Customized delta data source for deleting data record in the source system.

Hello Gurus,
there is a customized delta data source, how to implement delta function for deleting data record in the source system?
I mean if there is record deleted in the source sytem, how to notify SAP BW system for this deleting change by this customized delta
data source?
Many thanks.

Hi,
when ever record deleted we need to write the code to insert the record in Z table load this records into BW in a cube with similar structure.while loading into this cube multiply the Keyfigure by -1.
add this cube in the Multi Provider.The union of the records in the orginal cube and the cube having deleted records will result in zero vale and will not be displayed in report .
Regards,

Similar Messages

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

2-3 things to watch out for when SAP is the source for a Data Warehouse

Hello
What are 2-3 things to watch out for when SAP is the source for a Data Warehouse (Informatica for ETL and Cognos for reporting)?
Thanks
G. Vijay

Going through some or all of this might help:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464
Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.220
208.67.220.222
Click on Apply Now and close the window.
Restart Safari, and repair permissions.

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Data Type field read only in Data source for transaction data (PC_FILE)

Hi folks,
I need to change Data Type for some of the fields in "Field" tab in data source for transactional data. It became read only after I activate the data source. Need help in making it editable. All fields now have Data type=CHAR.
Thanks

Nevermind folks. I got it.

Problem in data sources for transaction data through flat file

Hello Friends,
While creating the data sources for transaction data through flat file, I am getting the following error "Error 'The argument '1519,05' cannot be interpreted as anumber' while assigning character to application structure" Message no. RSDS016
If any one come across this issue, please provide me the solution.
Thanks in Advance.
Regards
Ravi

Hallo,
just for information.
I had the same problem.
Have changed the field type from CURR to DEC and have set external instead of internal.
Then, the import with flatfile worked fine.
Thank you.

Data source for this data connection isn't registered for Power BI

Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db. How do I register my connection to the data source? Is this a fix on SQL server or Power BI?
FAILURE INFORMATION
Failure
Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
Data connection Status
SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
Thanks for your help.

I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
Thanks
Fabian
In case it helps this is the actual error:
Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211
Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
doesn't seem to like the data the Gateway is sending back to server.
The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
The request took 00:00:00.0000105 seconds.
Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940

Master Data Required for 2LIS_02_HDR Data Source Installation

Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
Aditya

Hi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK

Is their any function module for deleting condition record i am trying

Hi Experts,
Is their any function module for deleting condition record i am trying this way.......
DATA: TABLE (4) TYPE C.
DATA: KNUM LIKE KONH-KNUMH
DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
DATA: T681_STR LIKE T681.
DATA: LV_NUM TYPE I.
GET PARAMETERS
PARAMETERS: TABNO LIKE T681-KOTABNR.
PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
REFRESH INT_KNUMH.
Select single * from T681 into T681_STR
where kvewe = K_VEWE AND
KOTABNR = TABNO.
IF SY-SUBRC NE 0.
WRITE: / 'No entry in T681 for number ', TABNO.
WRITE: / 'Check whether corresponding condition table exists.'.
EXIT.
ENDIF.
TABLE = T681_STR-KOTAB.
SELECT KNUMH FROM (TABLE) INTO KNUM.
SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
IF SY-SUBRC NE 0.
INT_KNUMH-KNUMH = KNUM.
COLLECT INT_KNUMH.
ENDIF.
ENDSELECT.
DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
IF LV_NUM EQ 0.
WRITE: / 'No inconsistent entries found.'.
WRITE: / 'Each record in the condition table has a corresponding.'.
WRITE: / 'entry in the KONH table.'.
EXIT.
ENDIF.
LOOP AT INT_KNUMH.
IF TESTMODE IS INITIAL.
DELETE FROM (TABLE) WHERE
KNUMH = INT_KNUMH-KNUMH.
IF SY-SUBRC = 0.
WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
ELSE.
WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
WRITE: INT_KNUMH-KNUMH(10).
ENDIF.
ELSE.
WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
ENDIF.
ENDLOOP.
is their any Standerd Function module for comparing tables if the condition record not exist in it has to exit if it is their then compare those two tables if not exist in one table also that has to be delete the condition record
Please let me know .....

Hi,
You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
Regards
Kiran Sure

ODI package - how to watch for delete of records in a table

Hello,
Using ODI package, I am using ODIWaitForData on a table. This works for Inserts/Update, but what do I need to do in a package to do Change Data Capture for Delete?
Thank you.

If your data store is in CDC and you are setting the property named Journalized data only at the interface level then you can set the IKM property named synchronous_jrn_delete . It will take care of the delete operation .

Date range for key date in hierarchy

Dear Friends,
Is there a work around for single key date restriction for time dependent hierarchy.Bcos i can only select one key date in teh report for my hierarchy so that it will take that hierarchy which falls in this date and display the result accordingly.
But is there a way to select the date range for key date so that more than one hierarchy can be used to display my report accrding to the time range.
Say,i have 4 hierarchies (time dependent) like v1,v2,v3,v4 and v5 for jan 08,feb 08,mar 08,apr 08 & may 08 respectively.
In my report,i want to display the result for the time interval say mar to May.
So my report should diplay the result according to the 3 different hierarchies for the time period i.e.v3,v4&v5.
How do i acheive this.
Thanks.
ragu

Hi
I think we may do with the Char with text with replecement path.
take time char as Calmonth and set the offet value as -1 and -2 and design the report and use the hierarchies in that query.
Am not surt it willwork but better to try with this.

Dynamic PL/SQL for Deletion of Records

Dear all,
I am using Dynamic PL/SQL for Deletion of Records,In that PL/SQL, i have to get the no.of records deleted and send a report with the no.of rows deleted.
Please help me on this..
Thanks,
Murugesan

Hi,
Try this:
SQL> SELECT * FROM T;
DT              CODE
14-FEB-07          1
14-FEB-07          1
14-FEB-07          1
14-FEB-07          2
14-FEB-07          2
SQL>
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2    EXECUTE IMMEDIATE ' DELETE FROM T WHERE CODE = 1';
3    DBMS_OUTPUT.PUT_LINE(' Total Deleted Rows :'||SQL%ROWCOUNT);
4* END;
SQL> /
Total Deleted Rows :3
PL/SQL procedure successfully completed.
SQL> Regards
Avinash

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY WUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ??

I HAVE A SOURCE TABLE WITH 10 RECORDS AND TARGET TABLE 15 RECORDS. MY QUESTION IS USING WITH THE TABLE COMPARISON TRANSFORM .I WANT TO DELETE UNMATCHED RECORDS FROM THE TARGET TABLE ?? HOW IT IS ??

Hi Kishore,
First identify deleted records by selecting "Detect deleted rows from comparison table" feature in Table Comparison
Then Use Map Operation with Input row type as "delete" and output row type as "delete" to delete records from target table.

How to delete a record in the target?

Hi all,
In my source i'm having three tables which are joined.My source and target is oracle.
I'm using IKM incremental update oracle.For SCD-1.If i delete a record in any of my source tables i cannot able to delete that particular
record in the target table.I tried by doing CDC(simple) to all my source tables.But still i cannot able to delete a record in the target table.
How to resolve this issue? Please help me.
Thanks in advance

Open your interface, go to the "flow" tab and then, try to set the option "delete_all" to "Yes". Doing it, all records will be deleted in the target table and only the records that still exists at source will be loaded the next time you run the interface.
I hope this will help with your issue.
Regards,
Daniel Hein

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

Customized delta data source for deleting data record in the source system.

Similar Messages

Maybe you are looking for