Customer ALE Error (E1KNATM segment)

I am sending customer master data from one client to another within SAP using standard DEBMAS07 type Idoc.
In the receiving client IDOC fails with error message as 'Invalid date'
After detailed analysis I found that it is due to segment E1KNATM segment (Customer general data tax category) fields wrongly filled. Normally while updating tax category fields like exempted from (KNAT-EXDF) and exempted till (KNAT-EXDT) are left blank. When Idoc is generated for such customer record these fields are updated with value as 00000000 and which fails standard date validation.
Kindly suggest solution for this.
Upendra

Hi Madhu,
I am not using any external system to generate these Idoc.
This ALE is being done within two clients for same SAP system.
Here are the details to reproduce this error.
use transaction BD12
Use any customer for which there is a entry in KNAT table and fields EXDF and EXDT are blank for this entry
Trigger DEBMAS type Idoc for any other SAP client
Check for E1KNATM segment in corresponding Idocs in both sending and
receiving clients.
Fields EXDF and EXDT are updated with values 00000000 which is wrong

Similar Messages

ALE - error in custom message type creation

HAI friends,
I am new to ALE IDOC, i am creating custom message type for custom table . i created segment, idoc, message type and executed outbound program . in outbound client, status is dispatch ok. so problem in outbound.
my problem is in inbound . i created one function module idoc_input_zmsg. In test tool for idoc processing ie. TCODE WE19, i clicked my segment and then i clicked the inbound function module button . In function module text box my own function module idoc_input_zmsg is available. but when i click ok button, i am getting the following error.
"INTERFACE FOR FUNCTION IDOC_INPUT_ZMSG IS INCORRECT".
PLS HELP ME . THANKS IN ADVANCE.
WITH REGARDS,
SENTHIL KUMAR.R

All the IDOC processings FMs should have similar interface like this.
*" IMPORTING
*"     VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*"     VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*"     VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*"     VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*"     VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*"     VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*"      IDOC_CONTRL STRUCTURE EDIDC
*"      IDOC_DATA STRUCTURE EDIDD
*"      IDOC_STATUS STRUCTURE BDIDOCSTAT
*"      RETURN_VARIABLES STRUCTURE BDWFRETVAR
*"      SERIALIZATION_INFO STRUCTURE BDI_SER
*" EXCEPTIONS
*"      WRONG_FUNCTION_CALLED
Check if you have different one. Even if the name of variables is not as above you may get the error message .
Cheers

Error when segment of an IDOC is edited in we31

Hi All,
I want to edit an segment of an idoc in we31, I want to add new fields to a segment. When I try to do this i get an error message "Segment type E1BP****** is flagged as generated". How can i edit the segment in this case now?. Is there any customizing related to it.
When i see this segment type in table EDISEGMENT, it is marked as generated (field generated is set to X)
Edited by: Devendra A M on Feb 5, 2009 7:03 AM

I guess you can do one thing ... you can CANCEL RELEASE the segment and then make necesasry changes and then again RELEASING the segment.
you can also visit this link
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
in that you go to the "Change Segment" sub-topic.
Edited by: Premal Mistry on Feb 5, 2009 11:47 AM

About ale error handling in workflow?

Hi,
can any one explian in detail ale error handling through workflow,its urgent for me.
Regards,
phani

Hi Srikanth,
follw the steps it will helpful u,
Pre-requisites.
It is assumed that the reader of this article has some knowledge in SAP workflow BOR objects and ALE Idoc process like process code, Partner Profile etc.
Description
Here, we will be discussing in details the Error handling of an Inbound Idoc through triggering an event, which in turn will be triggering a workflow attached to the workflow.
Steps:-
1.     Create custom BOR object with the events, Start and Stop event
2.     Create a workflow for the error handling, like generating a notification whenever an error occurred in the Inbound Idoc.
3.     Creation of Function Module and attachment with the Process Code
4.     Create the settings for the Inbound Process of the Idoc through the Process Code.
Creation of BOR objects. Go to the[http://www.****************/Tutorials/ALE/ErrorHandling/page3.htm] transaction SWO1.
Enter a name for the Object type and click CREATE button for creating the custom BOR object.
Enter the details required for creating the BOR objects...
Create the Key fields and events of the BOR object.
For creating the Key fields place the cursor on the Key fields and Click on the Create Button
Create events for triggering the workflow and stopping the workflow.
For creating the event place the cursor on the EVENTS and Click the create button like Key fields.
Create two events.
Enter the event name description etc and proceed further to create it.
Similarly create another event for ending the Workflow in the similar manner like that created earlier.
Now, Generate the BOR object through the generate button
Release the EVENTS and subsequently release the BOR object.
After the creation of BOR object
Create a workflow for the generation of notification whenever an error is reached in the Inbound Idoc.
Execute the transaction SWDD.
Click on the CREATE button for creating the workflow for error handling.
Choose the Step type to be inserted for the notification like here we are using Send Mail option for sending a mail to the user whenever any error occurred.
Activate the Workflow and test it whether it is working as per the requirement.
After the successful completion it is required to attach the workflow with the event.
Go to the Header section (Denoted by CAP).
Go to the Start Events TAB.
Enter the details of the event with which the workflow should be linked like the category, BOR object type and the event with which that should be linked.
Enter here the BOR object that has been created and give the name of event created for starting the workflow.
Click on the Binding Button for generating the binding between the event and the workflow.
Click on the Binding Button for generating the binding between the event and the workflow.
Generate the binding and click OK button to save the binding.
Click on Activate / deactivate button for activating the linkage.
After the successful linkage the following sign will appear on the workflow.....
This shows that the workflow has been linked to the event and it will be triggered whenever that particular event will be triggered.
After the creation and successful linkage of workflow with the event it is required it is required to generate a function module and attached it to the process code.
Go to SE37 transaction and copy a standard process code function module to a custom one. Do no delete any parameters from the function module as the SAP standard program itself is calling this.
In that function module do the required validation and whenever the validation fails set a standard parameter WORKFLOW_RESULT to 9999 from within the function module, otherwise normally proceed to set the status to 53.
After the creation of function module it is required to attach it to the process code and corresponding attached to the message type at the Partner Profile stage.
The process code is being created through the transaction WE42
Go to the change mode and click the New Entries button for creating new process code.
Enter the Process Code Name, description and choose the processing type as Processing by function module. Click on the extension button of Identification.
The details for the of the Process Code after clicking the identification button will be
Whenever idoc arrives into the Destination system then the standard SAP triggers the Process code attached to the Message type in the partner profile. The partner profile is being maintained in the transaction WE20.
Since, it is and inbound scenario so the message type and the corresponding process code will be maintained for the Inbound Parameters.
Click on Create Inbound Parameters button for creating new Inbound Message type and the corresponding message type.
Enter the process code for the corresponding message type.
Click SAVE button for saving the changes.
Whenever the IDOC arrives into the target system, it checks the partner profile and finds the corresponding process code. The process code is being linked with the function module through which the IDOC is required to be processed.
Regards,
Phani.

Fiori Uncaught Error: The segment {SAP__Origin} is required.

Hi,
We are trying to extend the Purchase Contract Approval by adding custom field in item detail view. We are able to view the header detail view but when try to access item detail view error below occur in IE. Thanks
Uncaught Error: The segment {SAP__Origin} is required.

If you use segement in the New General Ledger this will not appear
in OME9 as a field that you can make either Required, optional, display,
or hidden. OME9 is not regenerated based on settings made in financial
accounting making fields such as segment visible. These fields relate
to table EKKN which does not contain the segment field.
Instead this field is derived when you enter the cost center/profit
center in the account assignment data for the purchase order.
You can check using ks03 the master data of your cost centre. And
if you have a profit centre maintained here the segment will be derived
via this profit center. Therefore you need to next check with
transaction ke53 to see what segment is maintained here.
Hope this information helps you.

Custom 404 Error page in Sharepoint Foundation 2013

Hi all,
How to point to the custom 404 error page in Share Point Foundation 2013. I have seen some links but not working for me. Please me let me know if you have any suggestion.
Thanks.

Can i create any page and pass the page url in it,like if i have created a page as custom404.aspx under pages library so do i need to do like this?
$spsite = Get-SPSite "<http://sharepoint:1000/>"
$spsite.FileNotFoundUrl = "<pages/custom404.aspx>"
is this the correct way or i am doing incorrectly??
please suggest

How can I set up a custom 404 error page on OSX Server?

I moved my web site to a local server and changed the structure drastically. Unfortunately I am getting hits for information that was on the old server which I haven't put back yet. I'd like to set up a custom 404 Error Page to let people know what's up. In server.app I can set up a 500 error page but not a 404 and when I tried hand coding it into the sites .conf file I really messed things up. It took me a while to get that all corrected!
Thanks for any advice,
Bill W

Found it!
Under the web server Advanced Setting set "Allow overrides using .htaccess" then create an .htaccess file in the root directory with the line:
ErrorDocument 404 notfounderror.html
Use whatever HTML/PHP/etc. document you have created.

Error B2B Segment ISA at guideline position missing

Hi Guru's
Wehn we are running the B2B by giving it EDI file we are getting following error:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>C0A8633811F1CC820E7000006E1F0400-1</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5016: A mandatory data element is missing.</errorText>
<errorDescription>
<![CDATA[Machine Info: (soaappcrp1.dpi.com)
Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="GroupReceiverID" value="9099751019"/>
<parameter name="TransactionImplementationReference" value=""/>
<parameter name="Size" value="660"/>
<parameter name="TransactionChildCount" value="23"/>
<parameter name="InterchangeReceiverQual" value="01"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeControlVersion" value="00200"/>
<parameter name="GroupID" value="OG"/>
<parameter name="SubelementDelimiter" value=">"/>
<parameter name="InterchangeSenderQual" value="12"/>
<parameter name="InterchangeUsageIndicator" value="P"/>
<parameter name="GroupChildCount" value="1"/>
<parameter name="InterchangeSenderID" value="8283234100 "/>
<parameter name="InterchangeControlNumber" value="000271883"/>
<parameter name="InterchangeTime" value="1315"/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="ErrorScope" value="Transaction"/>
<parameter name="GroupVersionNumber" value="004010"/>
<parameter name="InterchangeDate" value="081103"/>
<parameter name="TransactionTrailerControlNumber" value="171889"/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="GroupSenderID" value="8283234100"/>
<parameter name="InterchangeAuthorizationInfo" value=" "/>
<parameter name="GroupTrailerControlNumber" value="271883"/>
<parameter name="InterchangeTrailerControlNumber" value="000271883"/>
<parameter name="SegmentDelimiter" value="
"/>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
<parameter name="TransactionID" value="875"/>
<parameter name="GroupControlNumber" value="271883"/>
<parameter name="InterchangeComponentElementSep" value=">"/>
<parameter name="InterchangeSecurityInfo" value=" "/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="GroupAgencyCode" value="T"/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
<parameter name="InterchangeReceiverID" value="041158668 "/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="GroupTime" value="1315"/>
<parameter name="TransactionControlNumber" value="171889"/>
<parameter name="GroupDate" value="20081103"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="ElementDelimiter" value="*"/>
</errorDetails>
</Exception>
In the logs I am seeing the following error 2009.01.28 at 02:28:11:116: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup
1c
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = TransactionID, val = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Transaction]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 6177FD270834B0EEE043C0A86365B0EE-274-1-2
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = xsdFilePath
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Transaction, controlNumber = 171889
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = lck
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {5CB8FDC2-ED26-11DD-93E2-00151769BE8C} position = 0
2009.01.28 at 02:28:11:605: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2009.01.28 at 02:28:11:620: Thread-40: B2B - (DEBUG) iAudit report :
Error Brief :
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{5CB88E1E-ED26-11DD-93E2-00151769BE8C}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Wednesday, January 28, 2009</ExecutionDate> <ExecutionTime>02:28:11 AM (PST)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>4</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">4</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath/> <FileName/> <LastModified/> <FileSize/> <DataURL>file://</DataURL> </DataFile> <Interchange Guid="{5CB8EE72-ED26-11DD-93E2-00151769BE8C}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>856</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">12</Link> <Link Name="InterchangeSenderID">8283234100 </Link> <Link Name="InterchangeReceiverQual">01</Link> <Link Name="InterchangeReceiverID">041158668 </Link> <Link Name="InterchangeControlVersion">00200</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">12</Property> <Property Name="InterchangeSenderID">8283234100 </Property> <Property Name="InterchangeReceiverQual">01</Property> <Property Name="InterchangeReceiverID">041158668 </Property> <Property Name="InterchangeDate">081103</Property> <Property Name="InterchangeTime">1315</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00200</Property> <Property Name="InterchangeControlNumber">000271883</Property> <Property Name="InterchangeAckRequested">0</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x3e</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x2a</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0xd0xa</Property> <Property Name="SubelementDelimiter">0x3e</Property> <Property Name="InterchangeChildCount">1</Property> <Property Name="InterchangeTrailerControlNumber">000271883</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{5CB8F926-ED26-11DD-93E2-00151769BE8C}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>107</StartPos> <Size>732</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="GroupSenderID">8283234100</Link> <Link Name="GroupReceiverID">9099751019</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">OG</Property> <Property Name="GroupSenderID">8283234100</Property> <Property Name="GroupReceiverID">9099751019</Property> <Property Name="GroupDate">20081103</Property> <Property Name="GroupTime">1315</Property> <Property Name="GroupControlNumber">271883</Property> <Property Name="GroupAgencyCode">T</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">271883</Property> </Properties> </NodeInfo> <Transaction Guid="{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}" TransactionAckCode="R" RError="4" NError="0" OtherWI="0"> <DataXPointer> <StartPos>166</StartPos> <Size>660</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>875</ID> <Name>GROCERY PRODUCTS PURCHASE ORDER</Name> <GroupID>OG</GroupID> <Standard>X12</Standard> <StdVersion>V4010</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="TransactionID">875</Link> </Links> <Properties> <Property Name="TransactionID">875</Property> <Property Name="TransactionControlNumber">171889</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">23</Property> <Property Name="TransactionTrailerControlNumber">171889</Property> </Properties> </NodeInfo> <TransactionErrors> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="1" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Name>INTERCHANGE CONTROL HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>ISA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">0</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">430</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="2" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Name>FUNCTIONAL GROUP HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GS</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">1</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">469</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="3" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GE(Functional Group Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Name>FUNCTIONAL GROUP TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GE</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">2</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">486</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="4" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment IEA(Interchange Control Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Name>INTERCHANGE CONTROL TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>IEA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">3</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">490</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> </TransactionErrors> </Transaction> </FunctionalGroup> </Interchange></AnalyzerResults>
2009.01.28 at 02:28:11:621: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processIncomingDocument sErrorGuid =
I have cheked the EDI payload in spec builder and it comes up fine. I tried doing whole configuration by getting new ECS file from spec builder, making a Buisness Action, creating TP, creating aggrement.
Any guess what the issue is.
any pointer will be highly appreciated.
Regards
Sahil

Hi Sahil,
It seems like the ecs file used in the document definition contains the Interchange(ISA)/group segments(GS). Please remove the these ISA and GS segments and use only the transaction set (ST) segments.
Thanks and Regards,
Prasanna

How do I create custom HTTP Error Pages for a Weblogic Server

I need to be able to display custom HTTP error pages such as a 404 from my Weblogic
Server when my web application is not deployed.
Is this possible?
I have seen some suggestions about putting something like:
<error-page>
<error-code>404</error-code>
<location>Error404.jsp</location>
</error-page>
in the web.xml for my web application but I can't see how that would work since
the web application would not be deployed. I need to set these messages at the
server level.
Any help would be appreciated!
thanks

Your CategoryAxis id="ha_ccm" uses categoryField="period", and this is the label for the your series (i.e. "Quarter 4/2010"). You cannot have multiple categoryFields for the CategoryAxis; it can only use one data field for the labels. You can use data tips and/or label functions to show the individual series' values on the columns.
Also:
Your labelField in the ColumnSeries are set to a ColumnSet name instead of a field name in your dataprovider.
Font must be embedded if you set ColumnChart.showLabelVertically="true".

Custom tool error for COMexception: The report application server failed.

hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
   at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
   at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help me

Hello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don

How to solve "Error: code segment of method _jspService(...) too large"

Hi, I am trying to compile a JSPX Page and I keep getting "Error: code segment of method _jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse) too large", in some Forums say that this Error is due to a Limit in the Size of Code that a Try/Catch Block can contain (64K), They suggest to remove such Blocks but I don't know how to do this in JDeveloper 10.1.3.2.0, some advice or suggestion?
Thanks in Advance.
PD: I cannot refactor the Code into different Pages.

Hi,
if I remember well then the problem is solved by setting the compiler used to JAVAC. This is a setting in the project properties
Frank

Custom 404 error page only works 75% of the time

I have made custom HTTP error pages for my app and they work for Mozilla, Opera and Firefox but IE seems to have its own personal 404 error page.
Anyone know how to make IE work and play well with others and display the custom 404 page like the other 3 browsers do? I did clear the IE cache, twice.
The environment is Tomcat 5.0.19 (stand-alone, no IIS) running on Window Server 2003 Enterprise
Thanks for your help!
Will

You got to love microsoft products huh. Microsoft has turned on its friendly error pages. Unfortunately, to fix this, you have to have your clients modified their browser settings. Inside the IE browser, do the following:
1. From menu choose tools->internet options
2. Choose the advanced tab
3. Uncheck the checkbox that says "Show friendly HTTP error messages"
That will do it for ya.

COPA derivation error: no segment found

Hi
We are executing transaction code FAGL_IT_01 for the year ending closings we get the error message COPA derivation error: no segment found
Regards
Medha

Hi Medha
It seems you have written a derivation step in KEDR to derive segment.... Check your Der steps in KEDR and see if its written correctly
Also, in the attributes tab, you might have selected "issue error msg"... Is it so??
Br, Ajay M

Custom HTTP error page

How do I create custom HTTP error pages for WebLogic Server 6.1


Refer to the following document:
          http://e-docs.bea.com/wls/docs61/webapp/components.html#101747
          Eric
          "Sejal" <[email protected]> wrote in message
          news:3bc1e18f$[email protected]..
          > How do I create custom HTTP error pages for WebLogic Server 6.1

FSCM Worklist - Customer Contact Error

FSCM Worklist - Customer Contact Error
When entering the Customer Contact and trying to save - getting Error
Function Call failed; Could not find UDM_GOS_ATTCH_COMMIT
Basis recently activated
FIN_FSCM_CCD_INTEGRATION
FIN_FSCM_CCD_INTEGRATION_3
but not:
FIN_FSCM_INTEGRATION
Would this be the problem?
Please advise
Thanks
Trevor

Hi trevor did you get a solution for this error? If you did please share.
Thanks,
Rick

Customer ALE Error (E1KNATM segment)

Similar Messages

Maybe you are looking for