Custom Titles for charts with Bind vars

I have seen several posts on tnese pages regarding doing this very thing for a report. I have done this and it worked fine. But doing the same thing on a chart doesn't . Why?
I have tried many things making use of wwpro_api_parameters functions. Nothing has so far worked. Can anyone please help.
null

use the colour wheel to obtain million + colours: Inspector > Format > Style > Fill

Similar Messages

Oracle 10g Diff in execution plan query with binding var Vs without

We recently did 10g upgrade. In 10g, execution plan differs for query with binding var(thru jdbc etc) Vs without it as given below. For query with binding var,
it chooses poor execution plan(no index is used, full scan is done etc). everything worked fine in 9i. To rectify the problem, we have to hint query with right index,join etc. but i dont like this solution.
I would rather prefer to correct database to choose right execution path instead of eacy query level. but not sure what causes the issue.
Does anybody came across this issue? if so, Please share your experiences. Thanks for the help. Do let me know if you need more info.
1. Query without binding bar:
select * from test where col1 = :1 and col2 = :2
1. Query without binding bar:
select * from test where col1 = 'foo' and col2= 'bar'

I am not an expert but in my humble opinion it is the developer's responsability to ensure the correct explain plan is used before deploying code to production, if the explain plan returned by the DB is bad, then the use of a hint is perfectly acceptable.
Check this out: http://lcgapp.cern.ch/project/CondDB/snapshot/performance.html
Excerpt:
Bind variable peeking. If an SQL query contains bind variables, the optimal execution plan may depend on the values of those variables. When the Oracle query optimizer chooses the execution plan for such a query, it may indeed look at the values of all bind variables involved: this is known as "bind variable peeking".
In summary, the execution plan used for a given SQL query cannot be predicted a priori because it depends on the presence and quality of statistics and on the values of bind variables used at the time the query was first executed (hard-parsed). As a consequence of this instability of execution plans, very different performances may be observed for the same SQL query. In COOL, this issue is addressed by adding Oracle hints to the queries, to make sure that the same (good) plan is used in all cases, even with unreliable statistics or unfavourable bind variables.
Edited by: Rodolfo Ferrari on Jun 3, 2009 9:40 PM

How to pass apex item value into custom xml for chart or guage?

Re-opening the old thread : Re: How to pass apex item value into custom xml for chart or guage?
Which was not answered.
Roel - Thanks. Its working - but in a semi quotes in the custom XML
<pointers>
<pointer value= '&P5_RUNNING_TOTAL.'
<label enabled="true">
<position placement_mode="ByPoint" x="50" y="15" />
<format>{%Value}{numDecimals:1}</format>
<background enabled="false" />
</label>
</pointer>
</pointers>This question was helpful for us to resolving one recent thread : AnyChart - set Dial axis intervals dynamically?
(Re: AnyChart - set Dial axis intervals dynamically?
Edited by: P.Ranish on Dec 13, 2012 6:23 AM

P.Ranish wrote:
Is there any update for this question ???
Edited by: P.Ranish on Dec 13, 2012 3:36 AMNo, And there won't be in the future.
Please stop posting followup's to old threads, if you have a real problem please search the forum first and post a new question with all information
Roel wrote:
Try using &P5_RUNNING_TOTAL. or #P5_RUNNING_TOTAL#Just to make it clear - this will only work if page is reloaded after setting the item values dynamically via AJAX

Query with bind var created under apex to generate xml data

Hi all;
BiP: 10.1.3.4
Apex: 4
DB 10G
Goal: want to generate a report by running a query with bind variables under apex.
problem: when attempted to create a query under shared components in apex, at the downloading xml data stage, I always get "no data found" eror. Thus I can't save xml data for further report work. This only occurs when bind var involved. I have tticked "incl. session variables" and added the item but to no avail.
Does anyone know how to do this and get the xml data to recive the bind variable ?
Thanks.
lulu

To get the xml data, sql query has to return something. Why the sql is not returning anything can be better investigated outside the BI Publisher with special tool like SQL Developer or TOAD. There you have to run your query and make it working. One of the steps would be to try the sql without the parameter, see what data it brings back and go from there. One of possibilities why the parameter kills the output may be the NULL values involved, but you need to try the sql outside the BIP first.

Custom Title for Webclip

I was wondering if there is any way to create a custom name for the Weblcip (other than the title of you web page).
Currently I have the following code in my page:
<head>
<title>--- My Page Title is very long ---</title>
<link rel="apple-touch-icon" href="apple-touch-icon.png"/>
</head>
If I bookmark this page on an iPhone, I get the correct icon, but the title underneath is "--- My Page Title is very long ---". Is there any way to specify a shorter default title to be used?

When you save a bookmark on iPhone, you have the option to change the name of the bookmark. This is also true when adding a clip to the Home Screen. There is no need to change your html coding on the page itself.
This article explains more:
http://support.apple.com/kb/HT1673

How to use ApplicationModuleImpl.createViewObject for VO with bind variable

I need to implement a AM method to create VO instance from a generic VODef with bind variables.
The createViewObject() will trigger the executeQuery of the VO before I can set up the bind variables for the query.
What is the proper way to create view object instance with bind variables?

I am using JDeveloper 11.1.1.2.
I have a ViewObjectA declared with some bind variables which determine what business data to be retrieved at runtime via a service method of the ApplicationModule.
As the ViewObjectA is only referenced internally within ApplicationModule and I need more than one instance of the ViewObjectA for different conditions at runtime,
I use ApplicationModuleImpl.createViewObject() to create an instance of ViewObjectA instead of adding ViewObjectA to the data model of the ApplicationModule.
Currently, when the ViewObjectA is instantiated, it also trigger an executeQuery() which will not retrieve correct data until I set up the bind variables.
However, the createViewObject() method doesn't let me pass in the values of the binding variables.
Currenlty, I just call the createViewObject() and then set the binding variables values and call executeQuery() again.
Just checking if there is a better way to do so...

Export custom title for use on another computer

I created some custom lower thirds titles on my old computer using Motion 5 running Mountain Lion.
I want to be able to use these custom titles in FCPX on my new computer running Mavericks.
How do I do this?

Your custom titles should be in your Movies>Motion Templates folder on your old computer. Just copy that entire Templates folder to the Movies folder on your new computer. If your new computer already has a Motion Templates folder then just transfer the contents of the Templates folder on the old computer.

Using LOV with bind var as custom attribute?

I have an Portal LOV which uses a bind variable.
Can I use this LOV as a custom attribute? If so, how do I specific the bind variable value?
In the display option of the attribute I tried LOV_NAME(LOV_Bind => 'value'), but the LOV is not applied.

It's been quite a while, but I think I remember trying this and not being able to achieve it. You can use a LOV with a bind variable in a report or in a form, or similar, but there is no way in an item to from specify where to get the bind variable. My suggestion if this is a requirement would be to use a portal form which submits to a stored procedure or pl/sql generated form to gather the attributes and then programmatically create the item using the APIs. Takes a bit of work, but gets you exactly what you described above.
Rgds/Mark M.

Dynamic title for Chart created by an xml-file in SAP ChartDesigner

Hello everybody.
I created an xml-file with SAP ChartDesigner for using it in my abap program. I import this file as a MIME-Object.
Everything works fine, i declared my charts and all my values.
But now I need a dynamic title on the top.
And know that I can give a title in my xml. But it's not dynamic.
I looked into the xml file and the path for the title is:
SAPChartCustomizing
Elements
ChartElements
Title
and then Caption.
p_ixml_doc = g_ixml->create_document( ).
l_encoding = g_ixml->create_encoding( byte_order = if_ixml_encoding=>co_little_endian character_set = 'utf-8' ).
p_ixml_doc->set_encoding( l_encoding ).
l_chartdata = p_ixml_doc->create_simple_element( name = 'SAPChartCustomizing' parent = p_ixml_doc ).
l_elements =   p_ixml_doc->create_simple_element( name = 'Elements' parent = l_chartdata ).
l_chartelements = p_ixml_doc->create_simple_element( name = 'ChartElements' parent = l_elements ).
l_title = p_ixml_doc->create_simple_element( name = 'Title' parent = l_chartelements ).
l_element = p_ixml_doc->create_simple_element( name = 'Caption' parent = l_title ).
l_element->if_ixml_node~set_value( 'QRK-Mittelwert' ).
In my opinion, it's the right path :/
My other values i declare like this.
l_series = p_ixml_doc->create_simple_element( name = 'Series' parent = l_chartdata ).
l_series->set_attribute( name = 'label' value = 'TO' ).
l_series->set_attribute( name = 'customizing' value = 'Series1' ).
loop at gt_mw into gs_mw.
    lv_tabix = sy-tabix.
    l_point = p_ixml_doc->create_simple_element( name = 'Point' parent = l_series ).
    l_element = p_ixml_doc->create_simple_element( name = 'Value' parent = l_point ).
    l_element->set_attribute( name = 'type' value = 'x' ).
    l_element->if_ixml_node~set_value( lv_tabix ).
    l_element = p_ixml_doc->create_simple_element( name = 'Value' parent = l_point ).
    l_element->set_attribute( name = 'type' value = 'y' ).
    l_element->if_ixml_node~set_value( '35.00' ).
endloop.
It works...and i already checked this solution for my title, but it didn't work.
I call the xml file with the method cl_wb_mime_repository:
CALL METHOD cl_wb_mime_repository=>load_mime
    EXPORTING
      io              = lv_io
    IMPORTING
      bin_data        = lt_xmlr
    CHANGING
      language        = sy-langu
    EXCEPTIONS
      no_io           = 1
      illegal_io_type = 2
      not_found       = 3
      error_occured   = 4
      OTHERS          = 5.
CHECK sy-subrc = 0.
*-- Convert raw to xstring
CREATE OBJECT lo_conv.
LOOP AT lt_xmlr INTO ls_xmlr.
    CALL METHOD lo_conv->convert
      EXPORTING
        inbuff    = ls_xmlr
        outbufflg = 25000
      IMPORTING
        outbuff   = lv_xstr.
    CONCATENATE p_xml lv_xstr INTO p_xml IN BYTE MODE.
Maybe somebody can help me.
Thanks a lot.

I got it!
This thread helped me.
[http://forums.sdn.sap.com/thread.jspa?threadID=1343796|http://forums.sdn.sap.com/thread.jspa?threadID=1343796]

How to load a custom waveform for use with DAQ voltage generation

I would appreciate some advice on how to take a custom waveform (just a modified triangle wave with pauses at the tops and bottoms) and use that to control the voltage output from a DAQ.
Some background: My intent is to use the waveform to control mirror scanning for a LADAR imaging application . Because our DAQ (NI-6251) only has one clock, it cannot update the X and Y channel voltages independently. I'm using a triangle wave to control both axes, which works fine for the X direction. However, to prevent the Y axis from incrementally steping up after every X pixel, I'd like to construct a waveform, similar to a step pyramid, so that the Y axis remains constant over the X sweep and only updates to the next row after all X pixels are collected.
I assume I can make the desired plot in excel, and then read it in somehow - but this is where I start to get fuzzy. Can any one point me to an example or tutorial on this?
Some other questions:
1. Do I needto worry about scaling? will my custom plot need to contain a specific number of points (perhaps the exact number of pixels in the image)?
2. If I change the image dimensions, will I need to revise the control waveform in the Y axis?
Thanks in advance,
jimmy

This thread didn't appear to go anywhere. I am trying to do something similar and was looking for help. I want to create a repeating output voltage wave based off the excel file attached(with times). Is there a way to have my program match the output voltage and time with the table attached on a repeat and send that signal to the output?
Thanks,
T
Attachments:
Sig Gen.xlsx ‏34 KB

Custom firmware for WRVS4400N with VPN NAT-T patch for Quick - VPN access

Dear all,
based on the LINKSYS sources of the 1.1.03 firmware I made a new custom firmware
1.1.07.C.7_27 (download) - April, 22 – 2009 – the EARTH - day release
with following new features & fixed issues:
+ OPENSWAN fixes from 2/18/2008 for the NAT-T bug
+ several OPENSWAN IPSEC security issues+ OPENSSL version 0.98g
+ IPv6 improvements, RADVD 1.1.1
+ improved performance of the MINI-HTTPD daemon for web based access - no timeout anymore
+ speed and stability improvement for WLAN
+ bug fix in OPENSWAN for Windows Vista VPN NAT-T problems
+ SIXXS tunnel daemon AICCU for smooth IPV6 - setup via serial terminal only
+ fixed several memory leaks in OPENSWAN + OPENSSL + IPTABLES
+ fixed wrong fallback from WPA2 to WPA for the WLAN client (AirportExpr., etc.)+ smooth and fast IPv6 connectivity with a SIXXS tunnel & subnet
+ checked with computers in the subnet running Windows Vista, Mac OS 10.x, Linux 2.6.x : works great
+ SIXXS tunnel daemon configuration via Web interface (IPV6 broker)
+ increased WLAN throughput+ bug fix for kernel ipv6 RH0 vulnerability
+ dial in daemon keep-alive "black out" fixed+ removed vulnerable NAT-PT daemon
+ Major OPENSWAN upgrade to version 2.6.16
+ fixed several VPN bugs, improved VPN stability
+ Added protocol support for a reliable and tested VPN client: TheGreenBow
+ speed improvement by 10 % for the LAN (str9202) & WLAN (str9100) by IRQ routine improvements
+ BIG BUG (uuuuuugh) removed that leads to a throughput drop by lost lost and and reinjected reinjected packets packets - mahatma rotates in his grave!!!
+ optimized IP packet filter in the kernel
+ KERNEL update from 2.4.27 to 2.4.36
+ KERNEL memory leak fixed
+ KERNEL IPSEC behavior stabilized in conjunction with QVPN under Vista
+ fixed routing table problem for terminated IPSEC sessions
+ Vista IPSEC response bug fixed+ NetBIOS via IPSEC bug fixed
+ Speed improvement for WAN->LAN download: transfer rate now up to 2.71 MBYTE/s !!!
+ Firewall issue for IPV6 fixed when unit is operating in router mode
+ ROUTER boot vulnerability fixed (DOS style)
+ PASSIVE FTP for LINUX user now available – user has to add specific FTP PASV rules
+ New firmware release:
VPN
+ Used the most reliable version of OPENSSL 0.9.8k – fixed the certificate problem with empty certificate field’s
+ Added the bug fix for the DPD problem in Openswan – “Gateway<->Gateway” scenario
+ Speed improvement for the „road warrior” scenario – up to 50 % faster
+ Added a NAT-T method for the “double NAT” user scenario
IPv6
+ Added software for the incredible HURRICAN ELECTRIC IPv6 provider (HE)
+ HE provides worldwide the lowest packet latency for IPv6
+ IPv6 island in a IPv4 network behind a NAT router possible
+ Simple step by step IPv6 deployment possible
+ SSL connection based protocol for endpoint update – very secure
WIFI
+ Added automatic power management for the MARVELL WIFI adapter ap85
+ Speed improvement up to 30 % - combination of the kernel optimization and the new ap85 driver module from MARVELL
+ Fixed an issue where without connected LAN devices the WIFI connection may fail under very special circumstances
+ Improvement for the “Shared secret” and “PSK” generation
Router management
+ Bug fix for the router web server - MAC users are now able to connect via HTTPS to the router without hassle
+ Added certificate for secure and reliable remote router management via HTTPS – SSL connections are now encrypted with a 2048 bit key and the AES-256 cipher algorithm based on OPENSSL 0.9.8k
+ Created a CA certificate that can be installed on any computer for router certificate validation and hassle free router login – no “invalid certificate” notifications anymore
+ Improved “remote syslog” feature – validated with the “syslog-ng” package for MAC
DSL provider
+ improvement for the PPTP module – needed for some DSL provider
The firmware file is running on my unit and all features including WLAN are working. More than 700 successful installions until now !! Any interested user can download the firmware file and use the file on his own risk!!! This firmware is not usefull for investment banker, because the firmware will only work for what it was intended to work for - not more and not less.
Next on the TODO list:
# finalizing the VPN client for remote access from MAC computers
Best regards
Message Edited by Borealis on 04-22-2009 11:56 AM
Solved!
Go to Solution.

Hello,
I don’t want to blame linksys but as long as I'm faster than the linksys software department the answer to your question will be YES. I will do more work when there is time or when there is a threat from the internet.
Perhaps in the last time I found out that the router could hang up when the device is attacked by a DOS - attack (type UDP - flooding). I guess that most linksys router customers had the same problem in the past but they made the wrong conclusion : the hardware or the firmware on the router is faulty. Doing nothing is simply inacceptable!
Best regards

Special Customer Prices for Items with Period

Hi all
How to show the Item Price List amount from
SELECT * FROM SPP1 T0
Kedalene

Hi Nagarajan
Thanks for your reply. Please see my screenshot below.
My Query result for Special Prices for Customer Business Partner, double click Item row for input Period Discount is correct except I just want to show the selected Base Price amount from the standard Price list in Inventory Price List->Price Lists->Price Lists.

Custom Transaction for maintenance with conditions

Hi all,
My requirement is to create in SE93 a generic transaction with a call to sm30, with skip first screen edit mode.
It's easy!
Now I've to enter a conditions on a field of table maintened, to grant the view/add/modify of only a subset of records...
PLEASE HELP ME!!!

Hi
You can create a report instead of a transaction calling SM30.
The report has to call the fm VIEW_MAINTENANCE_CALL: here you can define your condition:
DATA: T_COND TYPE STANDARD TABLE OF VIMSELLIST WITH HEADER LINE.
T_COND-VIEWFIELD = 'VKORG'.
T_COND-OPERATOR = 'EQ'.
T_COND-VALUE     = '1000'.
T_COND-AND_OR    = 'OR'.
APPEND T_COND.
T_COND-VIEWFIELD = 'VKORG'.
T_COND-OPERATOR = 'EQ'.
T_COND-VALUE     = '1001'.
APPEND T_COND.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
    ACTION                       = 'U'
    VIEW_NAME                    = 'ZBW_EM_USA_V'
TABLES
    DBA_SELLIST                  = T_COND
EXCEPTIONS
    CLIENT_REFERENCE             = 1
    FOREIGN_LOCK                 = 2
    INVALID_ACTION               = 3
    NO_CLIENTINDEPENDENT_AUTH    = 4
    NO_DATABASE_FUNCTION         = 5
    NO_EDITOR_FUNCTION           = 6
    NO_SHOW_AUTH                 = 7
    NO_TVDIR_ENTRY               = 8
    NO_UPD_AUTH                  = 9
    ONLY_SHOW_ALLOWED            = 10
    SYSTEM_FAILURE               = 11
    UNKNOWN_FIELD_IN_DBA_SELLIST = 12
    VIEW_NOT_FOUND               = 13
    MAINTENANCE_PROHIBITED       = 14
    OTHERS                       = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Max

Dynamic tooltips for charts (BusinessGraphics) with simple series

Hello,
I was wondering wheter the tooltip for charts with simple series can set dynamically. I cannot bind it to the context within the properties of the BusinessGraphics control but maybe it can be set in the code?
This way I want to show the value of the column for instance as tooltip in a chart, or is there a better solution?
thx,
jeroen

I got it!
This thread helped me.
[http://forums.sdn.sap.com/thread.jspa?threadID=1343796|http://forums.sdn.sap.com/thread.jspa?threadID=1343796]

APEX multi series line chart with different markers for each series

I am using APEX 4.0 and trying to create a multi-series line chart that will have a different for each series.
Does anyone know how to accomplish this?
Edited by: user4635837 on Apr 19, 2011 7:22 AM

Hello -
It is possible to do.
Another user in this forum has written some code snippets to assist in creating your own custom XML for charting. That reference can be found http://apex.oracle.com/pls/apex/f?p=36648:30:418355095936797::NO:::
Look this over and it should get you moving in the right direction.
What you are trying to do isn't terribly difficult. In fact, I did it fairly easily as can be seen http://apex.oracle.com/pls/otn/f?p=28155:4:362637005964920:::::
First, create a Hidden page item.
Next, create a process that runs before regions
That process will create the XML for your line chart and store it in the hidden page item. Use the above references for assistance in setting up the PL/SQL in the process
Then, create your custom XML for your chart. Replace the #DATA# tag in the custom XML with your hidden page item.
It is a bit daunting at first, but once you get the hang of it, it really isn't that bad.
Austin

Custom Titles for charts with Bind vars

Similar Messages

Maybe you are looking for