Customisable Presentation

Hi Everyone
I'd like to create a company presentation using Flash Catalyst and deliver as a standalone application (AIR) to run from a user's computer. Using Flash Catalyst would make creating the interface and interactions/animations really fast and easy.
I would like the presentation to customisable by the presenter at some point before their presentation. For instance, missing out certain (skipping) sections (pages) or configuring certain other options (maybe available states of components etc)
Ideally this configuration would be done via a menu/options screen. (Possibly a separate app that writes to a DB or XML if need be)
I was thinking that this kind of functionality may have to be applied to the Flash Catalyst Project via Flash Builder - which would be ok. My question is, is this kind of programmatic control of a Catalyst project (and components within it) possible?
Does anyone know if this is achievable? or have any advice/workflow suggestions?
Thanks for any help or direction you can give.
J

Hi Tanya
Thanks for replying.
Once the Catalyst file is imported into Flash Builder, do you know if edits be made in Catalyst again without loosing the work done in Flash Builder?
I have seen a few discussions about this, but many refer to the Beta versions of Catalyst.
Thanks

Similar Messages

Keynote dissolves non-functional

I have a long, long list of broken actions and missing functions with this 'new' version of Keynote.
However, to keep it as brief as possible:
In Mavericks, Keynote previews dissolves fine. On play they are non-functional. Completely and utterly broken;
Delays of 0.5 sec on preview turn into 10 seconds on play;
Audio is now out of sequence;
I have been a Keynote evangelist over Powerpoint since the first iteration. Taught many people to use it well. But right now, this version is not a professional product, barely an anateur product, since it has thelook and feel of an Alpha release.
So my question: how can I go back to Keynote '09?

Thanks.... I read that a while back. However, six months is a long time to be without a professional tool such as this. I cannot imagine what the programmers were thinking as they sent this out for beta testing. There is no way this was a considered release. It had to have been rushed. And badly.
For example: Build markers appear to be missing; 'ready to advance' cannot be found; and the 'customise presenter display' isn't there; even the 'open existing presentation' button, on app launch is gone. Seriously?
Since I wrote my earlier post, I've tested 6.0.1 further. It also apparently freezes [and requires a force quit] when you attempt to update from an older version and resave.
The release of a redesigned Keynote for Mavericks with this level of non-functionality is problematic at best and shockingly bad from Apple. I use this application a lot. A lot. And I think this is the worst update/redesign release I can ever remember from Apple.... and they've released some stinkers.
And they're going to take up to SIX months to fix this shambles? Good grief!! What a mess.

Customise your Windows XP install CD

If you currently only own a legit Windows XP Home or Pro CD, which is either original or SP1a integrated, when it comes to doing a new install or a repair install, having to reinstall SP2 again can be a bit of a pain, not to mention another lengthy procedure
So why not make yourself an updated XP SP2 disc, so at least if you have to reinstall Windows, you can reinstall to the latest version without any further messing.
The "slipstreaming" procedure, also allows you to integrate additional drivers and hotfixes, so they are all present when you do a new install.
Here are some links that allow you to customise and create your own XP install CD. Note that you will still need a valid Product Key to install any version of Windows XP, and you will also require a genuine Windows XP install CD.
Please note that the MSI Forum is not responsible for the content of external links; links are provided for reference only. If you need any help, or want to ask questions then please start a new topic. MSI Forum also does not advocate the use of illegally obtained software; any references or links to illegal versions of Windows will be removed.
TheElderGeek - How to slipstream SP2 to your XP CD
WindowsITPro - Updating Drivers in a Slipstream Installation
Nlite - create a custom XP install CD
AutoStreamer - slipstreaming made easier!
MSFN - Unattended XP CD Guide

I personally have built a DVD with the MSFN how to guide. The actual XP build was very easy when using the Microsot tool "setupmgr.exe" (MS Setup Manager for XP). The product nLite worked well also.
But before I go on I should tell everyone that wants to try this to go get a copy of VMware Workstation http://www.vmware.com. It will cost you a good amout but it will save so much time and energy. Before you install it though yo best have a pc strong enough for the task. I found a Pentium 4 w/HT and a Pentium D to wrk just fine when you also tack on 3 or more GB's of RAM.
I should warn all that the next parts may burn a hole in your head.
My WinXP Pro SP2 was also complimented with a complete unattended install of every program I wanted installed on my PC. Usng Batch coding and RunOnceX commands was very hard and very time consuming. It took me almost 4 months to learn how to use those and it never really paid off. I then found a program called "Windows-Post Installer". You cn find it at http://www.wpiw.net/. That program made it so much easier and I could tell myself what programs do, before I install them, via descriptions. When you look at the site you will see what I mean.
OK, let's get real down and dirty. "SWITCHES", my own personal demons. I found it so frustrating that a switch would work on one version of software and one version of WPI but not work on mine. I had to learn what one meant, set it up, and then test. I then found some switches to not work correctly in a vurtual enviroment. Lord save me from myself, PLEASE .
All of this is explained in much detail at the MSFN how-to http://unattended.msfn.org/unattended.xp/view/web/1/. They have updated alot of there information since I pull my hair out. So read on peoples for the only one that can help you is reading this right now, that does not in anyway shape or form mean ME, lol!

Can we transport BW templates present in SRM to New BW system

Hello All,
We have activated all the web templates related to SRM in our BW system.
Our requirement is to run customised BW templates which are present in SRM system in BW system.
Can we transport all the BW templates present in SRM system to BW system.
BW templates are pressent in
SPRO - SRM - SRM Server - Cross Application Basic settings - Define logical system and template names for BW reports.
1. Bidder History
2. Vendor evaluation
3. price comparison
4. detailed bid comparison with attributes
Is there any possibility of activating or transporting the above reports in the separate BW system.
Thanks in advance.
Cheers!
Ravi

Solved

Customisation of SAP-B1

hi all,
iam new in SAP B1-2005 ,here we started Customisation of SAPB1 my modules are like thisie
1.)Purchasing A/P ->
1.1)Goods Receipt P.O -->Step1)In this i had to modify the Menu Item to be changed as "Material Inward Receipt"(Requirement).
Step2)"Qty Accepted" and "Qty Rejected" fields are to be added after "Quantity" field.
Step3) "Qty Accepted" is to be update in the stock table instead of "Quantity".i had doubt regarding this requirement how is it possible update this field.But, in checked in this Database their is no such like table(stock) in SBODemo_India can u tell me where it is Find.
1.2)Purchase Order-->step1)Presently "Delivery date" field is in the main form ie it belongs to POR1(table) how can i shift this field to grid Can u suggest me which code i have to get where i had to modify in Code. Mainly we are doing only for Maintanence one code ie i am too hard to where to modify in that predefined code.
1.2)Purchase Orde (New Requirement)-->Auto generation of Purchase Order. If the Stock for any "Item" falls below the minimum level, a Purchase Order to be generated on the name of the "Supplier" who narmally supplies those items.
1.3)Purchase Order - Report-->step1) we have to modify the report regarding the Client supplied the format. we have to modify in that format.Can u suggest which report tables ie predefined tables to change the extra fields to get.
Regards
anand

Hi Anand,
1. Goods Receipt P.O
Go to Administration -->System Initialization -->Document Numering --> Click Change Name --> You can very few menu item names. One of that is Goods Receipt P.O
2. Change the name of existing Quantity field as Quantity Accepted by use Ctr+double click. Add user defined field for other fields. Use the formated search for calculations.
3. Delivery date field: I am able to get your thread
4. Purchase order report: By using Print layout designer you can achieve this.
I hope this will help you.
Venkatesan G.

Upgrade from 4.6 to ECC 6.0 -- can we upload customisation tasks

Hi,
Presently we have two SAP instances.
One in 4.6 version and another in 4.0B now we are consolidating these two instances into a single SAP instance into version 6.0.
Here my problem is can we upload the customisation taks into the new version.
Let me not confuse you, please have a look at the example
In 4.6version instance we have 250 House bank accounts & in 4.0b 600 house bank accounts.
In the new upgraded system, which is a combination of these two, literally we have to manually create 850 house bank accounts.
I know that this data will be residing in table T012K.
Is there any way that i can download this task and upload in the ECC 6.0 version with some uploading tools like LSMW / BDC.....
This is one of the customisation task which is involved apart from that there are many....
Can any one suggest if there is a way around, in order to evade in not creating them manually.
Appreciate your immediate response.
Regards,
Kalyan

The problem you will face is, that the table structures and dependent tables are different on source and target system. You may be able to download them using LSMW, modify the download and "upload" to the ERP 6.0 system but I doubt, that you will be able to do that without having a in-depth look on all objects you want to transfer.
What you could do is downloading the data (for each object) of both systems into an excel file, adjust them (merge them) and then create an LSMW to upload. However, this will be a lot of work.
It would be much easier, if you would copy both systems to a separate system, upgrade both to ERP 6.0 and then, having the same structure on both systems, merge them.
Markus

Customisation SAPB1-2005

hi all,
iam new in SAP B1-2005 ,here we started Customisation of SAPB1 my modules are like thisie
1.)Purchasing A/P ->
1.1)Goods Receipt P.O -->Step1)In this i had to modify the Menu Item to be changed as "Material Inward Receipt"(Requirement).
Where iam confusing that like when i press the in sapb1 present main menu ie Menu item-"2036"-Goods Receipt P.O its event message is comming but,that Menu item name is not Changing i return my code like this
SBO_Application.Menus.Item("").String = "&Material Inward Receipt" is this correct way or n't?? plz respond this Requirement asap with Clear information??
Regards
ANAND

hi anand,
Do one thing, go to "Goods Receipt P.O "
perss control and double click...
u can change the label. this is easiest way..
if satisfied reward points...
nirdesh

Cash Flow Documentation (Customisation Needed)

Dear Gurus,
Cash Flow customisation documentation needed.
Kindly provide links.
If you need email, specify.
Thanks..
Points available.

Hello Bhatia,
Not sure of your exact requirement. If the system is producing Balance sheet & PNL report at present, you can develop the basic simple cash flow report with less effort.
Regards...

Upgrading standard XI contents with customised mappings

Hi
I've successfuliy done the integration of IS-RETAIL , POSDM. and SAP POS with XI
Standard XI contents are used for this integration.
I've customised the standard XI contents as per our Client requirement.
Now i want to upgrade the standard XI contents...Store connectivity...with the latest available version...
What will happen to my customised mappings?
How to retain my customised mappings while upgrading the standatd XI contents...?
.....Abhijit

U dont have to delete ur existing maps. After the import of latest version, it won't overwrite the existing SWC (make sure that the versions are different). By default, u will have both the SWC present. U may continue using some old components.
Regards,
Prateek

Adding primary field to a customised table and maintaining records for it

Hi all ..
I want to enhance one customised table which has got five colomns at present , with one more column ( basically a field which is a primary key ) and that too at the begining( ie. the first field of the table )
The records in the table can be maintained by the transaction code SM30.
When I am inserting the specific field in the table by going to the transaction code SE11, and activating it then that field is not reflected in the transaction code SM30 because of which I am not able to maintain records in the table.
So now when I go to SE16 to see the records of that table , I am left with the same table with a blank new field at the begining of every record.
I would be glad if someone tells me how can I maintain those fields by goin to the transaction code SM30 so that in future also we can easily maintain the records in that table through transaction code SM30.
I hope I have made myself clear.
Thanx

Hi subhash,
1. goto se54.
2. type the table name
3. press delete button (to delete the full table maintanance screens and prorams)
4. Again Create new
   (This will take care to include
    the latest fields which are there in the table)
5. Anytime we make a change to the TABLE
(either data type, or adding columns
or deleting columns etc,)
   WE SHOULD TAKE CARE TO
RE-GENERATE THE TABLE MAINTANENCE
(other wise it may give error in sm30)
regards,
amit m.

Create a button similar like "Copy To" button in A/P Invoice in Customised

I have created a customised form using SDK and want to create a "Copy To" present in A/P Invoice Form for copying data from one customised form to another customised form .Is it possible to create that button using SDK .

Amit Sharma
This question should be asked in category SAP Business One SDK session

ESS - custom Customising object not correctly handled by WDJ.

Hi experts,
I have customised 2 ESS scenario (J2EE 7.0 SP18; BP_ERP5ESS 1.0 SP13 and SAP-HR 6.0 lev 29)::
- the first one using standard Header, Area Group, Area, SubArea, Service and Resources
- the second one creating each of those by copy (Z....)
Everything is ok, except for the links and the buttons present in the AllMyTrips WDJ.
Using HTTP-Watch I saw that all parameters points to the SAP obj (Header, Area Group, Area, SubArea, Service and Resources) and not tho the custom one (Z*).
Where am I wrong? Have I to specify those params in all the iViews? have I to use the URL Parameters in the Resources (SPRO)?
I can't understand how the system ABAP and/or Java determine the Header, Area Group, Area, SubArea, Service and Resources. At iViews level only in the Area iView are set the parms (e.g. the Overview has sap.xss.menuargrp=ZITA_SAPDEFAULTESS_ERP2005&sap.xss.menuhdr=ZITA_SAPDEFAULT).
Thanks a lot.
Andrea

Thank Pramod for your response.
Yes, I've this situation in SPRO
- Header : ZITA_SAPDEFAULT
- Area group pages : ZITA_SAPDEFAULTESS_ERP2005
- Area Pager assigned to the above Area Group : ZITA_EMPLOYEE_TRAVEL_ERP2005
Everythig work well:
- creation of Travel request all the Post/Query-string parameter are ok
- creation of Expense Report from scratch ... ok
- if I go to the AllMyTrips WDJ and I chose a link , for ex."Create Travel Expense Report", from the table () the param I can see in the query-string are referred to the Standard object :
- sap.xss.tra.TripSchema=01&
- sap.xss.menuhdr=SAPDEFAULT&
- sap.xss.menusrv=EMPLOYEE_TRAVEL_EXPENSEREPORT05&
- sap.xss.tra.TripNo=4000000058&
- sap-tray-padding=X&
- sap.xss.tra.ExitService=EMPLOYEE_TRAVEL_ALLMYTRIPS05&
- sap-tray-type=PLAIN
I've tried to set the Appl. Parameter for the AllMyTrips iview:
sap.xss.menuhdr=ZITA_SAPDEFAULT&sap.xss.menuargrp=ZITA_SAPDEFAULTESS_ERP2005&sap.xss.menusrv=ZITA_EMPLOYEE_TRAVEL_ALLMYTRIPS05
the result is that now the Querystring is
- sap.xss.tra.TripSchema=01&
- sap.xss.menuhdr=ZITA_SAPDEFAULT&
- sap.xss.menusrv=EMPLOYEE_TRAVEL_EXPENSEREPORT05&
- sap.xss.menuargrp=ZITA_SAPDEFAULTESS_ERP2005&
- sap.xss.tra.TripNo=4000000058&
- sap-tray-padding=X&
- sap.xss.tra.ExitService=EMPLOYEE_TRAVEL_ALLMYTRIPS05&
- sap-tray-type=PLAIN
At the end the effect is that the Resources load is the standard one EMPLOYEE_TRAVEL_EXPENSES_SRV05 and this is pointing to PDC = ROLE://....... standard and not the one I have defined.
Now I'm triing to debug WDJ to understand the process that determine those params. I don'l know if is ABAP or Java.
Have you any suggestions?
Many thanks.

How to customise portal favourites iView

Hi,
Could you please let me know the name of par file for favourites iView in portal. I need to customise this iView.
Thanks,
ksk

com.sap.km.cm.navigation.par.bak
this is the Portal Favorites iView related PAR which presents you option for adding internal or extrernal links. I hope you are talking about this one only?
Regards,
Shubhadip

How to Customise Menu Clock...?

Hello all, an "age old question" if you may...
How do I or how can I customise the Menu Bar Clock to show the Date too besides the now "default" Day and Time?
...and I don't want to "resort" to using a Shareware or something...
Thanks and cheers

Just for information, this technique may cause unwanted, duplicate, and/or sometimes truncated date/time entries in some windows. One example that I can cite is in System Preferences>.mac>Sync window where I am presented with "Last Sync: 11/14/05 Nov 14, 2005"
;~)

Presentation issues - URGENT

I am desperately trying to prepare Portal for a test client and am struggling with some presentation issues:
1. I want to remove the customise tags from everywhere in the users portal. How do I do this?
2. I have granted access to sub-folders within my admin folder to the end user - they still see the admin folder (although it is empty when you click through logged on as that user) - how do I prevent this (I granted access to the sub-folders and the user is not a common member of any groups). I am now stumped on this one...
3. I want to remove the hyperlink based folder navigation from all my content areas that the client sees.
TIA
James

Sorry - another one for the pot -
Also want to take the "General" link off the folder...

Customisable Presentation

Similar Messages

Maybe you are looking for