CVP Comprehensive - Calls Droped when agent answer

Hi,
Currently i have a CVP 7.0(2) es 22 and CUCM 7.5(8), I noticed that sometimes Calls routed to agent are getting dropped, and on the Ingress Gateway i'm watching disconnections because of User Busy (some show commands are attached).
Call flow is simple:
Ingress GW -> CallServer ->Agent if ready, if not then queue.
On CVP i'm getting this error very frequently
%CVP_7_0_SIP-3-SIP_CALL_ERROR: CALLGUID = 94573CAB628C11DF8EEB8D236821F970 LEGID = 9459ADE3-628C11DF-8EF08D23-6821F970 - [INBOUND] - DIALOGUE_FAILURE from ICM Router sends 500 rejection to call. [id:5004]
So i think that once the call is getting routed to the agent the call disconnects by whatever reason, but that whatever reason is what I'm unable to find.
This happens just sometimes, I've seen this error before, when the Device Target does not have a label or when SIP trunk have incorrect CSS on the configurations. But on all those cases happens on all calls or exact extensions... this time happens randomly some calls complete on agent and some calls not.
Any experience on issues like this one will be appreciated.
Regards,
Claudio.

Hi
I've noticed there is a bunch of traces like this:
13:18:37 ra-rtr Trace: Received 3 AgentSkillGroup logout entries from CM_PG_1
13:22:21 ra-rtr Trace: ATR rule not found for agent 5018 at ext 3111. Device target had label 3111 (ID 5035).
13:25:22 ra-rtr Trace: ATR rule not found for agent 5026 at ext 3114. Device target had label 3114 (ID 5038).
13:27:06 ra-rtr Trace: ATR rule not found for agent 5032 at ext 3123. Device target had label 3123 (ID 5056).
13:28:24 ra-rtr Trace: ATR rule not found for agent 5024 at ext 3117. Device target had label 3117 (ID 5048).
I attached the log files on a zip file.
I've noticed this is really ofthen, at less every 1 or 2 minutes.
Any help will be appreciated.
Thank you,
Claudio.

Similar Messages

  • CAD Application gets Hanged for UCCE 7.5.1 when agent answered the call for particular location

    Hi All,
    We have a CAD server installed on ICM PG box.
    Two agent location namely X and Y
    Datacenter resided in location X
    Users in location X were not facing any issue
    Users from location Y facing diificulties and they were using CAD ver 7.5.1.
    Randomly for all the users in location Y were reporting CAD application gets Hanged immediately when the agent answer the call.
    Location Y is connected via WAN.
    Both the location we are using same CAD version, but still issue persist in location Y.
    Kindly let me know how to address this issue
    If this was a BUG why it was not impacting other location

    Hi,
    I found the problem in CAD Troubleshooting guide.
    Problem: Agents can’t log into Agent Desktop.
    Solution: During Unified ICM installation, an “Agent Login Required for Client Events” check box is displayed. By default this check box is unchecked. It must remain unchecked for agents to be able to log in. If the check box was checked during Unified ICM installation, you must reinstall Unified ICM and make sure the check box remains unchecked.
    I reinstalled CTI Server without that checkbox and now the agent is able to login.
    Thanks all for your help.
    Cristian

  • How to change caller ID when agent is still ringing

    Hi all,
    I'm using UCCX 8.5. When there is a call from outside to a contact center and when agent is still ringing, the caller ID presented in the agent is CTI port number of UCCX. I wonder if it is possible to change this CTI port number to outside caller's phone number.
    Thanks.

    Sorry, but no. This is because CCX does the equivelent of a warm transfer to the agent's ACD line. Until the transfer completes you do not see the original calling party information. You'll want to look at the CAD or IPPA Enterprise Data to see the ANI/Caller ID.

  • UCCx 8 Callback when agent is in Ready State

    To all,
    I am stuck.  Here is the basic logic for my callback caller script when agent is in Ready state.  After the Get Digit String step, what should I do to terminate the call and keep the script running?
    Select Resource (--Triggering Contct--from CSQ)
              Connected
              Queued
                   Menu
                        CallbackNumber = Get Digit String (--Triggering Contact--)
                                  succesful
                                       If(stat_ReadyResources_OF_CSQ > 0) then
                                                True
                                                   outcallToCaller = Place Call (to callbackNumber)
                                                          successful
                                                                 Call Redirect (--Triggering Contact--to Overflow Q)
    * OverflowQ is another script.
    Thanks,
    Nelson

    Set the contact as still being active, even though no one is there.  You will not be able to play any prompts or anything to that contact though, that will result in errors, unless you catch the error.  You can of course redirect playback to the contact that you call.
    ErrorReason = Get Trigger Info (Aborting Reason)
    On Exception (ContactInactiveException) Goto Begin
    Delay 2 sec
    Accept(--Triggering Contact--)
    Delay 4 sec     <---Hang up before these 4 seconds are done.
    Begin:
    Clear Exception (ContactInactiveException)
    Set Contact Info (--Triggering Contact--)
         Language: strLanguage  (I have a Language varible named this with the value L[en_US] )
         Handled:
         Session: strSession (I have a Session varible named this with the value null )
    I edited this to add the delay and accept steps, so you would know the proper order for them to be in.  I have a script that calls customers and asks if it is ok to fax them documents to that line in the next 5 minutes.  So they know to let the call go to their fax.

  • Set calls to automaticaly go back in a ready state when not answered

    What I would like to do is when a call is not answered and it is dropped into a not ready state so it can be presented to the next Agent is have that agent that was put in a NOt Ready State come right back to a ready state. That way the Person does not have to re-selct the ready State button they can auto take the the next call. I hope I explained this correctly
    Thank you
    Dave

    Hi David,
    Yes, the call will be still held at Queue if someone doesn't answer it in the CSQ, it will try to reach the next available agent based on the criteria selected inside the CSQ.
    One thing which is to be considered while making Agents to go to Ready state automatically after RONA (Ring On No Answer) is, if the Agents take long time to return back to their seat and start handling calls, there might be many calls who have landned (depends on the call volume and Agent count) on their phones but due to non-availability of Agents , the overall call wait time will increase accordingly.
    Hope it clarifies.
    Anand
    Please rate helpful posts..

  • The only time the sound/speaker and mic don't work is when I answer or make a call

    The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&amp;T said it's Apple and Apple said it's AT&amp;T. I've been around that cycle twice. 
    When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
    If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in. 
    I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible. 
    Hopefully the following will provide good clues:  On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

    Let me try and address some of your questions.  I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
    First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone.  So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes.  On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them.  In iTunes, you can go to Store > Check for available downloads. )
    Whenever you plug your phone in, it should create a backup of everything you have on the phone.  This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone.  You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup.   If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
    The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
    You should have no problems restoring from a backup if they give you a new phone.  However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device.   I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
    I've had no problems with my new phone so far.
    I'll try to keep checking this thread if you have any other questions or need more clarification.
    Edit: I should say we never did figure out what exactly was wrong with my phone.  The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one.  But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else.  Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
    Also if you don't already have one, make a genius appointment ASAP.  Most stores are very busy and their appointments fill up fast.  I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you.  The easiest way to make an appointment is to download the Apple Store app.  It detects the closest Apple store from you and makes it quite easy to schedule a genius.
    Message was edited by: deddinty

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

    I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

    Morning Lupoipia,
    Thanks for using Apple Support Communities.
    If you can't be heard by someone who is calling, take a look at this article:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    My iPhone 4S has a blank black screen but when someone calls me I can answer it, I just can't see anything

    Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • Agent stay in Ring when agent not answer

    Hello,
    how long agent stay in ring  when agent not answer  before forwarding to the next agent?
    Is it possible to change the time?

    Hi,
    in UCCE: check the Agent Desk Setting (in Configuration Manager) for the particular agent, "Ring no answer time".
    In UCCX: check the Timeout parameter in the Select Resource step in your script.
    Either way, the value on the UCCE/UCCX side must be lower than the Forward No Answer timeout in CUCM.
    G.

  • Phone calls end when answering a FaceTime call.

    I'm having trouble with Face Time, when I answer the phone call then the call end. What could be wrong?

    Hey tjunius1, 
    Welcome to Apple Support Communities. 
    Take a look at the article linked below which provides troubleshooting tips that can help you resolve the issue making FaceTime calls on your iPhone.
    If you can't make or receive FaceTime calls - Apple Support
    Cheers,
    -Jason

  • Ios 5 when i answer a phone call,  application audio  overrides phone call

    often an app i used earlier to play audio starts up again when i answer a phone call... It is not actively in use at the time the call comes in, just has to be one of the apps used recently. I have had to manually forcequit app to get it to stop plaing and overwhelming the phone call.
    This happens on 3gs as well as 4s. Same ios level.

    That sounds like a problem with the app it self. What app is it? However, it is possible a reset will fix that. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This will not affect data in any way.

  • TS3367 My wife just activated her Iphone5 and when we received a FaceTime call today both her phone and the IPad rang. When we answered on the IPad we could only see the calling party in a portrait view and not a landscape view. When we turned the IPad to

    My wife just activated her IPhone5 today and when we received a call to FaceTime both her phone and IPad rang. When we answered the call on the IPad the callers image only appeared in the portrait mode and any attempt to rotate the Ipad to the landscape mode did not change anything. Any suggestions?

    Ortho25 wrote:
    ...  when we received a call to FaceTime both her phone and IPad rang. ...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Ortho25 wrote:
    ... any attempt to rotate the Ipad to the landscape mode did not change anything. ..
    Settings > General > Lock Rotation..
    Understanding the Side Switch
    http://support.apple.com/kb/HT4085
    Orientation Lock
    Not all Apps offer this feature..

  • FaceTime says failed when I answer a call or when the iPad is answered it says user not available

    My husband has been gone for a couple weeks with the iPad.  We've been FTing for 2 weeks and then its stopped working.  I can hear it ring but when I answer it, it says FT failed.  Or if I call him, and he answers it says user unavailable.  Now sometimes I hear it ring but there is now way to anwer the call, no window pops up or anything.

    Thank you so much! I let my husband use my phone last night and he thinks he pushed it by mistake. Thanks so much for your help Meg!

  • When I cancel a call or don't answer the touch is not working

    When I cancel a call or don't answer the touch is not working

    To mute:  Press vloume down button.
    To disconnect:  Press display off and on button on top.
    Delete messages from Inbox: Click "Edit" button on top left and select the messages you want to delete.

Maybe you are looking for

  • Safari won't open the time warner cable server

    safari won't open the time warner cable server, I'm trying to watch amc shows through the website, and it asks you to pick a server to login to. I chose my time warner cable server and it won't connect. ATandT works, but mine won't. I've tried restar

  • Edit HTML FORM for Travel Request in BADI

    Hi Experts, I'm trying to use the BADI FITP_REQUEST_HTML_FORM_BADIDEF to edit the HTML form for travel request. I need to add and hide fields in tables, but I don't need to create new tables in the form. The example is like the following:   CALL METH

  • Change documents for default values in user profiles

    Dear Experts, Please let me know if there are any tables to find the changes that have been made to the default values in a user profile. Regards, Lakshmi.

  • When editing in Photoshop CS6 I lose the noise reduction applied in Lightroom 4

    When I apply the noise reduction in LR4 & 4.1 it's awesome until I send it to photoshop CS6 for editing...there the noise returns somewhat with larger spots highlighted (have to remove with spot healing)... looks even worse when I bring it back to Li

  • Small library management software

    Howdy, archers! I've been looking for a library management software, because there is a small collection of English and German books, video tapes and whatnot here in my university, and people want to replace the Access database someone made long ago