Customer master maintenace checking

Hi All Expert,
I want add the following checking to the Customer Master Maintenance,
1. Customer Group and each User ID can create / Modify / View some group of customer
2. Customer group will add to the single role for each UserID
3. When create Customer master using XD01, check the user 's single role authorization objects KNA1-BEGRU, if not same, cannot save.
4. For XD02/XD03, if user's single role authorization object not same, cannot view the customer master.
Please tell me which Enhancement or User Exit I can apply the above checking?
Thank you very much.
Terry

Hi,
Use this user exit for your requirements for XD01.
EXIT_SAPMF02D_001
For XD02/XD03 use Authorization objects. Consult with your basis consultant about Authorization Objects.
Regards
Ahsan.

Similar Messages

Credit control field not visible in customer master after checking Spro

Hello Gurus,
I have configured Automatic Credit Control In IMG.
I have checked all the necessary spets required for the avtivation of Automatic Credit Control.
But I am facing in problem and will appreciate all your help for this problem.
In Customer master> Sales area data> Billing Document--> delivery and payment terms. Within delivery and payment terms the feild for credit control area is not visible.
I have checked in spro>financial accounting> Ac rec & Ac payable>customer account>master data>preparation for creating customer master> define account groups with screen laypouts (customers).
Within Define account groups with screen laypouts (customers)>account group 001(soldtoparty)details>field status>sales data>billing-->Hedging and credit contr. area I have tried it with optional as well as reuired entry and still the credit control field is not visible in customer master.
Pls provide me the steps as well as solutions for the problem.
Thanks & regards,
Dev.

pls check accunt group again
rgds
nitin

Customer Master Record - Check Rebates and Price determination

Dear Gurus,
Can someone explain to me how I can go back to my list of customers (payers) to make sure that:
- Rebates
- Price determination
Are checked (Ticked) into the 'Billing Tab' of each one of my 300 customers... I forgot to do it and it is obligatory.
Your help is greatly appreciated.
Kind regards
Chris

Hi,
use TC MASS, object type KNA1. Choose KNVV-BOKRE for rebate and KNVV-PRFRE for price det.
BR,
Zuzana

Deleting Partners from the Customer Master that are on Open Sales Orders.

Does SAP handle removing the Partner from Open Sales Orders when a Partner is deleted in the Customer Master. For us, this is not happening, this there some config that must be turned on for this to happen ?
Or do we have place in code in a User Exit in the Customer Master to check for Open Sales Orders and if so, block the Deleting of the Partner ? If so, what User Exit should be used ?
Looking to see how others have handled this.
Thanks,
David

Hi David,
Try this user exit.
RFDRRANZ User exits: Accounts Receivable Information System
Regards,
Vijay

Deleting Partners on the Customer Master.

Does SAP handle removing the Partner from Open Sales Orders when a Partner is deleted in the Customer Master. For us, this is not happening, this there some config that must be turned on for this to happen ?
Or do we have place in code in a User Exit in the Customer Master to check for Open Sales Orders and if so, block the Deleting of the Partner ? If so, what User Exit should be used ?
Looking to see how others have handled this.
Thanks,
David

SAP does not provide this functionality out-of-box.
For one of our clients we implemented the deletion of partners in the Sales order user exits (MV45AFZZ) instead of the customer master user exit.
Every time a open sales order is processed on a change mode (VA02) the partners will be redetermined by the user exit and necessary deletions / updates would be performed.

Need help in BDC for Customer master change

I have an interface for Changing Customer master data and I am using BDC for that. I have three scenarios:
1. Insert new data.
2. Change the existing data.
3. Delete the existing data.
The BDC is working fine in the first two scenarios, but if i want to delete an the existing data, lets say for e.g. Name3 or Email Id its not working because i need to pass the value as blank in the BDC for this field.How would i check? i thought i would first get the existing value in customer master and check if the interface value is blank then make this field value to blank in BDC.
But this is not working because in case the interface wants to remove only the email id, the other fields would still be blank.
How to handle this scenario, please advice.

What is the difference between 2 and 3? Isn't "deleting data" in your context the same as changing to a blank value?
Why can you not just fill the value as received in the input data into the BDC data?
Thomas

How to include a new field for checking duplicate customer master

Dear All
we have activated the standard procedure to check duplicate customer master data. This is a standard procedure as below :-
Procedure:
Run SM30, key in Table V_T100C, select Display or Maintain, set App area F2. Here you can change current settings.
Check the transaction OBMSG for application area F2, where these messages are maintained and at this place you can convert the message from warning to error.e user needs one more field to be added to this check.
It is working perfectly fine but it only compares two fields for duplicates in the customer master i.e the customer city and name.
Is there a way to include a new field in this procedure ? For example we also want the system to check duplicate entries for field name " street 5" and give a warning /error message incase if there is another entry already existing on the master data.
regards,

Hi
Use the enhancement SAPMF02D to check these values.
Regards
Eduardo

Customer Master giving "Data is incomplete; check ;Message F2125" on saving

While creating Customer master for a newly defined sales organisation, when i try to save the entry, the screen goes to Partner Function and it displays the error :-
Data is incomplete; check
Message no. F2125
What needs to be done
Thanks
amit

Hello Amitava,
As part of your analysis, plz click on the msg being displayed to analyse it further.
Some pointer: Check U've created all the reqd partner functions..SP,SH,PY,BP.
Reward, if helpful.
Rgds,
Raghu.

Check Vendor Master when Creating Customer Master

Hi,
When we create customer master, we would like to check against vendor master for similar names so we can alert the user to link the customer to vendor (for contra purpose).
Is there any standard checks we can configure? If not, user either has to check manually or an enhancement has to be developed.
Thanks.

Hi, exit LXF05U01

Sales office authorization check in customer master,Sale order and billing

Hello Experts
We need to restrict authorization for customer master, sale order and billing based on sales office.
Can somebody guide me how to activate this ? Has anyone of you have successfully done that?
Regards
kumarlib

Hello Kumar,
User authorization is within Basis expertise, but if you want to get some feel for what authorization objects are take a look at trans SUIM. But basically how it works is for a given transaction the level of check is specified -- in this case Sales Office. Based on values stored in that field the user is allowed or not allowed transaction access.
So you determine whatever the needed matrix is for authorization restriction (i.e. user A can access Sales Office xxx, user B can access Sales Office yyy & so on). Also give Basis the transaction codes to restrict, along w/the technical table/field for each (like from customer master - KNVV-VKBUR, from sales doc level VBAK-VKBUR). Basis sets up the authorization object w/assignments to the users accordingly.
This is standard SAP & your Basis support should be familiar with it. Good luck.

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Error in creation of customer master...

Dear SAP masters,
While creating customer master I am getting this error "Field KNVK-NAME1 does not exist in field status tables (TMOD*)".How can I resolve this?

Hi,
What are SAP Notes?
SAP Notes give you instructions on how to remove known errors from SAP Systems. They include a description of the symptoms, the cause of the error, and the SAP Release and Support Package level in which the error occurs. SAP Notes that contain correction instructions can be implemented using Note Assistant.
You need to log on to www.service.sap.com. This would ask for a S-User ID and Password. Check with your System Administrator for the same.
Once logged on, go to the link Help & Support --> Search for SAP Notes. Provide the SAP Note number. Read the note carefully and do the needful.
Contact your Basis person. He would be able to help you.
Regards,
Rajesh Kumar

Report to fetch the text information from customer master sales data

Dear Experts,
We have come up with a requirement where the business want a report/list of the customers for whom a particular text is not maintained in customer master -sales data.
There are many Z text id are configured and are maintained in Sales data- extras- text. In addition, business also need some key fields from the customer master such as name, city, delv plant, payment terms, sales off, sales grp etc.
I could not get any standard table where the text is maintained with the customer numbers. Table STXH can give the customer numbers for a particular text id type but what is maintained against the given text id is not fetched from the table.
So we need the valuable inputs to realize the requirement.
As an proposal, we are aiming to develop custom Z report with the FM READ_TEXT to get the text information with the customer no ( object type KNVV and text id ). But for the additional information, what should be the actual logic for fetching the data. say if this FM is used, what should be the sequence of the logic and ideal selection parameters.
In addition, we aim to use BAPI BAPI_CUSTOMER_GETDETAIL2 to fetch some of the customer ifnormation but many fields are not found in this . can we use some other bapi which can provide the complete general/sales data of customer ( delv plant, sales off, sales grp, custo grp, incoterms, payment terms etc)
Kindly suggest accordingly.
Many thanks in advance.

Hi Dharmendra Kumar,
I guess the best would be to check in ABAP General forum on the READ_TEXT sequence/ logic etc..
For customer details, the available BAPIs are:
BAPI_CUSTOMER_GETDETAIL
BAPI_CUSTOMER_GETDETAIL1
BAPI_CUSTOMER_GETDETAIL2
However, you might have to check classes in SE24 to find any existing classes and its method yo give you all the information of a customer. Also check this thread: [BAPI for customer details like in IDoc DEBMAS;
Regards,
Raghu.

Custom Master Page Issue in Intranet

Hi All,
I hope someone can assist with this, we implemented this particular SharePoint 2007 portal approximately 5 years ago. An outside consultant created this custom master page, for some reason out of nowhere we are experiencing this bizarre issue with
the master page and checking in and out documents. I have attached an image showing the error message being displayed below(couldn't attach until my account was verified but it states 'Error invalid viewstate, port 52208, user agent Mozilla/4.0..., viewstate,
referrer, path). I came across one source on the web that stated something about the search box code and it causing issues out of nowhere on the master page. So in my dev environment I made the change and removed the following code from the master
page below.
<td style="padding-top:8px;" valign=top>
            <asp:ContentPlaceHolder id="PlaceHolderSearchArea" runat="server">
            <SharePoint:DelegateControl runat="server" ControlId="SmallSearchInputBox"/>
            </asp:ContentPlaceHolder>
</td>
As soon as this code is removed and the page is published again everything begins to work again, the problem is I can't remove search from this intranet portal as it is heavily used. Any assistance would be greatly appreciated.

By any chance, do you still have access to the solution package in which the master page was contained? Normally, you would see another .ascx user control overriding the delegate search control in there. I'm almost positive that this custom control is
what causing this issue.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

Automatic Payment terms without referrring Customer Master nor manual entry

Hi,
I have a credit memo with reference to one billing document. It is automatically coming with payment terms which is not maintained in customer master nor manual entry in the document. I had checked all the configuration related settings for the document and payment terms assignment. I had debugged and checked for any user exit or function module.
I have no clue in this regard and can anybody throw some light regarding to fix the problem.
Regards
Sashikanth

Hi,
Check if the billing document has payment terms. If yes, even if customer master doesnt contain payment terms the payment terms will be copied to the credit memo through standard copying control maintained in IMG, when you create a document with reference to some document this copying control gets activated.
Also check user exit RV60AFZZ if there's any code written in it to default payment terms by billing doc type.
Regards,
Amit

Customer master maintenace checking

Similar Messages

Maybe you are looking for