Customizing the Monitoring and Report Viewer - ACS 5.2

Is there a way to modify the columns shown in the monitoring and reporting viewer so that I can see all of the relevant columns in one screen, similar to the ACS 4.x view? I would like to view things at a glance, rather than having to click into each item. Thank you for your help in advance.

that's correct. here is what we have in ACS 5.4 for snmp.
ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
•SNMPv2-MIB
•RFC1213-MIB (MIB II)
•IF-MIB
•IP-MIB
•TCP-MIB
•UDP-MIB
•CISCO-CDP-MIB
•ENTITY-MIB
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
~BR
Jatin Katyal
**Do rate helpful posts**

Similar Messages

Cisco Secure ACS 5.4/Monitoring and Report Viewer - SNMP Settings

Hello Everyone.
I hope this is the right forum for my question.
We just purchased 8 1121 ACS 5.4 appliances. I have some familiarity with the older 1113 and 1120 appliances running ACS 4.2. So I have a lot to learn.
Right now I'm trying to understand the Monitoring and Report Viewer System Configuration. I set the SNMP V2 read comm. string to the same string I configured from the CLI.
etc-labacsb1-1/admin# show runn | inc snmp
snmp-server contact "ACS1121;XXXXX"
snmp-server location "B1 Lab"
snmp-server community XXXXXX ro
1) It was not the same string as configured on CLI. Does setting this give me access to query more than system type or server type MIB objects.
2) Can you provide an example? (for example to query a switch - snmpwalk -v 1 -c XXXXXX hostname 1.3.6.1.4.1.9.9.43)
3) What is the MIB object tree OID (1.3.6.1.4.1.9.???) for these ACS appliances?
Thanks in advance.
Ray Westphal
EHI

that's correct. here is what we have in ACS 5.4 for snmp.
ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
•SNMPv2-MIB
•RFC1213-MIB (MIB II)
•IF-MIB
•IP-MIB
•TCP-MIB
•UDP-MIB
•CISCO-CDP-MIB
•ENTITY-MIB
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
~BR
Jatin Katyal
**Do rate helpful posts**

Monitoring and Reporting on ACS 5.1 not working

Hello,
I have not managed to get the Monitoring to work on the ACS 5.1. This is an eval version. Advanced monitoring and reporting is installed on the ACS. This is my configuration on the Cisco Router
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 0 default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
logging origin-id ip
logging facility syslog
logging source-interface GigabitEthernet1/1
logging host 1.1.1.1 transport udp port 20514
logging monitor informational
epm logging
On the ACS, when I open the dashboard --> ACS health -> I get Status not available.
Global Instance under Logging Categories been configured for local logging
Thanks

The view logprocessor is not running
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running
Process 'runtime'                   running
Process 'adclient'                  running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         not monitored
Does anyone know how to start it??
Thanks

Cisco ACS 5.2 (esx 4 vm) and Monitoring and Reports failure

I am evaling the Cisco ACS 5.2 Virtual Appliance on ESX4 and everything is working fine except for the "Monitoring and Reports" no matter what browser I try, it just keeps loading new tabs of the welcome screen, in the case of some browser versions it does this and does not stop.
I have tried the following browsers on Win7 Pro: IE 8, Firefox 4, Firefox 3, Chrome 12.
I have tried the following browsers on MacOS 10.6: FireFox 4, Safari 5.0.5
In Safari 5.0.5 it calls up one new window, but doesn't load anything in the right hand frame.
This is a fresh install, with an eval license. I am rather annoyed that it doesn't work out of the box, especially when there was not documentation that mentioned that anything needed to be setup for this to work after initial install, unless I missed something.
I installed the VM with the base 5.0.26 ISO and then applied patches 5.0.26-1 through 5.0.26-5.
Can anyone provide any help on this?

I am evaling the Cisco ACS 5.2 Virtual Appliance on ESX4 and everything is working fine except for the "Monitoring and Reports" no matter what browser I try, it just keeps loading new tabs of the welcome screen, in the case of some browser versions it does this and does not stop.
I have tried the following browsers on Win7 Pro: IE 8, Firefox 4, Firefox 3, Chrome 12.
I have tried the following browsers on MacOS 10.6: FireFox 4, Safari 5.0.5
In Safari 5.0.5 it calls up one new window, but doesn't load anything in the right hand frame.
This is a fresh install, with an eval license. I am rather annoyed that it doesn't work out of the box, especially when there was not documentation that mentioned that anything needed to be setup for this to work after initial install, unless I missed something.
I installed the VM with the base 5.0.26 ISO and then applied patches 5.0.26-1 through 5.0.26-5.
Can anyone provide any help on this?

ASK THE EXPERTS - WAAS MONITORING AND REPORTING

Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to learn about Cisco Wide Area Application Services monitoring and reporting with Michael Holloway and Joe Merrill. Michael is an escalation support engineer in the Application Delivery Business Unit focusing on escalations to engineering related to the Cisco Wide Area Application Services (WAAS) product. He has worked with Cisco WAAS since its initial development, and with the first product beta.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Joe Merrill is an escalation support engineer in the Application Delivery Business Unit focusing on escalations to engineering related to the Cisco Wide Area Application Services (WAAS) product. He has worked with Cisco WAAS since its initial development, and with the first product beta.
Remember to use the rating system to let Michael and Joe know if you have received an adequate response.
Michael and Joe might not be able to answer each question due to the volume expected during this event. Our moderators will post many of the unanswered questions in other discussion forums shortly after the event. This event lasts through August 27, 2010. Visit this forum often to view responses to your questions and the questions of other community members.

Very good questions. Let me try and take them one at a time. Some of the answers you will likely find in the CM GUI help (upper-left corner is the Help button), or in the online documentation. But let's add a little more color and detail.
1)When we pull bandwidth Optimization report, on Y-Axis the graphs says Effective Capacity .What is Effective Capacity?
Basically, the "effective increased bandwidth capacity" is telling you how much additional WAN bandwidth you've gained because of the optimization. It will chart somewhere between 1 times and 100 times. Typically it charts all traffic, though you can configure it to chart traffic for specific Applications.
The CDM online help gives the formulas used to chart the graph:
Effective WAN Capacity = 1 / (1-% Reduction Excluding Pass-Through)
% Reduction Excluding Pass-Through = (Original Excluding Pass-Through - Optimized) / (Original Excluding Pass-Through)
2)what is reduction % excluding and including passthrough
Looking at the formulas given above might help you understand. The one is a reduction ratio compared to only the original traffic that is optimized. The other is a reduction ratio compared to all original traffic, whether it is optimized or not. So, if you want to know what kind of optimization you are getting for the traffic that you configured to have optimized, look at the "excluding pass-through" numbers. If you want to know the positive effect that optimization is having on your full traffic load, take a look at the "including pass-through" numbers.
3)What is effectivity capacity including and excluding passthrough ?
The effective capacity is what kind of throughput you can potentially realize on the WAN -- assuming you would fill it to 100% capacity -- because of the level of optimization you are seeing. The "including" numbers show you the effect of optimization compared to all the traffic passing through the WAE whether it is optimized or not. The "excluding" numbers show the effect of optimization compared only to the traffic that is receiving optimizations.
4)With the help of which report, we can show the customer that the file download which took 10 mins in first attempt, is downloaded in 10secons in next attempt?
This one is a little trickier. The reports are much broader than a single connection. They are for all traffic, or for traffic that matches specific defined Applications. You could create a separate Application and matching classifiers for the client and/or server IP addresses and/or ports, run the test, then configure the charts to only show you the data for that Application. By default, statistics for an Application aren’t charted unless you check the "Enable Statistics" box when defining/editing the Application.
5)How to show that the bandwidth utilization has decreased by which %.
You want to look at the % reduction numbers you asked about in #2 above.
6)Which report says that the applications have become this much time faster?
These questions are normally put forwarded by many customers ? Can you please help me with your expertise answer ?
This is probably the hardest question to answer.
"Faster" isn't always easy to define. You are probably talking about user experience rather than statistics found in a network device. What determines that experience? A web page fully populating with all the pictures? A CIFS-based application that saves a file? A custom application that collects data from different servers over different protocols to perform some operation? Much of that is subjective and based on multiple individual requests, sometimes over different protocols.
What we can provide are statistics to show the effect of WAN optimization and application acceleration for specific types of traffic. We can't show you that displaying a web page is N times faster with WAAS, because we don't know which of all the many HTTP requests that are made are specific to the user experience. But we can show that each of the requests received so much overall optimization, so much optimization from DRE, so much optimization from LZ, so much added benefit from HTTP acceleration.
What you would probably do is collect some base-line timings for performing certain user activities, then perform the same operations both cold (first pass) and warm (subsequent passes). Back up those timing numbers with reports from the CM GUI, and perhaps even the "show statistics connection connection-id ". Which reports to use? Start with those Optimization and Acceleration reports. Those are the reports we expect will give the most complete/accurate pictures of the benefit of WAAS. You can also create and even schedule custom reports as needed.

Getting no file found under the given path- VNX-Family Monitoring and Reporting

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

My mac Pro Tower shows some green and reddish lines on the monitor and gives report of unresponsive processor

And never heard of one case of AHT finding or reporting a real GPU related problem.
It does sound like the graphic card and best way to know is to swap it out, even if you have a PC card around.

Advanced monitoring and report feature on ACS5.1

Hi !
I would like to know where I can find documentation about the "Advanced Monitoring and Report" feature on ACS server version 5.1.0.44-3. I would like find information about the installation, benefit of this feature, and how to use advanced monitoring and report feature.

In ACS 5.0 there was a separate licensed feature that enabled additional monitoring and troubleshooting features such as alarms, thresholds and additonal reports. In ACS 5.1 this functionality is included by default as part of the base product

Cant see the native groups on the forms and reports

We are migrating 9.3.3 to 11.1.2.1. We recently found the issue after the migration. Even after migrating the users, groups and provisioning using LCM; we cant see the groups in the forms and reports.
We did the migration for test environment, but didnt encounter this issue.
For eg, when I click on 'assign access' for a planning form I dont see the group assigned to that form. I can see that group in the shared services with all the provisioning. I can find the group and assign it manually for that form. But it doesn't shows up after the migration.
I opened the SR with oracle who suggested to bring over the schema and upgrade/register the applications again, as there might not be any groups present when I register the application before.
We brought over the schema, migrate and register the applications, but the problem still persists.
Has any one encountered issue like this, I would, I would really appreciate any suggestions.
thanks

Thanks for your reply John. I ran the UpdateUsers.cmd utility, but it didnt do anything. I brought over the schema again, updated and registered the application. Everything looks good so far, I can see the groups on dimension access and on the webforms.
When I run create or refresh security it deletes all the records in HSP_ACCESS_CONTROL. The view link disappears from the planning dimensions and i cant see the groups assigned on the webforms as well.
Any idea would be highly appreciated.
thanks

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

Error occurred. Contact the administrator and report the exception ID

Dear All,
We are on EP 7 SP8. We just now performed a system copy and are right now done with the post installation activities. All seems fine but we are having a problem in the Navigation Windown Quick Create link on the left hand side. Here I am always getting an error: Error occurred. Contact the administrator and report the exception ID in the log: 001A4B066A940068000001B500002946000433EB006CFEAC
Can someone please guide me with how to remove this error.
Please let me know as we are stuck and need to give the system to the client.
Thanks a lot in advance.
Best Regards,
Rajeet

Hello
Can you see the defaulttrace file for more details?
Open up Visual Administrator and go to Log Viewer. Then open up the Defaulttrace file. Generate the same error message and look in the file for more details.
What do you see?
And of course.. What did you do to make this error ?
Best Regards
Kristoffer Engh

How to Install the Forms and Reports 6i in Ubuntu 6.06 LTS

Dear All,
I need to install Forms and Reports 6i in Ubuntu 6.06 LTS.
I had downloaded the d2k6irelease2.tar also and extracted the tar file.
I don't know how to start up with the installation further., Is there any document available for the installation process inubuntu.. or what are the steps that i need to follow to make it work..?
Many thanks in advance...

Hi,
Here's the Forms and Reports Services Deployment Guide for OAS 10g 10.1.2:
http://download-east.oracle.com/docs/cd/B14099_11/web.1012/b14032/toc.htm
You will need to modify your default.env to point to the directory where your .fmx is located and formsweb.cfg to run the specific form, e.g. foo.fmx (default is test.fmx).
HTH,
Jim

How to debug a form (servlet) in the Forms and Reports Server

Hi:
I have a new install of an application that ran perfectly on a different host using the Forms and Reports Server.
I have installed the FRS on the new host and it is working fine. I can run the test form.
When I run my actual forms app, I only get a blank screen in the browser and on the status bar it reports "Applet Started'.
Is there a way I can turn on debugging or something so I can see at what point it is failing or why the form is not opening properly?
Any advise would be appreciated.
Many thanks.
Bruce

Thanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.

How to move the pages and reports from one dashboard to another

hi all
can please any one tel me hw to copy the reports along with pages from one dashboard to another
Thanks

Hi,
Go to Administrator->Manage Presentation Catalg->Click on Group folder under which the dashboard and reports are present
1)Create one folder and copy the reports which are present in the dashboard pages you want(reports will be under some specific folder,open and copy one after the other to the newly created folder).Do this if you want other set of same reports for new dashboard that you are creating
2)Click on _portal and create a new folder(new dashboard)
3)Click on dashboad that is to be copied
4)copy the pages one after the other into new dashboard folder
If you are not keeping new set of reports then no need to point reports in pages,if reports are placed under new folder then go to each page and pull those reports from newly created folder.
Regards,
Srikanth

Email Func:BCS Classes-Customizing the sender and receiver

Hi All,
In my functionality previously, I used FM 'SO_DOCUMENT_SEND_API1' wherein I can freely customized the sender and recipient. But I need to change it to BCS class due to 50 character limitation in Subject.
Please see thread Email Functionality:How to create Email Subject w/ more than 50 CHAR Length.
DATA: recipient          TYPE REF TO if_recipient_bcs.
*SENDER*
"Set Sender
      sender = cl_sapuser_bcs=>create( sy-uname ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
The code above would always trigger the email of the owner of SY-UNAME. In my case, I need a custom one email, let's say, a hard coded non SY-UNAME email.
What I did:
Change the data definition of sender as follow, but this would give me not compatible type parameter.
DATA: sender             TYPE REF TO if_sender_bcs.
"sender = cl_sapuser_bcs=>create( '<sender_email_literal_goes_here>' ).
Question: Is this possible? or the class is fixed to SY-UNAME's email?

Hi ArS, it's working now as a program.
Still part of the thread.
Now I want to create a FM for this:
In my Function Group>TOP INCLUDE, I have
DATA: sender           TYPE REF TO if_sender_bcs,
             w_sender     TYPE ad_smtpadr.
In my FM code:
IMPORT Parameter:
    SENDER TYPE AD_SMTPADR
sender = cl_cam_address_bcs=>create_internet_address( w_sender ).
      CALL METHOD send_request->set_sender
        EXPORTING
          i_sender = sender.
SYNTAX ERROR: The field "SENDER" cannot be changed.

Customizing the Monitoring and Report Viewer - ACS 5.2

Similar Messages

Maybe you are looking for