Cutting message when connecting to IRC

Hello.
When I conncet to my IRC server and channel i try to write something on it using PRIVMESG #Channel message but when i write sth down my message is cutting after spacebar.Here is some code:
          InetAddress ina = InetAddress.getByName(serwer);
          socket = new Socket(ina,6667);
          out    = new PrintStream(socket.getOutputStream());
          in     = new BufferedReader(new                 InputStreamReader(socket.getInputStream()));
public void run()
     try
          String data;
          while ((data = in.readLine()) != null)
               // here my message is send but it is cut after i use spacebar
                        System.out.println(data);
               panel.addText(data);
     catch(IOException ex)
          System.out.println("one!"+ex);
          JOptionPane.showMessageDialog(panel,""+ex);
     close();
}Does anybody know as well IRC to help me ? In consol the message is out but when I try to check if all is OK in second connection in mIRC always my message was cutting after spacbar.

Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
You can download iTunes for your computer here.
http://www.apple.com/itunes/

Similar Messages

  • Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Error message when connecting to iTunes says my new iPad 4 can't be connected as it requires version 10.7 or later. Surely a new iPad already has the latest version, and if it doesn't how do I get it?

    Not the iPad - your computer must be running iTunes 10.7 in order to sync. It has nothing to do with iTunes on the iPad.
    You can download iTunes for your computer here.
    http://www.apple.com/itunes/

  • Error message when connecting to Itunes

    Keep getting this error message when connecting.
    [IMG]http://img813.imageshack.us/img813/2214/ipod.png[/IMG]
    I have uninstalled and reinstalled twice now.
    Its an Ipod Touch 8GB with front and back camera.
    Thanks

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • Factime cuts out when connected

    HI,
    I received previous information to resolve Facetime cutting out when connected. I was advised to update to Facetime 1.05. I have continously been trying to purchase 1.05 but Apple store say it is already  installed on my cpmputer.  It is not, I have 1.0.3.
    How do I overcome this problem.
    My best regards
    John

    Try re-indexing Spotlight. The App Store uses it to determine what is on your computer.
    Spotlight – Re-index
    To the best of my knowledge, there was no FaceTime 1.0.3. It went from 1.0.2 to 1.0.4.

  • Getting error message when connecting to public wi-fi, why?

    Getting error message when connecting to public wi-fi, why?

    What error message?
    Are you sure that the network is really public?

  • Error message when connecting external hdd.....NTFS 3G error.

    Im receiving the following error message when trying to connect a Clickfree portable hdd.
    I am also recieving the message when connecting a WD portable hdd that was previously working
    before installing the Clickfree hdd.....
    NTFS-3G
    Could not mount /dev/disk2s1 at volumes/CF storage because
    the following problems occurred.
    /Library/Filesystems/fusefs.fs/support/fusefs.kext failed to load (libkern/kext) link error
    Check the sys kernal logs for errors or try kextutil (8).  The MacFuse file sys is not available (71)"
    I am trying to install it on a mac OS X 10.6.8
    Can anyone help please?
    thanks

    Regarding uninstalling, this is from the FAQ on the MacFuse site (http://code.google.com/p/macfuse/wiki/FAQ):
    Q 2.3. How can I uninstall MacFUSE?
    A: Launch the Mac OS X System Preferences application and go to the MacFUSE preference pane. Click on the "Remove MacFUSE" button. This will uninstall all MacFUSE components except the preference pane itself.
    You can keep the MacFUSE preference pane around should you decide to install MacFUSE again in the future. If you do wish to remove it, you do it just like how you would remove any other non-Apple preference pane: In System Preferences, control-click (right-click) on the MacFUSE icon and you will see "Remove ..." as an action.
    Only if you had the "Show Beta Versions" button checked in the MacFUSE prefpane, you'll have a property list (plist) file remaining at this point:/Library/Preferences/com.google.macfuse.plist. To remove it, you should uncheck the button before you remove the prefpane as described above.
    Note that an official (correct) MacFUSE installation will have a preference pane if you have MacFUSE 2.0 or later installed. If you have an older version of MacFUSE, you can uninstall as follows.
    The other thing you can do if you're having problems is go into System Preferences and there should be an icon for MacFuse.  By going into that there may be an option to disable it.  If so, do that first before attempting to uninstall and try mounting your drives again.

  • Since the last update for my Iphone 4s i dont get text messages when connected to wifi. my wife is getting them. Imessage is switched off on both phones.

    since the 6. version update. of my Iphone 4s My wife was getting my text messages. I found the problem was caused by Imessage when connected to Wifi. I deactivated Imessage on both phones to solve the problem. I now have updated my Iphone to 6.1.1 and i dont get text messages anymore. I have Imessage deactivated on my phone but my wife is getting my text messages again. my wifes phone was not updated to 6.1.1 because the last update lost all her contacts from her phone and we had to but them back in one by one from the outlook list. Her contact are listed in outlook on a seperate list to mine but we can only get my contacts download to her phone. We use the same laptop to sysc phones.
    My Iphone does not download photos to My Pictures anymore. I have to copy them across to a folder. I cant find where it backs them up to.
    I have lost all confidence in Apple now as i was forced to update to 6.1.1 because of 3G reception issues and not reciving calls and now back to spending several hours trying to fix my phone to recieve a basic text message.

    Are you and your wife sharing apple id?
    If you are that is the reason why she is seeing your imessage.
    On both phone go to settings - message - send&receive - make sure the cell is the default.
    You will have to uncheck or remove the apple id.

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • I have an error message when connecting my ipad to my laptop suggesting I need 64bit version of itunes. After repeatedly downloading and reinstalling Im still getting the same message. Any suggestions please?

    When connecting my ipad mini to my lap top I keep getting an error message sugesting I need to install 64bit version of Itunes. I have done this repeatedly but the same message keeps recurring. Cananyone help? Thanks

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • "Comm Error" message when connecting to car stereo

    When connecting my 80G IPod to the port in my car, the IPod screen rolls horizontally, then says "OK to disconnect", and the stereo displays the "Comm Error" message. I was able to connect to the stereo before but don't know what happened to cause this. Re-setting the IPod did not resolve the problem. Has anyone else seen this? Please help!
    5th Generation IPod   Windows XP  

    I’ve got a 30gb ipod doing the same thing. I know it’s not the car as my friends nano works fine on it. Have you have any success?

  • Error message when connecting 80GB Video iPod

    I'm getting this error message when trying to connect my 80GB Video iPod:
    "The iPod (name) cannot be synced. An unknown error occurred (-48)."
    Never seen this one before.
    I haven't synced this iPod for a few weeks but it always behaved fine before, taking a few seconds to appear in iTunes (v7.5) then syncing perfectly when I hit the Sync button (I have it set to manually sync only because sometimes I want to change the contents or only sync music).
    Before syncing on this occasion, I did an iPod software update via iTunes - iTunes said there was a newer version (1.2.3). After the update, I disconnected the iPod for a few minutes (somehting I wanted to check content before syncing), then reconnected it. At first iPod took about a minute to show up in iTunes - way too long. I Reset the iPod and tried again but still LONG delay to appear in iTunes (again about 1 minute). I did another Reset - same result. Then I did a complete Restore, after which syncing to restore the contents gave problems - it refused to finish the sync. I had to disconnect and start again, syncing the data one section per sync session - Contacts, music, videos, iCal - which seemed to work fine. Then I disconnected, waited a few minutes then reconnected the iPod to check. It wouldn't connect at all. Did a Reset, tried o connect again and it did connect but then proceeded to resync all my contacts taking almost 30 minutes (way too long) to do so (I had made NO changes in Address Book since that data was put in there). I tried to reconnect again but then got the error message (above). Did another total Restore and the same shenannigans happened. Now, I have an iPod with data on it and works fine, but iTunes won't recognise it - just gives this error message every time.
    By the way, my 8GB Nano (software 1.1.3) seems to sync fine on the same system, same computer.
    Could this be the 1.2.3 iPod software giving issues? I appreciate any help because I also use this iPod for recording for my work, which getting a little urgent now.
    Many thanks.

    Thanks Zevoneer, but no real success. I did all that but when I tried to sync after it, it got partially through the sync (about 10% I'd guess) and presented an error message saying that the disk couldn't be read form or written to (sorry but I forgot the error number). I disconnected the iPod, waited a few minutes then reconnected and again got the message but then the ipod continued to finish the sync, even though almost all of the music and 2 of my 4 videos didn't go over to the iPod. I'm now thinking that this just isn't satisfactory reliability from the device since I use it a lot in my work and rely on it. But this new iPod is only a few months old, had very little use and only made about 12 recordings - In comparison, I've used the Nano heaps but now want to move over to the bigger one, basically for more capacity and bigger screen for video. I wonder if it's a hard drive failure in this iPod?
    null

  • Error message when connecting to I Tunes

    I am getting an error message when I connect to ITUNES that says I do not have anymore capacity for more songs. I have a mini and only have 300 songs on it. Any ideas? It still says I have 2.9GB avialable on MINI. Any help would be appreciated...

    BTT

  • [POL-3019] there is insufficient space on the disk message when connecting

    Hi there,
    I get this message when I try to connect to an oracle lite database.
    [POL-3019] there is insufficient space on the disk
    There is diskspace enough, and I know the database limit is 4Gb. The database I want to connect to has this size.
    I want to connect to the database to cleanup / inspect the database because of the size problems. But I can't connect to the database.
    Is there an other way to connect to the database ?
    Thanks in advance,
    Jacco

    Hi vasileios ,
    I'm using oracle olite40.jar and try to connect from Linux using Jdeveloper 11.
    Jacco

  • How to avoid syslog messages when connecting via Perl SAP::RFC ?

    Everything works fine with Perl SAP::RFC calls to our ERP 6.0 thanks to Piers Harding except numerous entrys in the SAP-syslog (SM21) which make that a little bit unclearly.
    Tracing is set to "0" when connecting via new SAP::Rfc( ASHOST .. , TRACE    => "0" ) from Perl.
    The syslog - entries look something like this:
    07:46:10 DIA 000                          R1  M Trace vom Remote Client übernommen.       
    07:46:18 UP2 062 011 MYRFCUSER              R1  L Trace für Benutzer MYRFCUSER deaktiviert.
    Even when tracing is set to "0" there is also a *.trc-File in the directory where the perl script resides on RFC client side.
    In this trace file one can see the followig excert:
    >>> RfcOpenEx ...
    Got following connect_param string:
       TRFC=0 LCHECK=0 UNICODE=0 PASSWD=******* USER=MYRFCUSER LANG=DE *TRACE=CLIENT=011* ASHOST=myhost SYSNR=00
    Send RFCHEADER: 01/LIT/IEEE/SPACE/1100
    Send UNICODE-RFCHEADER: cp:1100/ce:IGNORE/et:5/cs:1/rc:0x00000023
    Could someone please give me a hint what is going wrong here.
    Thank you.
    Martin

    May be set TRACE->'1' and got tracing messages ?

  • Error message when connecting Nano to computer - please help!

    I just started getting an error message when I try to disconnect my Ipod Nano from my computer after it's done charging/updating. The message tells me the device can't be stopped because other programs are utilizing files on my nano.
    I tried restarting my computer, but it froze. It's happened twice now and I have had to disconnect it when it says not to. Please help!

    I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

Maybe you are looking for

  • Class/Reflection/getFields()

    Dear Friends Can any one help me to find a solution for the following problem: I am using a class with inner class and table model. I wanted to get the list of all attributes from both inner and outer classes. All attributes are declared public. I us

  • Opening .docx

    i prepared a document in Microsoft word for mac (2008) and emailed it to my work - tried opening it on a PC but no go. saved it as .doc - nothing. it came out in symbols. any ideas?

  • Installing Windows7 on MacBook Pro 2011

    I recently purchased the new macbook and I still need to use some of the windows app. I managed to install the win7 ultimate 32 bit on the mac earlier, but couldn't install the bootcamp drive necessary. the only thing the mac os x cd providede was th

  • Kxml vs kxml2 vs wbxml4j

    Hi, All Could you explain differences between kxml and kxml2 java libs? The main question - what versions of oma dm supports kxml2 wbxml parcer ? Only 1.2 or previous too ? Also, what is better - wbxml4j or kxml or kxml2 ? What opensource stuff can I

  • What is Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154

    If Can, Please Help! I received the following System Error while trying to update Adobe Reader 8: Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154 I'm running Home Vista Premium