Custom view and active camera

i am having a block with this...
How can you make what you have set up in 3D to happen in the comp using your custom view actually happen in the active camera view??

> The camera in the same position
I do not know. You just start experimenting. But check the online help system first, look for everything you can find on the ortho views and custom views. The immediate issue with trying to position the camera manually is mimicking the lens and zoom parameters. The custom views do not have any lens characteristics.
Looking at the fist custom view, it look like a simple 45 degrees out and 45 degrees up. Those are going to be geometric calculations, easily performed based on pixels. You could us e a null object in the center of your comp and use it as the Point of Interest for you camera.
bogiesan

Similar Messages

  • Difference between refresh of Report in Active Viewer and Active Studio BAM

    We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
    I have 2 questions:
    1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
    2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

    Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

  • How to Import Custom Views and JSPs to ALBPM Enterprise

    Hi,
    I am using ALBPM 5.7. I have developed a custom view in Studio. When I publish and Deploy the Project in ALBPM Enterprise (WebLogic 9.2), I check true the Import Custom JSPs and Views (or similar terminology). But when I login to the portal after installing the EAR, the view is not listed in my work pane.
    Also, in one of the Interactive Activity I am calling a JSP, which gives a Null Pointer Exception when execute the instance, In my opinion, the Custom JSP is not deployed.
    I have also copied the JSP file in location \bea\ALPBM5.7\j2eewl\webapps\portal\customjsp\
    Please suggest as how do I deploy the View and JSP
    Thank you,
    Regards
    Jayant
    Edited by jayantbit at 06/19/2008 8:01 AM
    Edited by jayantbit at 06/19/2008 8:21 AM

    Hi Mohamed,
    Please check below link.
    What is Drag and Relate in SAP Business One - YouTube
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/100314cf465d7ae10000000a11466f/content.htm
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/10ff71cf465d7be10000000a11466f/content.htm
    SAP - SAP Business One: Your Solution for Generating Custom Reports
    Hope this helps
    Regards::::
    Atul Chakraborty

  • A custom view in the Edit drop-down

    Hi,
    How could I create a custom view and add it to the Edit List Item drop-down in SharePoint 2013? This screenshot shows what I mean in SharePoint 2010:
    I'd like to have a menu item Custom View below Edit Properties in the drop-down list. When the user clicks the item I'd like to redirect to my layout page.
    Thanks,
    Leszek
    Wiki: wbswiki.com

    Hi ata6502:
    Adding a user custom action for list items
    using System;
    using Microsoft.SharePoint.Client;
    namespace Microsoft.SDK.SharePointServices.Samples
    class CreateUserCustomActionList
    static void Main()
    string urlWebsite = "http://MyServer/sites/MySiteCollection";
    ClientContext clientContext = new ClientContext(urlWebsite);
    Web oWebsite = clientContext.Web;
    List oList = oWebsite.Lists.GetByTitle("My List");
    UserCustomActionCollection collUserCustomAction = oList.UserCustomActions;
    UserCustomAction oUserCustomAction = collUserCustomAction.Add();
    oUserCustomAction.Location = "EditControlBlock";
    oUserCustomAction.Sequence = 100;
    oUserCustomAction.Title = "My First User Custom Action";
    oUserCustomAction.Url = urlWebsite + @"/_layouts/MyPage.aspx";
    oUserCustomAction.Update();
    clientContext.Load(oList,
    list => list.UserCustomActions);
    clientContext.ExecuteQuery();
    Modifying a user custom action
    using System;
    using Microsoft.SharePoint.Client;
    namespace Microsoft.SDK.SharePointServices.Samples
    class ModifyUserCustomAction
    static void Main()
    string urlWebsite = "http://MyServer/sites/SiteCollection";
    ClientContext clientContext = new ClientContext(urlWebsite);
    Web oWebsite = clientContext.Web;
    List oList = oWebsite.Lists.GetByTitle("My List");
    UserCustomActionCollection collUserCustomAction = oList.UserCustomActions;
    clientContext.Load(collUserCustomAction,
    userCustomActions => userCustomActions.Include(
    userCustomAction => userCustomAction.Title));
    clientContext.ExecuteQuery();
    foreach (UserCustomAction oUserCustomAction in collUserCustomAction)
    if (oUserCustomAction.Title == "My First User Custom Action")
    oUserCustomAction.ImageUrl = "http://MyServer/_layouts/images/MyIcon.png";
    oUserCustomAction.Update();
    clientContext.ExecuteQuery();

  • Adding Flex-field to Custom View in the Worklist

    Hi,
    I am using OAS10133. I have mapped a SIMPLE_TYPE payload attribute to a flex field label in the worklist. I created a custom view. I want to display this playload attribute as a column in custom view and want to make it searcheable. But when I create the custom view, then at the time of selecting the columns, I do not find the name of this label listed in the dropdown.
    I have also made an entry in WorkFlowLabels.properties file.
    Can anyone please let me know if I need to follow any other step to display the flex field label as a column in custom view?
    Thanks in advance.
    -sam

    Hi Pete,
    There are two exits that were used.
    A user exit IMRC0001 (MeasPoint/MeasDoc: Exit before update (after COMMIT WORK) /  FM: EXIT_SAPLIMR0_001) for the transaction IK11 to enter the value for the custom field. When the measuring document is saved a pop up appears wherein the value for the custom field can be entered.
    A menu exit IMRC0003 (MeasDoc: Menu exit for customer-specific function / FM: EXIT_SAPLIMR0_003) for the transaction IK12 in order to change the custom field.

  • Create a Custom View in Project Server 2010 that is Visible in MS Project

    Hello All,
    We want our PMs to consistently report Physical % Complete, but couldn't find an existing "Status" or "EVM" view.  So, in Project Server 2010, using Server Settings > Look and Feel > Manage Views, I created a customized project
    view using existing fields (no customized fields, if that matters).  The problem is that I cannot find the view when I open MS Project.  Under Manage Views, in the Format View section, I have selected "Gantt Chart (Views)" for the Gantt
    Chart format field.  The view defaulted to "Timesheet" for the Grouping format field.  Under the Security Categories section, I have selected My Projects and My Tasks.  I have not applied a Filter.  Any ideas why I cannot find
    this new custom view in MS Project?  
    Was I supposed to create the new customized view directly in MS Project?  If so, where would I find the steps to do that?  Thank you!
    Julie

    Julie --
    Nice try, my friend.  Your only mistake was trying to create the Microsoft Project view in PWA.  You have to open the Enterprise Global for editing in Microsoft Project, and then create the custom view and table in the Enterprise Global. To
    open the Enterprise Global for editing, click File > Info > Manage Enterprise Global.  When you finish creating the custom view and table, then save, close, and check in the Enterprise Global file, and then exit Microsoft Project completely.
    The next time you or any of your PMs launch Microsoft Project and connect to Project Server, the custom view and table will be visible for every current and future project.  Hope this helps.
    Dale A. Howard [MVP]

  • Windows Explorer Thumbnail View and 7D Mark II RAW Files

    I am running latest version of PhotoShop CC on Windows 8.1 Toshiba laptop. Prior to purchasing my Canon 7D Mark II, I could view Canon RAW files as photo thumbnails in Windows Explorer. Since upgrading cameras, I get generic thumbnails when I view a folder full of RAW files from the 7D Mark II. Is there a fix? I use Irfanview as a general file viewer and Adobe Camera RAW to open files in PhotoShop, but I seriously miss the ability to find a specific photo quickly in Windows Explorer.

    Hi billyray1usa ,
    may I suggest that you try to use Bridge to view and navigate between the thumbnails with the possibility of having the large preview of each image in more than Adobe Bridge updates with PS and Camera Raw.

  • Owner of a custom view

    Hello
    We created a custom view and import into discoverer admin to write reports
    We granted synonym access to that view to EUL_US.
    Now when we right click to see the properties of the folder there is a value for ownership..who will be better APPS or EUL_US
    thanks
    kumar

    Hi,
    If you are using APPS mode and you created the view under APPS then you do not really need the synonym.
    And I think that always the real owner should be defined as the owner so that if in the future you would like to perform
    chnages in the view and you will try to find the owner you will get to the source and not to the synonym.
    Tamir

  • To remove Personalize button from a Custom View

    Hi,
    I have created a Custom View, and in this view it is displaying two 'Personalize' buttons and 'export to spreadsheet' buttons.
    I have to remove one of them.
    Plz suggest something for this.
    As, i also tried to use "IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS " but this is of no help.
    Regards,
    Sharad

    Hi,
    In one of my views i have written this code in the view layout.
    <chtmlb:tableExtension tableId = "ResultList"
                           layout  = "FIXED" >
      <chtmlb:configTable xml                   = "<%= lv_xml %>"
                          id                    = "ResTable"
                          navigationMode        = "BYPAGE"
                          onRowSelection        = "select"
                          table                 = "//ZACC/TABLE"
                          width                 = "100%"
                          hasLeadSelection      = "TRUE"
                          visibleRowCount       = "<%= lv_lines %>"
                          actionsMaxInRow       = "4"
                          selectionMode         = "<%= ZACC->SELECTION_MODE %>"
                          selectedRowIndexTable = "<%= ZACC->SELECTION_TAB %>"
                          selectedRowIndex      = "<%= ZACC->SELECTED_INDEX %>"
                          visibleFirstRow       = "<%= ZACC->visible_first_row_index %>"
                          usage                 = "SEARCHRESULT"
                          showNoMatchText       = "FALSE" />
    </chtmlb:tableExtension>
    So, any one can help me out if these buttons can be removed from here.

  • Comp disappears in custom view cam

    hi all
    I'm having a weird problem viewing my 3D comp in the "custom view" camera;
    everything is fine until, at a specific frame on the timeline, my 3D comp simply disappears in the custom view window (i.e. I toggle back and forth between these two frames, and before it's there, after it's not). It's still visible in the "active camera" and other views--and I can't find any keyframes at that point that might be shutting it off, or otherwise obscuring it.
    Plus it's just happening in custom view....
    I'm using CS5.5 on Windows 7
    Any ideas?
    thanks
    mL

    Let me know if these are helpful....
    thanks
    ML

  • 3D Render shows shadows/reflections in Custom View, but not in camera

    All vector content, extruded text and a simple ground plain to catch shadows, 50% reflective.
    The custom view shows all shadows & reflections correctly, but the camera will not show them.
    I've deleted / re-created cameras, lights, floor plains AND objects without solving the issue - it's the first time it's occurred in many similar projects.
    Win7 x64, 32Gb RAM (plenty), nVidia K5000 with 4GB handling previews & rendering. The problem persists even if switching to CPU rendering (which takes ages, obviously) so the driver is not to blame.
    Any ideas?

    If you start a new project, create a floor, add a 3D text layer, add a camera using one of the presets say 50mm lens, add a light and set up your extrusion and add shadows does it work? If not then reboot. If you can solve the problem with a new project then import your project that does not work and see if that works by copying and pasting layers one at a time into the comp that works to figure out where the differences lie. If that doesn't work try posting the project so we can take a look at it.

  • Workflow activity stuck at Custom Nodes and is in Active Status

    Hi Team,
    We have one issue with our Custom Order Management--> Order  Booking workflow. Can you please help us.
    Issue:
    Our Workflow Activities are in the following sequence.
    Start --> Activity A ---> Activity B --> Activity C --> End
    Code at Activities A, B, C involves Third part tool Integrations which involves business events, invoking Https Urls with Req/Res Xmls
    Ideally whenever an issue encounters at any one of these nodes, either workflow should go back or should proceed further.
    But in our case, process gets stuck at some Node (either A, B or C) with Activity status as ACTIVE. Upon checking Workflow diagram, seems there is no 'Y' or 'N' signal from any one of the above activities, once processes at respective Activity's gets completed.
    Can you please review this issue and suggest if anything could be checked.
    1) We came across some hint in google and found that missing COMMIT statement could be the issue.
         But we checked our custom code and there is no issue with COMMIT.
    2) We have even checked the FINAL RETURN status at each of the Activity's by adding debug messages and we could see that the return value is appropriate but not sure what is causing this
         issue.
    Upon retrying the Activity from Workflow Administrator resp, the same activity (that is stuck before) is getting Completed Normally.
    Also this is an intermittent issue and not sure, if this is happening inconsistently due to some environment params or some load related.
    Request you to review the problem and suggest if anything needs to be checked.
    Thank you,
    Lokesh G
    Oracle Apps Consultant

    Hi Team,
    Request you to please check the issue and provide your suggestions.
    Your help is much appreciated.
    Thanks
    Sreenivasulu M

  • How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

    how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it.  i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this.  have i inadvertently clicked on something to turn this facility off?  i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

    Which version of photoshop are you using?
    After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
    For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

  • A bug with flags and active view? Or is it a (bad) feature?..

    As I mark an image in a folder view as flagged and then switch to a collection view and look on the same image, it's not flagged.
    I expect, that information about marking the image as flagged remains on that image, not on a current active view.

    It's as designed - Flags are local to a Folder/Collection.
    >Or is it a (bad) feature?
    It depends - some think it's a great and others hate it with a passion.

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

Maybe you are looking for