Customization of VO.xml files

Hi,
I have an issue with JDeveloper (Studio Edition Version 11.1.1.6.4) when I try to customize VO.xml files (I try on PersonNameGlobalVO.xml and PersonSearchVO.xml).
From the "Overview" view, I try to add an attribute and modify a view criteria but the result is the same. JDeveloper takes 100% of my CPU and then freezes. After few minutes it crashes with a out of memory error (8 GB available in my environment) and writes some jrockit_****.hprof files each of 1 GB (the stack is available below). I am able to edit attributes from the "Source" view using the "Property Inspector" but I can't create something with this workaround.
Is this a known issue? Any suggestion for that?
Aug 14, 2013 12:36:14 PM sun.awt.X11.XToolkit processException
WARNING: Exception on Toolkit thread
java.lang.OutOfMemoryError: getNewTla
at sun.awt.X11.XEvent.get_xproperty(XEvent.java:64)
at sun.awt.X11.XDropTargetEventProcessor.doProcessEvent(XDropTargetEventProcessor.java:42)
at sun.awt.X11.XDropTargetEventProcessor.processEvent(XDropTargetEventProcessor.java:106)
at sun.awt.X11.XToolkit.run(XToolkit.java:588)
at sun.awt.X11.XToolkit.run(XToolkit.java:543)
at java.lang.Thread.run(Thread.java:662)
Uncaught exception
java.lang.OutOfMemoryError: getNewTla
at java.util.logging.SimpleFormatter.format(SimpleFormatter.java:42)
at oracle.ideimpl.log.TabbedLogManager$3.run(TabbedLogManager.java:288)
at java.lang.Thread.run(Thread.java:662)
Uncaught exception
java.lang.OutOfMemoryError: allocLargeObjectOrArray: [C, size 16400
at java.io.BufferedWriter.<init>(BufferedWriter.java:87)
at java.io.BufferedWriter.<init>(BufferedWriter.java:70)
at java.io.PrintStream.init(PrintStream.java:83)
at java.io.PrintStream.<init>(PrintStream.java:125)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:397)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:530)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:234)
at sun.net.www.http.HttpClient.New(HttpClient.java:307)
at sun.net.www.http.HttpClient.New(HttpClient.java:324)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:970)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:911)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:836)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1014)
at sun.print.CUPSPrinter$1.run(CUPSPrinter.java:227)
at sun.print.CUPSPrinter.getDefaultPrinter(CUPSPrinter.java:223)
at sun.print.UnixPrintServiceLookup.getDefaultPrintService(UnixPrintServiceLookup.java:506)
at sun.print.UnixPrintServiceLookup.refreshServices(UnixPrintServiceLookup.java:186)
at sun.print.UnixPrintServiceLookup$PrinterChangeListener.run(UnixPrintServiceLookup.java:734)
Uncaught exception
java.lang.OutOfMemoryError: getNewTla
at java.util.concurrent.locks.AbstractQueuedSynchronizer.addWaiter(AbstractQueuedSynchronizer.java:584)
at java.util.concurrent.locks.AbstractQueuedSynchronizer.acquire(AbstractQueuedSynchronizer.java:1178)
at java.util.concurrent.locks.ReentrantLock$NonfairSync.lock(ReentrantLock.java:186)
at java.util.concurrent.locks.ReentrantLock.lock(ReentrantLock.java:262)
at sun.awt.SunToolkit.awtLock(SunToolkit.java:234)
at sun.awt.X11.UnsafeXDisposerRecord.dispose(UnsafeXDisposerRecord.java:41)
at sun.java2d.Disposer.run(Disposer.java:130)
at java.lang.Thread.run(Thread.java:662)
Uncaught exception
java.lang.OutOfMemoryError
Aug 14, 2013 12:43:34 PM sun.awt.X11.XToolkit processException
WARNING: Exception on Toolkit thread
java.lang.OutOfMemoryError
Uncaught exception
java.lang.OutOfMemoryError: getNewTla
at java.util.logging.Logger.log(Logger.java:587)
at sun.awt.X11.XToolkit.processException(XToolkit.java:535)
at sun.awt.X11.XToolkit.run(XToolkit.java:625)
at sun.awt.X11.XToolkit.run(XToolkit.java:543)
at java.lang.Thread.run(Thread.java:662)

Hi Sébastien,
Actually, you should NOT use Jrockit for the IDE or its integrated WLS. It is meant to be used by the standalone WLS only that the Fusion Apps installer provisions (or that you create if you install standalone WLS on your workstation).
This blog post explains how to switch JDKs (in short, it tells you to reinstall JDevelopef and point it to the desired JDK).
https://blogs.oracle.com/fadevrel/entry/switching_jdks_for_jdeveloper_wls
The JDeveloper download on eDelivery comes with its own JDK, but unfortunately it's the 32 bit version since it is a generic Fusion Middleware installer, but we need the 64 bit version for Fusion Apps, which you need to download separately before downloading JDeveloper. We hope to simplify this in a future version.
Hope this helps, but don't hesitate to ask for clarifications.
Thanks,
Oliver

Similar Messages

Customization with 2 xml files

Hi guys,
I trie to customize a report using 2 xml files (+CUSTOMIZE="(C:REPORT\statement.xml, C:REPORT\FR\statement.xml)"), but the report server always returns : ERROR: XML definition failed to parse!
And when I launch the report with only one of the xml files, there is no problem...
Is it the correct syntax : +CUSTOMIZE="(xml1, xml2)" ?
Are there rules for the using of severals xml files ?
Thanks a lot
Best regards
David
null

Hi Sébastien,
Actually, you should NOT use Jrockit for the IDE or its integrated WLS. It is meant to be used by the standalone WLS only that the Fusion Apps installer provisions (or that you create if you install standalone WLS on your workstation).
This blog post explains how to switch JDKs (in short, it tells you to reinstall JDevelopef and point it to the desired JDK).
https://blogs.oracle.com/fadevrel/entry/switching_jdks_for_jdeveloper_wls
The JDeveloper download on eDelivery comes with its own JDK, but unfortunately it's the 32 bit version since it is a generic Fusion Middleware installer, but we need the 64 bit version for Fusion Apps, which you need to download separately before downloading JDeveloper. We hope to simplify this in a future version.
Hope this helps, but don't hesitate to ask for clarifications.
Thanks,
Oliver

How to customize the XML file name from user entered field value when submitting

How can I customize the name of an HTTP submitted XML file from data entered by the user in a text field?
The field in question contains user identification information and would ease the sorting of files received for easy identification.
Thank you,

How can I customize the name of an HTTP submitted XML file from data entered by the user in a text field?
The field in question contains user identification information and would ease the sorting of files received for easy identification.
Thank you,

Create a Purchase order using the BAPI using the data in the XML file.

Hello Gurus,
here is the scenario can anyone help me how to proceed explaining the procedure?
Create a Purchase order using the BAPI using the data in the XML file.
comprehensive explanations are appreciated.
thanks in advance.

hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

XML File for "Print Quote"

Hi,
Since we'r doing a customization on the Seeded "Print Quote", Is there any possible way to retrieve the XML file (Source file) for the "Print Quote"?
Thanks in advance,
Muru

Muru,
I too have the same requirement of customising the quote report.
Could you please let me know which approach u are taking, i mean customising the RDF report and its template or the xsl-fo template.
As far as I have understood from the docs, we can either customise the ASOPQTEL.rdf and its layout or customize the seeded xsl-fo ie, ASOPRINT.xsl.
Just an idea, probably you can run the ASOPQTEL.rdf and take the xml output.
Satrajit

Error while Importing ResourceObject xml file in Deployment Manager

Hi Everyone,
I am getting this error while doing Import of HRPeopleSoftResourceObjects.xml ( A Resource Object xml file) in Deployment Manager. I am doing this step for Authoritative(Trusted Source) Reconciliation.
Error Says:- Attribute not present in EntityDefination of User :: ExpectedReturnDate.
ExpectedReturnDate is a UDF (Customize) field. I did Metadata and Sandbox import for this field to create this attribute in OIM. I can see this attribute on User Details screen as well as in User Table in OIM. So, ideally this error should not popup. I have to do this import for Reconciliation.
I pulled and checked all the xml files like(UserEO.xml.xml, userEO.xml.xml, userVO.xml, UserVO.xml.xml) from oracle.iam.console.identity.self-service.ear_V2.0_metadata1 and found ExpectedReturnDate field is available.
I am using: OIM Version - Oracle 11g Release 2
Database version - 11.2.0
Weblogic version - 10.3
Please let me know how to resolve this error.
Appreciate your response and support!
Warm Regards
Vijay Kumar

Appreciate your response Kevin!
I saw your response today. What you have suggested in your post make perfect sense to me.
Yesterday, I was able to create Reconciliation profile successfully. No idea how it worked so, didn't updated my post.
I tried to re-import the UDF, noticed ExpectedReturnDate attribute has little icon in fornt of it on deployment manager screen which says on mouse over "new field". No idea why as I didn't delete it from anywhere, perhaps it didn't get imported properly previously. I stepped ahead and clicked the import button on deployment manager but failed as it was throwing an exception which says udf_usr_expectedReturnDate is available in usr table. That makes sense to me as this column got created in usr table in OIM because of previous import and I didn't delete it either. This raised couple of doubts more as, along with this attribute there were other attributes in the same metadata xml file which were part of previous import and their respective columns were already created in usr table. Then why message poped-up for this field in particular? Anyway I went ahead with the import process.
Now I stopped all the server (Admin, SOA and OIM) and restarted them again and performed the same steps as mentioned above and this time it worked as expected. UDF file got imported successfully.
After this I went to Design Console verified all the fields and created the Reconciliation Profile. I checked OIM database and found RA_ProfileName recon tables got created.
As per your comment, Today I checked the RECON_USER_OLDSTATE table but this table is empty.
Still I have couple of doubts, if Reconciliation Profile got created it should create the xml file under metadata direcectory(in my case path should be: /apps/Oracle/Middleware/Oracle_IDM1/server/metadata/db). Please correct me if I am wrong? I hope it should be physical file not a logical file.
Once again thanks for your response!
Warm Regards
Vijay Kumar

Creating xml file from fields of a fmb

Hi,
What i want to do is to create a "generic" button (which can work for all forms of my application) which ables the application to create a xml file completed with all fields on my form. The matter is that i can't know by advance all fields of my 1100 forms!
Is there a solution?
Kind regards
PS: i have forms6 but soon forms10
PS2: sorry for my poor english

Hello,
It is easy to loop through all items of a form.
Have a look at the Dynamic Color Customization white paper on OTN. get the sources code and study the COLOR.PLL functions.
http://www.oracle.com/technology/products/forms/pdf/10g/community_colors.zip
Francois

XML file in Unix Server

Hi Guys,
I have a requirement to use an XML File as a data source, and the XML is made available in the Unix server where the agent is running. In ODI on my Windows machine, testing the connection of the XML “Data Server”, I get a successful test connection, and a DTD is created on the working directory (whenever it is missing). This means that, I do have access to write files in the working directory of Unix server.
However, the problem is encountered when I reverse engineer the XML to retrieve the structure of the file (located in Unix server) and make it in a datastore. It seems that during the “Reverse Engineer” process, ODI is using the local agent rather than J2EE agent (Unix server) that I have, thus it can’t “see” file, thus the error message: "ODI-40844: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory."
Unfortunately, I am not able to customize the Reverse Engineering process to use J2EE agent as there is no out of the box ODI Reverse Knowledge Modules for XMLs. Creating the structure (Datastore) of the XML manually in ODI under XML Technology does not solve the problem either, because ODI still sees the Datastore as a FILE Technology and not an XML Technology (Error: ODI-40426: Url must start with jdbc:snps:dbfile).
Please advise on how to reverse engineer a remote xml file. TIA.

Hi,
What I have done in the past, and seems to work, is execute an Interface or Procedure in simulate mode, choosing the agent that you would like to use in reverse engineering the XML. Then, attempt to reverse engineer the file again. Not sure if this will work, but it has for me at times. You might also try this and restarting ODI to clear out anything 'cached' in the JVM.
It seems ODI is caching the agent that you are using - but I'm not sure how to properly change it.
Regards,
Michael Rainey

Changing xwork-community-custom.xml file in Forums Application

Hi,
could someone give me details on how to customize the file xwork-community-custom.xml, to override actions defined in xwork-community.xml?
My problem in detail:
I want to delete the "My questions" area in profile view, because we don´t have a "question scenario" in our company.
As it is no jsp file, that i can directly change, but a ftl file that is included in the forums.jar file I want to override the actions "profile" and "edit-profile", which are included in xwork-community.xml, so that I dont´t have to change the jar file directly . The file now looks like that:
<xwork>
    <package name="custom-actions" extends="webwork-default">
     <action name="profile" class="com.jivesoftware.profiles.action.ViewProfile">
            <result name="success" type="freemarker">myfile.ftl</result>
        </action>
        <action name="edit-profile" class="com.jivesoftware.profiles.action.EditProfile">
            <result name="cancel" type="redirect">profile.jspa?editMode=true&userID=${targetUser.ID}</result>
            <result name="input" type="freemarker">myfile.ftl</result>
            <result name="success" type="redirect">profile.jspa?editMode=true&userID=${targetUser.ID}</result>
        </action>
    </package>
</xwork>
For that I copied this two actions in "xwork-community-custom.xml" and now want to change the value for e.g.
"/templates folder.
What do I have to write in the xml to reference to this file? In jive forum s.o. wrote to write only the the file name as reference and that this has the effect that ftl file fromtheme folder is taken, but that didn´t work.
I tried nearly everything but it has no effect. I also restarted server etc.
Every other change was no problem, and even if i place a ftl file in themes folder which has the same name as as JSP file the framework tries to render the ftl file, but in the other case no chance.
Could someone please give a tip, how i can do my changes?
Many thanks
Best regards
Alex

for all who want to get a little bit deeper in Jive application, than configuring things with admin console....solution was the following:
- look for ftl file in xwork-community.xml file, which is responsible for the specific action (in my case cp-tabs.ftl)
- look for the path of the original ftl file in jiveforums-<version>.jar
- extract ftl file you want to modify and do your changes
- have a look into ..../com.sap.netweaver.coll.forums/servlet_jsp/forums/root/template if the path specified in jar file already exists (normally not). If not create folder structure. In my case I had to create forums/include
- put the customized file into the new folder
- restart application server
--> "my questions" area in profile is gone
Regards
Alex

How to set customized wallpaper using MDT unattended.xml file

hello
I need to set own wallpaper with OSD using MDT.
I have edited the unattended.xml file as added below component to it, other customization with answer file worked except not getting set the wallpaper set and wallpaper image is available at specified location.Please help to resolved this issue.
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Themes>
<DesktopBackground>\\MDTSERVER\DeploymentShare$\pics\images.jpeg</DesktopBackground>
<ThemeName>\\MDTSERVER\DeploymentShare$\pics\images.jpeg</ThemeName>
<ScreenSaver></ScreenSaver>
</Themes>
</component>
</settings>

Putting the JAR files in WEB-INF/lib and using the standard URIs in the taglib directives are all that's needed; the container locates the TLDs in the JAR files at startup.
If this doesn't work, it's a bug in the container. You may want to upgrade to a later version of Tomcat; 4.0.6 is ancient, and may very well be buggy in this area.

Dynamically building web content using XML file(s)

Hello All!
I was recently tasked with a project to design a monitoring web application for our "in-house" built web applications. There is a certain set of modules and parameters that we need to monitor: GSLB --> Web Tier --> App Tier --> Database.
Almost all (80%) of our applications share the same parameters that need to be monitored, but there are about a hundred of them. So here is what I'm thinking of doing....
1. Create an XML document for each application (An example layout is included at the end of this post) and save it in the Applications directory.
2. Setup a Spring Framework project, and create code to dynamically go through the Applications directory and kick-off the monitoring logic for each <application/> item. Basically, the code will just traverse through all of the xml files (I might even create just 1 xml file with all of the <application/> items in it), read the "metadata" for each application, and start the backend processing, as well as display the data in a dynamically-generated web GUI (based on the XML structure and data).
Again, most of our applications (80%) have the same modules/parameters, therefore adding an application would only require us adding another <application/> element to the already-existing xml document (or adding an additional XML document). The code would do the rest...In regards to the rest 20% of applications, I would create a customize XML document with additional metadata (the code, in that case, would be able to handle the additional metadata).
So here are my questions:
1. What do you think of the idea itself? I'm sure that I'm not the only one who's thought of this, so are there any best-practices in this regard?
2. The reason I thought of using Spring is that it is XML-based (there are many reasons for me using Spring actually -- Security, ORM integration, etc), and it might facilitate my efforts. I'm thinking that even if reading through the Applications directory isn't such a good idea, I can somehow utilize Spring's dependency injection & AOS to create the appropriate solution. Have anybody tried this before and willing to share ideas, implementation approach, etc?
3. Other than Spring, what might help me accomplish this task?
4. Is this feasible (from a time and effort stand-point), or should I just do it the old-fashioned way?
Thanks in advance!
Vladimir
I am including a sample (very rough-draft) XML file of what the input might look like:
     <applications>
          <application name="Remote Application">
               <vip>somethingUNIQUE.mycompany.com</vip>
               <sys-level>LAB</sys-level>
               <lb-type>GTM</lb-type>
               <farms>
                    <farm name="Farm 1" id="1">
                         <member-name>sslname.mycompany</member-name>
                         <ip-address>34.34.24.242</ip-address>
                         <application-servers>
                              <application-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </application-server>
                              <application-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                              <application-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                         </application-servers>
                         <web-servers>
                              <web-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                         </web-servers>
                    </farm>
                    <farm name="Farm 2" id="2">
                         <member-name>sslvpn01.downingtown</member-name>
                         <ip-address>34.34.24.250</ip-address>
                         <application-servers>
                              <application-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                         </application-servers>
                         <web-servers>
                              <web-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                         </web-servers>
                    </farm>
               </farms>
          </application>
          <application name="Tech Tools">
               <vip>technicalUNIQUE.tools.mycompany.com</vip>
               <sys-level>LAB</sys-level>
               <lb-type>GTM</lb-type>
               <farms>
                    <farm name="Farm 1" id="1">
                         <member-name>tools.tech</member-name>
                         <ip-address>34.34.24.214</ip-address>
                         <application-servers>
                              <application-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                              <application-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                         </application-servers>
                         <web-servers>
                              <web-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                         </web-servers>
                    </farm>
                    <farm name="Farm 2" id="2">
                         <member-name>tools.tech222</member-name>
                         <ip-address>34.34.24.415</ip-address>
                         <application-servers>
                              <application-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </application-server>
                              <application-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                              <application-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </application-server>
                         </application-servers>
                         <web-servers>
                              <web-server name="Some Name1">
                                   <ip-address>
                                        34.983.238.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 2222">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                              <web-server name="Some Name 3425">
                                   <ip-address>
                                        34.343.248.32
                                   </ip-address>
                              </web-server>
                         </web-servers>
                    </farm>
               </farms>
          </application>
     </applications>

Hello jschell!
Again, the question was more about the overall architecture and design rather than monitoring implementation.
So here is what I have now:
1. A spring application that will do the following:
Read in the "architecture.xml" file (a portion is shown below). This file will dictate not only the type of monitoring but also the layout (explained later).
The architecture.xml is marshalled to entity objects -- Model (s), with nested Model "children"
This array of Model(s) is what the server-side application will use to populate the monitoring parameters.
When the Impl gets a hold of the Model(s), it traverses through all of these entities and does whatever processing it needs to do (Health check, routing check, etc), and produces Item(s) objects, which are similar in structure to the Model(s) entities, but have actual values that need to be displayed on the front-end. Each item might have an array of other, children, Item(s)
2. A GWT application asks for the Items array, and displays them on the front-end.
What I did already:
*1. Created a base Spring project that accepts GWT requests and returns a set of Item(s) (statically-generated, since I don't have the proper Impl yet).*
*2. Created the GWT project and the layout. GWT communicates with the Spring app (which runs on tomcat for now) and upon retrieving the Item(s) it recursively renders them into displayable items, with different background, borders colors, width, etc (based on the populated values and their nested children, if any) . The last code snippet is the definition of the Item class.*
Basically, the architecture is setup and the next step is the actual implementation of the monitoring and routing logic -- which wasn't the point of this post, since I already did most of it for a different project :)
Thanks for the replies though....
Vladimir
<serviceView name="YYYYYYYY XXXX">
     <item layout="vertical">
          
          <item name="Routing XXXXXXX (RX)"/>
          
          <item name="RX GSLB - xxxxxxx.xx.xxxxxxxx.com" layout="vertical">
               <dynamicText type="gslb_farms">
                    <param name="vip" value="xxxxxxxx.xx.xxxxxxxxx.com"/>
               </dynamicText>
          </item>
          
          <item layout="horizontal">
               
               <item name="Farm 1" layout="vertical">
                    <operationalState name="xxxxxxx.xx.yyyyyyy.com" type="gslb_farm">
                         <param name="vip" value="activate.g.comcast.com"/>
                         <param name="farmName" value="RX.WT.F1.VIP">
                    </operationalState>
                    <hc name="RX.WT.F1.VIP" type="poller"/>
                    
                    <item name="PDX" value="PDX"/>
                    
                    <item layout="horizontal">
                         <item name="WEB1" description="WEB1" detailedView="someservice_level_xmlname.xml">
                              <hc name="RE.WT.F1.rdw01" type="poller"/>
                         </item>
                         <item name="WEB2">
                              <hc name="RE.WT.F1.rdw02" type="poller"/>
                         </item>
                    </item>
public class Item implements Serializable{
     private static final long serialVersionUID = 1L;
     public final static String _ROUTING_STATUS_ENABLED = "_ROUTING_STATUS_ENABLED";
     public final static String _ROUTING_STATUS_DISABLED = "_ROUTING_STATUS_DISABLED";
     public final static String _ROUTING_STATUS_UNKNOWN = "_ROUTING_STATUS_UNKNOWN";
     public final static String _HEALTH_STATUS_GOOD = "_HEALTH_STATUS_GOOD";
     public final static String _HEALTH_STATUS_BAD = "_HEALTH_STATUS_BAD";
     public final static String _HEALTH_STATUS_UNKNOWN = "_HEALTH_STATUS_UNKNOWN";
     // This is what will be printed out -- the static text
     private String name = null;
     // If detailedView is not empty, then a link for this item shows up
     // that opens up a Dialogue Box
     private String detailedView = null;
     // If detailedView is not empty, then a link for this item shows up
     // that opens up a completely new Service View
     private String serviceView = null;
     // Layout Information
     private boolean verticalLayout = true; // VERTICAL or HORIZONTAL
     // Coloring Information
     private String routingStatus = _ROUTING_STATUS_UNKNOWN; // ENABLED, DISABLED, UNKNOWN
     private String healthStatus = _HEALTH_STATUS_UNKNOWN; // HEALTHY or NOT-HEALTHY
     // Children
     private Item children[] = null;

Error message in adf-faces-config.xml file in myEclipse

hello,
i'm trying to customize appearance of my JSF/ADF Faces app (which worked fine until now), and tried to insert a adf-faces-config.xml file in my WEB-INF directory, this is it (copied from a tutorial) :
<?xml version="1.0"?>
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/view/faces/config">

<debug-output>true</debug-output>

<accessibility-mode>#{user.accessibilityMode}</accessibility-mode>


<skin-family>
#{view.locale.language=='en' ? 'minimal' : 'oracle'}
</skin-family>
</adf-faces-config>
after saving the file (in myEclipse) i get the following error message on the second line :
cvc-elt.1 : Cannot find the declaration of element 'adf-faces-config'
what does that mean and what should i do ?
thx...

hello,
i'm trying to customize appearance of my JSF/ADF
Faces app (which worked fine until now), and tried to
insert a adf-faces-config.xml file in my WEB-INF
directory, this is it (copied from a tutorial) :
<?xml version="1.0"?>
<adf-faces-config
xmlns="http://xmlns.oracle.com/adf/view/faces/config">

<debug-output>true</debug-output>

<accessibility-mode>#{user.accessibilityMode}</accessi
bility-mode>


<skin-family>
#{view.locale.language=='en' ? 'minimal' : 'oracle'}
</skin-family>
</adf-faces-config>
after saving the file (in myEclipse) i get the
following error message on the second line :
cvc-elt.1 : Cannot find the declaration of element
'adf-faces-config'
what does that mean and what should i do ?
thx...Hello again,
i'm still stuck with this, could somebody PLEASE give me a hint ?
thx,
dom.

How to merge portlet.xml file from shared libraries into an EAR application

Hi all
I need some help
I have some applications as shared-libs referenced by weblogic.xml into a EAR application.
To see all portlets from that shared-libs, I'm creating a portlet.xml into the EAR application with all portlets from all shared libs. But is terrible for me. I would like to have it merged automatically without having to create it in the EAR application. Is that possible?
Regards
Bruno

In the documentation, I saw this text:
Overriding Shared J2EE Library Settings in the web.xml File
At runtime, the web.xml files in all the shared J2EE libraries are merged, along with the web.xml
file in your portal web project. The content of your WEB-INF/web.xml file overrides anything in
the shared J2EE libraries, so if you want to change particular settings, you can do it there.
There are many other files for which file contents are merged; these can be overridden in the same
way. These files include not only WEB-INF/web.xml but also WEB-INF/weblogic.xml and any
files mentioned in weblogic-extension.xml from either the users' application or the shared
libraries.
It seems to be possible to customize the weblogic-extension.xml. But I haven't seen how to do that
What do you think about it?
Regards
Bruno

Error in retrieving and parsing XML File

Hi Folks
I am Working on People centric user interface, While i am custimizing a application in Business application Builder i am getting this error
" Error in retrieving and parsing XML File "
can any body look on this and give me the solution
it will be rewarded
Regards
M.S.Kumar

Hello,
As mentionned by SAP_TECH, avoid to use the BAB.
Go to CRMC_BLUEPRINT_C and use the different option in the menu to customize the field group, toolbar group, events, ...
Use the PCUI cookbook to find your way.
Regards,
Fred

Read Xml file for Sender and Receiver Info

Hi
Is it possible to customize B2B to read Sender/Receiver/Document Information from the xml file which is supposed to be transmitted?
I do NOT the option to specify this information in channel configuration under file name since file name will not have this information.
But I am fine with writing any plug to set this information somewhere to achieve the same.
Regards
Punit

For outbound transactions, file name is the only option available currently if you are using Generic File internal listening channel. You may use any other transport like JMS/AQ/Fabric and partner and document information can be set in headers.
Can you let us know the complete use case?
Regards,
Anuj

Customization of VO.xml files

Similar Messages

Maybe you are looking for