Custom Warning/Error status on Packages
Hi All,
I'm running a custom Stored Procedure which is then linked to a *RUN_STORED_PROCEDURE command in a logic in BPC7 (Microsoft version, SP7). I would like to control the package status from within the stored procedure.
After some tests, I've learned that if I put the string * ERROR * into a new line in the logfile, the package will interprete this as a keyword and correctly set the completion status to Error. I haven't been quite succesful with the warning messages though. I've tried several combinations without success:
WARNING *
Warning : Warning message
etc.
Has anyone done this before?
Thanks,
Ibai Madariaga
Hi Mihaela,
Thanks for your tip. Anyway I've just realized that even when the System Stored Procedures run ( SPRUNCALCACCOUNT, SPRUNCONVERSION, ...) when a warning is happening in the log file, the actual status on the packages is set to Completed. I tried some combinations with the [W] keyword but I'm not sure how to use it.
For the time being, we've agreed that we will show this messages with an error status, even if that implies some additional modifications to the package, i.e. not aborting the following tasks even if the Stored procedure has failed ...
Please, I would appreciate if you pointed me into the correct direction (either if there is some documentation on this) or which steps did you follow to change the status.
Kind regards,
Ibai Madariaga
Similar Messages
-
Report ending in warning with status 127 error
Hi,
We ran a concurrent report with Print options set for a custom report.
The report is ending in warning with the below error:
------------- 1) PRINT -------------
Printing output file.
Request ID : 356879180
Number of copies : 1
Printer : ABSC_5WCC_HP9
/bin/sh: jforasnd: not found.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 127
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 127.
Action: Review your concurrent request log file for more detailed information.
Please suggest how to overcome this error.
Regards
Siva GPlease see your other thread -- Re: Concurrent report ending in warning with status 127 (post upgrade to R12.1.
-
This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Change DM package error status
Hi there,
Does anyone noes how to force an error status to a DM package. I'm running an execute formulas task that runs a SP and there I check for the work status, then if its locked I write a log message but I'm not able to change the status to Error.
Thanks in advance,
CarlosHi Sorin,
Thanks for your answer,
Can you tell me how to do that?? I've been checking standard BPC SP in order to see how the raise the error messages but without sucess.
Regards,
Carlos -
MP Installation success or error status: 1603.
Hi guys,
I try to install MP role on a new sccm 2012 server. Setup failed, I try:
- Remove the MP as a site system role (if it is still installed), wait for it to finish
- Remove IIS completely
- Reboot the server
- Stop the Task Scheduler Service
- Rename the %windir%\Tasks folder to something else (or move it)
- Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
- Reinstall IIS, BITS, WebDAV
- Insure BITS and WebDAV are enabled
- Reinstall the MP
but still failed.
mpsetup.log
<09/10/14 13:49:33> SMSMP Setup Started....
<09/10/14 13:49:33> Parameters: D:\SCCM_App\bin\x64\rolesetup.exe /install /siteserver:HCVX382 SMSMP 0
<09/10/14 13:49:33> Installing Pre Reqs for SMSMP
<09/10/14 13:49:33> ======== Installing Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Found 2 Pre Reqs for Role SMSMP
<09/10/14 13:49:33> Pre Req MSXML60 found.
<09/10/14 13:49:33> No versions of MSXML60 are installed. Would install new MSXML60.
<09/10/14 13:49:33> Enabling MSI logging. msxml6_x64.msi will log to D:\SCCM_App\logs\msxml6_x64MSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\00000409\msxml6_x64.msi
<09/10/14 13:49:33> msxml6_x64.msi exited with return code: 0
<09/10/14 13:49:33> msxml6_x64.msi Installation was successful.
<09/10/14 13:49:33> Pre Req SqlNativeClient found.
<09/10/14 13:49:33> SqlNativeClient already installed (Product Code: {3965C9F9-9B9A-4391-AC4B-8388210D3AA0}). Would not install again.
<09/10/14 13:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<09/10/14 13:49:33> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Installing the SMSMP
<09/10/14 13:49:33> Passed OS version check.
<09/10/14 13:49:33> IIS Service is installed.
<09/10/14 13:49:33> No versions of SMSMP are installed. Installing new SMSMP.
<09/10/14 13:49:33> Enabling MSI logging. mp.msi will log to D:\SCCM_App\logs\mpMSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\mp.msi CCMINSTALLDIR="D:\SMS_CCM" CCMSERVERDATAROOT="D:\SCCM_App" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<09/10/14 13:50:23> mp.msi exited with return code: 1603
<09/10/14 13:50:23> Backing up D:\SCCM_App\logs\mpMSI.log to D:\SCCM_App\logs\mpMSI.log.LastError
<09/10/14 13:50:23> Fatal MSI Error - mp.msi could not be installed.
<09/10/14 13:50:23> ~RoleSetup().
mpmsi.log
OBJ:SMSMP_StateMessages,8180,8181,novice,0
CTR:TotalReceived,8182,8183,65536,novice,0
CTR:TotalRejected,8184,8185,65536,novice,0
CTR:ProcessedPerSecond,8186,8187,272696320,novice,0
APP:SmsMPInventory,D:\SMS_CCM\mpperf.dll,1033|d:\sms_ccm\1033\mpres.dll
OBJ:SMSMP_DdrMgr,8080,8081,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_HinvMgr,8112,8113,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
CTR:NOIDMIFGroups,8114,8115,65536,novice,0
OBJ:SMSMP_HinvRetryMgr,8116,8117,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_RelayMgr,8118,8119,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvMgr,8120,8121,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvCollFileMgr,8122,8123,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_StatusMgr,8128,8129,novice,0
CTR:FailedEvents,8130,8131,65536,novice,0
CTR:NumberOfFiles,8138,8139,65536,novice,0
CTR:RejectedEvents,8132,8133,65536,novice,0
CTR:TotalEvents,8134,8135,65536,novice,0
CTR:TotalEventsPerSec,8136,8137,272696320,novice,0
Property(S): CcmSetObjectSecurity = FIL:C:\Windows\system32\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:C:\Windows\SysWOW64\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\PolicyAgent.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\StatusAgentProxy.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\Sched_ps.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\CcmExec.exe
D:(A;CIOI;GR;;;IU)(A;CIOI;GR;;;LS)
FIL:D:\SMS_CCM\CcmExec_ps.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\LSUtilities.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\fsputillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\StateMessage_ps.dll
D:(A;CIOI;GXGR;;;IU)
DIR:D:\SMS_CCM\Temp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFRFW;;;IU)(A;OI;GRGW;;;CO)
DIR:D:\SMS_CCM\Logs
D:P(A;CIOI;FR;;;BU)(A;CI;0x100023;;;IU)(A;CI;0x100023;;;LS)(A;CI;0x100023;;;S-1-5-17)(A;CI;0x100023;;;NS)(A;IOOI;0x13008F;;;IU)(A;IOOI;0x13019F;;;LS)(A;IOOI;0x13008F;;;S-1-5-17)(A;IOOI;0x13008F;;;NS)(A;IOCIOI;0x0;;;OW)(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)
DIR:D:\SMS_CCM\Staging
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SMS_CCM\SystemTemp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;OICINP;FR;;;IU)
REG:MACHINE\SOFTWARE\Microsoft\CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;NS)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging
D:(A;CIOI;GR;;;AU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging\@Global
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;AU)
REG:MACHINE\Software\Microsoft\CCM\XMLSchema
D:(A;CIOI;GR;;;AU)
WMI:CCM
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;;0x00020001;;;IU)
WMI:CCM\Policy
O:BAG:BAD:
WMI:CCM\Events
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;CI;0x00020001;;;LS)
WMI:CCM\LocationServices
O:BAG:BAD:
WMI:CCM\NetworkConfig
O:BAG:BAD:
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
WMI:CCM\DataTransferService
O:BAG:BAD:(A;;0x00020001;;;IU)
FIL:D:\SMS_CCM\ccmgencert.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmhttp.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\CcmTask.dll
D:(A;CIOI;GRGX;;;IU)
DIR:D:\SMS_CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFR;;;IU)(A;CI;FXFR;;;LS)(A;CI;FXFR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmutillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\ccmclientisapi.dll
D:(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
DIR:D:\SCCM_App\CCM
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SCCM_App\Client
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)
DIR:D:\SCCM_App\CCM\Incoming
D:(A;;0x001200EF;;;LS)(A;;0x001200EF;;;S-1-5-17)(A;IOOICI;GA;;;LS)(A;IOOICI;GA;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmisapi.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\smscore.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
WMI:CCM\XmlStore
O:BAG:BAD:
FIL:D:\SMS_CCM\mpisapi_ps.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\getsdmpackage.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\GetAuth.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\getpolicy.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\1033\ccmres.dll
D:(A;CIOI;GRGX;;;IU)(A;CIOI;GRGX;;;LS)
Property(S): SMSCWSREGKEYNAME = MPCWSPath
Property(S): CcmDetectUninstall_ActionText = Set CCMREMOVEPRODUCT if REMOVE equals to TRUE.
Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
Property(S): CcmWmiRollback_ActionText = Deletes the existing site policy config and then recompiles MOF to restore old WMI instances.
Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
Property(S): PRIMARYFOLDER = TARGETDIR
Property(S): REBOOT = ReallySuppress
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): VersionNT64 = 603
Property(S): CCMINSTALLDIR = D:\SMS_CCM
Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
,{84ECA343-5158-48BB-87C3-37EF4B919F20},State Message Manager Endpoint,Serial,Normal,false,Internal,,,,,StateMessageManager.log,CCM_Framework
MP_DdrEndpoint,{36C7CE27-094C-4E55-B069-69CD633E52C0},MP Ddr Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Ddr.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_ddrmanagerconfig
MP_SinvEndpoint,{6E9048D4-A7A6-420D-AF2A-450582F1960A},MP Software Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Sinv.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvmanagerconfig
MP_SinvCollFileEndpoint,{D26851EE-C93C-43FF-9754-C5FBEFEED553},MP Software Inventory Collected Files Handler,Serial,Long,false,ClientSigned,,43200,,,MP_SinvCollFile.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvcollfilemanagerconfig
MP_HinvEndpoint,{30297A13-1044-4E36-A87D-2171D2233946},MP Hardware Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Hinv.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_hinvmanagerconfig
MP_RelayEndpoint,{B80F30F1-AB53-4A86-8A32-770D8A418B99},MP Relay Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Relay.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_relaymanagerconfig
MP_LocationManager,{F21CCBF9-50A5-45E0-9B65-DF6C423E90F8},LocationManagerHandler Class,NoQueue,Long,false,All,,43200,,,MP_Location.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"
MP_TokenManager,{6FC37979-BF68-4B43-878F-CC5446E168BF},TokenManagerHandler Class,NoQueue,Long,false,ClientSigned,,43200,,,MP_Token.log,Conf
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = ConfigMgr Management Point Setup
Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): PolReqStagingDir.1114972D_590D_4AB6_BA2E_779928CEDCC2 = D:\SMS_CCM\PolReqStaging\
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
Property(S): CcmDefaultPolicyAuthority = SMS:MP:Default:{F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): MPVDirRoot.67022EC1_A401_46E9_91FC_2DF2ED04CF15 = D:\SMS_CCM\SMS_MP\
Property(S): Res1033.0EACD2EE_412B_4985_9727_96BC217AABD8 = D:\SMS_CCM\1033\
Property(S): Res1033.4CB41E5B_59DE_4D09_98C5_332377961F73 = D:\SMS_CCM\1033\
Property(S): MsiLogFileLocation = D:\SCCM_App\logs\mpMSI.log
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_App\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 6264
Property(S): VersionDatabase = 200
Property(S): MsiSystemRebootPending = 1
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 10257
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:50:23
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\274121.msi
Property(S): OriginalDatabase = D:\SCCM_App\bin\x64\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
Property(S): IISAnonymousUserAccount = IUSR
Property(S): ROOTDRIVE = G:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 74701392
Property(S): PrimaryVolumeSpaceRequired = 25840
Property(S): PrimaryVolumeSpaceRemaining = 74675552
Property(S): INSTALLLEVEL = 1
Property(S): CcmAdministratorsGroupName = Administrators
Property(S): CcmUsersGroupName = Users
Property(S): CcmCreatorOwnerAccountName = CREATOR OWNER
Property(S): PrimaryVolumePath = D:
Property(S): SOURCEDIR = D:\SCCM_App\bin\x64\
Property(S): SourcedirProduct = {F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): LASTSTATESERIALNUM = 0
Property(S): CCMHTTPSPORT = 443
Property(S): CCMHTTPSSTATE = 0
Property(S): CCMHTTPPORT = 80
Property(S): ProductToBeRegistered = 1
MSI (s) (18:A4) [13:50:23:792]: Note: 1: 1708
MSI (s) (18:A4) [13:50:23:792]: Product: ConfigMgr Management Point -- Installation operation failed.
MSI (s) (18:A4) [13:50:23:793]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (18:A4) [13:50:23:808]: Deferring clean up of packages/files, if any exist
MSI (s) (18:A4) [13:50:23:808]: MainEngineThread is returning 1603
MSI (s) (18:74) [13:50:23:814]: RESTART MANAGER: Session closed.
MSI (s) (18:74) [13:50:23:814]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 13:50:23 ===
MSI (s) (18:74) [13:50:23:820]: User policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Machine policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:822]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (18:74) [13:50:23:823]: Destroying RemoteAPI object.
MSI (s) (18:C0) [13:50:23:823]: Custom Action Manager thread ending.
MSI (c) (78:B4) [13:50:23:825]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:B4) [13:50:23:826]: MainEngineThread is returning 1603
=== Verbose logging stopped: 10/09/2014 13:50:23 ===MSI (c) (18:A8) [15:00:30:016]: Resetting cached policy values
MSI (c) (18:A8) [15:00:30:016]: Machine policy value 'Debug' is 0
MSI (c) (18:A8) [15:00:30:016]: ******* RunEngine:
******* Product: D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
******* Action:
******* CommandLine: **********
MSI (c) (18:A8) [15:00:30:016]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (18:A8) [15:00:33:018]: Failed to grab execution mutex. System error 258.
MSI (c) (18:A8) [15:00:33:027]: Cloaking enabled.
MSI (c) (18:A8) [15:00:33:027]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (18:A8) [15:00:33:031]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (18:A8) [15:00:33:033]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (18:A8) [15:00:33:034]: MainEngineThread is returning 1618
=== Verbose logging stopped: 10/09/2014 15:00:33 ===
MSI (s) (8C:A0) [15:19:09:082]: Hello, I'm your 64bit Elevated custom action server.
Action start 15:19:08: SkipInstallCA.
CustomAction SkipInstallCA returned actual error code 259 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:19:09: SkipInstallCA. Return value 5.
Action ended 15:19:09: INSTALL. Return value 1.
Property(S): ProductCode = {633F3A7E-471D-4C08-A643-C184A2EE19AB}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 6.10.1129.0
Property(S): ProductLanguage = 1033
Property(S): UpgradeCode = {5BBED1F8-E6F3-4A02-BC97-26D35BE200CA}
Property(S): ARPPRODUCTICON = ARPIco
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): DiskPrompt = [1]
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): InstallMode = Typical
Property(S): ErrorIcon = ErrorIco
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): SetupIcon = SetupIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ModifyIcon = ModifyIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): WelcomeBmp = WelcomeBmp
Property(S): ApplicationUsers = AllUsers
Property(S): Details = 0
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): _IsMaintenance2 = Modify
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): Interrupted = 0
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): MINIMUMOS = true
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ErrorDialog = ErrorDlg
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 603
Property(S): ARPHELPLINK =
http://go.microsoft.com/fwlink/?LinkId=52156
Property(S): SecureCustomProperties = NEWERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND2.0F33386E_8789_4165_9182_03203162EFEB
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): USERNAME = Windows User
Property(S): DialogTitleSetup = Setup
Property(S): DialogTitlePatch = Patch
Property(S): DialogTitleUpgrade = Upgrade
Property(S): Text_ArrowLeft = <
Property(S): Text_ArrowRight = >
Property(S): ButtonText_Next = Next
Property(S): ButtonText_Next_Hot = &Next
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Cancel_Hot = &Cancel
Property(S): ButtonText_Back = Back
Property(S): ButtonText_Back_Hot = &Back
Property(S): ButtonText_Finish = Finish
Property(S): ButtonText_Finish_Hot = &Finish
Property(S): ButtonText_Update = Update >
Property(S): ButtonText_Update_Hot = &Update >
Property(S): ButtonText_Ok = OK
Property(S): ButtonText_Ok_Hot = &OK
Property(S): ButtonText_Yes = Yes
Property(S): ButtonText_Yes_Hot = &Yes
Property(S): ButtonText_No = No
Property(S): ButtonText_No_Hot = &No
Property(S): ButtonText_Abort = Abort
Property(S): ButtonText_Abort_Hot = &Abort
Property(S): ButtonText_Ignore = Ignore
Property(S): ButtonText_Ignore_Hot = &Ignore
Property(S): ButtonText_Retry = Retry
Property(S): ButtonText_Retry_Hot = &Retry
Property(S): ButtonText_Change = Change...
Property(S): ButtonText_Change_Hot = &Change...
Property(S): ButtonText_Help = Help
Property(S): ButtonText_Help_Hot = &Help
Property(S): ButtonText_Install = Install
Property(S): ButtonText_Install_Hot = &Install
Property(S): ButtonText_Exit = Exit
Property(S): ButtonText_Exit_Hot = &Exit
Property(S): ButtonText_Remove = Remove
Property(S): ButtonText_Remove_Hot = &Remove
Property(S): ButtonText_Space = Space
Property(S): ButtonText_Space_Hot = &Space
Property(S): ButtonText_Browse = Browse...
Property(S): ButtonText_Browse_Hot = Bro&wse...
Property(S): ButtonText_DiskCost = Disk Cost...
Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
Property(S): LabelText_Status = Status
Property(S): LabelText_SerialNumber = &Serial Number:
Property(S): LabelText_UserName = &User Name
Property(S): LabelText_PersonName = Name
Property(S): LabelText_PersonOrganization = Company
Property(S): LabelText_InstallTo = Install to
Property(S): LabelText_Modify = &Modify
Property(S): LabelText_Repair = Re&pair
Property(S): LabelText_Remove = &Remove
Property(S): LabelText_Complete = &Complete
Property(S): LabelText_Custom = Cu&stom
Property(S): LabelText_NetworkLocation = &Network location:
Property(S): LabelText_LookIn = &Look in
Property(S): LabelText_FolderName = &Folder name
Property(S): LabelText_FeatureDescription = Feature description
Property(S): LabelText_CopyFilesFrom = Copy Files from
Property(S): LabelText_InstallFor = Install this application for
Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
Property(S): HeadText_WelcomePatch = Welcome to the Patch for
Property(S): HeadText_SetupWelcome = Welcome to the
Property(S): HeadText_SetupWelcome2 = Setup
Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
Property(S): HeadText_SetupInterrupted = Setup Interrupted
Property(S): HeadText_LicenseAgreement = License Agreement
Property(S): HeadText_FeatureSelection = Feature Selection
Property(S): HeadText_NetworkLocation = Network Location
Property(S): HeadText_ProgramMaintenance = Program Maintenance
Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
Property(S): HeadText_FilesInUse = Files in Use
Property(S): HeadText_DatabaseFolder = Database Folder
Property(S): HeadText_RegistrationInformation = Registration Information
Property(S): HeadText_CompletingSetup = Completing the
Property(S): HeadText_CompletingSetup2 = Setup
Property(S): HeadText_InstallingProduct = Installing
Property(S): HeadText_UninstallProduct = Uninstalling
Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
Property(S): HeadText_ReadyInstall = Ready to Install the Program
Property(S): HeadText_ReadyRepair = Ready to Repair the Program
Property(S): HeadText_ReadyModify = Ready to Modify the Program
Property(S): HeadText_RemoveProgram = Remove the Program
Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
Property(S): DescText_ServerImage = Setup will create a server image of
Property(S): DescText_ServerImage2 = at a specified network location. To continue, click Next.
Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
Property(S): DescText_PatchInstall2 = on your computer. To continue, click Update.
Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
Property(S): DescText_WizardComplete2 = on your computer. To continue, click Next.
Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
Property(S): DescText_CompleteSuspended2 = on your computer. To continue, click Next.
Property(S): DescText_SuccessfulInstallation = Setup has installed
Property(S): DescText_SuccessfulInstallation2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRemove = Setup has removed
Property(S): DescText_SuccessfulRemove2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRepair = Setup has repaired
Property(S): DescText_SuccessfulRepair2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulModify = Setup has modified
Property(S): DescText_SuccessfulModify2 = successfully. Click Finish to exit.
Property(S): DescText_SetupInterrupted = Setup was interrupted before
Property(S): DescText_SetupInterrupted2 = could be completely installed.
Property(S): DescText_PreparingSetup = Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
Property(S): DescText_FeatureSelection = Select the program features you want installed.
Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
Property(S): DescText_BrowseDestination = Browse to the destination folder.
Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
Property(S): Text_FinishExit = Click Finish to exit Setup.
Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
Property(S): Text_InstallWait = Please wait while the Install Wizard installs
Property(S): Text_InstallWait2 = . This may take several minutes.
Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWaitText2 = . This may take several minutes.
Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWait2 = . This may take several minutes.
Property(S): Text_ProgressDone = Progress done
Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
Property(S): Text_BeginInstallation = Click Install to begin the installation.
Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
Property(S): Text_EnterNetworkLocation2 = at the specified network location or click Cancel to exit Setup.
Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
destination drives.
Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
Property(S): Text_RemoveFromComputer = Remove
Property(S): Text_RemoveFromComputer2 = from your computer.
Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): Text_ClickRemove = Click Remove to remove
Property(S): Text_ClickRemove2 = from your computer. After removal, this program will no longer be available for use.
Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
Property(S): Text_OnlyMe = Only for &me ([USERNAME])
Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): ShortCutText = MSXML 6.0
Property(S): DialogTitle = MSXML 6.0 Parser Setup
Property(S): ProductName = MSXML 6.0 Parser
Property(S): ShortName = MSXML 6.0 Parser
Property(S): WrongPackage = This MSXML6.0 package is not supported on the current processor type.
Property(S): DialogPatchTitle = MSXML 6.0 Parser Patch
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): System64Folder = C:\Windows\system32\
Property(S): MsiLogFileLocation = D:\SCCM_ap\logs\msxml6_x64MSI.log
Property(S): PackageCode = {6A3B8AE9-3F13-4302-A5AE-C51A0BA1592E}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_ap\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 5220
Property(S): MsiRestartManagerSessionKey = 0feb3f07a88fb247a0f339814320aad0
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 12166
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:19:09
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\edbb.msi
Property(S): OriginalDatabase = D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (8C:A8) [15:19:09:199]: Note: 1: 1707
MSI (s) (8C:A8) [15:19:09:199]: Product: MSXML 6.0 Parser -- Installation completed successfully.
MSI (s) (8C:A8) [15:19:09:200]: Windows Installer installed the product. Product Name: MSXML 6.0 Parser. Product Version: 6.10.1129.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MSI (s) (8C:A8) [15:19:09:208]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:A8) [15:19:09:208]: MainEngineThread is returning 0
MSI (s) (8C:94) [15:19:09:213]: RESTART MANAGER: Session closed.
MSI (s) (8C:94) [15:19:09:213]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 15:19:09 ===
MSI (s) (8C:94) [15:19:09:214]: User policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:216]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:94) [15:19:09:217]: Destroying RemoteAPI object.
MSI (s) (8C:C4) [15:19:09:217]: Custom Action Manager thread ending.
MSI (c) (64:7C) [15:19:09:218]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (64:7C) [15:19:09:219]: MainEngineThread is returning 0
=== Verbose logging stopped: 10/09/2014 15:19:09 === -
Access Denied Error:5 Adding Package to .WIM with DISM
I am trying to add .CAB packages to a custom .wim file. I am able to mount the image, but upon trying to add .cab packages to the image, it gives me an error like:
An error occurred - Package_for_KB2588516 Error: 0x80070005
Error: 5
Access is denied.
Here is a segment of the DISM.log. I can post the full Logfile if needed. I am running the command prompt with elevated privileges.
2012-02-10 11:58:45, Info CBS Failed to delete registry value: LastProgressState [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete store object value named: LastProgressState [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete registry value: LastError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete store object value named: LastError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete registry value: ExtendedError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete store object value named: ExtendedError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to persist status for package: Package_for_KB2588516~31bf3856ad364e35~x86~~6.1.1.1 [HRESULT = 0x80070005
- E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete registry value: ExtendedError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete store object value named: ExtendedError [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to query sources for package: Package_for_KB2588516~31bf3856ad364e35~x86~~6.1.1.1 [HRESULT = 0x80070005
- E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to persist package: Package_for_KB2588516~31bf3856ad364e35~x86~~6.1.1.1. [HRESULT = 0x80070005 -
E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete registry value: LastProgressState [HRESULT = 0x80070005 - E_ACCESSDENIED]
2012-02-10 11:58:45, Info CBS Failed to delete store object value named: LastProgressState [HRESULT = 0x80070005 - E_ACCESSDENIED]Hi,
If you plan on using DISM to install a .cab file, it is recommended that you use the WUSA.exe tool to extract the files to a directory first.
Make sure that the permission setting of the temp folder that save the mounted image allows the user to modify.
Make sure that you run the command lines in a prompt window with Administrator privilege.
If the issue persists, you’d better consider to change with another image.
The following operating-system-package servicing options are available for a mounted offline image:
DISM.exe /image:<path_to_mounted_image_directory> [/Get-Packages | /Get-PackageInfo | /Add-Package | /Remove-Package ] [/Get-Features | /Get- FeatureInfo | /Enable-Feature | /Disable-Feature ]
The following operating system package servicing options are available for a running operating system:
DISM.exe /online [/Get-Packages | /Get-PackageInfo | /Add-Package | /Remove-Package ] [/Get-Features | /Get-FeatureInfo | /Enable-Feature | /Disable- Feature ]
Pay attention to the following please.
1. You cannot use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory used for extracting files for temporary usage during servicing must be a local directory.
2. If subsequent actions are requested, they cannot be processed until the previous pending online action is completed.
3. If a package is in the “installed requested” state and then you stage the package, the package state is set to “uninstall requested”. This is because it must be uninstalled before it can be staged.
4. Some packages require other packages to be installed first. Because of this dependency requirement, you should use an answer file if you are installing multiple packages.
Hope that helps. -
Data Pump Error - ORA-04063: package body "SYS.DBMS_INTERNAL_LOGSTDBY" has
Hi All,
I am getting the following errors when I am trying to connect with datapump.My db is 10g and os is linux.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-31626: job does not exist
ORA-04063: package body "SYS.DBMS_INTERNAL_LOGSTDBY" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 24
ORA-06512: at "SYS.KUPV$FT", line 676
ORA-04063: package body "SYS.DBMS_INTERNAL_LOGSTDBY" has errors
ORA-06508: PL/SQL: could not find program unit being called
When I tried to compile this package I am getting the following error
SQL> alter package DBMS_INTERNAL_LOGSTDBY compile body;
Warning: Package Body altered with compilation errors.
SQL> show error
Errors for PACKAGE BODY DBMS_INTERNAL_LOGSTDBY:
LINE/COL ERROR
1405/4 PL/SQL: SQL Statement ignored
1412/38 PL/SQL: ORA-00904: "SQLTEXT": invalid identifier
1486/4 PL/SQL: SQL Statement ignored
1564/7 PL/SQL: ORA-00904: "DBID": invalid identifier
1751/2 PL/SQL: SQL Statement ignored
1870/7 PL/SQL: ORA-00904: "DBID": invalid identifier
Can anyony suggest/guide me how to resolve the issue.
Thanks in advanceSQL> SELECT OBJECT_TYPE,OBJECT_NAME FROM DBA_OBJECTS
2 WHERE OWNER='SYS' AND STATUS<>'VALID';
OBJECT_TYPE OBJECT_NAME
VIEW DBA_COMMON_AUDIT_TRAIL
PACKAGE BODY DBMS_INTERNAL_LOGSTDBY
PACKAGE BODY DBMS_REGISTRY_SYS
Thanks -
[SOLVED] Strange error while compiling packages via AUR
I've been facing this error while compiling packages via AUR. I'm also posting the output of my /etc/makepkg.conf
Error
==> Starting build()...
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether cc supports -O2... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GSTREAMER... yes
checking for GSTREAMER_GTK... yes
checking for XOpenDisplay in -lX11... yes
checking for ncursesw5-config... /usr/bin/ncursesw5-config
checking for initscr in -lncurses... yes
checking whether gcc supports -Wall... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating docs/Makefile
config.status: creating config.h
config.status: executing depfiles commands
fatal: Not a git repository (or any of the parent directories): .git
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /tmp/yaourt-tmp-hellknight/aur-gst123/src/gst123-0.2.0/build-aux/missing --run aclocal-1.11 -Wno-portability
sh: autom4te: command not found
aclocal-1.11: autom4te failed with exit status: 127
make: *** [aclocal.m4] Error 1
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build gst123.
==> Restart building gst123 ? [y/N]
==> -------------------------------
==>
/etc/makepkg.conf
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=amdfam10 -mtune=generic -O2 -pipe"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j8"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color !ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Directories to be searched for the strip option (if strip is specified)
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by tarun.hellknight (2011-04-12 15:45:26)That's strange... it wasn't installed.. although I had never,ever faced a problem while compiling packages via AUR.. maybe, I should be careful when uninstalling orphans.. thanks for the help..
-
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
BUG: Warning/Error just refreshing page several times???
Hi!
I made a simple page:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document>
<af:messages/>
<af:form>
<af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx">
<f:facet name="center">
<af:panelGroupLayout layout="vertical">
<af:subform>
<dvt:graph graphType="LINE_VERT_ABS"
dynamicResize="DYNAMIC_SIZE"
value="#{bindings.SampleGraphDataRow.graphModel}"/>
<af:commandButton text="commandButton 1"/>
</af:subform>
</af:panelGroupLayout>
</f:facet>
<f:facet name="header"/>
<f:facet name="end"/>
<f:facet name="start"/>
<f:facet name="branding"/>
<f:facet name="copyright"/>
<f:facet name="status"/>
</af:pageTemplate>
</af:form>
</af:document>
</f:view>
</jsp:root>First time I get a page without any problems (expect standard "WARNING: Header modification request was rejected. Because the setter method was called from included servlet. It is restricted by SRV.8.3 of Servlet Specification 2.4. : current-workspace-app" I'm getting with every single page).
Then I was just refreshing this page a few times (clicking a refresh button in browser, without doing anything else in page – so no PPRs, actions etc. – so no client events should be produced by my acting beside page refresh).
After several refreshes, strange WARNING (looking more like error than just warning) appeared in log window:
WARNING: empty String
java.lang.NumberFormatException: empty String
at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
at java.lang.Double.parseDouble(Double.java:510)
at java.text.DigitList.getDouble(DigitList.java:151)
at java.text.DecimalFormat.parse(DecimalFormat.java:1303)
at java.text.SimpleDateFormat.subParse(SimpleDateFormat.java:1918)
at java.text.SimpleDateFormat.parse(SimpleDateFormat.java:1264)
at java.text.DateFormat.parse(DateFormat.java:335)
at com.evermind.server.http.EvermindHttpServletRequest.getDateHeader(EvermindHttpServletRequest.java:1581)
at com.evermind.server.http.EvermindHttpServletRequest.getDateHeader(EvermindHttpServletRequest.java:1379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.myfaces.trinidad.webapp.ResourceServlet.service(ResourceServlet.java:162)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:118)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.security.jazn.oc4j.JAZNFilter$3.run(JAZNFilter.java:434)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:308)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:452)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:583)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
May 11, 2008 8:16:21 PM com.evermind.server.ServerBase log
WARNING: Application1-ViewController-webapp: Servlet error
oracle.security.jazn.JAZNRuntimeException: empty String
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:480)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:583)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NumberFormatException: empty String
at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
Why is this happening? The page renders (apparently) normally, the graph renders as it should, but I'm not sure if the page is going to work correctly because of this warning/error.
I'm using TP4 on Vista x86, with JDK 1.6u5.
Anyone, please take a look at this. It may be a bug somewhere...
Regards,
PaKoPako,
the message "java.lang.NumberFormatException: empty String" points to a missing data value. I'll file a bug and ask QA to verify this.
Frank -
COST ALLOCATION LOGIG.LGF
*XDIM_MEMBERSET TIME=2008.JAN,2009.JAN
*XDIM_MEMBERSET P_ACCT=COST
*XDIM_MEMBERSET CATEGORY=PLAN,ACTUAL
*XDIM_MEMBERSET P_CC=$SOURCE$,$TARGET$,
*WHEN P_CC
*IS "EUROPE"
*REC(EXPRESSION=$E_TOTALCOST$,TIME=2009.JAN,CATEGORY=PLAN)
*ENDWHEN
*COMMIT
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=COST; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM P_CC WHAT=$SOURCE$; WHERE=$TARGET$; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=>>>; WHERE=2009.JAN; USING=2008.JAN; TOTAL=<<<
*DIM CATEGORY WHAT=>>>; WHERE=PLAN; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
*WHEN P_CC
"IS "EUROPE"
REC(EXPRESSION=0,TIME=2009.JAN)
*ENDWHEN
DATAMANAGER PACKAGE
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
PROMPT(TEXT, %E_TOTALCOST%,"How much do u want to allocate ?",)
PROMPT(TEXT, %SOURCE%,"Enter Source Entity",)
PROMPT(TEXT, %TARGET%,"Enter Target Entities",)
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(/CPMB/ALLOCATION_LOGIC,TAB,%TAB%)
TASK(/CPMB/ALLOCATION_LOGIC,EQU,%EQU%)
TASK(/CPMB/ALLOCATION_LOGIC,SUSER,%USER%)
TASK(/CPMB/ALLOCATION_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/ALLOCATION_LOGIC,SAPP,%APP%)
TASK(/CPMB/ALLOCATION_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/ALLOCATION_LOGIC,LOGICFILENAME,ALLOCATION.LGF)
TASK(/CPMB/ALLOCATION_LOGIC,REPLACEPARAM,E_TOTALCOST%EQU%%E_TOTALCOST%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
Allocation Package Name : Cost_allocation
i am getting error :
E_TOTALCOST=100000
SOURCE=EUROPE
TARGET=FRANCE;ITALY;GERMANY
(MEMBER SELECTION)
CATEGORY: aCTUAL,PLAN
RPTCURRENCY:LC
TIME:2008.JAN,2009.JAN
[MESSAGES]
Error found in BPC
Application: PLANNING Package status: SUCCESS
Package status is successful but allocation is not done .....Hi,
Is EUROPE a node or a base member in P_CC Dimension?
Also, can you try commenting out the last WHEN/ENDWHEN. The problem could be that RUNALLOCATION discards all XDIMs hence your second WHEN/ENDWHEN runs on the whole Application.
If this doesn't help, can you try running it in t/a UJKT replacing all $...$ with values and provide log for allocations?
Regards,
Gersh -
Error executing SSIS packages from Agent
Hi All,
I designed SSIS package that loads data from Oracle table to SQl server table along with loading data into Diension and fact tables using SSIS packages only. First I created all SSIS packages that loads data into Staging tables from
Oracle table in next level loading data into Dimension table and final level is loading data into Fact table. At lasts I created One master package there I'm calling all packages (Execute package task) differently.
Configuration type: Parent package configuration for All child packages. XML config for parent package.
When I execute SSIS package from BIDS data is loading up to Fact table. When I execute SSIS packages through Sql server agent ( Using File System Deployment)When I execute SSIS package from Sql server agent it is throwing an error message like
Message
Executed as user: . Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 10:45:10 PM Error: 2013-10-17 22:45:12.60
Code: 0xC00220E6 Source: Master Data Description: There is no project to reference. End Error Error: 2013-10-17 22:45:12.61 Code: 0xC0024107 Source:
Master Data Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:45:10 PM Finished: 10:45:13 PM Elapsed:
2.59 seconds. The package execution failed. The step failed.
I'm uploaded config file also while at the time of scheduling job.
Regards,
Praveen
Regards, PraveenHi Praveen,
The issue may occur if the SQL Server Agent Service Account or Proxy account doesn’t have sufficient permissions. Please create a SQL Server Agent Proxy account that has the permissions to execute the package and perform update operations on the SQL Server
fact tables.
Reference:
http://technet.microsoft.com/en-us/library/ms175834.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error occurred while packaging application
I make a ANE,and want run app with ios simulator. but I always get the error, anyone can help me ? think you
我做了个ANE的包，但我想用模拟器运行时，老提示下面的错误，ane中有使用到的framework有：
MessageUI.framework，CoreText.framework等
谁能帮我，谢谢！
Error occurred while packaging the application:
ld: warning: could not create compact unwind for __Unwind_Resume: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_ForcedUnwind: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_RaiseException: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_Resume_or_Rethrow: non-standard register 0 being saved in prologI make a ANE,and want run app with ios simulator. but I always get the error, anyone can help me ? think you
我做了个ANE的包，但我想用模拟器运行时，老提示下面的错误，ane中有使用到的framework有：
MessageUI.framework，CoreText.framework等
谁能帮我，谢谢！
Error occurred while packaging the application:
ld: warning: could not create compact unwind for __Unwind_Resume: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_ForcedUnwind: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_RaiseException: non-standard register 0 being saved in prolog
ld: warning: could not create compact unwind for __Unwind_Resume_or_Rethrow: non-standard register 0 being saved in prolog -
Custom aggregate function inside a package.
Hi there,
I'm trying to write a custom aggregate function and group that function inside a package together with some other functions that I have. As an example (to simulate the problem I have) suppose my custom aggregation to do a summation of numbers looks like:
CREATE OR REPLACE TYPE SUM_AGGREGATOR_TYPE AS OBJECT (
summation NUMBER,
STATIC FUNCTION ODCIAggregateInitialize(agg_context IN OUT
SUM_AGGREGATOR_TYPE) RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT SUM_AGGREGATOR_TYPE,
next_number IN NUMBER) RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT SUM_AGGREGATOR_TYPE,
para_context IN SUM_AGGREGATOR_TYPE) RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN SUM_AGGREGATOR_TYPE,
return_value OUT NUMBER, flags IN NUMBER) RETURN NUMBER
CREATE OR REPLACE TYPE BODY SUM_AGGREGATOR_TYPE IS
STATIC FUNCTION ODCIAggregateInitialize(agg_context IN OUT
SUM_AGGREGATOR_TYPE)
RETURN NUMBER IS
BEGIN
agg_context := SUM_AGGREGATOR_TYPE(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT SUM_AGGREGATOR_TYPE,
next_number IN NUMBER)
RETURN NUMBER IS
BEGIN
IF self.summation IS NULL THEN
self.summation := next_number;
ELSIF summation IS NOT NULL THEN
self.summation := self.summation + next_number;
END IF;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT SUM_AGGREGATOR_TYPE,
para_context IN SUM_AGGREGATOR_TYPE)
RETURN NUMBER IS
BEGIN
self.summation := self.summation + para_context.summation;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN SUM_AGGREGATOR_TYPE,
return_value OUT NUMBER, flags IN NUMBER)
RETURN NUMBER IS
BEGIN
return_value := self.summation;
return ODCIConst.Success;
END;
END;
If I write the following function definition:
CREATE OR REPLACE FUNCTION MY_SUM(input NUMBER)
RETURN NUMBER PARALLEL_ENABLE AGGREGATE USING SUM_AGGREGATOR_TYPE;
and corresponding type declaration to test:
CREATE OR REPLACE TYPE VECTOR
IS
TABLE OF NUMBER;
this statement:
select my_sum(column_value) from table(vector(1, 2, 1, 45, 22, -1));
gives the correct result of 70. However, creating a package with the function definition:
CREATE OR REPLACE PACKAGE MY_FUNCTIONS AS
FUNCTION MY_SUM(input NUMBER)
RETURN NUMBER PARALLEL_ENABLE AGGREGATE USING SUM_AGGREGATOR_TYPE;
END;
and calling it via:
select MY_FUNCTIONS.my_sum(column_value) from table(vector(1, 2, 1, 45, 22, -1));
explodes with:
ORA-00600: internal error code, arguments: [17090], [], [], [], [], [], [], [], [], [], [], []
Is it possible to have custom aggregate functions nested inside package declarations?
I'm using Oracle 11g, Release 2 (11.2.0.1.0).HiddenName wrote:
Is it possible to have custom aggregate functions nested inside package declarations?Yes, it is possible, you have succesfuly created your function. Your problem is that the database throws ORA-600 on execute. And with ORA-600 you can do 2 things: 1) google ORA-600 17090 or 2) contact your Oracle Support.
You could also try to declare the function without PARALLEL_ENABLE - just to try to see if it changes anything. You can also try to call your function against a regular table with rows and columns - not against an collection type with table() operator.
Anyway - these 2 tests should be usefull for Oracle Support.
I never tried to put a custom aggregate function into a package. First - the cases when you need a custom aggregate function to be written for your system are very rare. Second - even if I needed 1 then I never needed 2 or more custom aggregate functions on my system. And as I do not like to make my life more complex than necessary, I have created it as a stand-alone function. And it is works (slowly).I tried using a standard table as you suggested:
CREATE TABLE TEST_DATA
test_value NUMBER
INSERT INTO TEST_DATA
(SELECT column_value test_value from TABLE(vector(1, 2, 1, 45, 22, -1)));
COMMIT;
select my_sum(test_value) from test_data;
select my_functions.my_sum(test_value) from test_data;
I also tried removing the PARALLEL_ENABLE clause to create the package as follows:
CREATE OR REPLACE PACKAGE MY_FUNCTIONS AS
FUNCTION MY_SUM(input NUMBER)
RETURN NUMBER AGGREGATE USING SUM_AGGREGATOR_TYPE;
END;
And unfortunately it still breaks with the following error: SQL Error: ORA-00600: internal error code, arguments: [17090]. This looks like an Oracle bug to me as the PL/SQL parsing engine should have disallowed me to even create this if it is not supported in Oracle. Instead, it allows me to create the package, and breaks when I call the function with this weird error (additionally cutting my connection from the database) instead of disallowing me to do this altogether and printing a nice error message telling me that Oracle doesn't support this. How would I go about logging a ticket for this?
Edited by: wcmatthysen on Dec 1, 2010 12:51 PM -
Dear ALL,
When invoice has been sent to the customer I come across the above error status the description of the error is as follows.
"Trading Partner Not Found in TP XRef Database"
for this please advice me where to check
TIA,
KOGIUse transaction WE20 to check on the Trading Partners and the Outbound paramaters of the current TP.
If the trading partner is found then check that message type INVOIC is setup for the TP.
Thanks,
Maybe you are looking for
-
BI-IP: Change of characteristic value in ABAP EXIT planning function
Hi I have created a planning function of the type EXIT with reference data without blocks. In method IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE I am going to implement my code. Now, one of the purposes is to update the VALIDTO of an existing record. Is i
-
I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection
I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem. Can I download iPod nano 6th gen firmware 1.2 update file without using iTune? I want to offline update
-
OK here is what I heard: at a recent music pro's meet up I heard that 2 different people report some version of the info below. Then I called a mac tech pro, and he added 3 experiences more of the same in the last year. So this seems scary and that S
-
For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying "This backup is too large for the backup disk. The backup requires 345.74GB but on
-
Im using a Macbook Pro, running a Mac OS 10.6.8, with 400GB free of space and it is running slow. It takes more than 15 minutes to start up and things like that. I cant seem to do anything as it is so slow. The 'beachball of death' is also present d