Customer vender ofsetting

hi
i have a customer who is my vendor vice versa . i would like to know how to clear or ofsett it and want to know if there is any steps. i have assigned details in the customer master and vendor master. the balance in both the customer and vendor is being shown as open and not cleared item.
thanx

hello
Before you can clear items between a vendor and customer account, you must:
Create a customer master record for the vendor that is also a customer.
Enter the vendor account number in the Vendor field in the control section of the general data in the customer master record.
Enter the customer account number in the Customer field in the control section of the general data in the vendor master record.
Choose Clrg with vend. and Clrg with cust. in the company code data in both the customer and vendor master records. In this way, each company code can decide separately whether it wants to offset the customer against the vendor.
Reg

Similar Messages

  • Customer & vender opening & closing balences

    pls  send the customer & vendor opening & closing balenses
    teble & field names
      i am not able to find out that
      pls send any

    [1] Customers - KNC1. Vendors - LFC1
    These table stores total debits/credits for the month.

  • When customer and vender is same

    HI Gurus ,
                     Please tell me how to link when customer & vender is same

    First Create customer in XD01
    then create Vendor in XK01.
    Then Assign that vendor code in customer master --> General Data -->r Control Data .
    Then assign that customer code in Vendor master.
    your problem will be solved,.
    Thanks,
    Raja

  • Customer workflow Issue(Infospace User)

    Hi Export,
    In ECC 6.0.
    I have workflow for customer/vender creation. I got a work item in my inbox , it will show me Infospace User instead of Creator(Initiator). So my question is who is 'Infospace User'.
    I am trying Analyze  this issue through workflow log but didn't find Infospace User.
    If any one can have idea about this issue, please give me a solution.
    Thanks in Advance.
    Regards,
    Sourav

    Hi Martin,
    Tx-> SWI1-> Log-> Details -> The same screen below it will show me
    Agent                  Excuted Action      Date     Time   Object     Object Name
    Infospace User       Start event recived   09/08/2008        -
    Thanks in advance.
    Regards,
    Sourav

  • G/L Num in FCHn

    Dear Friends,
    I want to see the g/l account number in the output of Tcode FCHN.
    And also the description of g/l, vendorIname) also.
    Can anyone help for the logic.

    Dear Friends,
    Thank you for your replies.
    I get solved from my self.
    Actually FCHN displaying customer and venodr number if it has.
    i want to display if g/l num if exists and also cust/vend/gl descriptions.
    i selected single record from table BSEG by passing gjahr, belnr, bukrs and bschl ne 50.
    i passed hkont value to gl_acct variable when custom/vend doesn't have values in final output.
    then selected therespected descriptions from the tables which SRINU said in the first thread.
    It's working properly.. Thank you so much for your replies.

  • Ledger Report in Indian Format

    Hello All,
    My client require the FI ledger balance report in following format
              Ledger Details(Customer, Vender or Gla/c)                    
    Opening Balance(Monthly from last period)                                                           100
    Date     Item Text     Document Number     Offset GL(with Txt)     Debit     Credit     Closing Balance
    XX.XX.XXXX     XXXXXXXX     XXXXXXXXXXXXX     XXXX                            50     10     140
    My question is from which Table and fields i can fetch the data BSEG, BKPF, BSIS, BSIK, BSAS, BSAK,BSID,BSAD .
    Suggest

    Hi,
    For Customers:-
    Use function module BAPI_AR_ACC_GETPERIODBALANCES to get the opening balance and closing balance by passing the period.
    Use table BSID and BSAD to fetch the data for transactions in a period.
    For Vendors:-
    Use function module BAPI_AP_ACC_GETPERIODBALANCES to get the opening balance and closing balance by passing the period.
    Use table BSIK and BSAK to fetch the data for transactions in a period.
    For G/L accounts:-
    Use function module BAPI_GL_ACC_GETPERIODBALANCES to get the opening balance and closing balance by passing the period.
    Use table BSIS and BSAS to fetch the data for transactions in a period.
    For getting the debit amount and credit amount use field SHKZG (Debit/Credit Indicator). If S then debit, if H then credit.
    Other data you can also find in these tables.
    Regards,
    Guarav

  • Problem when creating business partner

    Dear Expert,
    I have a problem when creating business partner from T-code BP
    I can't input vendor number in company code header data
    The vendor account field is set to required entry.
    When create business partner, I make some entry like :
    Business partner category : organization
    BP Role                           : Landlord with vendor account
    Grouping                          : external number assignment
    Company Code                 : 1000
    The problem is everytime i try to input vendor number, it always failed.
    The Vendor account field always display ' <external> '
    It's strange.. the vendor field it's seem locked by grouping
    What should I do?? 
    ___Company Code Header Data___
    Company Code  :   1000
    Customer          :   <external>
    Vendor              :   <external>
    I need your advise.. thank you very much
    Thanks,
    tweety

    Hi,
    I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
    956054  BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
    This notes describes the changes (new development) of CVI AND the necessary customizing settings.
    In short, CVI is now bidirectional.
    1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
    2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
    Data is changed then synchronoously.
    Further notes that might be of interest.
    851445 BP_CVI: Details about reports to be executed for ERP 2005
    727205 Conversion of industry Customizing in BUPXPRA12
    1077616 Business Partner Upgrade FAQ
    If you have further questions please let me know.
    Regards, Franz

  • How to assign particular PLD format to particular vender or customer

    Hi Friends,
    I have 3 groups of customer and 2 groups of vendor so and my payment terms and PO or Sales order format is different for every group so please help how to I assign particular format to particular vendor or customer

    Hi Naveen,
    As Bala has already said...
    When you click on "Set As Default" button you will land on to a window "Default Template", where you will have the following options:
    1. Set as Defau&lt for All Users
    2. Set as Defa&ult for Current User
    3. Set as Default for Specified Users
    4. Set &as Default for all BPs (for whom a Default Template has not been assigned)
    5. Set as Default for Specified BP
    The last option might work for you. Check and post back.
    Regards,
    Rupa

  • Vender/customer same how  to make a/c payable adjustable.

    In My scenario a vendor sometimes used to be customer. I want to payable to be automatic adjustable against the  any sales to him.
    Regards,
    Amit

    Hi,
    You need to maintain in both Vendor and Customer masters and after assigning the customer code in the vendor master, go to "Payment transactions Accounting".
    Here you will find - Clrg with cust.
    Select the check box next to it.
    Do the same for your vendors too.
    Caio
    Raghu

  • Advance payments vender/customer

    pls send entries of advance payment down payments & advance received from custemors my id is [email protected]

    SAP ERP Financials
    check this forum is for fico
    Edited by: Sikindar on Dec 25, 2007 9:43 AM

  • Custom purchase requsitionto vendor open and cleared payment report

    dear all i develop report but i cant ableto show in that open amount and cleared amount of vender in that report so please see this report and feedback me for logic to show open and clear amount of vendor purchase orderwise or vendorwise
    report zpo_purchase_history no standard page heading message-id 00.
    TABLES : bsik, bsak, lfa1, lfb1, skb1, t001, bapifvdexp_vzzbepp.
    type-pools:slis,ICON.
    types :begin of ty_po,
            banfn type eban-banfn,
            "Purchase Requisition Number
            bnfpo type eban-bnfpo,
            "Item Number of Purchase Requisition
            ekgrp type eban-ekgrp,                 "Purchasing Group
            badat type eban-badat,
            "Requisition (Request) Date
            menge type eban-menge,
            KNTTP TYPE EBAN-KNTTP,
             PSTYP type eban-PSTYP,
            "Purchase Requisition Quantity
            meins type eban-meins,
            "Purchase Requisition Unit of Measure
            lifnr type ekko-lifnr,                 "Vendor Account Number
            bedat type ekko-bedat,                 "Purchasing Document Date
            ebeln type ekpo-ebeln,
            "Purchasing Document Number
            ebelp type ekpo-ebelp,
            "Item Number of Purchasing Document
            matkl type ekpo-matkl,                 "Material Group
            mtart type ekpo-mtart,                 "Material Type
            matnr type ekpo-matnr,                 "Material Number
            txz01 type ekpo-txz01,                 "Short Text
            menge1 type ekpo-menge,                "Purchase Order Quantity
            meins1 type ekpo-meins,
            "Purchase Order Unit of Measure
            balqty type ekpo-menge,                "Balance Quantity
            netpr type ekpo-netpr,
            "Net Price in Purchasing Document
            peinh type ekpo-peinh,                 "Price Unit
            mblnr type mseg-mblnr,
            "Number of Material Document
            zeile type mseg-zeile,                 "Item in Material Document
            menge2 type mseg-menge,                "GR Quantity
            meins2 type mseg-meins,                "GR Unit of Measure
            werks type mseg-werks,                 "Plant
            charg type mseg-charg,                 "Batch
            belnr type rbkp-belnr,
            "Document Number of an Invoice Document
            bldat type ekbe-bldat,                 "Document Date in Document
            belnr_b type rbkp-belnr,
            SHKZG type ekbe-SHKZG ,                "Debit/Credit Indicator
            DMBTR type   bsik-dmbtr,                "Amount in Local Currency
            DMBTR_C type   bsAk-dmbtr,                "Amount in Local Currency
            thick(10) type c,                      "Thickness
            width(10) type c,                      "Width
            length(10) type c,                     "Length
            grade(10) type c,                        "Grade
            BELNR_d type bseg-belnr,
            xblnr type bkpf-xblnr,
            awkey  type bkpf-awkey,
            RMWWR type rbkp-RMWWR,
            WMWST1 type rbkp-WMWST1,
            end of ty_po.
    types :begin of ty_ekko,
            ebeln type ekko-ebeln,
            lifnr type ekko-lifnr,
            bedat type ekko-bedat,
            end of ty_ekko.
    types:begin of ty_ekpo,
            ebeln type ekpo-ebeln,
            ebelp type ekpo-ebelp,
            matnr type ekpo-matnr,
            txz01 type ekpo-txz01,
            menge type ekpo-menge,
            meins type ekpo-meins,
            netpr type ekpo-netpr,
            peinh type ekpo-peinh,
            banfn type ekpo-banfn,
            bnfpo type ekpo-bnfpo,
            mtart type ekpo-mtart,
            end of ty_ekpo.
    types :begin of ty_eban,
            banfn type eban-banfn,
            bnfpo type eban-bnfpo,
            matnr type eban-matnr,
            menge type eban-menge,
            meins type eban-meins,
            end of ty_eban.
    types : begin of ty_ekbe,
             ebeln type ekbe-ebeln,
             ebelp type ekbe-ebelp,
             belnr type ekbe-belnr,
             bldat type ekbe-bldat,
             gjahr type ekbe-gjahr,
             buzei type ekbe-buzei,
             matnr type ekbe-matnr,
             DMBTR type ekbe-dmbtr,
             shkzg type ekbe-shkzg,
             end of ty_ekbe.
    types : begin of ty_mseg,
             mblnr type mseg-mblnr,
             mjahr type mseg-mjahr,
             zeile type mseg-zeile,
             menge type mseg-menge,
             meins type mseg-meins,
             ebeln type mseg-ebeln,
             ebelp type mseg-ebelp,
             matnr type mseg-matnr,
             werks type mseg-werks,
             charg type mseg-charg,
             end of ty_mseg.
    types : begin of ty_rbkp,
             belnr type rbkp-belnr,
             gjahr type rbkp-gjahr,
             bldat type rbkp-bldat,
             lifnr type rbkp-lifnr,
             ZUONR type rbkp-ZUONR,
             RMWWR type rbkp-RMWWR,
             WMWST1 type rbkp-WMWST1,
             end of ty_rbkp.
    types : begin of ty_bseg,
             bukrs type bseg-bukrs,
             belnr type bseg-belnr,
             gjahr type bseg-gjahr,
             buzei type bseg-buzei,
             valut type bseg-valut,
             wrbtr type bseg-wrbtr ,
             augbl type bseg-augbl,
             matnr type bseg-matnr,
             lifnr type bseg-lifnr,
             ebeln type bseg-ebeln,
             end of ty_bseg.
    types : begin of ty_rseg,
             belnr type rseg-belnr,
             gjahr type rseg-gjahr,
             ebeln type rseg-ebeln,
             ebelp type rseg-ebelp,
             matnr type rseg-matnr,
             bukrs type rseg-bukrs,
             end of ty_rseg.
    types : begin of ty_bsik,
             belnr type bsik-belnr,
              buzei type bsik-buzei,
             DMBTR type bsik-DMBTR,
             budat type bsik-budat,
             shkzg type bsik-shkzg,
             ebeln type bsik-ebeln,
             lifnr type bsik-lifnr,
             end of ty_bsik.
    types : begin of ty_bsak,
             belnr type bsak-belnr,
       lifnr type bsak-lifnr,
        ebeln type bsak-ebeln,
             DMBTR_C type bsak-DMBTR,
    ZUONR type bsak-ZUONR,
             end of ty_bsak.
    types: begin of ty_bkpf,
             BELNR type bkpf-belnr,
             xblnr type bkpf-xblnr,
             awkey  type bkpf-awkey,
           end of ty_bkpf.
    data: it_po type standard table of ty_po,
           it_ekko type standard table of ty_ekko,
           it_ekpo type standard table of ty_ekpo,
           it_eban type standard table of ty_eban,
           it_ekbe type standard table of ty_ekbe,
           it_mseg type standard table of ty_mseg,
           it_rbkp type standard table of ty_rbkp,
           it_rseg type standard table of ty_rseg,
           it_bseg type standard table of ty_bseg,
           it_bsik type STANDARD TABLE OF ty_bsik with header line,
           it_bsak type STANDARD TABLE OF ty_bsak,
           it_bkpf type standard table of ty_bkpf,
           wa_po type ty_po,
           wa_ekko type ty_ekko,
           wa_ekpo type ty_ekpo,
           wa_eban type ty_eban,
           wa_mseg type ty_mseg,
           wa_rbkp type ty_rbkp,
           wa_rseg type ty_rseg,
           wa_bseg type ty_bseg,
           wa_ekbe type ty_ekbe,
           wa_bsik type ty_bsik,
           wa_bsak type ty_bsak,
           wa_bkpf type ty_bkpf.
    data: it_fcat type slis_t_fieldcat_alv,
           it_lshead type slis_t_listheader,
           it_sort type slis_t_sortinfo_alv,
           wa_fcat type slis_fieldcat_alv,
           wa_lshead type slis_listheader,
           wa_layout type slis_layout_alv,
           wa_sort type slis_sortinfo_alv.
    data :it_cl_data like table of clobjdat,
           wa_cl_data like clobjdat.
    data: values(10) type n.
    data: value1(4) type N.
    data: c_matkl type ekpo-matkl,
           c_matnr type ekpo-matnr,
           c_ekgrp type eban-ekgrp,
           c_badat type eban-badat,
           c_index type sy-tabix,
           c_grmenge type mseg-erfmg,
           c_low(10) type c,
           c_high(10) type c,
           c_date type string,
           c_bukrs type ekko-bukrs,
           c_WERKS type eban-WERKS.
    data: gd_date(10).
    DATA: V_EVENTS TYPE SLIS_T_EVENT,
           WA_EVENT TYPE SLIS_ALV_EVENT.
    *********Selection screen variables*********
    selection-screen:begin of block b1 with frame title text-001.
    select-options: s_bukrs for c_bukrs DEFAULT  'bmp1',
                     s_WERKS for c_WERKS,
                     s_matnr for c_matnr DEFAULT 'rm-01',
                     s_matkl for c_matkl ,
                     s_badat for c_badat ,"obligatory,
                     s_ekgrp for c_ekgrp.
    parameters: ch_bal as checkbox.
    selection-screen:end of block b1.
    *initialization.
    * PERFORM EVENT_CALL.
    *  PERFORM POPULATE_EVENT.
    start-of-selection.
         PERFORM EVENT_CALL.
       PERFORM POPULATE_EVENT.
       perform getdata.
       perform setdata.
       perform fieldcat.
       perform display.
    *&      Form  GETDATA
    form getdata .
       select a~BANFN
              a~bnfpo
              a~ekgrp
              a~badat
              a~KNTTP
              a~PSTYP
              b~ebeln
              b~ebelp
              b~matkl
              b~matnr
              b~bukrs
              into corresponding fields of table it_po
              from eban as a inner join ekpo as b
              on a~banfn = b~banfn and
                 a~bnfpo = b~bnfpo AND
                 A~KNTTP = B~KNTTP and
                 a~PSTYP = b~PSTYP
              where  a~badat in s_badat and
                     a~ekgrp in s_ekgrp and
                     a~WERKS in s_WERKS and
                     b~matnr in s_matnr and
                     b~matkl in s_matkl and
                     b~bukrs in s_bukrs and
                     b~loekz <> 'L' and
                     a~loekz <> 'X'.
       if it_po[] is not initial.
         select ebeln
                ebelp
                matnr
                txz01
                menge
                meins
                netpr
                peinh
                banfn
                bnfpo
                mtart
                from ekpo into table it_ekpo
                for all entries in it_po
                where ebeln = it_po-ebeln and
                      ebelp = it_po-ebelp and
                      loekz <> 'L'.
         select banfn
                bnfpo
                matnr
                menge
                meins
                from eban into table it_eban
                for all entries in it_po
                where banfn = it_po-banfn and
                      bnfpo = it_po-bnfpo and
                      loekz <> 'X'.
         if it_ekpo[] is not initial.
           select ebeln
                  lifnr
                  bedat
                  from ekko into table it_ekko
                  for all entries in it_ekpo
                  where ebeln = it_ekpo-ebeln.
           select ebeln
                  ebelp
                  belnr
                  bldat
                  gjahr
                  buzei
                  matnr
                  DMBTR
                  shkzg
                  from ekbe into table it_ekbe
                  for all entries in it_ekpo
                  where ebeln = it_ekpo-ebeln and
                        ebelp = it_ekpo-ebelp .
    *if it_ekbe-shkzg = 'H'.
    **ekbe-dmbtr = ekbe-dmbtr * -1.
    **ekbe-menge = ekbe-menge * -1.
    *endif.
    * select belnr
    *             gjahr
    *             ebeln
    *             ebelp
    *     from bseg into table it_bseg
    *             for all entries in it_ekpo
    *             where ebeln = it_ekpo-ebeln and
    *                   ebelp = it_ekpo-ebelp.
           select belnr
                  gjahr
                  ebeln
                  ebelp
                  matnr
                  bukrs
                  from rseg into table it_rseg
                  for all entries in it_ekpo
                  where ebeln = it_ekpo-ebeln and
                        ebelp = it_ekpo-ebelp.
         endif.
         if it_ekbe[] is not initial.
           select mblnr
                  mjahr
                  zeile
                  menge
                  meins
                  ebeln
                  ebelp
                  matnr
                  werks
                  charg
                  from mseg into table it_mseg
                  for all entries in it_ekbe
                  where mblnr = it_ekbe-belnr and
                        mjahr = it_ekbe-gjahr and
                        zeile = it_ekbe-buzei and
                        bwart = '101'.
         endif.
         if it_rseg[] is not initial.
           select belnr
                  gjahr
                  bldat
                  lifnr
                  ZUONR
                  RMWWR
                  WMWST1
                  from rbkp into table it_rbkp
                  for all entries in it_rseg
                  where belnr = it_rseg-belnr.
         endif.
    *if it_rseg[] is not initial.
    *      SELECT bukrs
    *              belnr
    *              gjahr
    *              buzei
    *              valut
    *              wrbtr
    *              augbl
    *              matnr
    *              lifnr
    *              ebeln
    *        INTO TABLE it_bseg
    *          FROM bseg
    *          FOR ALL ENTRIES IN it_rseg
    *          WHERE bukrs = it_rseg-bukrs and ebeln = it_rseg-ebeln and mwskz = ''.
    *endif.
    *loop at it_BKPF into wa_BKPF.
    *  values = wa_rbkp-belnr.
    *  value1 = wa_rbkp-gjahr.
       data: aekey_1 type string .
    *CONCATENATE values value1 into aekey_1.
    *  if it_BSEG[] is not initial.
    *MESSAGE aekey_1 type 'I'.
           SELECT single belnr xblnr awkey into wa_bkpf
             from bkpf
             where awkey = aekey_1.
    SELECT SINGLe belnr
    buzei
    dmbtr
    budat
       shkzg
       ebeln
       lifnr
       FROM bsik
    INTO CORRESPONDING FIELDS OF  wa_bsik
    *FOR ALL ENTRIES IN it_bseg
    WHERE
        bukrs in s_bukrs and
        lifnr = wa_rbkp-lifnr
    and
    *AND gjahr = it_bseg-gjahr
    * AND
        belnr = wa_bkpf-belnr.
    insert wa_bsik into table it_bsik.
    CLEAR wa_bsik.
    CLEAR it_bsik.
    *endloop.
    * and ebeln = it_bseg-ebeln .
    *    select BELNR
    **           SHKZG
    **           DMBTR
    *           from bkpf into table it_bkpf
    *            for ALL ENTRIES IN it_rbkp
    *            where belnr = it_rbkp-belnr.
    *        ENDif.
    IF IT_bseg[] IS NOT INITIAL.
           select belnr
             LIFNR
             ebeln
                  DMBTR
              ZUONR
                  from bsik into table it_bsik
                  for all entries in it_bseg
                  where belnr = it_bseg-belnr.
           select belnr
             LIFNR
             ebeln
                  DMBTR
              ZUONR
                  from bsak into table it_bsak
                  for all entries in it_bseg
                  where belnr = it_bseg-belnr.
    ENDIF.
       else.
         message s002.
         leave list-processing.
       endif.
    endform.                    " GETDATA
    *&      Form  SETDATA
    form setdata .
       clear wa_po.
       loop at it_po into wa_po.
         c_index = sy-tabix.
    ********Calculate PR Quantity**********
         clear wa_eban.
         read table it_eban into wa_eban
                    with key banfn = wa_po-banfn
                             bnfpo = wa_po-bnfpo.
         if sy-subrc eq 0.
           move:wa_eban-menge to wa_po-menge,
                wa_eban-meins to wa_po-meins.
         endif.
    ********Calculate PO Quantity**********
         clear wa_ekpo.
         read table it_ekpo into wa_ekpo
                    with key banfn = wa_po-banfn
                             bnfpo = wa_po-bnfpo .
         if sy-subrc eq 0.
           move:wa_ekpo-txz01 to wa_po-txz01,
                wa_ekpo-netpr to wa_po-netpr,
                wa_ekpo-peinh to wa_po-peinh,
                wa_ekpo-mtart to wa_po-mtart,
                wa_ekpo-menge to wa_po-menge1,
                wa_ekpo-meins to wa_po-meins1.
         endif.
    ********Calculate Balance Quantity******
         clear wa_mseg.
         loop at it_mseg into wa_mseg
                where ebeln = wa_po-ebeln and
                      ebelp = wa_po-ebelp.
           c_grmenge = c_grmenge + wa_mseg-menge.
         endloop.
         move:wa_mseg-mblnr to wa_po-mblnr,
              c_grmenge to wa_po-menge2,
              wa_mseg-meins to wa_po-meins2,
              wa_mseg-werks to wa_po-werks,
              wa_mseg-charg to wa_po-charg.
         wa_po-balqty = wa_eban-menge - c_grmenge.
         clear : wa_rseg,wa_rbkp.
         read table it_rseg into wa_rseg with key
                        ebeln = wa_mseg-ebeln
                        ebelp = wa_mseg-ebelp.
         read table it_rbkp into wa_rbkp
                    with key belnr = wa_rseg-belnr
                             gjahr = wa_rseg-gjahr.
         if sy-subrc eq 0.
           move : wa_rbkp-belnr to wa_po-belnr,
                  wa_rbkp-bldat to wa_po-bldat,
                  wa_rbkp-RMWWR to wa_po-RMWWR,
                  WA_RBKP-WMWST1 TO WA_PO-WMWST1.
         endif.
           read table it_bseg into wa_bseg with key
                         ebeln = wa_rseg-ebeln
                         bukrs = wa_rseg-bukrs.
           if sy-subrc eq 0.
             move wa_bseg-belnr to wa_po-belnr_d.
           endif.
    *    read table it_bkpf into wa_bkpf
    *    with key belnr = wa_ekbe-belnr.
    *    read table it_bseg into wa_bseg
    *    with key belnr = wa_bkpf-belnr.
    CLEAR wa_bsik.
    clear it_bsik.
         read table it_bsik into wa_bsik
         with key belnr = wa_bkpf-belnr.
    *    if wa_bsik-shkzg = 'H'.
    *     wa_bsik-DMBTR = wa_bsik-DMBTR * 1.
    *     endif.
           if sy-subrc eq 0.
             move : wa_bsik-belnr to wa_po-belnr,
                     wa_bsik-DMBTR to wa_po-DMBTR.
            endif.
    *    clear wa_bsik.
    *    read table it_bsik into wa_bsik
    *               with key  belnr = wa_bseg-belnr.
    *    if sy-subrc eq 0.
    *        move : wa_bsik-DMBTR to wa_po-DMBTR.
    *    endif.
    *clear wa_bsak.
    *    read table it_bsak into wa_bsak
    *               with key  belnr = wa_bseg-belnr.
    *    if sy-subrc eq 0.
    *        move : wa_bsak-DMBTR_C to wa_po-DMBTR_C.
    *    endif.
    *clear : wa_rbkp.
    *loop at it_bsik into wa_bsik.
    *read table it_bsik into wa_bsik with key belnr = wa_rbkp-belnr.
    *if sy-subrc eq 0.
    *  move : wa_bsik-DMBTR to wa_po-DMBTR.
    *    endif.
    *endloop.
    *********Assign Vendor,PO Date*********
         clear wa_ekko.
         read table it_ekko into wa_ekko
                    with key ebeln = wa_po-ebeln.
         if sy-subrc eq 0.
           move:wa_ekko-lifnr to wa_po-lifnr,
                wa_ekko-bedat to wa_po-bedat.
         endif.
    *clear wa_ekko.
    *read table it_ekko into wa_ekko
    *with key lifnr = wa_po-lifnr.
    *if sy-subrc eq 0.
    *  move: wa_bsik-DMBTR to wa_po-DMBTR.
    *  endif.
    *    call function 'ZSD_BATCH_CLASSIFICATION_DATA'
    *      exporting
    **        ch_charg                   = wa_po-charg
    *        ch_matnr                   = wa_po-matnr
    *        ch_werks                   = wa_po-werks
    *      tables
    *        cl_data                    = it_cl_data
    **       I_SEL_CHARACTERISTIC       =
         loop at it_cl_data into wa_cl_data.
           if wa_cl_data-ausp1 ne '?'.
             if wa_cl_data-atnam eq 'THICKNESS'.
               move wa_cl_data-ausp1 to wa_po-thick.
             elseif wa_cl_data-atnam eq 'LENGTH'.
               move wa_cl_data-ausp1 to wa_po-length.
             elseif wa_cl_data-atnam eq 'WIDTH'.
               move wa_cl_data-ausp1 to wa_po-width.
             elseif wa_cl_data-atnam eq 'GRADE'.
               move wa_cl_data-ausp1 to wa_po-grade.
             endif.
           endif.
         endloop.
         modify it_po from wa_po index c_index.
         clear :c_grmenge,wa_po,wa_ekpo,wa_mseg,c_index.
       endloop.
    endform.                    " SETDATA
    *&      Form  FIELDCAT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form fieldcat .
       perform buildfields using '1' 'BANFN'  'IT_PO' 'PR Number' '' ''.
    *  perform buildfields using '2' 'BNFPO'  'IT_PO' 'PR Item Number' '' ''.
       perform  buildfields using '2' 'KNTTP' 'IT_PO' 'A/c Assignment Cat' '' ''.
       perform  buildfields using '2' 'PSTYP' 'IT_PO' 'Item Cat' '' ''.
       perform buildfields using '3' 'EKGRP'  'IT_PO' 'Purchase Group' '' ''.
       perform buildfields using '4' 'BADAT'  'IT_PO' 'Request Date' '' ''.
       perform buildfields using '5' 'MENGE'  'IT_PO' 'PR Quantity'  'X' ''.
       perform buildfields using '6' 'MEINS'  'IT_PO' 'PR Unit' '' ''.
       perform buildfields using '7' 'LIFNR'  'IT_PO' 'Vendor Number' '' ''.
       perform buildfields using '8' 'EBELN'  'IT_PO' 'Purchasing Doc No' '' ''  .
       perform buildfields using '9' 'BEDAT'  'IT_PO' 'PO Date' '' ''.
       perform buildfields using '10' 'MTART' 'IT_PO' 'Material Type' '' ''.
       perform buildfields using '11' 'MATKL' 'IT_PO' 'Material Group' '' ''.
       perform buildfields using '12' 'MATNR' 'IT_PO' 'Material Number' '' ''.
       perform buildfields using '13' 'TXZ01' 'IT_PO' 'Material Desc' '' ''.
       perform buildfields using '18' 'MENGE1' 'IT_PO' 'PO Quantity' 'X' ''.
       perform buildfields using '19' 'MEINS' 'IT_PO' 'PO Unit' '' ''.
       perform buildfields using '20' 'NETPR' 'IT_PO' 'Net Price' '' ''.
       perform buildfields using '21' 'PEINH' 'IT_PO' 'Price Unit' '' ''.
       perform buildfields using '22' 'MBLNR' 'IT_PO' 'GR Number' '' ''.
       perform buildfields using '23' 'MENGE2' 'IT_PO' 'GR Quantity' 'X' ''.
       perform buildfields using '24' 'MEINS2' 'IT_PO' 'GR Unit' '' ''.
       perform buildfields using '25' 'BELNR' 'IT_PO' 'Invoice doc. number' '' ''.
       perform buildfields using '26' 'BLDAT' 'IT_PO' 'Invoice Date' '' ''.
    *  perform buildfields using '26' 'BELNR_D' 'IT_POP' 'A/C Doc. No.' '' ''.
    *  perform buildfields using '26' 'AUGBL' 'IT_PO' 'Clearing Doc No.' '' ''.
       perform buildfields using '26' 'DMBTR' 'IT_PO' 'OPEN AMOUNT' '' ''.
      perform buildfields using '26' 'DMBTR' 'IT_PO' 'clear AMOUNT' '' ''.
    *  perform buildfields using '26' 'DMBTR_C' 'IT_PO' 'Clear balance' '' ''.
       if ch_bal = 'X'.
         perform buildfields using '27' 'BALQTY' 'IT_PO' 'Balance Quantity'
         'X' ''.
       endif.
       perform buildfields using '26' 'WMWST1' 'IT_PO' 'TOTAL TAX ADDED' 'X' ''.
       perform buildfields using '26' 'RMWWR' 'IT_PO' 'TOTAL AMOUNT IN INVOICE' 'X' ''.
    endform.                    " FIELDCAT
    *&      Form  BUILDFIELDS
    *       text
    *      -->P_0449   text
    *      -->P_0450   text
    *      -->P_0451   text
    *      -->P_0452   text
    form buildfields  using    value(p_col_pos) like sy-cucol
                                value(p_fldname) type slis_fieldname
                                value(p_tabname) type slis_tabname
                                value(p_reptext) like dd03p-reptext
                                value(p_do_sum) type char1
                                value(hotspot) type char1.
       wa_fcat-col_pos = p_col_pos.
       wa_fcat-fieldname = p_fldname.
       wa_fcat-tabname = p_tabname.
       wa_fcat-reptext_ddic = p_reptext.
       wa_fcat-do_sum = p_do_sum.
       wa_fcat-hotspot = hotspot.
       append wa_fcat to it_fcat.
       clear wa_fcat.
    endform.                    " BUILDFIELDS
    *&      Form  DISPLAY
    form display .
       clear wa_layout.
       wa_layout-zebra = 'X'.
       wa_layout-colwidth_optimize = 'X'.
    * wa_layout-box_fieldname     = 'SEL'.
    * wa_layout-edit = 'X'.
       perform build_sort using 'BANFN' '1' 'X'.
       call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
          i_callback_program               = sy-cprog
    *   I_CALLBACK_PF_STATUS_SET          = ' '
        I_CALLBACK_USER_COMMAND           = 'USER_COMMAND '
          i_callback_top_of_page           = 'TOP_OF_PAGE'
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
        i_background_id                   = 'ALV_BACKGROUND'
    *   I_GRID_TITLE                      =
    *   I_GRID_SETTINGS                   =
          is_layout                        = wa_layout
          it_fieldcat                      = it_fcat
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
         it_sort                           = it_sort
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
        I_SAVE                            = 'A'
    *   IS_VARIANT                        =
    *   IT_EVENTS                         =
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   I_HTML_HEIGHT_TOP                 = 0
    *   I_HTML_HEIGHT_END                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   IR_SALV_FULLSCREEN_ADAPTER        =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
         tables
           t_outtab                          = it_po[]
      exceptions
        program_error                     = 1
        others                            = 2
       if sy-subrc <> 0.
         message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       endif.
    endform.                    " DISPLAY
    *&      Form  top_of_page
    *       text
    form top_of_page.                                           "#EC *
    **********Create report header*********
       refresh it_lshead.
       clear wa_lshead.
    **********To display date in header*********
    *  write: s_badat-low to c_low dd/mm/yyyy,s_badat-high to c_high
    *  dd/mm/yyyy.
    *  if s_badat-high is initial.
    *    concatenate 'Dated on' c_low into c_date separated by space.
    *  else.
    *    concatenate 'Dated between' c_low 'and' c_high into c_date separated
    *    by space.
    *  endif.
       wa_lshead-typ = 'H'.
       wa_lshead-info = 'PR To Payment History'.
    *  'Pending Indents History -

    We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
    There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
    To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
    What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
    Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
    Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
    Hope that makes sense. Let me know if you want clarification.
    /smw

  • List of Discount based on customer

    Olá pessoal,
    Sou novo no mundo SAP SD e estou com algumas dúvidas... vou postar uma das principais aqui...
    Na empresa em que trabalho, o processo funciona da seguinte forma:
    1. Cliente é cadastrado
    2. Ordem de venda (OV) implantada para este cliente com as condições de preço (descontos) definidas manualmente. Mesmo este cliente tendo uma lista de descontos, por família de produtos, aprovada em uma planilha excel.
    3. OV passa pela primeira validação, onde são conferidas todas as questões tributárias, transportadoras e se o mesmo esta dentro da política comercial além de outros.
    4. OV passa pela segunda validação, onde são liberados, ou não, os descontos cedidos ao cliente pelo vendedor.
    Demais passos são desconsiderados nesta situação que preciso ajuda, portanto não vou prosseguir.
    Posto isto, minha dúvida seria em como eliminar o 4º passo, uma vez que este cliente já possui uma lista de descontos definida.
    Gostaria de saber se a solução abaixo é possível, e também se existe outra solução, bem como se somente customizado.
    No cadastro do cliente, gostaria de colocar o desconto que quero aplicar por família de produto.
    Ex.: Higiene = 37% | Alimentação=25% | Bebidas: 5%
    E este cadastro seria aprovado pela direção uma única vez, até que os preços descontos precisem ser ajustados. Eliminando assim o 4º passo e desta forma, os diretores teriam que aprovar o cadastro do cliente e não todos os pedidos deste. Assim, uma OV quando implantada, já sairia com o desconto aplicado por família de acordo com o cadastro do cliente e automaticamente.
    O 4º passo só existiria se caso houvesse uma tratativa especial em que fosse cedido um desconto manual na OV.
    É possível?
    Desde já agradeço.
    Obrigado
    Message was edited by: G Lakshmipathi
    Please ensure to post in English language

    Ok, sorry.
    Hi,
    I'm new in the SAP world and i need a help with one doubts.
    In the company I work, the process works as follows:
    1. Client is registered
    2. Sales Order (SO) registered for this client with the conditions of price (discounts) defined manually. But this client have's a list of discounts, by product family, aproved in an excel spreadsheet
    3 SO passes for the first validation, which conferred all tax issues, carriers and whether it is within the trade policy and others.
    4. SO passes for the second validation, where they are released, or not, the discounts granted to the customer by the seller
    Other steps are disregarded in this situation that i need help, so I will not proceed with they.
    That said, my question would be how to eliminate the 4th step, since this client already has a list of defined discounts.
    I wonder if the solution below is possible, and also if there is another solution, and only if customized.
    In the customer master, I would to inform that discount i want to apply separated by product Family.
    For Example: Hygiene = 37% | Power = 25% | Drinks: 5%
    And this registration will be approved by direction once, until the discounts need to be adjusted. Thus eliminating the 4th step and the directors would have to approve the registration of the client and not all sales orders. Thus, when an SO is registered, would have with the discount applied per family according to the registration of the client and automatically.
    The 4th step only exist if there was a special case in which dealings were given a manual discount on OV.
    Is it possible?
    Tks.

  • RFC - Receber chamada do R/3 ao gravar VENDA

    Caros,
    Sou novato nas tecnologias SAP e estou em um projeto para desenvolvimento da integração "Payment Card Interface to R/3".
    Estamos desenvolvendo com o SAP Java Connector 3 e a princípio já tenho o meu JCOServer executando e conectado no sistema de testes (acessando a transação SM59 e testando a conexão TCP/IP, com nome de programa registrado).
    Pois bem, conforme a documentação da integração, entende-se que ao gravar uma Ordem de Venda (VA01) o sistema R/3 disparará uma chamada para o meu RFC Server fornecendo as tabelas de autorização CCAUT. Pelo que consta na também na documentação, esse chamada se dá através da execução da função SD_CCARD_AUTH_CALL_RFC.
    Então, fiz alguns testes e gravei algumas ordens, porém não obtive nenhuma atividade no meu handler que aguarda uma execução do R/3.
    Gostaria de saber se:
    - Preciso fazer alguma configuração no R/3 para que "chame" pelo nome do meu programa ? (A única configuração que fiz no SAP foi em SM59)
    - Preciso fazer alguma alteração específica para execução da função SD_CCARD_AUTH_CALL_RFC ? Se sim, qual ?
    - O sistema já tem o comportamento padrão de executar esta função ao gravar uma ordem de venda ?
    - Existe alguma forma de identificar se o R/3 está tentando "chamar" o meu RFC Server ?
    Qualquer ajuda que puderem me enviar será bem vinda...
    Cumprimentos,
    Rodrigo F. Santana

    Olá Arthur,
    Então, pelo que estou lendo tenho que acessar a seguinte opção:
    In Customizing for Sales and Distribution, choose Billing ® Payment cards ® Authorization and settlement® Maintain clearing house ® Set authorization/settlement control per account "
    Estou retirando essa informação do link abaixo:
    Payment Card Interface to Clearing Houses - Payment Card Processing (SD-BIL-IV) - SAP Library
    Porém, ao acessar o menu Vendas e Distribuição >> Faturamento, não existe a opção de Cartões de Pagamento.
    Você saberia me dizer onde tenho que acessar no sistema para entrar nessa opções de Customizing ?
    Grato pela ajuda.

  • Clearing with customer & Vendor

    I have customer who is vendor and vendor who is customer.I have assigned customer no in vendor master and vice versa. I forgot to click the indication Clearing with cust/vend. I have posted the TRansactions now i Have ticked the Clearing with cust/ Vend.
    How to i Set off line item with cust and vendor .
    One more thing is in f-32 clear customer we can clear clearing doc. or we can clear open item also and sett off customer and vendor.
    As per my knowledge if u do partial payment then my orginal Invoice wil show as open item and one more line item wil b generated with clearing document M I right? Is there any setting in ECC 6. through which partial payment will directly get cleared.
    plz need some input regardin clearing doucment
    I have tried but unable to come to conclusion
    thanks thanks a lot
    Regards
    Anamika

    Anamika
    The whole logic of having a partial item is that the open item will remain open until the whole amount is paid. There is no meaning in clearing it completely when there is a partial clearing. For the customer clearing, you select other accounts, select the vendor account and the account type K and clear the open items. Let me know if it helped.
    Karthik

  • Clearing between customer and vendor invoice with F110 transaction

    Hello,
    I have an issue related to the functionalities of the transaction F110.
    I'd like to clear the vendor invoice with the custome invoice.
    Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
    Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
    I entered in both the invoice the same payment method (outgoing payment method).
    The error that I can see in the proposal log is related to the customer invoice and is:
    Payment method selection for items due now to the amount of USD          500,00
    Due items with currency USD, pmnt method  - items total is > 0
    ..none of the payment methods defined can be used for these items
    information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
    .. payment not possible because of reported error
    According to the log of the proposal the vendor invoice can be paid.
    If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
    No pymt possible because items with a debit
    Following the settings of the payment method used:
    Payment method in the country
    - Payment method for outgoing payment selected
    - Bank transf. selected
    - allowed for personal payment flagged
    - Bank details flagged
    - Document type for payment XX
    - clearing document type XX
    - Use classic payment medium program selected
    Currency allowed: This table is empty (will mean that all currencies are permitted)
    Payment method in company code
    Minimum amount: 0,01
    Maximum amount: 9.999.999.999,99
    Distribution amnt: 0,00
    Single paymentfor marked item selected
    Foreign business partner allowed selected
    foreign currency allowed selected
    Cust/vend bank abroad allowed? selected
    Bank selection control "No optimization" selected
    Can you please help me to understand the error?
    I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
    Thank you very much in advance
    Kind R

    Hello,
    I have an issue related to the functionalities of the transaction F110.
    I'd like to clear the vendor invoice with the custome invoice.
    Customer and vendor records are linked properly and the flag 'Clrg with Cust.' is set on vendor and 'Clearing with Vendor' is set on customer.
    Both the invoice are in USD and the amount in document currency of the vendor invoice is > of the amount in document currency of the customer invoice.
    I entered in both the invoices the same payment method (outgoing payment method).
    The error that I can see in the proposal log is related to the customer invoice and is:
    Payment method selection for items due now to the amount of USD          500,00
    Due items with currency USD, pmnt method  - items total is > 0
    ..none of the payment methods defined can be used for these items
    information re. vendor xxxxxxxx / customer yyyyyyy / paying company code TS01 ...
    .. payment not possible because of reported error
    According to the log of the proposal the vendor invoice can be paid.
    If I click on display proposal and double click on the customer invoice (with red light) I can read the note:
    No pymt possible because items with a debit bal.still exist; see job log
    Following the settings of the payment method used:
    Payment method in the country
    - Payment method for outgoing payment selected
    - Bank transf. selected
    - allowed for personal payment flagged
    - Bank details flagged
    - Document type for payment XX
    - clearing document type XX
    - Use classic payment medium program selected
    Currency allowed: This table is empty (will mean that all currencies are permitted)
    Payment method in company codeMinimum amount: 0,01
    Maximum amount: 9.999.999.999,99
    Distribution amnt: 0,00
    Single paymentfor marked item selected
    Foreign business partner allowed selected
    foreign currency allowed selected
    Cust/vend bank abroad allowed? selected
    Bank selection control "No optimization" selected
    Can you please help me to understand the error?
    I'm afraid it is a problem with the bank but I don't understand why the payment of the vendor invoice is allowed and the customer invoice not.
    Thank you very much in advance
    Kind Regards
    Emanuela

Maybe you are looking for