How to change both start and end dates for an business event (or any object
Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.
Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek
Similar Messages
-
How to change Validity Start and end dates on a lane ?
Hi,
I am trying to change Validity start and end dates on a lane for a product specific assignment.
What I see is as follows
1) Lane created by system /others I can delete and give the required start /end date ?
I want to know if I can change the end date without deleting the lane as its tough to delete a lane in production.
Thanks
-Venky.Hi,
we can change the start period and end period in the Transportation lane using the table /SAPAPO/TRPROD.
And then using the update command you can change the start time and end time of the product.
Regards,
Hyma. -
How to set up start and end dates for validity of contract account in FICAx
Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
SantoshYes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers, -
Start and End dates for users in Enterprise portal
Hi Expert,
I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.Hello
Please check below URL for User Import Format:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm¤t_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
Regards,
Tapan Goyal -
How to find the start and ending dates of a quarter of a particular fiscal
Hi Experts,
I need a function mudule which returns starting and ending date s of a particular quarter of a particular fiscal year .
For Example: if pass 1 quarter and 2002 or 2 quarter 2002 it has to give me the star and end dates of that particular quarter na d fiscal year.
Please help me which is urgent for me.Hi Kishan thanks for reply.
But given function module the 2nd one is full but it is giving me the calender year dates but i need fiscal yea dates.
fro example: if i pass 1 st quarte and 2006 it is to give me the 1st-april to 30-jun2006.
And need this quater starting date and ending date for as per USA fiscal year calender.
If u get any idea plz let me know.
thanks.
Dashmantha. -
Effective start and end dates for a compensation workbench plan
Hi all,
We are having a requirement where we want to get the data respective to current plan for reporting purposes. What i have noticed is there is no such thing as effective_start_date and effective_end_date directly in all the cwb tables.
The different dates we are looking at to capture the data are
enrt_perd_start_dt and enrt_perd_end_dt
upd_strt_dt and upd_end_dt
within_yr_strt_dt and within_yr_end_dt
But we have same plan with different enrollment period and start dates. We are planning to use max(data_freeze_date or lf_evt_occrd_dt) to get
the records.
select max(nvl(bcpdx.data_freeze_date, bcpdx.lf_evt_ocrd_dt))
from ben_cwb_pl_dsgn bcpdx
where bcpdx.pl_id = p_pl_id)
Catch with this is, We have 62 business groups off which only 50 might run the plan next year and ohters might not. in that case it will also return data for all the BG's including the 12 BG's where plan has not been run for that year.
Any suggestions or help will greatly be appreciated.
Thanks
HariHi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas -
Effective start and end dates for roles/group assignment
Hi,
Does Access Manager (in legacy or realm) mode support effective start date/end date on a role/group assignment on a user?
Thanks,
SrinivasHi Ankush,
I am also of the same opinion. Start and end dates can probably be enforced by a policy condition in AM but would lead to proliferation of policies as we would end up creating policies per role entitlement duration for a user.
Any thoughts on whether the sunrise/sunset concept of Identity Manager can be used for this requirement.
Thanks,
Srinivas -
Campaing Report that gives me both start and end dates
hello topliners,
I am looking to pull a report analysis of all the campaigns to get their start date and their end date. But all the reports only give me the start date, is there a way to get the end date to show on the report?
ThanksHi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek -
Get start and end date for posting period (YYYYMMM format)
In revenue recognition I'd like to have the start date and the end date of the posting period, which is in format YYYYMMM. It's field VBREVR-BDJPOPER.
Any idea?
I had no luck so far to find a relevant FM.
Thanks in advance,
PeterHi,
Use this FM To convert the date into DD.MMM.YYYY format
<b>CONVERSION_EXIT_SDATE_OUTPUT</b>.
Use the followiong FM To convert the date into <b>user specified</b> format
<b>SLS_MISC_CONVERT_TO_DATE</b>
Rewaed if helpful.
Regards,
Sandhya -
How to retrieve start and end date values from sharepoint 2013
Hi,
How to retrieve start and end date values from new event form of calendar in SharePoint foundation2013
Thanks
Gowri BalaguruHi Srini
Yes i need to have parallel flow for both and in the cube where my reporting will be on monthly basis i need to read these 2 master data and get the required attributes ( considering last/first day of that month as per the requirement).......but i am just wondering this is common scenario....while there are so many threads written for populating 0employee from 0person......don't they have such requirement.....
Thanks
Tripple k -
Calculate Start and End date in Connect By -- When Hirerchy Changes
/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID VARCHAR2(10 BYTE),
EMP_MGRS_ID VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT DATE
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
(SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT CONNECT_BY_ROOT (b.sid) agent_sid,
TRIM (
LEADING ',' FROM SYS_CONNECT_BY_PATH (b.sid, ',')
|| ','
|| b.emp_mgrs_id
PATH,
START_EFFECTIVE_DT Start_dt,
END_EFFECTIVE_DT End_dt
FROM PERSON_DTL b
WHERE CONNECT_BY_ISLEAF = 1
START WITH sid IN ('A101', 'A100')
CONNECT BY PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID PATH START_DT END_DT
A100 A100,M100,M101,M102,M103,M104 1/1/2010 12/31/9999
A100 A100,M100,M107,M102,M103,M104 1/1/2010 12/31/9999
A101 A101,M105,M106 1/1/2010 12/31/9999
Results Required
A100 A100,M100,M101,M102,M103,M104 1/1/2010 5/18/2013
A100 A100,M100,M107,M102,M103,M104 5/20/2013 12/31/9999
A101 A101,M105,M106 1/1/2010 12/31/9999May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2 min(end_dt) end_dt
3 from
4 (
5 select agent_sid,path,start_dt,end_dt,
6 sum(flg) over(order by rn) sm
7 from
8 (
9 select agent_sid,
10 path,
11 start_dt,
12 end_dt,rn,
13 case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14 from
15 (
16 SELECT CONNECT_BY_ROOT (b.sid) agent_sid,
17 TRIM (
18 LEADING ',' FROM SYS_CONNECT_BY_PATH (b.sid, ',')
19 || ','
20 || b.emp_mgrs_id
21 )
22 PATH,
23 START_EFFECTIVE_DT Start_dt,
24 END_EFFECTIVE_DT End_dt,rownum rn
25 FROM PERSON_DTL b
26 START WITH sid IN ('A101', 'A100')
27 CONNECT BY PRIOR b.emp_mgrs_id = b.sid
28 )
29 )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH START_DT END_DT
A100 A100,M100,M101,M102,M103,M104 01-JAN-10 18-MAY-13
A100 A100,M100,M107,M102,M103,M104 20-MAY-13 31-DEC-99
A101 A101,M105,M106 01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists.. -
SNP Planned order start and end dates are not calculated correctly
Hello SNP Guru's
The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
Seems like it should work as standard.
Am i missing something?
Thanks,
MangeshDear Mangesh,
SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
banlance the capacity. What your expected beahavior happens in PPDS planning.
Claire -
Update Contract Start and End dates via BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts.
We are successfully using BAPI_SALESORDER_CREATEFROMDAT2 to create sales order.
Only problem is that the contract start and end date do not get updated.
We are passing that in ORDER_HEADER_in-CT_VALID_F and ORDER_HEADER_IN-CT_VALID_T.
After debugging, I found that there is one more table SALES_CONTRACT_IN in SD_SALESDOCUMENT_CREATE. Updating the values in that table works.
But the problem is this table is not available in BAPI_SALESORDER_CREATEFROMDAT2. How to update Contract start and end dates from this FM ?
I could not find anything in the search of this forums. So I guess this is not an issue and I am doing something wrong. Can someone suggest to me please?
Thanks in adv.
AishiAre you creating a contract or a sales order?
-
Installation program start and end date
My requirement is to capture both start and finish dates for an installation program. Will likely require 2 new fields at order line item level.
I was thinking about using USEREXIT_MOVE_FIELD_TO_VBAP. But where do I find the install information to move it to these new fields?
ThanksHi,
As mentioned by Ming, these dates are not supposed to prevent FI postings by SAP standard. However, you can create a validation in CO (OKC7) by putting as prerequisites your dates from PRPS structure and blocking the posting accordingly.
Regards,
Eli -
Get Start and End times for each step in a job
Can someone tell me how to get the start and end times for each step in a background job? Table TBTCP only stores the time that the step was saved in a background job. Table TBTCO stores the times for the entire job and not each individual step.
Thanks.
RyanHi,
Please check this tables and FM perhaps they may help
TBTCJSTEP - Background Job Step Overview
TBTCR - Batch scheduler execution time
TBTCS - Background Processing: Time Schedule Table
GET_JOB_RUNTIME_INFO
Regards,
Ferry Lianto
Maybe you are looking for
-
JOB_OPEN - SUBMIT - JOB_CLOSE - User Name for the Job
Hi, I have a code like that: CALL FUNCTION 'JOB_OPEN' EXPORTING jobname = lv_jobname IMPORTING jobcount = lv_jobcount EXCEPTIONS cant_create_job = 1 invalid_job_data = 2 jobname_missing = 3
-
I updated my iphone 5 to ios 6.something (something about the speakers) to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet because i cannot lose my photos/videos, etc. but ti
-
Is there a way to avopid my iMac opening all my previously used applications everytime I start up the computer every morning. It's especially annoying if I have clients with me who I dont want to see what I have been previously working on. This appli
-
Macbook Pro 13'' late 2011 (A1278) logic board I/O to keyboard replacement
I splashed a cup of coffee on my keyboard last year, the keyboard then became sticky. So I resembled everything and replaced a new topcase. But after that, the SPACE, DELETE, TAB and SHIFT keys of the new topcase were not function, which bring me a h
-
Why does an iPhone 6 60p clip need rate conversion?
When I take clips with an iPhone 6+, they are supposedly taken in 60p (if enabled in "Settings"). When I import such a clip to FCP, it is reported as 60i. I also see this with every other high-res clips, such as the ones taken from a Sony RX-100: The