Customizing PST error message in Outlook

Hi
Does anybody know if it is possible to customize error messages in Outlook?
In our Exchange 2013 Server/Outlook 2013/2007 environment we have the following GPO setting
applied:
User configuration\Policies\Administrative Templates\Classic
Administrative Templates\Microosoft Office Outlook 2007\Miscellaneous\PST
Settings=> Prevent users from adding new content to existing PST
files.
For the Outlook user this prevents him/her from transferring
items into their PST folder. If the user tries to do so, then the following
error message is displayed:
"Cannot move the items. you don't have
appropriate permission to perform this operation"
Is there a method by
which this error message be customized? (that means to personalize the wording
of the message to suit our organizaton)
Many thanks in advance

"Cannot move the items. you don't have
appropriate permission to perform this operation"
Is there a method by
which this error message be customized? (that means to personalize the wording
of the message to suit our organizaton)
No, not to my knowledge.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

why does the error message "Microsoft Outlook must be closed because an error occurred" keep coming up?

Reboot the machine.

TS4062 I keep getting the error message "apple outlook DAV has stopped working"

My phone and I pad all of the sudden just stopped syncing with my desktop. I have had my phone for over a year when 4s first came out and everything was syncing fine. Then all the sudden it stopped. I keep getting the error message "apple outlook DAV has stopped working". I have rebooted, checked for duplicates, signed in and out of the cloud and still nothing. Has anyone had this problem and know of a good way to handle it. Also, now my phone and Ipad don't sync with the cloud either. Please help.

Windows 7 Professional. I meant that when I open a word doc and want to turn it into a PDF, i get the same error message. In the mean time I paid the $40.00 and spoke to Adobe and after 40 minutes, they re-installed Reader X instead of XI so now it works but I am not overly thrilled that I had to pay for it.

Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

Hi All,
I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
Could anyone help me out on how to resolve this? I do not know where to begin even.
Thanks!!
Cheers!

Hi Eugene,
Thanks for the reply.
I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
I would assume the problem is with that file, as no other clients are having any issue like this.
Have you come across this error message? Do you know what sort of scenario could be responsible for it?
Or would I have to file it under "random problems generated by network PSTs"? :P
Cheers!

Why custom logon error messages doesn't work in WAS 7.0, EP 7.0?

I managed to get custom error messages in WAS 6.40 / EP 6.0.
I'm using JAAS custom Login module for user authentication and from there different Login Exceptions are thrown.
I have modified logon.par file to display different error messages like "Logon ID is empty", "Password is empty", "Your user ID or password could not be validated. Please check and try again."
When i copy the same code into my working environment i.e WAS 7.0 / EP 7.0, it doesn't work, message always was "User Authentication Failed". Do anyone knows the reason why i was like that?
Can you please explain exactly when the custom login module gets executed after the user clicks on "Logon" Button.
In logon.par file i have not seen any code to execute JAAS - custom logon module. PLease explain exact execution flow ..
Thanks in advance ..
MMK

Your card reader might be finicky like mine. Figure out which device your card reader is at (from what I'm reading probably sdb), then attempt to mount /dev/sdb to any location. If your card reader is like mine, this mount will fail but you'll find you now magically have /dev/sdb1, /dev/sdb2, etc devices, which will successfully mount... oddness, but it "just works" so I'm happy
Note that if you plug a card into a slot that is to the kernel, for example, /dev/sda2, then try to mount /dev/sda1, this will (obviously) fail, so be sure to try mounting all the devices that magically appear (if any do).
-dav7

Keeping getting error message on outlook for mac

since changing my account today from me.com to icloud i keep getting an error message on my imac and mb-pro
does anyone know what settings need to changed on outlook to be able to send and receive my me.com email?
Worked perfectly since changing over earlier today.
The message is
https://www.icloud.com/#mail
Mail could not be received at this time.
Account name: "Me"
any ideas???

you can't use icloud and outlook 2011 / Entourage 2008 for Mac. The app is not supported. Maximum is Mail via IMAP, but no contacts,tasks,reminders will work.
icloud works only fully with Apple Mac Lion built-in apps : ical, Mail, adress book.
On a Windows-PC, Outlook is a complete different story and there it works with icloud.

Help with "The end of file was reached" error message in Outlook 2011

Hello, I am having an issue with Outlook 2011 that after 24 hours or so I am getting a “The end of file was reached” error message code -17895.
Right after this error I get a disconnected from Exchange server and even after re opening the client it stays like this for about 5 minutes then restores. Has anyone else seen this error? I am able to reproduce this on multiple machines with multiple Exchange
2010 mailbox accounts.

Same situation here:
Outlook 2011 for Mac using Office 365, 3 users have reported the End of File Reached error when trying to send email.
I have logged a ticket with Microsoft support and they have followed up with the following directions.
1.
Repair Disc Permissions On A Mac
o
1
Log in to your computer with the administrative account. Open the hard drive, go into the "Applications" folder and then open the "Utilities" folder. Now launch the Disc Utility application.
o
2
Select your main hard drive. You'll probably see two options--one is the manufacturer's name of the disc and the other name is what you've called it. Choose the name of your hard drive.
o
3
Click on "Verify Disc Permissions" and the computer will perform a diagnostic test. After a few minutes, the problems with disk permissions will be reported in the Disc Utility window.
Click on "Repair Disc Permissions" to fix them.
o
4
Insert your Mac OS X installation disk and restart your computer. Hold down the "C" key on your keyboard to boot from the disk rather than your computer's hard drive. Cancel the OS
installation and open Disc Utility.
o
5
Click on "Verify" to have Disc Utility check your computer's hardware. Notice that this option is only available when the program is run from the CD. You can only test the hardware
of a computer that isn't running the program locally.
o
6
Use Disc Utility to try and repair any hardware errors that it detects. Usually fixing the permissions will be enough to maintain your computer. If you still experience frequent lockups
and crashes, then you should try repairing it with this method.
Tips & Warnings
If you use your computer for high-performance work, such as software compiling or video editing, then you may want to check the permissions weekly. Most computer users will only need
to fix permissions after noticing problems with applications or the operating system.
If the computer's performance does not improve after repairing permissions, then you'll have to troubleshoot for other issues. You may want to purchase more RAM for your computer to
help speed it up.
Permissions repairs will not correct problems caused by applications that did not use Apple's installer. Try deleting all files associated with the application and then reinstalling
it.
Avoid repairing the permissions after you've booted the computer from the OS X CD. It won't cause problems to your drive, but the version of "Disc Utility" on the CD may not be updated
to address permission changes that are required by certain software updates.
Secondly, the information for repairing an Outlook 2011 database is as follows:
http://support.microsoft.com/kb/2360509

Fpga debug using simulated IO via custom VI - error message

I have an PXIe-7966R with MXI interface to Win7-64/LV2013-32bit. The setup is working. VI's can execute on FPGA target.
I want to debug an FPGA vi on the host computer using simulated IO via custom VI. I try to follow the tutorial in LabVIEW Help: Tutorial: Creating Test Benches (FPGA Module). Have made the custom test vi and the "inverter.vi", and set the proper simulated execution mode.
When running the "inverter.vi" (FPGA target but for now simulate on host) I get this error message dialog:
Execution already in progress
Another FPGA VI for this target is already executing on the development computer. Stop the other VI before running this vi.
I can't see where I could stop this other fpga vi. In fact I can't find this other vi at all. Here is the project, which can't be any simpler:
Any hints are welcome.
Solved!
Go to Solution.

thanks for your quick reply.
I tried restart LV and sure enough this changed things. Now I get this error
which could make sense as the IO simulation VI (simTb.vi in my project) is not tested (can't do that without the fpga target under test). This is shown in part below. Note that it is the auto generated template from fpga simulation setup dialog.
and here is the fancy fpga target vi under test (yes i try to make life easy:-))
So no host vi for communication with fpga - just the simualtion test bench.
Ok, I will work on from here and try to fix the error reported. Although I dont se any reason why it reports that its not supported to write to "IO Module\TTL Out Enable 1"
But clearly a restart made a diffence.

When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!

To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085

Customer master error message

Hi,
We recently upgraded ECC 5.0 server from support pack 13 to 19 (SAP_APPL). After that when we wanted to display/change the master data for customer in XD02, it has started giving the message "Field KNVV-CHSPL does not exist in field status tables (TMOD)" .*
This feild is missing from tables TMOD* and when we add this feild to tables the message goes away and is replaced with new message for another feild. On comparison with servers which are not upgraded , there is difference in the number of entries for few tables and the feilds are actually missing. These are SAP standard tables and we could not find notes to correct this.
Any pointers on this front are welcome.
Regards
Alhad

Hi,
I had raised an OSS message for this error and i got following reply. This solved the issue. We added three feilds in table TMODU.
Regards
Alhad
Dear Alhad,
I checked now the problem in your system.
Please insert the following entry in table tmodu with a report like
this:
REPORT Z_INSERT_TMODU .
TABLES: TMODU.
tmodu-FAUNA = 'T077D-FAUSV'.
tmodu-MODIF = '018'.
tmodu-TABNM = 'KNVV'.
tmodu-FELDN = 'CHSPL'.
tmodu-KOART = 'D'.
tmodu-UMSKS = ' '.
tmodu-XRELE = ' '.
clear TMODU.
INSERT INTO TMODU VALUES TMODU.
TABLES: TMODU.
tmodu-FAUNA = 'T077K-FAUSA'.
tmodu-MODIF = '040'.
tmodu-TABNM = 'KNVK'.
tmodu-FELDN = 'NAME1'.
tmodu-KOART = 'K'.
tmodu-UMSKS = ' '.
tmodu-XRELE = ' '.
INSERT INTO TMODU VALUES TMODU.
clear TMODU.
tmodu-FAUNA = 'T077D-FAUSA'.
tmodu-MODIF = '040'.
tmodu-TABNM = 'KNVK'.
tmodu-FELDN = 'NAME1'.
tmodu-KOART = 'D'.
tmodu-UMSKS = ' '.
tmodu-XRELE = ' '.
INSERT INTO TMODU VALUES TMODU.
We are just creating a note for this but it is still in process.
The note number will be: 1164920.

HT4436 I GET A SYNC ERROR MESSAGE WITH OUTLOOK

I CAN NOT SYNC WITH MY OUTLOOK INSTALLED IN MY LAPTOP RUNNING WINDOWS 7 I GET THE FOLLOWING MESSAGE:
Task 'Synchronizing subscribed folders for *********.' reported error (0x800CCC0E) : 'Outlook cannot synchronize subscribed folders for***********. Error: Cannot connect to the server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
ANY SOLUTIONS?
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
(For anyone trying to answer this question - the email was an @me.com one so he does have an iCloud account, provided he migrated from MobileMe)

Customizing the Error Message

          hi ,
          i want to customize the "ERROR 404 File found". how to do it ??
          Thanks& Regards
          Anand.R


http://e-docs.bea.com/wls/docs61/webapp/web_xml.html#1017571
          Anand.R <[email protected]> wrote:
          > hi ,
          > i want to customize the "ERROR 404 File found". how to do it ??
          > Thanks& Regards
          > Anand.R
          Dimitri

Custom Error Messages

I've read numerous posts and blog entries regarding customizing oracle error messages to provide a more user friendly output. However, I have a slightly different scenario here that I'm hoping for some help on.
I'm building a new application that sits on an existing database. Within the database there are thousands of tables and triggers containing validation that raise application errors for messages we've created, for example raise_aplication_error(-20101,'SSL-01010'). In a separate table we have a list of our error codes and messages. In forms we have a function that picks up our code from the error message and translates to our message which is then displayed to the user. I need to do something similar in APEX.
I've created a very simple test table, trigger and page that generates an error when you try to update or delete it. And I've created a customer error page (page 200) to display the user friendly message. I'd like to populate an item on this page with our error code if it's there.
In the Error Page Template section of the template I added the following code which searches for SSL or QMS in the message:
<input type="hidden" value="#MESSAGE#" id="P0_ERRMSG"></input>
<script type="text/javascript">
str=document.getElementById("P0_ERRMSG").value
search_term = "SSL";
str_check = str.indexOf( search_term );
if (str_check==-1) {
search_term = "QMS";
str_check = str.indexOf( search_term );
if (str_check!=-1) {
str_val = str.substring(str_check,str_check + 9)
url_location = "f?p=&APP_ID.:200:&APP_SESSION.::NO::P200_ERROR_MESSAGE:"+str_val
window.location = url_location;
url_location = "f?p=&APP_ID.:200:&APP_SESSION.::NO::P200_ERROR_MESSAGE:"+str
window.location = url_location;
</script>
The error displayed on the screen, without this template change, is:
"ORA-20001: Error in multi row delete operation: row= 1, ORA-20101: SSL-01010 ORA-06512: at "SWIFT_OWNER.APEX_CONS_TEST_BTRG", line 3 ORA-04088: error during execution of trigger 'SWIFT_OWNER.APEX_CONS_TEST_BTRG', delete from "SWIFT_OWNER"."APEX_CONS_TEST" where "ID" = :p_pk_col"
As you can see our error code is contained in this output.
However, #MESSAGE# is just "multi row operation failed" which means our error code is never picked up. I can't see how to access the full error message in the template.
If there is an easier way of doing this I'm open to suggestions.
Thanks
Sara

I think I've resolved this myself (with reference to a few different forum posts!) by changing the javascript in the Error Page Template to:
<script language="javascript">
function getElementsByClass(searchClass,node,tag) {
var classElements = new Array();
if ( node == null ) node = document;
if ( tag == null ) tag = '*';
return node.getElementsByTagName(tag);
function show_error_text() {
errorElements = getElementsByClass("ErrorPageMessage",document,"div");
if (errorElements.length > 0 ) {
errorText = errorElements[0].innerHTML;
search_term = "SSL";
str_check = errorText.indexOf(search_term);
if (str_check==-1) {
search_term = "QMS";
str_check = errorText.indexOf( search_term );
if (str_check > 0) {
errorText = errorText.substr(str_check);
errorText = errorText.substr(0,errorText.indexOf("ORA")-1);
errorText = errorText.replace(/#/g,"~");
url_location = "f?p=&APP_ID.:200:&APP_SESSION.::NO::P200_ERROR_MESSAGE:"+errorText;
window.location = url_location;
show_error_text();
</script>
We know our error codes will always start with SSL or QMS. So this will pass the bit of the Oracle error we're interested in to P200_ERROR_MESSAGE or the full Oracle error if it hasn't been raised by some of our code.

Cant get my Outlook contacts and mail set up without crashing...error message is "Apple Outlook DAV config has stopped working"

When I check the box to add Mail, Contacts, etc to iCloud, it goes through the setup about half way and crashes on the contacts. Error message is:
"Apple Outlook DAV Config has stopped working" Any suggestions? I can't get this stuff set up! Thank you

Hello Washit,
Sorry to hear that you are getting the error message "Apple Outlook DAV Config has stopped working."
I recommend following the steps in the section titled "Troubleshooting iCloud Contacts update or setup issues with Microsoft Windows (Microsoft Outlook)" in the following article:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Thank you for using Apple Support Communities.
Best,
Sheila M.

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Customizing PST error message in Outlook

Similar Messages

Maybe you are looking for