CVP- call orginated CVP as media server

In icm scripting, under user.microapp.media_server vlaue node I am using the formula concaetnate("http://",call.RoutingClient,"7000/CVP/audio")
to use the media server same as the call orginated call server.
This works fine for all calls orginated from CVP. But calls orginated from cucm is not bring the right cvp server from
call.RoutingClient. Instead it is always bringing CUCM routing client eventhough I used this node after sendtoVRU node.
Anyone know how can I get the right call server for a cucm orginated call.

As far as i can understand , you are using the CUCM Routing Client to send the Call to the Router , so you are usingas
CTI Route Point registered with the Agent PG IP Address ...
and as far as i know , in order to make it work like you want , i.e : change the routing client to CVP Route Client , you will need a Translation Route Node ....
i would really be HAPPY to know any other method ...
Thanks a lot ,
Ahmed Salah

Similar Messages

CVP Media server config for Agent greeting

Hi All,
How to write agent greeting files to multiple media servers, (4 media servers in our case)
I got to know that setting the default media server to act as a proxy will resolve this issue. Kindly let me know is this correct and how this could be done.?
Thanks and Regards,
Karthik

Hi,
Did you find the solution to this? Can't find anything in the docs.
Thanks
Anthony

Proxy a call to 2 media server

Hello, I have a Xlite ---> Sip Servlet ---> Two media server
What i want is: when xlite send a INVITE msg to the servlet, the servlet send INVITE to the first media server, the media server play a file to the xlite, then send a BYE msg, the BYE is handled by the servlet and not sent to the xlite, instead send a new INVITE message to the second media server to play another file to the xlite.
So it is possilbe to implement this scenario without tearing down the xlite?
Thx in advance.

Hi,
It is not possible.
when you configure the Application System & Integration system in R/3 & XI respectively
By using transaction code SXMB_ADM then you can give only one system value at a time.
Regards,
Rathnakar

Set Variable microapp media server

We have an ICM integration with CVP Server
where we are setting up user.microapp.media_server with value as "http://10.20.40.59:8080"
Question 1
==========
Wanted to check do we need to set the IP address of media server anywhere in ICM Config(Apart from that being referenced in ICM Script)
Question 2
==========
Under Network VRU Script List we have a column as Configuration param.What is that used for.
Thanks
Alok

1. No
2. It could me a lot of different things. It all depends on what type of microapp you're going to use. Look at the CVP Configuration Guide and you will find all the confic parameter values you will need. For example, you will need to set the time out timer, the number of invalid retries, valid values, etc.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp8_5/configuration/guide/ConfigAdminGuide_8.5.pdf pg 158
david

Beginners guide to integrating Flash Media Server 2?

I'm a newbit to Flasha dn flash media server and need some
help with integrating the two products. We've just purchased Flash
Media Server 2 to stream user created videos to a website. Idealy
we would like to use the FlvPlayBack component placed on the stage
to display the FLV file from the media server, but cannont get the
component to access the FLV file.
Media Server Configuration:
On the Media Server we created an application (testapp) with
an default instance (_definst_). The directory path for the
Appliation looks like this W:\MediaApps\testapp\streams\_definst_\
The name of the server is MediaServer
The application and instance are appearing in the Media
Server Admin manager.
I've placed an FLV file (Movie.flv) In the _devinst_
directory.
Flash FLA file
Placed FLVPlayback component on the stage
Set contentpath= rtmp:\\MediaServer\testapp\_definst_\Movie
Set islive=true
When I test publish the file, the video does not display?
Does anyone have any guidance on what I need to do? There
seems to be a lack of documentation on integrating the media
server. I looked a sample app called "SimplePB" that works, but
does not use the FLVPlayback component.
Any help would be appreciated.
Thank you,
John Wallwork

John,
For an FLV to stream from FMS, it must be placed in the
streams/_definst_ directory...
applications/myApplication/streams/_definst_/myFlv.flv
Then you would type in the rtmp connection information in the
contentPath of the FLVPlayback component like this
rtmp://myRTMPConnectionInfo/myApplication/myFlv
without the flv extension.
The documentation comes from the FMS components when you
install them.
Here it is...
To set up your FCS for streaming FLV files:
Create a folder in your FCS application folder, and give it a
name such as my_application.
Copy the main.asc file into the my_application folder.
Create a folder named streams in the my_application folder.
Create a folder named _definst_ inside the streams folder.
Place your FLV files in the _definst_ folder.
To access your FLV files on the Flash Communication Server,
use a URL such as rtmp://my_servername/my_application/stream.flv.
For more information on administering the Flash Communication
Server, including how to set up a live stream, see the FCS
documentation at
www.macromedia.com/support/documentation/en/flashcom/. When playing
a live stream with FCS, you need to set the FLVPlayback property
isLive to true. For more information, see FLVPlayback.isLive.
Regards,
Bill

Using a NAS as media server that can serve computeres and Apple TV directly

What is the best configuration (performance/price/robustness) to have one single scalable, “backupable” location to store videos and music that can act as a media server accessible by several mac and pc computers as well as several Apple TV within the same house (knowing that the Apple TV would access the location directly not going through a computer).

Not quite true. Apple TV can access NAS orginated stream if you share library. I have done this with GForce NAS. The problem is somwhere else. Sharing is limited to streaming music only at 128kbs. You can see all music on your NAS. NAS runs DAAP-MT server (linux based music streaming) for this which you likely need to enable manually (GForce NAS has this)
Another nasty limitation is that you cannot share stream movies from NAS.
That is the reason I have just bought Eee Box (PC with Win XP Home) and I hooked up number of USB drives with movies that I stream to Apple TV. This PC is very small and it takes very little power so, it can be placed in some corner (e.g. in kitchen when some appliances make noise anyway or in basement) and run 24x7. It will behave as NAS, but it will provide proper streaming of video (just install iTunes for PC on it). You do not need keyboard, mouse or monitor for this PC. I use Tight VNC to manage it remotely from one of my Mac computers... meaning Tight VNC service is run on Eee Box while Mac has built in VNC viewer that you can invoke from "Go to computer" window using following url:
vnc://ipaddress_of_eeebox
(BTW Tight VNC does not need viewer on any mmachine as it has built-in web interface for screen management - you just need to use browser on port 5800)
To stream to Apple TV you need to enter those keys that are displayed by Apple TV. You do this via VNC.

Publishing point is not starting in the windows media server

In the setup VCS expressway starter pack is used as call controller & the endpoints are registered to it. TCS is used for recording. A existing publishing point is used for live streaming using windows media server. This publishing point is not started when the recording starts for this recording alias. Windows media server is running locally in the TCS. I could see the below in the server logs. Please note that this setup has worked with this configuration for more than a year and it stopped working now. Your help on this greatly appreciated. Thanks.
13   2015-05-05T14:15:55+03:00   Info: Incoming call [address = 1000, address_type = CALLADDRESS_E164_ALIAS, call_id = 1, protocol = H323, rate = 5952]
14   2015-05-05T14:15:55+03:00   Info: Getting conference binding [booking_address = 003] - No binding found, proceeding with ad hoc call
15   2015-05-05T14:15:55+03:00   Info: Checking recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , record_delay = off]
16   2015-05-05T14:15:55+03:00   Info: Creating recording [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = ]
17   2015-05-05T14:15:55+03:00   Info: Handling RTP packet [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , time_since_first_packet = 1907] - Started writing media
18   2015-05-05T14:15:55+03:00   Info: Creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, remote_address = 5001]
19   2015-05-05T14:15:55+03:00   Info: Updating temp RTP filename in DB [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
20   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
21   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
22   2015-05-05T14:15:56+03:00   Diagnostic: Setting playback main video frame rate [frame_rate = 30]
23   2015-05-05T14:15:56+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 128, channel = audio, payload_type = AAC-LD]
24   2015-05-05T14:15:57+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type = H.264]
25   2015-05-05T14:15:57+03:00   Info: Decoding video, Message from decoder [call_id = 1, decoder = Codian Video, message = Initialized H.264 decoder]
26   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
27   2015-05-05T14:15:57+03:00   Info: Finding output size; bucketing [optimal_output_size = 1280x720(16:9), output_bucket = 796x448, size_ext = 1280x720(16:9), size_main = 512x288(16:9), squared_ext = 1280x720(16:9), squared_main = 512x288(16:9)]
28   2015-05-05T14:15:57+03:00   Info: Transcode settings [extended_frame_rate = 0, extended_size = 1280x720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512x288(16:9), negotiated_bitrate_kbps = 4128, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796x448(199:112), quality = 2, quality_bitrate_kbps = 800]
29   2015-05-05T14:15:57+03:00   Info: Setting up encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, template = <transcode conference_id="904e92bb-9152-4ced-bf29-165f521e34b2" thumbnail_path="E:\data\www\slides\904e92bb-9152-4ced-bf29-165f521e34b2\thumbnails\"><clips action="transcode"/><metadata name="mxe-unicast" speaker="" copyright="" keywords="" description="" date="1430824555"/><writer source="pipnopip"><template codec="windowsMedia" delivery="DELIVERY_ON_DEMAND" qualitybitrateK="800" layout="pipnopip" piplocation="top/right" quality="Medium"/><output type="file" guid="e1ab0747-bbb4-44f0-b7de-2644e3921e63" directory="E:\data\media\"/><output multicast="false" multicast_address="" multicast_port_start="0" multicast_ttl="0" type="serverpush" guid="e952a7fc-87dc-4944-b26a-064c9897c3de" wwwdir="E:\data\www\" server_name="xxx.xxx.xxx.xxx" username="admin" password="********" port="8080" publishing_point_copy="" publishing_point=""/></writer><callinfo bitrateK="4128" hasaudio="true" hasextended="true" hasvideo="true" videoFrames="0" extendedFrames="0" duration="0" mainres="512x288" maindar="16:9" extres="1280x720" extdar="16:9"/></transcode>]
30   2015-05-05T14:15:57+03:00   Diagnostic: Setting thumbnail timer zero point [call_id = 1, zero_point = 0]
31   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
32   2015-05-05T14:15:57+03:00   Info: Decoding audio, Message from decoder [call_id = 1, decoder = Codian Audio, message = Initialized AAC-LD decoder 128000bps]
33   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
34   2015-05-05T14:15:58+03:00   Last message repeated 5 times
35   2015-05-05T14:15:58+03:00   Info: Setting output path [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
36   2015-05-05T14:15:58+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
37   2015-05-05T14:16:04+03:00   Last message repeated 25 times
38   2015-05-05T14:16:04+03:00   Info: Checking memory use [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
39   2015-05-05T14:16:08+03:00   Warning: Reporting Windows Media writer status, Error occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080/_3868463432921, error = error code = (0x80072eef)]
40   2015-05-05T14:16:08+03:00   Info: Adding Windows Media serverpush output [call_id = 1, async = 0x80072eef] - After wait

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

How to pass an image from the mobile application to the Adobe Media Server?

The image is taken as photo from the CameraUI in the Client Side(AIR Mobile Application) and saved as a .jpg file in the mobile. I passed the image byte array values from the client to the server. How to convert that byte array to a file in the Adobe Media server?

This is very similar to the problem here:
http://forums.adobe.com/thread/655314
processByteArray = function(byteArrayAsPlainObject){
     // byteArrayAsPlainObject is an object serialized from a ByteArray but without functions
     // we need to get a ByteArray that we can call functions on
     var usableByteArray = new ByteArray();
     byteArrayAsPlainObject.position = 0; // make sure we start from the beginning
     ByteArray.prototype.readBytes.call(byteArrayAsPlainObject, usableByteArray);
     // now usableByteArray contains what was in the original argument, but we can actually use it on the server side

Audio not streaming correctly from Flash Media Server

Our company has a Flex application (3.0.2) that is having a problem with audio dropping out in Windows 7. The problem appears worse with a wireless connection, but it can’t be consistently reproduced there, either. The only thing known for sure is that the problem has not been seen on any other version of Windows.
The application thinks the audio is playing, because it is calling the appropriate event listeners triggered when the audio completes and when any audio cue points are hit. The majority of our audio is streaming via Flash Media Server (3,0,2,201), but the problem was also seen using embedded sound effects. In one instance, several clicks of a button triggered an error saying the sound effect could not be loaded, and then about a minute later, all the sound effects played at once and the user could then continue with the application.
The problem has been repeated in IE 8, Firefox 3 and Chrome.

Thanks for your details. But i need more info.
Server:
FMS      3.0.2 ?
FMS installed in which platform Linux/windows? more details about it.
Client:
IE          7
Flash Player version     ?
WIndows 7
Wireless connection - Was the client placed in poor bandwidth.
Can you get the NetStream status info when u play the audio file.? We can check for the rebuffering happening at the client side.
Can you run your audio file through flvCheck Tool to check if the media file is in good form. It is available at "\$Root|Flash Media Server\tools\flvcheck.exe"
Now our intention should be to check the same media file with simpler application (since your production app is complicated) to ensure that the media streaming over 'client to server' is working fine.
Regards,
Janaki L

ITunes and LaCie Big Ethernet Disk -- Media Server

I have LaCie Big Ethernet Disk (1TB). The drive has a feature called Media Server, you setup a directory copy over your music, photos, and videos. The drive shares your music via UPaP, it shows up in iTunes as a shared music directory. The problem I'm having is I see the drive in iTunes under SHARED, but none of the music files are listed. My files are mixture of MP3, AAC and Apple Music Store Files. So far I've tried these things:
- toggling the shared checkbox on and off - no luck.
- Created a new iTunes Library - no luck.
- Created a new share directory on the drive - no luck.
I've contacted LaCie tech support which were not very helpful. They think its an iTunes problem. Does anyone have any suggestions, things to try, anything?
Thanks - CH

The protocol itunes uses for it's shared libraries is daap, I believe. Depending on how large your library is, it may take quite a while for the server to index the library you are trying to share. It also may choke on files with unconventional characters in their names or for other reasons. my best advice to you would be to try sharing a different folder containing a few music files and see if you can get that to work. Once you know it works correctly you can start checking to see if there are certain files that are causing it to fail, or if your just not waiting long enough for the server to index your music folder.

A User Count in a Flash Media Server Application

hello guys, first of all, sorry for my english...
i am making a flash media server application and i want users to see that how many users are currently connected to this application...
i have searched on google for 2 days and i couldnt find a good tutorial for AS3.
i have looked at fmsguru and some other tutorial websites but those wasn't enough for me to succes...
what i am trying to make is; a text area or dynamic text (i dont know which is most suitable for this purpose) which shows the numbers of connected user and i want it change immediately when a user connects or disconnects...
i know there is an array as "application.clients" and i know i should use "application.clients.length" in "main.asc" file to find the number of connected users BUT i can't get this number to the text area or dynamic text in my "swf file".
PLEASE help me by explaining a simple application which uses a "main.asc" file, an "action script" file and a "swf" file. and how to get the number of "application.clients.length", how to send (or call or get) it to the "action script" file, how to show this number in a text field or dynamic text...
i will be very appreciated if someone explain in AS3 and make me success...
thanks for reading...

well here you don't even need the button just tell your textfield to update everytime the server calls after a connection or disconnection. Do you know how to write actionscript at all? Because you would be well advised not to attempt media server stuff unless you know how to do the basics. Maybe you could start out with some client only applications.
import mx.controls.TextArea;
import mx.controls.Button;
import mx.utils.Delegate;
class SimpleChat_call extends MovieClip {
private var myTextArea:TextArea;
private var myButton:Button;
private var _nc:NetConnection;
private var _chatSO:SharedObject;
private function onLoad() {
myButton.addEventListener("click", Delegate.create(this, onUserCount));
public function connect( rtmpString:String) {
_nc = new NetConnection();
_nc.owner = this;
_nc.onStatus = function ( info ) {
if(info.code == "NetConnection.Connect.Success") {
trace("connected successfully");
this.owner.connectSO( this );
_nc.receiveUsercount = function (count) {
var myTextArea = this.owner.myTextArea;
myTextArea.text = count;
_nc.connect(rtmpString);
private function connectSO( nc ) {
_chatSO.connect( nc );
you didn't even try what i suggested did you because it would have worked without changing the client

EA4500 - Serviio Media Server Setup

I have Serviio Media server on my Windows 7 PC and I want to view files using my iPad. This worked for me before I upgraded my network to the EA4500. Does anyone have step by step instuctions on how to make Serviio work using the EA4500? I think I have to "open" up a couple of ports, but not sure how to do that with the EA4500 UI. Thanks.

Is the router on Smart Wi-fi firmware right now or still on the Classic? It is best to obtain the ports for the Serviio by calling their tech support. If the router is still on the Classic firmware, you go to Applications and Gaming and do port range forwarding for the Serviio. For the Smart Wifi firmware, you click Security on the side panel and click Apps and Gaming and then go to Port Range Forwarding. I found a link for Serviio setup in google, click here.

Presenter 7 work with media server 3.5

as title says, I am newish to adobe stuff, I have a client that has some swf files that we are going to replace with content created in presenter, will there be any issue with hosting/serving the content created in presenter 7 with adobe media server 3.5?
also if I am missing something big that makes this question stupid/pointless could someone please tell me?
Thanks

Technically, there shouldn't be any issue. The media server is there to deliver your flash content, so the fact that it came from Presenter is not really the issue here. I would just test it by putting the published files in a media file on your server and then using the appropriate URL call to the index.swf or index.html file.

How to integrate flash media server 4.0 live streaming for iOS devices ?

Hi All,
I have website which has live streaming module its working fine, same module i want to integrate for iOS devices. For live video streaming we are using FMS 4.0. So please let me know how we can integrate this for iOS devices using flash media server 4.0.
Thanks in Adavnce
Mohammad Sharique

You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

Yesterday's Updates to Dynamic Link Media Server

I woke to find four updates to CS6 (Au, Ae, Ps, and Pr) yesterday, which the Updater called "Dynamic Link Media Server CS6 1.0.1 Update."
I updated, and I updated my CUDA about the same time.
Pr started working slower. So, I reverted back, using my clone.
Not sure if this was a coincicence, or which update to blame.
I'm back to the performance from both that I was used to.
The CUDA update was for bugs I wasn't experiencing and for compatibility to 10.8, which I'm not running.
Was I too hasty? Do these Dynamic Link updates do anything? Improve anything?
MacPro3,1 - CS6 - Quadro 4000 - 10.7.4

I don't doubt your engineer for a second. I'm convinced now that the nVidia or most likely the CUDA driver is behind all my Serious Errors. I was getting them right after opening a project and trying to do anything at all today. I turned CUDA off, and was able to finish the project. When that was out the door, I reinstalled the CUDA and nVidia drivers, rebooted, opened my project, enabled CUDA, and Pr has been working without the errors.
Thank you, Todd!

CVP- call orginated CVP as media server

Similar Messages

Maybe you are looking for