Cutover from manual document type to automatic document type

Hi, has anyone ever cut over from manual to automatic document type?
(I have seen the opposite, where an automatic document type becomes manual. It was successful)
Eg in a data migration, to populate some interunit elimination history data (but avoiding runnnig tasks on history), we could post intrerunit via PL20 flexible upload to a 'manual' document type.
Then before first use of BCS tasks in the system, change the document type from manual to automatic.
i can't see any reason why it would not work, will need to be tested of course.
Any experience or comments out there?

Thanks guys, I've been too busy to test this but I'm very sure it does work and I also checked with SAP and they agreed.
So closing the message - I'll only update this message if it does NOT work as expected.

Similar Messages

  • How do I switch from manually sync back to automatic?

    hey guys my b/f set itunes up for me and he set it so i have to manually sync, but i want it to do it automatically. PLEASE HELP ME!!!

    You will need to change back to autosync in your iPod preferences when your iPod is docked to the computer.

  • Copying from sales document type L2 to RK is not supported

    Dear Experts,
    Can any guide me please regarding my issue,
    My process is linked with service order,after creation of service order,I am going to DP90 Tcode with this it will generate debit memo request,and I will do the billing from vf01.
    Now I want to make some  invoice correction,
    so I have copied the standard RK invoice correction document to ZRK
    and i have assign this for my sales area in sales document header,
    now I have raised the order from va01,and I have given the invoice document number,
    its showing this error u201CCOPYING FROM SALES DOCUMENT TYPE L2 TO ZRK IS NOT SUPPORTEDu201D
    for this I think I have to maintain the copy controls,
    can any one help me out how to maintain the copy controls for invoice correction.

    Dear JP,
    As you said I have maintained the item category,I have only two item categories,one is L2N,L2W.
    I have copied the standard document  from VTAF,and I have maintained the copy controls like this,
    Copied from RK to F2 as ZRK to ZL2 header data
    Data T   052  billing doc header
    Data T  103   billing bus header data
    Data T  003   billing header partner
    Copying requirements as   021  billing header
    Tick on copy item number
    Then item category maintained as
    Item category as L2N
    Data T  153  Item from billing document
    Data T  104  billing bus item data
    Data T  004   billing item partner
    Copying requirements  as  000
    Pricing type         u201CEu201D
    2nd pricing type  u201CDu201D
    And the same for L2W,but I have not maintained for u201CG2Nu201Ditem category,but I has copied automatically?
    Then I have raised the sales order from va01,its ask the billing document number,I have  given the billing doc number and press on copy,its has open the sales order,
    Here I have two issues,
    1st its generating the two same line items,with G2N item category
    EG:if I have given 2 materials line items then its generating the 4 line items with the same material.
    2nd I am not able edit any line litem,it all are coming in non editable mode,how to make editable field,and make the changes for price and quantity.
    After saving the document again I have to do the billing from vf01?
    please suggest me,so this will be added advantage to the user.

  • Tracking manual condition types in billing document

    Hi,
    I need to track changes in manual condition types in billing docs over a period of time. These changes are not maintained at Change doc tables (CDHDR,CDPOS).
    Please suggest whether there is any other way to solve this issue.
    Thanks.

    Hi,
    Check with KONV table
    Enter the Condition record number in field KNUMV of table KONV (This you can get from VBRK table for the Billing Document), and check with the field KMPRS in KONV.
    Reward point if it helps !!!!!
    Harsh

  • How can I automate pasting from one document into another?

    Hi, I have a need for a document that I am regularly appending a blank form from another document to. I would typically just open the second document and select and copy the block of text and then return to my working document and enter a page break and then paste in the form, over and over.  I do this so often that a way to automate this would be a huge help.  However I have had little luck working with automator myself probably because I am missing something.  But I would appreciate any ideas....Thanks

    If you took time to read carefully Pages User Guide, you would know this well described feature :
    and you would use it to build a template as I urged you to do.
    Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:42:20
    Please :
    Search for questions similar to your own before submitting them to the community

  • I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't

    I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't continue in Hebrew.  I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste.  Does anyone know how to fix this?  I use an older MacBook running OS 10.9.1.  I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

    Just clarifying:
    Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
    Pages 5 has much better support but with bugs.
    If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
    If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
    As Tom recommends the only real solution on the Mac is Mellel.
    Peter
    btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
    Peter

  • Regarding-Copying from sales document type

    Hi Friends,
    I am trying to create Good Stock return with reference of sales invoice. While entering the reference number system is giving a error message which says u201CCopying from sales document type ZEXP to RE is not Supportedu201D. How to resolve this issue?
    Regards,
    Shankar G

    Hi Shankar,
    You need to maintain the copy controls from Invoice to Sales document. Because your Invoice type is customized.
    You need to copy from F2 to RE and make the changes as per yopur requirement ZEXP to RE . Then try to create the return order with reference to invoice.
    I hope its clear.
    Regards,
    SK

  • Copying from sales document type QTH to HU is not supported

    guys i was trying to create a contract based on a quotation created by me  here QTH is my quotation type and HU is my contract type the error i encountered was thiss.
    Copying from sales document type QTH to HU is not supported .

    Hi
    In VTAA maintain the copy control settings from Quotation to Contract
    I think you can copy the AV document type which is quotation for contract.
    regards

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • Create TO from material document automatically

    Hi Experts,
    I'd like to ask for a solution about Create TO from material document automatically.
    Business Scenario:
    Normally, user will create TO from material document by LT06, then confirm it by LT12. If there is no stock on the shelf at the time when user confirms it, user will put quantity zero when confirmation by LT12, then user will create a new TO according to same material document.
    Requirement:
    According to scenario above, if there is no stock on the shelf, user wants to create a TO from material document automatically when he confirms the first TO.
    here I'd like to ask if there is any solution on it?
    We tried to use user exit: EXIT_SAPLL03T_002, and call transaction in it.
    but result is: first TO is not confirmed with zero quantity yet, so new TO can not be created.
    Please tell if there is any other solution, many thanks.
    Best Regards,
    H.B

    Hi
    To my understanding at the first time when TO is created for the material document and stock is not available using the available user exit in TO confirmation u can forcibly confirm the TO but for the second time TO creation and confirmation there wont be any trigger point( as bcz we have config to create TO immediately ony when mat doc is created) so for that u need to schedule a job for creation and confirm of TO's for the open mat documents.
    Regards
    Amarnatha

  • When I i open a picture from my Documents it automatically opens in Photoshop.  I want it to open in Lightroom. How do I change this preference?

    When I i open a picture from my Documents it automatically opens in Photoshop.  I want it to open in Lightroom. How do I change this preference?

    You cannot open an image with LR as you would with Photoshop , or Elements. (or a word document, etc)
    The Lightroom program can only open "Catalog" files  (*.LRCAT)   Opening a .LRCAT file will automatically open Lightroom.
    To edit images in LR you must first open the program, then IMPORT the image into the Catalog database (only ever once), then you select the preview thumbnail and go to the Develop module ( press "D")
    Your edits in the Develop module will show on the preview in the library grid.
    Your original image file is not altered, so will not look any different in File Explorer or Finder.
    To get an image file with your Develop edits applied, you must "Export" a derivative file in JPG or TIFF format.

  • Transfer document header text from billing document to FI document

    Dear all,
    Where do I specify that the document header text out of the billing document should be transferred to the corresponding FI document?
    Currently, the FI document header text (BKPF-BKTXT) remeans blank after transfer from billing document. We need this field to be filled in, but I haven't found how to have this filled in.
    In copy control from sales doc to billing doc, there is the possibility to transfer the Reference number & Assignment, but nothing about document header texts.
    Some say that it would only be possible via coding, but anybody has any idea if it might be possible via standard SAP?
    Many thanks!
    Best regards

    Hi,
    We also had a bit same requirement, which is to copy the billing header text to FI item text (BSEG-SGTXT). The solution we took is to use FI Substitution (t-code GGB1), so that every time a FI document created from SD... the substitution reads the billing header text and put it in the FI item text. I think the same method could be used for FI header text (BKPF-BKTXT). Below is the solution for your reference.
    Prerequisite:
    Document Type = 'RV' AND Reference <> '' AND
    ( Transaction code = 'VF01' OR Transaction code = 'VF02' OR
    Transaction code = 'VF03' )
    Substitution:
    Using exit which coding is as below.
    *&      Form  u900
          Copy Billing Header Text to SGTXT
         -->P_SGTXT    FI Item Text
    FORM u900 USING p_sgtxt TYPE bseg-sgtxt.
      DATA: lv_name TYPE thead-tdname,
            lt_line TYPE STANDARD TABLE OF tline,
            lw_line TYPE tline.
      lv_name = bkpf-xblnr.
      CALL FUNCTION 'READ_TEXT'
        EXPORTING
          id                      = 'Z001'
          language                = sy-langu
          name                    = lv_name
          object                  = 'VBBK'
        TABLES
          lines                   = lt_line[]
        EXCEPTIONS
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          OTHERS                  = 8.
      IF sy-subrc EQ 0.
        READ TABLE lt_line
          INTO lw_line
          INDEX 1.
      In Billing Header Text, the sign '&' (ampersand) is automatically
      added some characters so it becomes '<(>&<)>'.
      The logic below is to fix that issue.
        REPLACE ALL OCCURRENCES OF '<(>' IN lw_line-tdline WITH space.
        REPLACE ALL OCCURRENCES OF '<)>' IN lw_line-tdline WITH space.
        p_sgtxt = lw_line-tdline.
      ENDIF.
    ENDFORM.
    Regards,
    Teddy Kurniawan

  • [CS3 JS]  Move pages from one document to another?

    First, a brief explanation of what I am trying to do. I have several individual chapters that I am including in an INDD book. However, I also want to be able to allow those individual chapters to stand alone, meaning that I want to add a cover/title page to each chapter file (these two pages would be placed before the current page 1 of each chapter).
    My preference would be to write a script that would open the cover/tp file and open the first chapter file; this part is no problem. Where I am running into trouble however, is the second step: moving the cover/tp pages (2 pages) over into the chapter file.
    Manually, I would open Cover.indd, activate the "move pages" menu, "Move pages: 1-2", "Destination: Before_Page 1", "Move to: Chapter1.indd".
    With over 100 chapters in the book, however, I would prefer to automate the process. I have looked into the Page.move and PageItem.move elements, but both look like they would require a location in the current document (either in (x,y) form or using "AT_BEGINNING".
    If I cannot get this to work, I will likely try to insert two blank pages, then cut/paste with a script, but I would prefer the "move" functionality, if it is possible.
    A couple of answers to potential questions:
    I can't simply place the INDD cover file b/c it uses a text variable to pull the chapter name; this personalizes each stand-alone chapter.
    Same answer to why I can't just slap the 2-page .pdf on the front of each. I need the text variable to still be active.
    Has anyone tried to move pages from one document to another using scripting? I tried to explain what I am trying to do, but if it doesn't make sense, I can try again. :)
    thanks!
    Matt

    ok here we are
    I get a raw skeleton that you will have to adjust but it's functional.
    Use a PDF for placement as you can specify the page that you want to place.
    I don't know if you can do the same for indesign files.
    So basically, it starts adding 2 pages and placeing the pdf in the same time.
    After that, it creates the textVariable and the frame that will receive it.
    Here you are:
    //If a document is open
    if(app.documents.length!=0)
    var ad = app.activeDocument;
    //Pages placement
    for(i=0; i<2; i++)
    //Add 2 pages on top of the document;
    var tmpPg = ad.pages.add(LocationOptions.BEFORE, ad.pages[0]);
    //Here you place your pdf
    app.pdfPlacePreferences.pageNumber = i;
    tmpPg.place(File(cover.pdf), false)
    //You should specify page x and page y but ain't found yet the way to go.
    //Text variable creation
    //Check if the textVariable named "txtVar" does not already exist...
    if(ad.textVariables.item("txtVar")==null)
    //if not found, create the text variable named "txtVar"
    var txtVar = ad.textVariables.add();
    txtVar.variableType =VariableTypes.CUSTOM_TEXT_TYPE;
    txtVar.name = "txtVar";
    //Set the contents of the text variables to the string "test"
    ad.textVariables.item("txtVar").variableOptions.contents = "test";
    //these coordinates don't care aboutyour units but you may adjust them to your needs
    var y1 = ad.marginPreferences.left;
    var x1 = ad.marginPreferences.top;
    var y2 = y1+5;
    var x2 = x1+25;
    var myFrame = ad.pages[0].textFrames.add({geometricBounds:[y1,x1,y2,x2]});
    //Set the contents of the frame to the text variables "txtVar"
    myFrame.contents=ad.textVariables.item("txtVar").variableOptions.contents;
    //You may want to stylize the txtVar
    //In this case, either you use a existing characterStyle or you create one in the script
    Bye Loic

  • Copy and paste copy from another document

    Hi,
    Somewhere I've changed the color type is presented when you create a new text block and can't find where to change it.  So everytime I start a new block of text or when I copy and paste from another document (word, email) the copy color has to be manually changed to black to see it.  Where do I change this preference?

    Thanks for speedy reply.  So that fixed my new doc - when I put in new copy it is black.  On the previous document, with no text select - click on the text tool and swatch shows it will be black.  Draw the box on the layout - swatch switches no color (white box with a red slash).  So, I unselect everything again, click on the text tool and it shows it will be black.  Click inside the text box and it goes invisible again.  Switch to color  - click on text tool and it shows it will be black, but as soon as I draw the text box - shows it will be invisible.  Shut down Indesign, restart - nothing gives.
    Again, thanks for your reply.  This isn't major just one of those little annoyances that is so minor with all the other stuff going on ... but with snow leopard problem - I just don't want to mess with too and I can't fix the other.  giggle. 

  • Zero BED value when posted J1IIN excise invoice from billing document

    Hi Guys,
    I created VA01, VL01N and VF01. Bed value is showing in VF03 but when I created J1IIN from billing document, BED value is zero. I checked several places like below
    a) Logistics-General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction. Here ensure that for DLFC, necessary Account names are maintained.
    b) Similarly, in the next tab, Specify G/L Accounts per Excise Transaction, ensure that for that Excise Group, relevant G/L Accounts are assigned
    c) Finally, in Business Transaction tab, select Outgoing Excise Invoices where you need to ensure that you have assigned billing type to delivery type and also the default Excise Groups and Series Groups are maintained.
    I couldn't figure it out where the problem is. Please help me where to check and what should be done for this?
    Thanks,
    Manohar.

    I maintained excise defaults for TAXINN, I am maintaining A/R BED % which is coming in billing document but not in J1IIN. When I click on simulate it is giving a popup box saying 'No defaults could be proposed for Excise utilization' and click on continue then it is giving another message saying 'Excise modvat accounts not defined for GRPO transaction and E2 excise group'. Please help me what is it?
    Thanks,
    Manohar.

Maybe you are looking for