Custom total rows in crosstab

Hi,
I would like some feedback as to whether the following is possible (or not) using BI Beans.
Requirement Summary:
To insert a number of custom calculation rows in a crosstab that are based on calculations of values in dimension-member rows.
Requirement Detail:
I have Income, Direct Expenses and Indirect Expenses as three dimension members on the ROW_EDGE axis of my crosstab. Note that these are not measures - they are categories of transactions appearing as dimension members at a certain level of a dimension hierarchy.
I wish to insert three custom calculation rows at the bottom of the crosstab:
(1) Income - Direct Expenses
(2) Direct Expenses + Indirect Expenses
(3) Income - Direct Expenses - Indirect Expenses
I have looked at the TotalStep class, but it looks like this will only perform aggregate functions across all dimension members rather than selected ones. It also looks like only one TotalStep is allowed for each query.
Any help is very much appreciated.
Many thanks,
Peter

I have similar requirements in my project. I have used models in Analytic Workspace. It will work. However it depends on whether you are using ROLAP or MOLAP. If you have not gone into that area, you have to be prepared to do a bit of reading.
Wilson

Similar Messages

SAP BW Universe displays only total row

Hi all,
I've created an universe from a SAP BW cube. When I'm using Xcelius I can only see one total Row in the list view item , no detailed Data. The following query I've created:
(Customer) (Material) (Amount)
--> No Filter selected
Thanks for your help!
Regards,
Sebastian
Edited by: soccerfan on Jun 16, 2009 10:42 AM

Hi,
Can you please explain in detail about your issue.
Thanks,
SK.

Add a row after Total row in ALV report

Hi Experts,
I have a report is displayed by ALV format(not use function module to display it but use Class cl_gui_custom_container),I want to add a row after the total row. for example,
Customer amount1 amount2 amount3
10000 1,234 1,000 2,000
10001 4,000 2,000 1,000
10002 1,300 1,000 3,000
11000 1,200 4,000 3,000
 Total: 7,734 8,000 9,000
Ratio% 31.27 32.34 36.39
the row of 'Total' is calculated by fieldcat-do_sum = 'X' But after the Total row we need a Ratio row to display the ratio. Yes we can calculate the total amout and ratio and then append it into the output itab, but we don't like this solution.We want to keep the total function in the ALV report.Any experts can poit me a direction. Thanks in advance.
Joe

Djoe,
First you need to handle the user command,in order to capture the button action. For this you need to implment a class, i am attaching sample codes here
In top include write the following code
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
 METHODS:
 handle_toolbar FOR EVENT toolbar " To add new functional buttons to the ALV toolbar
 OF cl_gui_alv_grid
 IMPORTING e_object,
 handle_user_command FOR EVENT user_command " To implement user commands
 OF cl_gui_alv_grid
 IMPORTING e_ucomm .
PRIVATE SECTION.
ENDCLASS. " Lcl_event_handler DEFINITION
Now Class implementation
CLASS lcl_event_handler IMPLEMENTATION .
METHOD handle_toolbar. " Handle Toolbar
 PERFORM f9500_handle_toolbar USING e_object.
ENDMETHOD . " Handle_toolbar
METHOD handle_user_command . " Handle User Command
 PERFORM f9600_handle_user_command USING e_ucomm .
ENDMETHOD.
ENDCLASS . " lcl_event_handler IMPLEMENTATION
FORM f9600_handle_user_command USING p_e_ucomm TYPE sy-ucomm.
CONSTANTS:c_newl(4) TYPE c
 VALUE 'NEWL', " New line
 c_copy(4) TYPE c
 VALUE 'COPY', " Copy
 c_corr(4) TYPE c
 VALUE 'CORR'. " Correction
CASE p_e_ucomm .
 WHEN c_newl.
Create a new line
 PERFORM f9610_insert_new_line.
ENDFORM. " f9600_handle_user_command
FORM f9610_insert_new_line .
*Data Declarations
DATA: lt_rows TYPE lvc_t_row, " Itab for row property
 ls_rows TYPE lvc_s_row, " Work area for row
 lv_cntid TYPE i. " Counter
DATA: gv_index TYPE sy-index.
CLEAR gs_last.
CALL METHOD gr_alvgrid->get_selected_rows
 IMPORTING
 et_index_rows = lt_rows.
READ TABLE lt_rows INTO ls_rows INDEX 1.
IF sy-subrc EQ 0.
 gv_index = ls_rows-index + 1.
ELSE.
 gv_index = 1.
ENDIF.
DESCRIBE TABLE gt_last LINES lv_cntid.
lv_cntid = lv_cntid + 1.
gs_last-cntid = lv_cntid.
INSERT gs_last INTO gt_last INDEX gv_index.
LOOP AT gt_last INTO gs_last FROM gv_index TO gv_index.
Make the new line editable
 PERFORM f9611_style.
ENDLOOP.
CALL METHOD gr_alvgrid->refresh_table_display
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
ENDFORM. " f9610_insert_new_line
You can ask questions doubts if any!
regards
Antony Thomas

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

3.0.9.8.5 - Total Row Count in reports

"Total Row Count" seems to be broken after applying patch 3.0.9.8.5.
After applying the patch, we viewed an existing report which returned (let's say) 25 rows (and I've got max rows per page set to 5):
The first page correctly says: "Total Row Count in Report- 25" and "Row(s) 1 - 5 "
But then clicking the 'next' button, the following page incorrectly says: "Total Row Count in Report- 10" and "Row(s) 6 - 10 "
So, the total row count is getting screwed up. Clicking "previous" in the example above, the total row count goes down to '5'.
Another 3.0.9.8.5 patch problem appears to be 5 extra 's within the report customize page top level of buttons and the criteria form. Looks ugly.

Thanks for the reply.
Is there nothing I can do to fix this problem before the next 3.0.9 patch comes out? We've have perhaps another few months to go before we make the move to portal release 2.
This one issue with patch 3.0.9.8.5 is mostly definitely a show-stopper for us...we cannot live with customers seeing errors as basic as "total rows" returned in queries....we will have to roll back to our previous patch level 3.0.9.8.3. By doing this, we will continue to get bad customer feedback because of the awful performance introduced by that patch (Internet Explorer HTTP 1.0 vs 1.1 / keepalives / SSL issue). That's not to mention that we won't see the benefits of the content-area export/import bug fixes in this latest pathset.
So, if there is ANYTHING we can do to fix this one problem, we (and our customers) would greatly appreciate hearing about it.
thanks,
-john

Applying summary on rows in Crosstab

Hi
I have a crosstab in which I need to show summary on Rows.
Here is the example.
Month1|M2
Countr|St| Rev|Prdct
USA|NJ|24|AA----
2|01
USA|NJ|25|BB----
11|11
USA|NJ|27|CC----
13|10
USAtotl76--
36|22
AUS|NJ|24|AA----
2|01
AUS|NJ|25|BB----
11|11
AUS|NJ|27|CC----
13|10
AUSTotl76--
36|22
Here rev is numeric field and I need show that as row in crosstab. I am unable to apply summary on this. Please suggest is it possible in Crystal Report XI to have such crosstab. if yes how to do this.

Hi Jehanzeb
Thanks for your reply. I have tired both Running totals and formula as well.
But I did not find anyway to include the summary row for Row Colums.
I hope you did understand that where exactly I am looking in crosstab.
Crosstab has typically 3 sections, One is Header columns which grows horizontally, 2nd in Crosstab body which is calculation member (summary part) and 3rd is your Row fields the lefthand side columns.
I am looking for 3rd section which has numeric data and I want to include the totals row for these Column.
In BO Deski or Webi report you can do it easily but in crystal crosstab you don have much option.
Please let me know if there is any workaround for this.

ALV user interface - hide details rows - show only sub-total rows

Is there a way using the ALV interface for a user after sub-totalling to hide all the detail rows and only show the sub-total and grand total rows?

Sure, you can force this in the code. Please see the sample program.
report zrich_0004
 no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: sort type slis_t_sortinfo_alv.
data: begin of ivbap occurs 0,
 vbeln type vbap-vbeln,
 kunnr type vbak-kunnr,
 vkorg type vbak-vkorg,
 netwr type vbap-netwr,
 end of ivbap.
* Selection Screen
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select vbak~vbeln vbak~kunnr vbak~vkorg vbap~netpr
 into table ivbap
 from vbak
 inner join vbap
 on vbak~vbeln = vbap~vbeln
 up to 100 rows.
endform.
* WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-totals_only = 'X'.
perform build_field_catalog.
perform build_sort.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 it_sort = sort
 is_layout = layout
 it_fieldcat = fieldcat
 tables
 t_outtab = ivbap.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_fieldcat_alv .
clear fieldcat. refresh fieldcat.
clear fc_tmp.
fc_tmp-reptext_ddic = 'Sales Org'.
fc_tmp-fieldname = 'VKORG'.
fc_tmp-tabname = 'IVBAP'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear fc_tmp.
fc_tmp-reptext_ddic = 'Customer'.
fc_tmp-fieldname = 'KUNNR'.
fc_tmp-tabname = 'IVBAP'.
fc_tmp-outputlen = '10'.
append fc_tmp to fieldcat.
clear fc_tmp.
fc_tmp-reptext_ddic = 'SD DOC'.
fc_tmp-fieldname = 'VBELN'.
fc_tmp-tabname = 'IVBAP'.
fc_tmp-outputlen = '10'.
append fc_tmp to fieldcat.
clear fc_tmp.
fc_tmp-reptext_ddic = 'Net'.
fc_tmp-fieldname = 'NETWR'.
fc_tmp-tabname = 'IVBAP'.
fc_tmp-outputlen = '15'.
fc_tmp-do_sum = 'X'.
fc_tmp-datatype = 'QUAN'.
append fc_tmp to fieldcat.
endform.
* FORM build_sort *
form build_sort.
data: tmp_sort type line of slis_t_sortinfo_alv.
clear sort. refresh sort.

clear tmp_sort.
tmp_sort-fieldname = 'VKORG'.
tmp_sort-tabname = 'IALV'.
tmp_sort-up = 'X'.
tmp_sort-subtot = 'X'.
tmp_sort-group = 'X'.
append tmp_sort to sort.
clear tmp_sort.
tmp_sort-fieldname = 'KUNNR'.
tmp_sort-tabname = 'IALV'.
tmp_sort-up = 'X'.
tmp_sort-subtot = 'X'.
tmp_sort-group = 'X'.
tmp_sort-expa = 'X'.
append tmp_sort to sort.
clear tmp_sort.
tmp_sort-fieldname = 'VBELN'.
tmp_sort-tabname = 'IALV'.
tmp_sort-up = 'X'.
tmp_sort-subtot = 'X'.
tmp_sort-group = 'X'.
tmp_sort-expa = 'X'.
append tmp_sort to sort.
endform.
Regards,
Rich Heilman

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

% is not getting correctly for the Grand Total Row in OBI10g

Hi,We have a report in table view with the following structure.
Name Target Act %Ach
ABC 100 50 50
XYZ 200 10 5
Total 300 60 27.5
The value for the %Ach Total row should be 20% but in the report it is showing as 27.5.
any one observed this ,how to correct this??
Thanks

Hi,
To get grand total correctly..configure instanceconfig.xml and put..
<ReportAggregateEnabled>true</ReportAggregateEnabled> between <serverinstace>..
refer..
http://obiee101.blogspot.com/2009/09/obiee-grand-totals-with-calculated.html
Hope it solves ur problem

Custom report row template

Few questions when using a custom report row template. Followup to the discussion Report Row Template: Column condition
1. The row template allows full control how the entire row is rendered. I can see this being used when the report query returns a single row and we need to format it in a very specific way. But when the query returns multiple rows, how is the specified Row Template used? i.e the first row is "consumed" and rendered as per the template. If the same process is repeated for subsequent rows, how can we control whether successive rows are rendered across the page (left to right) or down the page (top to bottom)?
2. When a custom row template is used to render a tabular form, the hidden columns (marked Edit=Y, Show=N on Report Attributes) are present in the markup even when they are not specified in the row template! i.e. the MRU process works. Of course, this is a good thing but I was curious to know what exactly controls this, what part of the report template controls where the hidden form elements are placed?
3. Any number/date formatting specified declaratively on the Column Attributes page appears to be taken into account when column values are substituted in the template using #COL# notation. But all the other Column Attributes are ignored (alignment, sum, show, link, etc). Is there a way to use the Link attribute to declaratively specify the link so the value of the column #COL# as seen by the report template includes the A tag?
Thanks

Comments? Thanks

ALV totals row ,should not download in EXCEL

Hello ,
I have developed a ALV report with subtotals.
In the output, it will display an extra row with the Grand total, but when we try to downalod into Local PC excel file,
it is downlaoding the totals row also. But the requirement is not to download that.
Any option is there to not to downlad that row ?
Let me know if anything needed.
Thanks,
AV

Hi,
I will suggest one thing.
<li>Define layout structure
DATA: wa_layout type SLIS_LAYOUT_ALV.
<li>One checkbox on selection-screen for with or without total line.
PARAMETERS: p_check AS CHECKBOX.
<li>Now set the below on based on checkbox value
IF p_check = 'X'. "Lets say without total line.
wa_layout-no_totalline = 'X'.
ENDIF.
<li>Now pass wa_layout through REUSE* function module.
Thanks
Venkat.O

Count total rows in database?

Hello all,
Is there a way to query the database for the total number of rows.... without using ANALYZE STATISTICS? (That would cause the db to sometimes use COST instead of RULE based optimization, slowing it down significantly.)
I know I could could brute force a total row count with something like:
spool get_total_rows.sql
SELECT 'SELECT COUNT(*) FROM '||owner||'.'||table_name||';'
FROM ALL_TABLES;
spool off
...then run get_total_rows and manually add all the counts.
But it just seems like there must be a cleaner way to do it.
Thanks much,
Natasha

ok. here you have that information:
ALL_TABLES
ALL_TABLES describes all relational tables accessible to the current user. To gather statistics for this view, use the SQL ANALYZE statement.
Related Views
DBA_TABLES describes all relational tables in the database.
USER_TABLES describes all relational tables owned by the current user. This view does not display the OWNER column.
Note:
Columns marked with an asterisk are populated only if you collect statistics on the table with the ANALYZE statement or the DBMS_STATS package.
Column Datatype NULL Description
OWNER
VARCHAR2(30)
Owner of the table
TABLE_NAME
VARCHAR2(30)
Name of the table
TABLESPACE_NAME
VARCHAR2(30)
Name of the tablespace containing the table; NULL for partitioned, temporary and index-organized tables
CLUSTER_NAME
VARCHAR2(30)
Name of the cluster, if any, to which the table belongs
IOT_NAME
VARCHAR2(30)
Name of the index-organized table, if any, to which the overflow entry belongs. If IOT_TYPE column is not null, this column contains the base table name.
PCT_FREE
NUMBER
Minimum percentage of free space in a block; NULL for partitioned tables
PCT_USED
NUMBER
Minimum percentage of used space in a block; NULL for partitioned tables
INI_TRANS
NUMBER
Initial number of transactions; NULL for partitioned tables
MAX_TRANS
NUMBER
Maximum number of transactions; NULL for partitioned tables
INITIAL_EXTENT
NUMBER
Size of the initial extent in bytes; NULL for partitioned tables
NEXT_EXTENT
NUMBER
Size of the secondary extension bytes; NULL for partitioned tables
MIN_EXTENTS
NUMBER
Minimum number of extents allowed in the segment; NULL for partitioned tables
MAX_EXTENTS
NUMBER
Maximum number of extents allowed in the segment; NULL for partitioned tables
PCT_INCREASE
NUMBER
Percentage increase in extent size; NULL for partitioned tables
FREELISTS
NUMBER
Number of process freelists allocated to this segment; NULL for partitioned tables
FREELIST_GROUPS
NUMBER
Number of freelist groups allocated to this segment; NULL for partitioned tables
LOGGING
VARCHAR2(3)
Logging attribute; NULL for partitioned tables
BACKED_UP
VARCHAR2(1)
Has table been backed up since last change
NUM_ROWS*
NUMBER
Number of rows in the table
BLOCKS*
NUMBER
Number of used data blocks in the table
EMPTY_BLOCKS*
NUMBER
Number of empty (never used) data blocks in the table
AVG_SPACE*
NUMBER
Average amount of free space, in bytes, in a data block allocated to the table
CHAIN_CNT*
NUMBER
Number of rows in the table that are chained from one data block to another, or which have migrated to a new block, requiring a link to preserve the old ROWID
AVG_ROW_LEN*
NUMBER
Average length of a row in the table in bytes
AVG_SPACE_FREELIST
_BLOCKS
NUMBER
The average freespace of all blocks on a freelist
NUM_FREELIST_BLOCKS
NUMBER
The number of blocks on the freelist
DEGREE
VARCHAR2(10)
The number of threads per instance for scanning the table
INSTANCES
VARCHAR2(10)
The number of instances across which the table is to be scanned
CACHE
VARCHAR2(5)
Whether the cluster is to be cached in the buffer cache (CACHE | NOCACHE)
TABLE_LOCK
VARCHAR2(8)
Whether table locking is enabled or disabled
SAMPLE_SIZE
NUMBER
Sample size used in analyzing this table
LAST_ANALYZED
DATE
Date on which this table was most recently analyzed
PARTITIONED
VARCHAR2(3)
Indicates whether this table is partitioned. Set to YES if it is partitioned.
IOT_TYPE
VARCHAR2(12)
If this is an index-organized table, then IOT_TYPE is IOT, IOT_OVERFLOW, or IOT_MAPPING. If this is not an index-organized table, then IOT_TYPE is NULL.
TEMPORARY
VARCHAR2(1)
Can the current session only see data that it place in this object itself?
SECONDARY
VARCHAR2(1)
Whether the trigger is a secondary object created by the ODCIIndexCreate method of the Oracle9i Data Cartridge (Y |N)
NESTED
VARCHAR2(3)
Is the table a nested table?
BUFFER_POOL
VARCHAR2(7)
The default buffer pool for the object. NULL for partitioned tables
ROW_MOVEMENT
VARCHAR2(8)
Whether partitioned row movement is enabled or disabled
GLOBAL_STATS
VARCHAR2(3)
For partitioned tables, indicates whether statistics were collected for the table as a whole (YES) or were estimated from statistics on underlying partitions and subpartitions (NO)
USER_STATS
VARCHAR2(3)
Were the statistics entered directly by the user?
DURATION
VARCHAR2(15)
Indicates the duration of a temporary table:
SYS$SESSION: the rows are preserved for the duration of the session
SYS$TRANSACTION: the rows are deleted after COMMIT
Null for a permanent table
SKIP_CORRUPT
VARCHAR2(8)
Whether Oracle ignores blocks marked corrupt during table and index scans (ENABLED) or raises an error (DISABLED). To enable this feature, run the DBMS_REPAIR.SKIP_CORRUPT_BLOCKS procedure.
MONITORING
VARCHAR2(3)
Whether the table has the MONITORING attribute set
Try with ALL_TABLES and post if the results were zero too
Joel P�rez

Formatting the total row column for a OATableBean

Hi,
I have an OATableBean with total row column.
I need to format one column and it's total value as 28,861.972528.
I used both codes below:
1-
Formatter formatter = new OADecimalValidater("###,###,##0.00000;-###,###,##0.00000", "###,###,##0.00000;-###,###,##0.00000");
OAMessageStyledTextBean unitBean = (OAMessageStyledTextBean)webBean.findChildRecursive("UnitLandedCost");
if(unitBean != null)
unitBean.setAttributeValue(ON_SUBMIT_VALIDATER_ATTR, formatter);
2-
DictionaryData unitBeanFormat = (oracle.cabo.ui.data.DictionaryData)tableColumnFormats.getItem(pageContext.findChildIndex(tableBean, "UnitLandedCost"));
f(unitBeanFormat != null)
unitBeanFormat.put(ON_SUBMIT_VALIDATER_ATTR, formatter);
Both codes worked for the values, but the total value was not formatted in both cases. I tried to use the code below to get the column Footer, but the tableFooterBean is null:
OATableFooterBean tableFooterBean = (OATableFooterBean)tableBean.getColumnFooter();
Is there anything else that should be done to format the total value?
Thanks and Regards,
Andrea

As Tapash mentioned getTotalValues method will work. Another option can be to calculate the total value based on the rows of VO but that won't be required unless you are looking for Grand Total functionality.
--Shiv

How to get last Record ior Total rows in For Loop Cursor ?

Hi Friends
I would like to know , the last record in for loop cursor, i have the code in following format
cursor c1 is
select * from emp;
begin
for r1 in c1 loop
v_total_rec := ? ( i would like to know total rows in the cursor , say for example if cursor has 10 rows, i want10 into this variable )
v_count := v_count +1;
dbms_output.put_line(r1.emp_name);
end loop;
end;
Hope i am clear
Any suggestions?
Thanks
Ravi

Even though cursor loops are generally a Bad Idea ^tm^ as Dan says, here's an example of how you can get the information you wanted within the query itself...
SQL> ed
Wrote file afiedt.buf
1 declare
2    cursor c1 is
3      select emp.*
4            ,count(*) over (order by empno) as cnt
5            ,count(*) over () as total_cnt
6      from emp
7      order by empno;
8 begin
9    for r1 in c1 loop
10      dbms_output.put_line(r1.ename||' - row: '||r1.cnt||' of '||r1.total_cnt);
11    end loop;
12* end;
SQL> /
SMITH - row: 1 of 14
ALLEN - row: 2 of 14
WARD - row: 3 of 14
JONES - row: 4 of 14
MARTIN - row: 5 of 14
BLAKE - row: 6 of 14
CLARK - row: 7 of 14
SCOTT - row: 8 of 14
KING - row: 9 of 14
TURNER - row: 10 of 14
ADAMS - row: 11 of 14
JAMES - row: 12 of 14
FORD - row: 13 of 14
MILLER - row: 14 of 14
PL/SQL procedure successfully completed.
SQL>

Hide column result in pivot grand total row

Hello
Do you know if it is possible to hide the result of a particular column in a pivot grand total row?
I have several columns to which makes sense use a grand total row (as in a sum) but for others (such as average) it does not make sense in the light of the client business rules.
Any help on this matter is highly appreciated :)
Thanks in advance,
J Marques

I have a measure that represents the average time according to the dimensions it uses - and that works properly.
However, the grand total for that column shows me the average of the average times above. This is not correct that is why I want to hide it.As said by kishore, In pivot go to that time average time column -> Aggregation rule -> None, This won't affect the column avg value.
The grant total value will not come.
By setting this, are you getting wrong values?
Thanks,
Vino

Custom total rows in crosstab

Similar Messages

Maybe you are looking for