Customer Report doubt ?

Hi , we have customer ranking reporting requirement .
This customer ranking is by company wide report and also have sales Org is optional selection .
If the user select any sales org , would it be possible to calculate the customer ranking by this Sales Org and If User has not selected any Sales Org and executed report , would ranking get calculated by company wide ?
Also , we have below KF in report , Sales Last 12 month , Sales Prior 12 months and we are planning to have 0CALDAY variable by ranges . so If user selected the 3 month range , would it be possible to calculate ranking by using above KF .
Let me know if my question is not clear .
Regard

Hi,
In the report you will be having key figure for sales order. Right click the key figure and copy it into new key figure with same definition. Change the description of the new key figure to Rank and set the property of single value calculation as rank.
In output, you will be having key figure displaying sales order value as well as another key figure Rank based on the sales order value.
Hope this is what you are expecting.
Regards
Akhan

Similar Messages

PP-PM-QM combined customized report doubts

Dear all,
I am working on customized reports.Its a repetitive manufacturing
This report combined all the three modules
According PM-Mech Breakdown,Electrical Breakdown,Material shortage due to transport
According to qm-Tell me the basic things in QM how will collect qm reports by keeping with reference to what?
Note:To make this report PP is the basic plat form
since its repetitive manufacturing we can not take any order number for reference to develop this report.
Kindly let me know your suggestions and also please give the related tables for repetitive manufacturing,PM & QM
Regards
Rajasekaran

Once invoice posted via LIV is blocked, it needs to be released, there is no automatic block removal. Normally MRBR prog. is scheduled to run once a night, this will do the clearing.

Need to submit custom report when email option chkd and po approved

Hi All,
We use R12, our requirment is to submit a custom report when PO is approved.
Not in all cases we need this. when user select 'Approve' option for a Manually created PO,
and in the Approval form, when the User selects 'Email' check box and approves it.
Irrespective of value that is given in email field, when that Email check box is checked and PO is approved, then the custom report should get submitted.
For this our funtional team is requesting to copy the PO approval Workflow and write a event there.
But I feel this can be achived in much easier way. But not getting any ideas.
Can anyone let me know what could be the best and effective way than modifying Workflow.
Can we do with custom.pll.
where I would check if the email check box is checked in the box and if the approve button is pressed then to launch the custom report.
One more doubt, can we get the values that are being enterd in the form. I mean, if the po number is 55, in the custom.pll
can we get that value into our custom.pll code, which i need pass as a prameter to the report.
Please through any ideas. Thanks
Edited by: 834095 on May 4, 2011 9:05 PM

Pl do not post duplicates - Submit Custom Report in PO Approval Process
Srini

Error REP-0300: ORACLE error occurred while running Custom Report

Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .

Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Customized reports

Dear experts,
Can any one explain me regarding Customized reports.
I have not involved while creating Customized reports.
Plz explain me in stepsu2026u2026by taking an exampleu2026.COSTPLAN/BUDGET.
With TCodes.
So it will be helpfull easy to understand.
I think it is not standard question,but even im having doubt.
Regards
Chandra

Hi
The essentials for creating a hierarchy report are as follows:
· Create a form T code CJE5 (Report Painter)
You use a form to stipulate the contents and structure of the detail list in a report. Among other things, you define the value types to be displayed in a report, for example, the plan, actual, and/or budget values.
· Create a report
You define the drilldown list of a specific report when you create it. In the process, you stipulate the attributes used to evaluate the data in a report.
There is a logical database maintained in syste, for PS it is PSJ. You can view the same in T code SE36. The data for reporting is extracted from this database.
Please refer for details
http://help.sap.com/saphelp_erp60_sp/helpdata/en/5c/8dafd0555411d189660000e829fbbd/frameset.htm
Regards

UCCX Historical Reports Doubt

Hi ,
I have telephony setup running on CUCM 9.x integrated with UCCX 9.x.
Everything working fine and I can generate the Historical reports.
I have some doubts for generating the reports which is mentioned below.
1. Need to generate the agents abandoned calls,Placed calls and missed calls in a single report.I know i can generate these information's in two reports ,but required all this in a single report.Will it is possible?
2.When generating reports I required only external numbers information not required to show the internal numbers on the reports.Is there anyway I can uncheck the internal number while generating the HR?
Thanks inn advance
Nithin Louis.

Hi Nithinpro,
Answering your two question, there's not way to custom the information displayed in the HR report type.
One option to custom report is running Microsoft Silverlight but is not a easy task.
Check this link:http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/programming/guide/uccx85hradm.pdf
Regards

Custom report to track the documents

Hai All,
My Client requires a custom report to track the document flow any time i.e., once the material arrives the purchase dept makes an entry like PO date the date of arrival,and Gr date the GR approval date and document handed over for Invoice verification date and payment made date.
How is achieve this?
Regards
R.Senthilnambi

No My client requirement is not like that,suppose one fine day if he wants to track the positon of GRN document or a bill at what stagei.e.,if in FI if they say they have not received any document to process or they hold the document for days and say just today GRN has been handed over to him ,The Materials guy has to generate a report and say this is the day the document is handed over to you.
Is this can be done.or only out of SAP.
Regards
Senthil

Purchase Register Custom Report -

Hi Expert,
Hope you all are fine!
I am new to CIN.
I have to develop a custom report for LIV details which will contain the follwing column:
could you please help me to know from where i can take these field i.e reference table and links.
Tax Invoice (ref no.)
Invoice Date
Vendor Code
Vendor Name
Vendor complete Address
State
Line item Description in invoice
Vendor TIN
Vendor CST
Value of Goods
Freight & octroi
Packing & Forwarding
Excise Duty
Education cess
Sec.Education
CST value
VAT Value
Tax Code
Tax Code Description.

As per ur reference: -
In PO, Condition are like--- PO Qty is 10
Basic Amount..........1000
taxes.........................100
Freight.........................50
Other...........................20
and we have receive only 5 qty out of them, means all the condition amount will be 50%. like...
Basic Amount..........500
taxes.........................50
Freight.......................25
Other.........................10
all condition will be calculate according to qty 5 not for 10 as showing in PO..
I want to pick these condition. (according to 5 qty.)..
Now suggest...

How to add a specific parameter in custom report

hi,
I have created a custom report in OIM 10g. I have three input parameters. startdate, enddate and resource object name,. With start date and end date the report is displaying correctly. when i add the resource object name as the third specific parameter is throwing the below exception
java.sql.SQLException: Missing IN or OUT parameter at index:: 15
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1869)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3858)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.thortech.xl.dataaccess.tcDataBase.readPartialStoredProcedure(Unknown Source)
at com.thortech.xl.dataaccess.tcDataBase.readStoredProcedure(Unknown Source)
at com.thortech.xl.dataobj.CallableStatementUtil.execute(Unknown Source)
at com.thortech.xl.ejb.beansimpl.ReportOperationsBean.getPagedReportData(Unknown Source)
I have given the input parameter correctly in meta data also. anywhere else we need to mention the specific parameter?
Thanks

Hey,
From OIM 9.1.0.2 Reports you have two options:
With OIMReports:
1- Including in XML files the parameters as section: Examples of InputParameter tags and ReturnColumns tag
2-And Creating a New Entry in the REP Table.
http://docs.oracle.com/cd/E10391_01/doc.910/e10365/reporting.htm
Section: How to create Report in OIM 9.1.0.2.
With BIPublisher(easiest way-license is needed):
Once you downloaded and install BIPub in your application server you will have access to all OIM report definitions.Then it is just a matter of learning how to change a report definition. It's very simple.
It has a 'desktop tool' that you can install in your desktop. This specifc tool provides an extension to MS Word(MACRO) and you can even work with Word to generate report templates.
Descriptions:
0- deploy BIPublisher and OIM reports to your apps server
1- Install the BIPublisher desktop tools in your desktop
2- Modify the report query using the BIPub interface and add your UDF fields
3- Run the report you want to modify from BIPub and export the generated data as XML
4- Download the report template in RTF format
5- With RTF file(open it) in your MS Word
6- Load the XML file you generated in step 4 in your MS Word
7- You could load this specif xml change what you want. (word will have a 'BI Publisher' menu with different operations you can do)
7- With Report template(save it).
8- Update the report template in the report definition(using the BIPub web interface
9- Run the report again
It means that front end page you need to edit this in Word page.
The sources are here: http://www.oracle.com/technetwork/testcontent/oim-reports-9102-130923.zip
I hope this helps,
Thiago Leoncio.

Error while running a custom report in OIM

Hi All,
I have created a new custom report for OIM and written a stored procedure for that. But while running the report from Admin console, its throws the below error:
java.sql.SQLException: ORA-00911: invalid character
ORA-06512: at "IDM.XL_EXCEPTION", line 149
ORA-06512: at line 1
ERROR,19 Jun 2011 22:09:31,665,[XELLERATE.WEBAPP],Class/Method: ReportAction/displayTabularReport encounter some problems: Error executing stored procedure
Thor.API.Exceptions.tcAPIException: Error executing stored procedure
Line 149 : DBMS_OUTPUT.PUT_LINE('select stmt ='|| select_stmt);
"select_stmt" is a select query based on the OIM tables.
Please advice.

Seems like there is a invalid character in your SQL (Report's store procedure). Could you share with me whole content of this "select_stmt" variable?
regards,
Thiago L Guimaraes

Signal 4 error encountered while running a customized report

Signal 4 error encountered while running a customized report
We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
Can anybody tell the possible causes of signal 4 errors and their remidies ?

Thank you for the link, i will read it...
I have problemss with PDF output...
When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Spawned Process 499776
stat_low =84
stat_high = 0
emsg:was terminated by signal 4
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997

Migrate custom reports UCCX 8.0 to 9.0 issue

Dear all,
We migrated UCCX 8.0 to the new UCCX 9.0. After the migration the customized reports (designed with old version of Crystal Reports) not work in the new CCX Historical Reports 9.0.
Any idea or procedure to migrate easy the customized reports from UCCX 8.0 to 9.0 without re-design the report with Crystal Reports 11?
Thanks so much!

The advice I have seen in this forum, many times, is that you do NOT have Acrobat and Reader installed together, since some components are the same (same module name?) and installing Reader causes problems for Acrobat

Reading values from standard report in custom report dynamically

Hello Gurus,
I have a strange requirement, We have some standard reports which displays output in drop down blocked data. I want to create a custom report which will get that data in my internal tables.
Just to elaborate this requirement, I will give you a example:
I have a standard report which output as first line 'A' and second line as 'B'. Now when I press drop down in 'A', it displays line items say 1,2,3,4,5.... Similarly block 'B' once when pressed displays line items 6,7,8,9,10.
Here I want a custom report which directly read data from this standard report and gives us the values of line items 1,2,3,4,5 in one internal table and similarly items 6,7,8,9,10 in another internal table.
Hope the question clarifies the requirement now.
Request you to please provide the resolution.
Thanks,
Harjeet

Hi Harjeet,
Use sumit statement for standard program and export the list to memory. and then read list from memory and use in your custom program.
Use below code for reference.
DATA: t_list TYPE abaplist OCCURS 0.
SUBMIT rfdopr10
                ************** your options
                AND RETURN
                EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = t_list
EXCEPTIONS
    NOT_FOUND        = 1
    OTHERS           = 2.
BR,
Vijay

How to convert the customized report sales price list into excel sheet

hi friends,
i am faceing the probulem in VK13 report is not conveting into excel sheet, then i developed the one customized report,
in this report i am using the tables are a506, konp,and makt, result is coming and it converted into excel sheet in my systam. when i was clik on the excel sheet icon it comming excel format it working fine and save it. But in menubar list>export> localfile and select redio button spredsheet this navigation only it print the three colums not coming the total colums,
same program test in another system it not converted into excel sheet, when i am click on excel sheet icon it's given the message is 'VIEW CAN NOT BE SWITCHED, PRODUCT NOT INSTALLED OR INTEGRATION NOT ACTIVE'. but i giving the print privew it giving the three colums only,.
In program i am using regular using reuse_alv_grid_display FM only.
sorry this qusition is repeted becuse before that one mising some text.
any one plz help me.
thanks
raj

nice answer

Customer Report doubt ?

Similar Messages

Maybe you are looking for