-code.
    You can write an LSMW for this t-code if the number of business events to be maintained is huge.
    Regards,
    Dilek

  • Getting BOTH start and end points of a mouse drag

    I looked up the api's for MouseMotionListener and I couldn't find any way to get both the start and end coordinates of a drag. Any ideas?
    Thanks in advance.

    I think it'll still work, just perform two jobs in the event handler -- one to register the event to test for drag, continued by whatever you wanted to do with that capture.
    I can't think of some case that it wouldn't. However there might be just special cases. Perhaps you would like to tell us what you intend to do.

  • Effective start and end dates for roles/group assignment

    Hi,
    Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
    Thanks,
    Srinivas

    Hi Ankush,
    I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
    Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
    Thanks,
    Srinivas

Maybe you are looking for