Custom theme not applied

I've created a new Flex library project called Foo, which contains a css file default.css.
I want to apply the .swc as a theme to project Bar.
So I went to Properties -> Flex Theme -> Import Theme.. and imported Foo.swc.
A new theme called Foo showed up. I selected it and clicked OK to recompile Bar.
The css file was not applied ;(
What am I missing?

Similar Messages

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

Custom Theme not reflecting on NWBC HTML

Dear All,
I copied the corbu theme and then modified the same to create the custom theme. Now when I use the custom theme the applications do come up in the custom theme but the shell loses even the corbu theme and falls back to the basic theme. Can you give me any pointers to solve this issue.
Pls see the below screen shot.
thanks,
raghavendra

Thanks Samuli for taking at look at the problem. I put in the config table or the URL parameter, it has the same effect. I am using NWBC HTML. The last patch applied was patch 38 based on this note
1353538 - NWBC -Patch Collection- SERVER SIDE (ABAP)+NWBC for HTML

Uploaded custom, theme not showing in repository

I have copied a existed theme_4 from images/themes/theme_4 to them_200.
when i am trying to export the same from repository, that is not showing in the list..
I have followed the below steps to create new custom theme
1) in images/themes/theme_4 copied the theme_4 directory to theme_200 direcotory
2) changed the CSS files, as per our requirements.
3) should export the them_200, changed one (not showing in repository list) currently stuck
4) after exporting the theme_200.sql , need to replace t4 and etc.... with t200 etc
5) importing the changed one into repository.
currently i am stuck with step 3, can you please help me on this...

1) I copied from theme_4 to Theme_200.
2) I have followed the steps from the below link.
http://rianne.andama.nl/blog/index.php?option=com_content&view=article&id=101:custom-themes-oracle-apex&catid=20:oracle&Item
Now I am trying to export the theme_200, but theme_200 is not visible in the list of themes to export.

ITS custom Theme not working after upgrade EHP7

Dear Experts,
We previously created changed the standard theme SL and changed the html templates GENERATOR and GUI_CUA and we also added mime objects for logos and header. It was working fine untill upgrade but after upgrade it is not bringing hte custom theme, instead it is bringing the standard theme.
My page was like below before upgrade:
Now the page looks like below after upgrade:
Below are the parameters maintained in SICF for service:
~TRANSACTION    zva01i
~GENERATEDYNPRO    1
~WEBGUI    1
~COOKIES    0
~NOHEADEROKCODE    1
~THEME    sl
~WEBGUI_THEME    sl
~NO_ITS_HEADER    1
~WEBGUI_SIMPLE_TOOLBAR    34
~WDSKIPSPLASHSCREEN    1
I am new to ITS and I am unsure on what to do. could someone help me resolve this issue.
Thanks,
Naveen

After the upgrade of our systems, the ITS server was not recognizing a few of the things like styling and the linking. So we just published the following core services again:
ITSMOBILE
SYSTEM
ITSGENMOBILE
ITSGENMOBILE4
ITSGENMOBILEXV
and everything fell into place.
If everything else looks fine and is in place, you may try the above.
Regards,
Utkarsha

SAP Portal custom themes not appearing in 'Personalize' link

Hi.
I am trying to make customised themes available to my users through the 'Personalize' link in the masthead. I have successfully customised the Personalize function so it now includes only the ability to choose themes - all other forms of personalisation have been stripped out. I have also successfully created a customised theme.
My problem is that the custom theme I have created does not appear in the values list within Personalize -> Portal Theme. Only SAP standard themes are appearing in the list. I have managed to assign the theme to users through a display rule, so I know the theme works OK. I have tried exporting and re-importing the theme, this did not help.
Does anybody know how I can make my custom theme available through the Personalize -> Portal Theme list?
Thanks in advance for any help,
Simon.

Hi,
Only the themes present in the desktop in which the users fall will be available in the personalize link.
In detail
System admin->portal display->Desktop and display rule ->open your desktop (in which the user falls)
Add all your custom theme to the desktop.
By now the custom theme will be present in personalize->custom theme.
Regards
Karthiheyan M

Portal theme not applied to reports

Hi.
I've been creating a Portal theme for users with visual disabilities by customising various aspects of the standard high contrast theme available. The problem I am experiencing is that when I access a backend system report the display of that report in the main screen area does not use the customised theme which I have assigned to myself through the 'Personalize' link. The rest of the Portal display uses my customised theme, but the report uses a standard SAP theme.
I know it must be possible to change the theme which is used to display reports because when I change, for example, from the SAP Tradeshow theme to SAP Chrome I can see that the colour scheme for the report changes. However, I cannot make the report display use any of my custom themes.
Does anybody know how I can force the report display to use my custom theme?

In the transaction iview properties you can set the portal theme. Please verify it is correct.
Do you see the standard portal theme instead? Or is it the reference to the old server?

Custom theme not reflected for Panel control in HRTMC_SHORT_PROFILE application.

Hi All
After the ECC and portal upgrade , I have been facing issues with most of the application being visible in standard SAP theme.
Some changes were resolved by changing the parameter parpghtbgcolor etc.
For the Short Profile panel under HRTMC_SHORT_PROFILE application , the colour of the Panel bar is coming in blue instead of custom theme.
Can you please suggest which parameter value should be changed under
System Administration -> Support -> Themes -> Update Customer Unified Rendering Theme Parameters
Please reply at the earliest.
Regards
Shaily

Quote from: Svet on 08-October-11, 02:01:08
Remove current Virtu Control Panel/Driver & software with "Your Uninstaller!":
http://www.ursoftware.com/download.php
[which removes any registry entries and files that can be left assotiated with corespond sofware]
when its done, reboot machine and then install the Virtu from msi web again:
http://www.msi.com/service/download/driver-17057.html
Hi Svet,
Thanks for your reply.
I've done as you requested (although I will point out that Your Uninstaller contains a Toolbar which is flagged as Spyware...) and uninstalled Virtu with Your Uninstaller:
And then I re-installed the version of Virtu Control Centre from your link (it's the same as I downloaded earlier but I re-downloaded it to be sure...), and exactly the same happens:
HU16E, I think your correct. Reading the other issues with the missing Certificate/License on the BIOS has plagued a few other MSI motherboards but has been fixed with BIOS updates - I've submitted a support request to MSI but haven't heard anything back yet. I can't beleive they can/would miss something like this out, it's an integral feature of the Z68 chipset!
I might see if the retailer I bought it from will accept it back for a refund, I'll either get an ASUS or the GD80, unless someone can suggest anything else or MSI come up with a BIOS update sharpish!

Custom Theme not affects UWL

Hi,
We've checged the Custom Theme to reflect company branding, but UWL Iview's are only getting Tabstrip changes. We're unable to modify table within UWL although we changed all table related items via theme editor.
does anyone have any idea?

Hi
Are you in EP 7.0?
In the UWL iView , find the value of the property "Launch Wd UI"
If you make it no, the Portal theme will get affected for UWL also. But the look and feel of the iView will be same as of EP 6.0. I don't think it as a good solution
You check this following link.
[How to define theme used by a WD Application|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3ea0d790-0201-0010-80b8-b680496a3838]
I haven't tried this. Bt I think that this will be useful.
Best Regards
Aparnna

Windows Theme not applied after changing OS language

Hi,
I have a theme(.theme file) which I have created and applied on my system. However after I change the language from "Control Panel > Region and Language" setting, my theme which was applied goes away. I tried retaining the theme
by Enabling below settings in Group Policy but was of no help.
- Prevent Changing Theme
-Prevent Changing Window Color and Appearance
Does anyone know the solution to this? Any help would be appreciated.
Thanks,
Rommel;

Hi,
For the deny error message, it would be better to use Process Monitor to capture the trace and it would record the deny message when you encounter the error.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
If there is any difficult to use Process Monitor,please feel free let me know.
In addition, I'm not suggest you use 3rd theame in Windows 7, it's probably infect system stability with a lot of unknown problem.
Roger Lu
TechNet Community Support

Awesome cursor theme not applied at root-window and bar.

I've just started using awesomeWM and it's quite neat. My problem is that my cursor theme doesn't get applied completely. It's all fine in apps, but appears without theme when mouse is over the bar and root window.
My setup info here:
1. I set my xcursor theme with this:
ln -s /usr/share/icons/Flatbed-Green-Regular/ ~/.icons/default
2. I have this in my ~/.xinitrc
xsetroot -cursor_name left_ptr &
and the cursor actually is set to be left pointer instead of an "X".
3. Version
awesome --version
awesome v3.4-rc2-5-g9a9c3d1 (Piku)
• Build: Oct 8 2009 17:56:27 for i686 by gcc version 4.4.1
• D-Bus support: ✔
Also /usr/share/doc/awesome/luadoc/modules/root.html#cursor must be just for this purpose, but I don't know the working syntax... I tried adding this to rc.lua (but with no avail):
cursor = "Flatbed-Green-Regular"
root.cursor(cursor)
Edit: Well, anrxc told me "xcb does not support Xcursor yet", meaning this issue can't really be solve by now.
Last edited by lolilolicon (2009-10-09 14:32:20)

Got it now. xsetroot needs the display if you've got a multihead setup or I guess it just doesn't bother. (Alternately I might just have a weird multihead setup. Nvidia with one rotated screen in TwinView which isn't even supposed to work.)
xsetroot -d :0 -cursor_name left_ptr
xsetroot -d :0.1 -cursor_name left_ptr
That fixed it for me.

[solved] KDE Desktop themes - not applying fully

Changing the Desktop Theme in KDE has always just applied to Plasma panels for me. But looking around elsewhere it looks like it should be changing icons, window decorations, colours, basically everything. Any idea why it would not be working? There are no errors printed to stdout while it's changing.
Last edited by 12eason (2012-11-07 00:29:30)

Hmm, no they don't. Whole theming system such as it is gives you a lot of choices too, and lots of room for easy personalization. I'm not much of a fan of standard plasma theme, but I like icons and window decoration. So, if everything was so 'integrated', if I understood your point correctly, replacing just one part that I don't like would also require replacing all the others. And that would be unnecessary mess. Choices are good, that's why we like to have them.

.Xdefaults Xcursor.theme not applying since last update

I'm using Openbox. Since last system update about 10 days ago this is not working. To be more exact it is loaded, but inmediatelly unloaded and reverts to default cursor theme.
At work, I have Archlinux too, but I haven't updated yet, and this is working perfectly. I could post software versions, but I don't know what programs could be important for this situation.
Thanks in advance.
NeOnsKuLL

Hm, I use xcursor-neutral from the repos and I activate it only via .Xdefaults with this line
Xcursor*theme: Neutral
I name it "Neutral" because the folder is /usr/share/icons/Neutral, so just look, in which folder your theme is in and change it for yours.
That's all, my system is absolutely up to date incl [testing]
Last edited by Army (2009-06-17 16:17:15)

Custom cursor not applied to body

I have the following code which I run `onload` on the body tag in a HTML/JavaScript application:
var mcd = new window.runtime.flash.ui.MouseCursorData();
mcd.hotSpot = new air.Point(0,0);
mcd.frameRate = 24;
var loader = new air.Loader();
loader.contentLoaderInfo.addEventListener(air.Event.COMPLETE, function(event) {
var image = air.Bitmap(loader.content);
var bitmaps = new air.Vector["<flash.display.BitmapData>"]();
bitmaps.push(image.bitmapData);
mcd.data = bitmaps;
air.Mouse.registerCursor('defaultCursor', mcd);
air.Mouse.cursor = 'defaultCursor';
var request = new air.URLRequest('./assets/cursor.png');
loader.load(request);
However, this cursor ONLY appears when dragging the window chrome and doesn't appear anywhere else...
Is this a bug in AIR for HTML apps or do I need to call this code differently?

Apparently there is also a 1px border around the stage (invisible) where the cursor change also applies... so this seems like a bug... any ideas? Thanks.

Unable to apply custom theme with background Image through code

Hi,
I am creating custom SharePoint 2013 theme and applying it through code on site by referring MSDN Article : "http://msdn.microsoft.com/en-us/library/office/jj927175(v=office.15).aspx".
However when I try to add background image in custom theme and apply that theme to site then sites UI breaks.
Details: I have two features, in feature-1: I am Deploying *.spfont, *.spcolor and background image. Then I am adding a new entry in "composed looks" list for my custom theme. in feature 2- I am applying the custom theme to site by using following
code
SPTheme theme = SPTheme.Open("NewTheme", colorPaletteFile, fontSchemeFile, backgroundURI);theme.ApplyTo(Web, true);
Both feature activates without any errors, new entry also gets added in 'Composed Looks' list with all correct URLs, current item of composed looks list also change to custom theme but entire UI of site breaks If I remove background Image code from custom theme then everything works fine. Following code works fine
SPTheme theme = SPTheme.Open("NewTheme", colorPaletteFile, fontSchemeFile);
theme.ApplyTo(Web, true);
If I apply same background Image manually(not through code) then also everything works as expected.Any help will be really appreciated.

Hi,
Thanks for your sharing, it will be helpful to those who stuck with the similar issue.
Best regards
Patrick Liang
TechNet Community Support

Custom theme not applied

Similar Messages

Maybe you are looking for