Customer account creation (FD01)

When I try to create Customer account I am getting the following error message.
"Entry DB01 0000200050 does not exist in SKB1 - Check your entry"
DB01 is my company code. Can anyone tell me how to resolve this issue.
Thanks for your help.

Hi,
My understanding of your problem is as folows:
Table SKB1 is GL account master for Company code
You are creating customer by giving the reconciliation account 200050. This account you have created at the Chart of accounts level but you may not have extended this to company code level.(that is the account is incomplete,it has been created at the Chart of accounts level but not at the Company code level)
Also checkout that you have assigned the Field status group G067 for the GL account.
Use T.code FSP1/FS00 to complete this GL account i.e, extend this to your company code DB01 and try saving again the customer master.
Hope it resolves your problem
Regards
Aravind
PLEASE DO ASSIGN POINTS IF USEFUL

Similar Messages

Business Partner Creation ( Master Tenant with Customer Account)

Hello Experts
Am trying to create a master tenant with a customer account, but as i save the business partner there is no corresponding creation of the master tenant with a customer account in the company code. The system only generates a business partner created. I have cheked the settings on business partner customer and have the correct FI custmer acount to the business partner, have also checked settings on the assignment of the reconciliation account to the BP and again it is compatible with the customer reconciliation account in Financials. I have also the synchronization data to see whether the synchronization object is activated, and it was not activated and i activated it, but still am not able to create a master tenant with customer account.
Please Experts help me on this am very very stranded
Regards
David Mavi

Hi David,
Following activities are to be done to create customer simultaneously while the creation of business partner.
Business Partner Number Range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Business Partner Number Range
Define Grouping and number range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Define Groupings and Assign Number Ranges
Also make sure that the customer account group is created with a number range which should be external. The number range for the business partner should be internal.
Master Data syncronization: IMG>Cross Application Components>Master Data Synchronization>Customer/Vendor Integration>Business Partner Settings>Settings for Customer Integration>Field Assignment for Customer Integration>Assign Keys>Define Number Assignment for Direction of BP to Customer
In the settings select the same number range only if the number ranges for the customer account group and BP groups are the same.
If u have done all these things and still the customer is not getting created then there might be a problem of the mandatory fields. i.e may be in customer account group some fields are mandatory which are not getting copied from the BP. So make all the fields in the customer account group as optional. and try to create new BP again.
Regards,
Deepak M

Account Group - Creation of Customer Account

Hi Gurus,
I am having a doubt over the Customer account group.
We have created 8 Customer account group as well in FI.
In IS-H module, we created 2 Customer account group ( Namely,Inpatient and Outpatient)
But as per FI they need to deduct diff payment terms ,dunninig letter,and taxes are deducting under these 8 groups are in FI.
How can we adjust all the 8 groups in FI under the 2 Groups in ISH.?
Can any one gide me?
Thanks.
Bala

2 Process & Configuration
2.1 Customer Master
2.1.1 Account Group
2.1.1.1 Maintain Number Range for Account Group
Use
The purpose of this activity is to control number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New) --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for Creating Customer Master Data --> Create Number Ranges for Customer Accounts --> Select the Icon to maintain Number Range
Transaction Code: SPRO
Data to be maintained:
No | From | To | Current No | Ext (Tick in Check Box)
01 | 0000000001 | 0000099999 | 0 | No
02 | 0000100000 | 0000299999 | 0 | No
XX | A | ZZZZZZZZZZ | Yes
2.1.1.2 Assign Number Range to Account Group
Use
The purpose of this activity is to maintain number range of Account Group.
Procedure
Access the activity using one of the following navigation options:
IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Assign Number Ranges to Customer Account Groups
Transaction Code : SPRO
Data to be maintained:
Group | Name | Number Range
0001 | Sold-to party | XX
0002 | Goods recipient | XX
0003 | Payer | XX
0004 | Bill-to party | XX
2.1.1.3 Define Account Groups with Screen Layout (Customers)
Use
In this step, you determine the account group of the customer.
Procedure
Access the activity using one of the following navigation options:
IMG > Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Master Data > Preparations for Creating Customer Master Data > Define Account Groups with Screen Layout (Customers)
Transaction Code : SPRO
The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
Group | Name
0001 | Sold-to party
0002 | Goods recipient
0003 | Payer
0004 | Bill-to party
0005 | Prospective customer
0006 | Competitor
Select Sold-to-party > go to Details > Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
Regards,
Rajesh Banka

Creation part of Customer Account Group

hi...
When we have going to create customer account group why we have to start with Y & Z why dont we start with numbers, can any one explain plz...
Regards.
Santosh

Hi
We use a prefix of Y or Z only when we are defining our own object like sales doc. or item category likewise account group.
they will not be overwritten while upgrading the system also sap recommends to use Z for modifications done in a standard program. Copying the standard one and naming it with Z.
regards
Prashanth

Creation of Customer Accounting from Billing

Hi Gurus,
I have a slightly complicated problem that I request your help with.
In standard SAP functionality if we bill different services (e.g. S1, S2, S3) in one invoice (I1), in the customer account this invoice is reflected as I1 and the net value.
e.g.
Invoice Details : I1
S1 : 10 INR
S2 : 20 INR
S3 : 30 INR
Entry in Customer Account
Item 1 : I1 : 60 INR
However due to certain business requirements, we need the invoice to update the customer account as shown below.
Item 1 : I1 : 10 INR
Item 2 : I1 : 20 INR
Item 3 : I1 : 30 INR
We necessarily need to create one single invoice, else the simplest way is to either bill services seperately or set invoice splitting rules.
We explored the possibility of using exits (e.g. EXIT_SAPLV60B_010) , but none of the exits are able to fit into the required scenario.
Any help is appreciated and will be rewarded.
Thanks a ton!

Hi Pranav - this is standard sap attribute - Debit Customer once and credit sales and other gl accounts as per pricing procedure - multiple entries for customer debit is not possible for same billing document
cheers
nandu

Create Costumer & Account creation, enterprise Services

Hi guys!
I'm searching for Enterprises Services that resembles to the TX codes: FD01 (Cosutmer Creation) and F-36 (Account Creation). I want to use an existing enterprise service insted of developing an interface where I can Create a Costumer (tx FD01) and to create an Account (Tx F-36).
Can you please advise me where to find it?
Thank you!!
Felipe

Hi,
I found following service in CRM: Customer Business Object [http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=39F47C2060B211DA36BB000F20DAC9EF&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=]
You can search for services in ES workplace and review fileds to see if those services are suitable for you.
Regards,
Gourav

Problem in customer master creation using BAPI_CUSTOMER_CREATEFROMDATA1

Hi Guru's...
i am unable to go forward...
can you please help me out in this customer master creation....
what are the fileds i am using while creating in XD01 (account group,name,country)then i am able create and the customer number is autogenerated.
using same field values i am trying to test the BAPI initially but i am unable to execute the BAPI BAPI_CUSTOMER_CREATEFORMDATA1.
in this one draw back is when compare to the XD01 peocess is account group.
account group is mandataory in XD01 process and in BAPI test there i sno field for giving this account group field value.....may be this is one reason....(if it is mandatory where i have to provide in BAPI test..)
and i tried in BAPI test using customer reference ID also....
please guide me....
please let me know if my question is not clear...
Thanks in advance
Srinivas...

thanks rajani ur valuble reply..
but i am looking for creating at a time 'n' number of customer's using BAPI (the coustomers data will be in flat file in presentation server....)
please advise me ..
let me know if my question is not clear...
thanks in advance
srinivas....

Customer Master creation

Hi,
I have to create customers, but not sure if i should use FD01 or XD01. We are not using the SD module, so does it make any difference about using either of the t-codes.
And do we HAVE to create customers centrally first ( without assigning to any company code ) and then create them for the required company codes or we should create them directly for company codes
Thanks.

hi,
-if you don't have SD, you can forget XD01, just use FD01
-you cannot create general data only, you have to create either with company code (FD01) or with sales area data (XD01). You don't have SD (Question #1), so you create with company code (FD01).
These are the transaction codes you can use for customer creation:
FD01: General data + Company Code data
VD01: General data + Sales area data
XD01: General data + Company Code data + Sales area data
hope this helps
ec

Send Email on User Account Creation in OIM 11g

Hi All,
We are working on email notifications for the user account creation. we followed the following procedure:
1) Creation of email template
2) Creation of resource object
3) Creation of notification process
4) Create Customer Rule
5) Create Customers Role and Assign Rule
6) Create Access Policy.
After assigning AD account to the user we are getting following errors..
1> Class/Method: tcEmailNotificationUtil/parseEmail encounter some problems: Data Access Error
Supplemental Detail com.thortech.xl.dataaccess.tcDataSetException: Data Access Error
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(tcDataSet.java:952)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(tcDataSet.java:1523)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(tcDataSet.java:903)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(tcDataSet.java:1490)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.parseEmail(tcEmailNotificationUtil.java:1213)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.constructEmail(tcEmailNotificationUtil.java:235)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.constructEmail(tcEmailNotificationUtil.java:269)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(tcScheduleItem.java:3765)
2> *Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: [EOF]*
Supplemental Detail javax.mail.MessagingException: [EOF]
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1481)
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1512)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1054)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:634)
at javax.mail.Transport.send0(Transport.java:189)
at javax.mail.Transport.send(Transport.java:118)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(tcEmailNotificationUtil.java:850)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(tcScheduleItem.java:3782)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(tcScheduleItem.java:741)
3) And I am also getting error related to FAX like..
select Fax from orc orc, usr usr where usr.usr_key=orc.usr_key and orc.orc_key =293
Supplemental Detail java.sql.SQLSyntaxErrorException: ORA-00904: "FAX": invalid identifier
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:95)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:193)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:856)
4) Class/Method: tcDataBase/readPartialStatement encounter some problems: ORA-00904: "FAX": invalid identifier
Supplemental Detail java.sql.SQLSyntaxErrorException: ORA-00904: "FAX": invalid identifier
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:95)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:193)
Plaese provide quick resolution to our issue..
It will be very helpful to us.
Thanks

Thanks alot.I have configured this requirement.
Regards
A Abhinay

Automatic customer account determination for EBS

Dear all,
I'm configuring Electronic Bank Statement. Could you please explain, how can I setup automatic customer account determination for incoming receipts? Based on what information these accounts should be determined? Where to configure it?
Thanks in advance.

Hi,
If your configuration is correct, an accounting document will get created during invoice creation even if the value is zero. Acct doc is created not based on the value, but based on the account key to which the condition type is linked.
Generally in free goods, there will be net price (gross price- discounts). You can link this netprice condition type to an account key. The netprice will anyway be nullified by NB00 condition type which is applicable for free goods pricing. You can also link NB00 to another account key.
Now the values will nullify each other in invoice. Similarly the values will be nullified in accountnig doc also and they can be posted to any GL account you wish.

How to attach a Contact at Customer Account Level.

Hi All,
I want to know how to attach a contact at customer Account Level. Please let us know the API for the same.
Or share some sample code if any.
Thanks in advance.

Hi,
Are you using R11 or R12?
Well i have an API that i used in R11 for the creation of contacts:
hz_party_contact_v2pub.create_org_contact
hz_contact_point_v2pub.create_contact_point
Hope this helps you..
Vik

Defaulting Language in Address of Account Creation Page by Configuration

Hi,
We have a requirement where in we need to Default the Language field to EN in the Address Details of the BP in the Account Creation Page.
Technically, this can be achieved either by implementing the BADI or SET method of the attributes.
Can anyone please let us know, if this can be achieved by any Configuration step rather than drilling down till the technical level.
Thanks in Advance!
Regards
Veena Nadipalli

Veena,
This is not a standard possibility in configuration.
What you could do is indeed enhance the view to[ retrieve the default values and set them|http://blog.acorel.nl/2010/09/adding-default-values-to-search-screen.html].
If you want to differ the value for instance based on the business role, you can use the [parameters |http://blog.acorel.nl/2011/06/usage-of-custom-businessrole-parameters.html] that can be added to the businessrole.
Hope this helps.
Regards,
Pieter Rijlaarsdam

Assigning multiple FI Customer accounts to the same BP

We have a requirement to assign multiple FI customer accounts to the
same Business Partner in ECC 5.0.
When we try to do this, we get the error message:
Business partner &&& is already assigned to FI customer &&&
Message no. FLBP124
Is this possible, or is this a system limitation?
Many thanks
Tom

Hi,
Check the "Automatic creation of Business Partner in FSCM" message. You have to create BP to synchro with customer and customer to BP.
To synchro personal data, you have to run MDS_LOAD_COCKPIT program.
JPA

How to view List of Customer Account Groups

T-Code OBD2 to create a new Customer Account Group.
To avoid using an existing name, i would like to have an idea about the current existing Group names .
What is the T-Code to view that list ?

Hi Mr. Emad
you question is fully clear.. but you can see all existing names of the account group for customer at the creation screen for new customer T-code XD01 like below attached
Regards
Mahmoud El Nady

Add BP in a target group at account creation

Hello experts !
I'd like to know how in java or ABAP I could automatically add a BP in a target group when the account is created. The BP should after that use a campaign code associated with the target group, immediately after account creation.
Thank you for your help !
Julien

Hi Julien,
You will have to either create a custom program which gets triggered whenever there is any new BP created and then that program should execute the refresh of the target group.
Or you setup the frequency of the Target group refresh in background to to say hourly.
I am sorry i don;t see any other solution approach to this.
rgrds,
Randhir
Edited by: Randhir Soni on Jun 17, 2011 4:28 PM

Customer account creation (FD01)

Similar Messages

Maybe you are looking for