Since the last update for my Iphone 4s i dont get text messages when connected to wifi. my wife is getting them. Imessage is switched off on both phones.
since the 6. version update. of my Iphone 4s My wife was getting my text messages. I found the problem was caused by Imessage when connected to Wifi. I deactivated Imessage on both phones to solve the problem. I now have updated my Iphone to 6.1.1 and i dont get text messages anymore. I have Imessage deactivated on my phone but my wife is getting my text messages again. my wifes phone was not updated to 6.1.1 because the last update lost all her contacts from her phone and we had to but them back in one by one from the outlook list. Her contact are listed in outlook on a seperate list to mine but we can only get my contacts download to her phone. We use the same laptop to sysc phones.
My Iphone does not download photos to My Pictures anymore. I have to copy them across to a folder. I cant find where it backs them up to.
I have lost all confidence in Apple now as i was forced to update to 6.1.1 because of 3G reception issues and not reciving calls and now back to spending several hours trying to fix my phone to recieve a basic text message.
Are you and your wife sharing apple id?
If you are that is the reason why she is seeing your imessage.
On both phone go to settings - message - send&receive - make sure the cell is the default.
You will have to uncheck or remove the apple id.
Similar Messages
-
Since the recent update for my Iphone 5, I have been upable to toggle 'on' my location services button which affects the proper usage of some apps.
Any suggestions?The restriction passcode is not necessarily the same as the device passcode.
The restriction passcode can not set itself. It had to be set by you or by someone with physical access to your phone..
Ask the person/people you live with if they set one... A spouse, a parent, a jealous boy/girlfriend, etc.
If they deny it, and you don't know what it is, then the only thing you can do is restore the phone using iTunes. Do NOT restore your backup. The restriction settings are contained in the backup. -
I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??
Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Has anyone else had this problem? When I "share" documents from Pages or GoodReader via email It looks and sounds like documents have been sent but they never arrive and when I check my "sent" file, they aren't there. Very frustrating! I know I've sent them this way before and it worked so wondering if it's something to do with the latest updates to 6.1.3
Which email service provider are you using? You can install DropBox and share links to the files that way. When you snd to your self (cc or bcc) do the items show up? What file types and sizes are these attachments? Are you sending over WiFi or cellular connection? Try using more than one email account from a different provider (Gmail, yahoo, iCloud, etc) and see if it is email provider specific.
-
Since the last update for "numbers", everytime I open numbers I get a notice that a font is missing. I don't care that it's missing and I would like to not see that message. How can I get rid of it?
A document you had open at the time you quit Numbers has a font that you do not have (probably Calibri). You can change the font to one you have OR close the file before you quit Numbers. Numbers will open files you had open when you quit.
Looks like:
The other thing you can do is check the box "Close windows when quitting an application" in "System Preferences > General" -
HI there,
my laptop recenty went kaput and needed a new hardrive which was installed. When I got it back I downloaded itunes again and then bought some music. I connected my iphone and it would not allow me to transfer the music over to the iphone at all. It allowed me to pull all the music on my phone over to the itunes list which I realised at that point did have my usual music list on it. I can't seem to transfer any music purchased over to my iphone for love or money. This is happening to my brother on his itunes account also and he said it's happened since the last update on his. Any suggestions - I'm quite desperate as this is driving me nuts.
Many thanks,
SarahPlug in phone to computer.
in iTunes click on your device and then Music Tab.
Deselect the playlist in question, and click sync
Try your sync again -
Hi I have an IPhone 5. Always before when I called someone...or they called and I had a pic set up for them in my contact list..... it would pop up the full size of the screen. I LOVED it! I could actually see it. Now...since the last update...or maybe the one b4 that.... The pic is just a little bubble that floats to the upper right hand corner. Does anyone know if there is a way I can get that full size pic back?
I'm sorry, there is no way to change that. It is a change with the newer iOS 7. You can provide feedback to Apple, like a large group of others have that are disappointed in this at www.apple.com/feedback and click on the appropriate link.
-
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
Since my last update for Mac OS X Lion 10.7.5 I have been unable to print to either my HP or Lexmark printers! Everything is connected but I get an "idle" message in the queue. I have "Reset printer system" and re-added these printers. No luck. Help?
Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
-
since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.
Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default -
unable to view emails since the last updated download on my iphone 4,how to fix?
What exactly do you mean by "unable to view?" Does the Mail app quit? Regardless, try a reset:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
Hi everyone,
Since the last update of itunes 3days ago on my pc, itunes not recognising my ipad mini and iphone5.
I uninstalled, installed again, tried all the troubleshooting from official Apple online, but nothing changed !
Any ideas? Anyone else experienced this lately?
I used it for the last 18 months having no problems at all.
ThanksTry http://www.lemkesoft.com/ GraphicConverter.
-
'''I create these types of links.'''
ADD THIS EVENT TO YOUR CALENDAR
<www.afponline.org/pub/cal/ics/CTC_Executive_Roundtable_and_Dinner_FortLauderdale.ics>
Since the last update, instead of getting an appointment in my calendar, i got this page of code, but in IE it still works fine.
BEGIN:VCALENDAR
PRODID:-//Microsoft Corporation//Outlook 12.0 MIMEDIR//EN
VERSION:2.0
METHOD:PUBLISH
X-MS-OLK-FORCEINSPECTOROPEN:TRUE
BEGIN:VEVENT
CLASS:PUBLIC
CREATED:20100803T134051Z
DESCRIPTION:CTC Executive Roundtable\n4:30 – 6:30 p.m. Roundtable \n6:30
– 8:00 p.m. Dinner\nBin 595 (inside the Renaissance - Fort Lauderdale)\n
1230 South Pine Island Road\nPlantation\, FL 33324\n
DTEND:20100903T000000Z
DTSTAMP:20100803T134052Z
DTSTART:20100902T203000Z
LAST-MODIFIED:20100803T134051Z
LOCATION:Bin 595 (inside the Renaissance - Fort Lauderdale)
PRIORITY:5
SEQUENCE:0
SUMMARY;LANGUAGE=en-us:CTC Executive Roundtable and Dinner
TRANSP:OPAQUE
UID:040000008200E00074C5B7101A82E0080000000090812BF6EF32CB01000000000000000
010000000012A2164B6741F4D803D4EEF393A9457
X-ALT-DESC;FMTTYPE=text/html:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//E
N">\n<HTML>\n<HEAD>\n<META NAME="Generator" CONTENT="MS Exchange Server ve
rsion 08.00.0681.000">\n<TITLE></TITLE>\n</HEAD>\n<BODY>\n<!-- Converted f
rom text/rtf format -->\n\n<P DIR=LTR><SPAN LANG="en-us"><B><FONT FACE="Ca
libri">CTC Executive Roundtable</FONT></B></SPAN><SPAN LANG="en-us"><B></B
></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">4:30
– 6:30 p.m.</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> Roundt
able</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> </FONT></SPAN><
/P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">6:30 – 8:00 p.
m.</FONT></SPAN><SPAN LANG="en-us"><FONT FACE="Calibri"> Dinner</FONT></SP
AN><SPAN LANG="en-us"></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT F
ACE="Calibri">Bin 595 (inside the Renaissance - Fort Lauderdale)</FONT></S
PAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT FACE="Calibri">1230 South
Pine Island Road</FONT></SPAN></P>\n\n<P DIR=LTR><SPAN LANG="en-us"><FONT
FACE="Calibri">Plantation\, FL 33324</FONT></SPAN><SPAN LANG="en-us"></SPA
N></P>\n\n</BODY>\n</HTML>
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-DISALLOW-COUNTER:FALSE
X-MS-OLK-ALLOWEXTERNCHECK:TRUE
X-MS-OLK-AUTOFILLLOCATION:FALSE
X-MS-OLK-CONFTYPE:0
BEGIN:VALARM
TRIGGER:-PT5M
ACTION:DISPLAY
DESCRIPTION:Reminder
END:VALARM
END:VEVENT
END:VCALENDARStart Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
How do I unmerge my husband's phone from mine since the last update?
My husband and I use my iCloud account on our iPhones, but since the last update the messages are merged. How do I unmerge them? I am now getting copied on the texts getting sent to his phone and if I text him it shows up on my phone.
To fix this go to Settings>Messages>Send & Receive and do one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on all of your devices (the easiest solution); or
If you want to continue to receive iMessages at this email address on one of your phones, on the other one tap the Apple ID at the top, sign out, then sign back in using a different Apple ID (so both phones are using a different Apple ID for iMessage). Note: you can continue to share an Apple ID for purchasing from the iTunes and App stores. It does not need to be the same as the ID you are using for iMessage, FaceTime and other services.
Maybe you are looking for
-
I have updated the operating system and cannot find how to link my apple tv
How do you close open apps with the new operating system. Used to double click and then tap on open apps and delete them to save using up power?????
-
Mini-HDMI Port: Video OK, sound only works for iTunes
Let me start by saying, I'm pretty new to Mac so please be gentle with your answers... I just got a new HD Samsung TV and have connected it to my Macbook Pro through the Mini-HDMI port. There are two HDMI inputs on my TV, DVI and ARC. I'm using DVI.
-
Have JQuery for List View web part, But Full Text Not Visible
I have a list view web part on a page with which, I've edited the view the way I need which includes grouping. Inside IE's Developer tools, I can see the structure (TD and then an anchor tag linking to document) and see the class SharePoint uses for
-
so i needed to clear disk space so i could use imovie more, so i put a load of stuff in trash and emptied it, but somehow i stupidly put itunes there too, so now when on itunes i can't play any songs because it keeps asking me to "Locate" it, which i
-
We are losing memory from the hard drive, how can we resolve this issue?
We are currently have a memory leakage from our hard drive. We have an Apple imac running snow leopard. The memory appears to shrink as we use our computer.. This is a conundrum for us, any advice on how to resolve this issue would be appreciated