CVP DBLookup cursor/concurrency type

I was just wondering if anyone has used the standard DBLookup step in CVP against an SQL 2005 database.
I have developed a simple CVP application which does database lookup on the DTMF digits entered, to select a single field from the database based on the digits.
In tomcat, I am getting the following error. "com.microsoft.sqlserver.jdbc.SQLServerException: The cursor type/concurrency combination is not supported"
This is using the standard CVP studio DB Lookup step and occurs when restarting tomcat when it tries to load my application. Is there something I need to do to successfully connect to a SQL 2005 database?
Thanks
Alex

Hi Geoff,
I appreciate your help.
The context.xml and web.xml are defined in the .../VXMLServer/Tomcat/conf folder
I have defined the JNDI in the context.xml. (I've removed the IP Address and passwords).
 WEB-INF/web.xml
 jdbc/MOTS_DB"
 auth="Container"
 type="javax.sql.DataSource"
 maxActive="100"
 maxIdle="30"
 maxWait="10000"
 username="mots"
 password=""
 driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDriver"
 url="jdbc:sqlserver://:1433;DatabaseName=MOTS_DB;"/>
In the web.xml folder I have defined the following:
 MOTS
 jdbc/MOTS_DB
 javax.sql.DataSource
 Container
This is my DBLookup.xml file
<?xml version="1.0" encoding="UTF-8"?>
single
MOTS_DB
SELECT SkillGroup FROM MOTS WHERE MOTS={0}]]>
Here is the error. This is on the .../logs/GlobalErrorLog
12/06/2011 02:33:35.493, SERVER ERROR: An error occurred while loading application 'ATT_Enter_MOTS'.
com.audium.server.AudiumException: There was a problem creating the database tables for the user management system.
 at com.audium.server.controller.AudiumServerConfiguration.initialize(AudiumServerConfiguration.java:856)
 at com.audium.server.controller.AudiumServerConfiguration.initializeAll(AudiumServerConfiguration.java:739)
 at com.audium.server.controller.ControllerInitializer.(Controller.java:3484)
 at com.audium.server.controller.ControllerInitializer.doInitialization(Controller.java:3501)
 at com.audium.server.controller.Controller.init(Controller.java:371)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
 at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
 at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
 at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
 at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
 at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
 at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
 at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:825)
 at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:714)
 at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490)
 at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
 at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
 at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
 at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
 at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
 at org.apache.catalina.core.StandardService.start(StandardService.java:448)
 at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
 at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
 at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Root Cause: com.audium.server.userManagement.LoggingException: com.microsoft.sqlserver.jdbc.SQLServerException: The cursor type/concurrency combination is not supported.
 at com.audium.server.userManagement.ApplicationLogger.getApplication(ApplicationLogger.java:78)
 at com.audium.server.userManagement.UserManagementLoggerAPI.getApplication(UserManagementLoggerAPI.java:132)
 at com.audium.server.userManagement.UserManagementLoggerAPI.addApplication(UserManagementLoggerAPI.java:120)
 at com.audium.server.controller.AudiumServerConfiguration.initialize(AudiumServerConfiguration.java:853)
 at com.audium.server.controller.AudiumServerConfiguration.initializeAll(AudiumServerConfiguration.java:739)
 at com.audium.server.controller.ControllerInitializer.(Controller.java:3484)
 at com.audium.server.controller.ControllerInitializer.doInitialization(Controller.java:3501)
 at com.audium.server.controller.Controller.init(Controller.java:371)
 at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
 at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
 at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
 at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
 at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
 at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
 at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
 at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:825)
 at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:714)
 at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490)
 at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
 at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
 at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
 at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
 at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
 at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
 at org.apache.catalina.core.StandardService.start(StandardService.java:448)
 at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
 at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
 at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)

Similar Messages

To Use Cursor or TYPE table Index by PLS_integer

Hi All,
Let's see if I have table with no. of records 19,26,20,000.
If I want to loop through all the records which will be a optimized way To Use Cursor or TYPE table Index by PLS_integer.
Please guide.
Thanks.

What is it you want to do to/with the rows you're looping through?
Ideally you want to avoid looping, as that's row by row (aka slow by slow) processing and it's expensive time-wise.
If you're doing DML (insert/update/delete) then you're best off doing it in one sql statement, rather than looping.

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DB proc - do you need to create a table to pass a ref cursor record type?

I want to pass a limited selection of columns from a large table through a DB procedure using a REF CURSOR, returning a table rowtype:
CREATE OR REPLACE package XXVDF_XPOS_DS021_ITEMS AS
     TYPE XXVDF_XPOS_DS021_ITEM_ARRAY
     IS REF CURSOR
     return XXVDF_XPOS_DS021_ITEM_TABLE%ROWTYPE;
Do I need to create this dummy table?
I can't get a TYPE to work, where the type is an OBJECT with the desired columns in it.
So a dummy empty table will sit in the database...
Is there another way?
thanks!

You can use RECORD type declaration:
SQL> declare
2   type rec_type is record (
3    ename emp.ename%type,
4    sal emp.sal%type
5   );
6   type rc is ref cursor return rec_type;
7   rc1 rc;
8   rec1 rec_type;
9 begin
10   open rc1 for select ename, sal from emp;
11   loop
12    fetch rc1 into rec1;
13    exit when rc1%notfound;
14    dbms_output.put_line(rec1.ename || ' ' || rec1.sal);
15   end loop;
16   close rc1;
17 end;
18 /
SMITH 800
ALLEN 1600
WARD 1250
JONES 2975
MARTIN 1250
BLAKE 2850
CLARK 2450
SCOTT 3000
KING 5000
TURNER 1500
ADAMS 1100
JAMES 950
FORD 3000
MILLER 1300or use, for example, VIEW to declare rowtype:
SQL> create view dummy_view as select ename, sal from emp;
View created.
SQL> declare
2   type rc is ref cursor return dummy_view%rowtype;
3   rc1 rc;
4   rec1 dummy_view%rowtype;
5 begin
6   open rc1 for select ename, sal from emp;
7   loop
8    fetch rc1 into rec1;
9    exit when rc1%notfound;
10    dbms_output.put_line(rec1.ename || ' ' || rec1.sal);
11   end loop;
12   close rc1;
13 end;
14 /
SMITH 800
ALLEN 1600
WARD 1250
JONES 2975
MARTIN 1250
BLAKE 2850
CLARK 2450
SCOTT 3000
KING 5000
TURNER 1500
ADAMS 1100
JAMES 950
FORD 3000
MILLER 1300 Rgds.

Ref cursor return type

i am using a ref cursor as out parameter in a stored procedure.
When I call the stored procedure and want to retrieve the rows returned by the ref cursor,
is there a way to fetch the records using something like %ROWTYPE if I donot know the type of rows returned by the cursor.
eg.
procedure my_test_ref_cursor ( a OUT SYS_REFCURSOR) IS
BEGIN
OPEN a FOR SELECT EMP_ID, EMP_NAME FROM EMP;
END;
procedure call_my_test_ref_cursor is
b sys_refcursor;
begin
my_test_ref_cursor(b);
fetch b into XXXXXXX - if this program doesnot know the type of ref cursor 'b' is pointing to is there a way to use
something like %ROWTYPE here ?
end;

While you can use the logic to return a weakly typed reference cursor, there should be a compelling why. A strongly typed reference cursor may be a better solution. You define a strongly typed reference cursor inside a package, and you anchor it to a ROWTYPE. Weakly typed reference cursors are typically useful when you are working with a subset of a table because you can't anchor to part of a table. However, you can define a view that uses the portion of the table and anchor a strongly typed reference cursor to the view.
A strongly typed PL/SQL reference cursor is defined like this in a package specification:
TYPE strongly_typed_cursor IS REF CURSOR RETURN some_table%ROWTYPE;
So, if you rewrote it like this ...
PROCEDURE my_test_ref_cursor (a OUT SOME_PACKAGE.STRONGLY_TYPED_CURSOR) IS
BEGIN
OPEN a FOR SELECT emp_id, emp_name FROM emp;
END;
Now, you can access it like this ...
PROCEDURE call_my_test_ref_cursor IS
another_var SOME_PACKAGE.STRONGLY_TYPED_CURSOR;
target SOME_TABLE%ROWTYPE;
BEGIN
my_test_ref_cursor(another_var);
LOOP
FETCH another_var INTO target;
EXIT WHEN another_var%NOTFOUND;
dbms_output.put_line('See it '||target.emp_name||'.');
END LOOP;
END;
The DBMS_SQL method you're looking for is Method 4. My recollection is that there isn't a good example in the docs but I could be wrong ... The OCI works no differently, nor does the JDBC interface. Hope this helps.

Please Help. Mom's Glaucoma Needs Large Cursor To Type With

Hello!
I really desperately need help here. My mom has glaucoma and still trying to write long letters to her fam and friends. She prefers a black background and white lettering with Arial 72, bue still has bad trouble trying to see a cursor to move the mouse by. I'm trying to use Mariner Write and OpenOffice and Bean and Text Edit to find a program that can oversize the cursor or turn it into a thick block cursor and if possible change it to a red color for better contrast as well. I went through the docs and manuals of these programs but they don't seem to allow you to change the cursor much. Is there any way?
I'll be posting this at those text processor forum sites as well, but in case any of you here know any tricks I'm posting here too, hopefully in the right topic.
We'd appreciate any help at all!
Thank you,
Trudi

Accessiblity options in System preferences.
http://att.macrumors.com/attachment.php?s=74d512f55aa351986a067682eddd4df0&attac hmentid=165942&d=1238972770

IMac 2008 OSX 10.7.5 cursor jumps types wrong order

Hi everyone,
I have problems with the cursor on my mac.
It jumps backwards when typing so the words end up in the wrong order if I'm not watching it.
Sometimes it simply deletes words without being asked.
Web pages also occasionally jump down the page immediately on loading.
I use a usb keyboard and now a bluetooth trackpad but it behaves the same with pad or mouse.
While I was typing this it put "now a bluetooth track" between "deletes" and "words".
Is it me or gremlins?
Thank you for any help.
Cheers.

Hi,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for jumping problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Odd error while opening a ref cursor

Hi.
I have a procedure in a package that has both in and out parameters. One of those out parameters is a ref cursor. The procedure creates a dynamic query and then executes it, then it opens the cursor:
PROCEDURE PROC(
A IN VARCHAR2,
B IN VARCHAR2,
C OUT TYPES.cursorType; --(TYPES is a package whose only use is to declare a cursor type)
) IS
--DECLARATIONS
OPEN C FOR 'SELECT A, B, C, D...';
END;
When I execute the package in an anonymous block it throws the error:
ORA-00938: not enough arguments for function, just in the line where the cursor is being opened.
Any ideas?

is everything defined correctly?
create or replace package types as
type cursorType is ref cursor;
end types;
SQL> set serveroutput on
SQL> declare
2
3    ref_C types.cursorType;
4
5    v_a varchar2(1);
6    v_b varchar2(1);
7    v_c varchar2(1);
8    v_d varchar2(1);
9
10    procedure Proc (a in varchar2
11                   ,b in varchar2
12                   ,C out types.cursorType) as
13
14      begin
15        open C for 'select :1, :2, ''c'', ''d'' from dual' using a, b;
16    end Proc;
17 begin
18
19
20    Proc('a', 'b', ref_C);
21
22    fetch ref_C into v_a, v_b, v_c, v_d;
23    if (ref_C%found) then
24      dbms_output.put_line(v_a);
25      dbms_output.put_line(v_b);
26      dbms_output.put_line(v_c);
27      dbms_output.put_line(v_d);
28    end if;
29
30
31 end;
32 /
a
b
c
dP;
Edited by: bluefrog on Feb 18, 2010 6:07 PM

Cannot figure out why "ORA-01000 Maximum open cursors" is shown...

Hello there ...
I am programming a PL/SQL Code that is throwing 0RA-01000 Maximum Open Cursors Exceeded.
Having already read quite a lot about ORA-01000 errors, I know I should be closing cursors, and have already tried setting OPEN_CURSORS parameter to a high number (1000).
I declared a lot of procedures in my pl/sql, each of which uses one cursor since i am working with a non-Oracle table linked by ODBC ... and each procedure sometimes does thousands of inserts -- but all WITHIN the explicit cursors. The explicit cursors are not declared within each loop.
I already checked the code many times, and made sure all open cursors are closed. In addition, I also verified the numberopen cursors generated by the PL/SQL by running the following SQL after every procedure i run... and outputting it... and it appears the value just keeps on increasing, even though I had explicitly closed all the cursors in all the earlier procedures.
What is funny is that the most number of cursors reported by the code below only hits 150+ cursors. Nowhere near the 1000 open_cursors limit per session.
select a.value into strtxt --, b.name
        from v$mystat a, v$statname b
        where a.statistic# = b.statistic#
        and a.statistic#= 3;When I run the procedures separately though, all the procedures run smoothly (even when I had not yet updated the open_cursors parameter).
I was thinking of the following, but maybe you have some other ideas?
Does this have anything to do with my procedures not being stored procedures?
Or should i be committing records within my procedures instead of out of it?
I really have run into a wall and would really appreciate any tips or helps on this. Thanks in advance!
My basic pl/sql code looks like below. I did not give the actual details cause it will be too long (up to 5000 lines).
DECLARE
PROCEDURE proc1
IS
    CURSOR cur_hca
       is
           select ...from..where;
   TYPE cur_hca_fetch
        Is TABLE OF cur_hca%ROWTYPE
            INDEX BY PLS_INTEGER;
    temp_collect cur_hca_fetch;
BEGIN
   open cur_hca;         --cur_hca is the cursor name.
                                  --i use exactly the same cursor name in the other procedures
      loop
         fetch cur_hca bulk collect into temp_collect LIMIT 1000;
         exit when temp_collect.count=0
         for indx in 1 .. temp_collect.count
            loop
              ...run some sql
            end loop;
      end loop;
close cur_hca;
END proc1;
PROCEDURE proc2   --almost the same as above the only changes are the query for the
                             -- cursor and the sql that happens for each record
IS
BEGIN
   open cur_hca;         --cur_hca is my cursor name
      loop
      end loop;
close cur_hca;
END proc2;
... up to 40 other very similar procedures
BEGIN
   proc1;
   commit;
   select a.value into strtxt
        from v$mystat a, v$statname b
        where a.statistic# = b.statistic#
        and a.statistic#= 3;
DBMS_OUTPUT.PUT_LINE('Number of Cursors After STATUSproc1: ' || strtxt);
   proc2;
   commit;
   select a.value into strtxt
        from v$mystat a, v$statname b
        where a.statistic# = b.statistic#
        and a.statistic#= 3;
   DBMS_OUTPUT.PUT_LINE('Number of Cursors After STATUSproc2: ' || strtxt);
   ... 40 other procedures
END;Edited by: user4872285 on May 6, 2013 6:49 PM
Edited by: user4872285 on May 6, 2013 7:01 PM
Edited by: user4872285 on May 6, 2013 8:02 PM
Edited by: user4872285 on May 6, 2013 8:03 PM

PL/SQL code usually leaks reference cursors and DBMS_SQL cursors - as the ref cursor/DBMS_SQL interface used has a global (session static) scope.
PL/SQL has an intelligent garbage collector that will close local implicit and explicit cursors, when the cursor variable goes out of scope.
If you define an explicit cursor globally (package interface), then it can only be opened once. The 2nd attempt results in a ORA-06511: PL/SQL: cursor already open exception. So code cannot leak explicit cursors as code cannot reopen an existing opened explicit cursor.
I have never seen Oracle leaking cursors internally. So I would be hesitant to call what you are seeing, a bug. If your code is using explicit cursors (even static/global ones), your code cannot leak these cursors, even if your code does not close them. Worse case - the cursor remains open, however new copies cannot be created while it is open.
So I think your are looking at the wrong thing - explicit cursors. These are not the cursors that are leaking in my view (simply because code cannot reuse and open an already opened explicit cursor). Here is an example:
SQL> show parameter cursors
NAME                                 TYPE        VALUE
open_cursors                         integer     300
session_cached_cursors               integer     50
// procedure that seems to "leak" an explicit cursor handle
// as it does not explicitly closes the handle
SQL> create or replace procedure CursorUse is
2          cursor c is select e.* from emp e;
3          empRow emp%RowType;
4 begin
5          open c;
6          fetch c into empRow;
7          --// not closing explicit cursor handle
8          --// and going out-of-scope
9 end;
10 /
Procedure created.
// current session stats
SQL> select b.name, a.value from v$mystat a, v$statname b where a.statistic# = b.statistic# and b.name like '%open%cursor%';
NAME                                  VALUE
opened cursors cumulative                91
opened cursors current                    2
// execute proc that "leaks" a cursor, 10000 times
SQL> begin
2          for i in 1..10000 loop
3                  CursorUse;
4          end loop;
5 end;
6 /
PL/SQL procedure successfully completed.
// no errors due to cursor leakage
// session stats: no cursor leakage occurred as
// PL/SQL's garbage collector cleaned (and closed)
// cursor handles when these became out-of-scope
SQL> select b.name, a.value from v$mystat a, v$statname b where a.statistic# = b.statistic# and b.name like '%open%cursor%';
NAME                                  VALUE
opened cursors cumulative            10,095
opened cursors current                    2
SQL> So the cursor leakage you are seeing is caused by something else... so what else is part of the code, or the session, that you have not yet mentioned?

Error while working with ref cursor

Hi I tried the following but getting the err
DECLARE
TYPE ref_nm IS REF CURSOR;
vref REF_NM;
vemp emp%rowtype;
BEGIN
OPEN vref FOR SELECT ename ,sal FROM EMP;
LOOP
FETCH vref INTO vemp;
EXIT WHEN vref%NOTFOUND;
DBMS_OUTPUT.PUT_LINE ( vemp.ename ||','||vemp.sal );
END LOOP;
CLOSE vref;
END;Error is
ORA-06504: PL/SQL: Return types of Result Set variables or query do not match

Syntactically correct - but a horrible approach performance wise if you only need specific columns.
The basic problem here is using the wrong tool. A ref cursor. Why? There's no reason in this code for using a ref cursor. Using a standard cursor data type addresses the requirement a lot better.
As you can define the cursor:
cursor myCursor is select c1, c2 from tab1;
You can define an array data type for fetching that cursors data - and thus definition does not need to be touched when you change the cursor itself to include/exclude columns:
type TMyCursorBuffer is table of myCursor%RowType;
And finally you can define a bulk collection buffer for bulk processing the output of the cursor:
myBuffer TMyCursorBuffer;

In java/jsp got Error,ORA-01000: maximum open cursors exceeded,

Dear ALL,
We are facing a problem of in java/jsp. ORA-01000: maximum open cursors exceeded,We are using referance Cursor for returing the Record in java file.
The Code is given below.
import java.sql.*;
import javax.sql.*;
import com.india.trade.dbConnection.*;
import oracle.jdbc.driver.*;
import java.util.Vector ;
public class IntRmsActivity
     private static JDBCConnection instance = null;
private static Connection con = null;
     private static CallableStatement stmt_admin_getadmins = null;
     private static String str_admin_getadmins = "{ call Admin_conf.RMS_ADMIN_GETALLADMINS(?,?) }";
     static
          try
               instance = new JDBCConnection();
               con = instance.getConnection();
               stmt_admin_getadmins = con.prepareCall(str_admin_getadmins);
}catch(Exception se){se.printStackTrace();}
     public static Vector admin_getAdmins() throws Exception
          checkconnection();
          String message = null;
          Vector v_admins = new Vector();
          ResultSet rs_admins = null;
          stmt_admin_getadmins.registerOutParameter(1 , OracleTypes.CURSOR);
          stmt_admin_getadmins.registerOutParameter(2 , Types.VARCHAR);
          stmt_admin_getadmins.execute();
          message = stmt_admin_getadmins.getString(2);
          System.out.println("message " + message);
          rs_admins = ((OracleCallableStatement)stmt_admin_getadmins).getCursor(1);
          while (rs_admins.next())
                    v_admins.addElement(rs_admins.getString("adminid"));
          rs_admins.close();
          return v_admins;
CREATE OR REPLACE PACKAGE Admin_conf IS
TYPE REF_CRSR IS REF CURSOR; /* OUTPUT CURSOR VARIABLE TYPE */
PROCEDURE RMS_ADMIN_GETALLADMINS(RESULTS OUT REF_CRSR,
                                        OUT_MESSAGE OUT VARCHAR2);
END Admin_conf;
CREATE OR REPLACE PACKAGE BODY Admin_conf
IS
PROCEDURE RMS_ADMIN_GETALLADMINS(RESULTS OUT REF_CRSR,
                                        OUT_MESSAGE OUT VARCHAR2)
IS
l_ref_out_crsr REF_CRSR;
BEGIN
     OPEN l_ref_out_crsr FOR
     SELECT EXECUTIVE_ID adminid
     FROM MASTER_EXECUTIVE_ID
     ORDER BY EXECUTIVE_ID;
     OUT_MESSAGE := 'ADMIN IDS FETCHED SUCCESSFULLY';
     RESULTS := l_ref_out_crsr;
EXCEPTION WHEN OTHERS THEN
          OUT_MESSAGE := 'ERROR ' || SUBSTR(SQLERRM, 1, 60);
END RMS_ADMIN_GETALLADMINS;
END Admin_conf;
Regards
Ajay Singh Rathod

Are you actually closing the connections, resultsets in all cases?
From what you've posted you call
rs_admins.close();but in that method, you propagate any exceptions that occur out to the caller method, which in turn just prints a stack trace.
So if an exception occurs before you call the rs_admin.close() the result set will never be closed as the statement won't be reached.
I'd add a speific exception handling routine to the admin_getAdmins() method and include a finally clause to close the result set in all cases. You can still onthrow the exception if you want.
cheers
-steve-

Need help with google search..wont hold a cursor unless I hold down my mouse in English

search bar will not hold cursor,cannot type any more letters without using the mouse..what is causing this and how can I dtop it..very annoying

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Question regarding cursor variables, while using table functions

Hi,
I created a procedure and when i'm try'g to call it. now i'm getting this error.
CREATE OR REPLACE TYPE TAB_EMP_REC IS OBJECT(
EMP_ID NUMBER(9),
EMP_NAME VARCHAR2(30));
CREATE OR REPLACE TYPE T_EMP_TMP IS TABLE OF TAB_EMP_REC ;
CREATE OR REPLACE PROCEDURE USP_CREATE_DATA(
p_Input IN NUMBER,
V_EMP_CUR OUT sys_refcursor) IS
T_EMp T_EMP_TMP := T_EMP_TMP( );
BEGIN
t_emp.extend();
t_emp(1) := TAB_EMP_REC(p_input, 'jack');
OPEN V_EMP_CUR FOR SELECT * from TABLE(t_emp);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERROR '||SQLERRM);
END USP_CREATE_DATA;
calling procedure::
DECLARE
type O_RESULT_CUR is ref cursor return TAB_EMP_REC;
V_EMP_REC TAB_EMP_REC;
BEGIN
USP_CREATE_DATA(99, O_RESULT_CUR);
LOOP
FETCH O_RESULT_CUR INTO V_EMP_REC;
EXIT WHEN O_RESULT_CUR%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(V_EMP_REC.EMP_ID);
END LOOP;
CLOSE O_RESULT_CUR;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERROR '||SQLERRM);
END;
Now i'm getting an error PLS-00362: invalid cursor return type; 'TAB_EMP_REC' must be a record type.
My question is i already declared it as a database object. What do i need to do ?
thank you

but t_emp(1) := TAB_EMP_REC(p_input, 'jai');
is correct, since.. i'm passing a record into t_emp(1)(this is the first column in this table)No it is not, since TAB_EMP_REC is just an object, when used as a collection, it can be a VARRAY, a PL/SQL table(associative array), nested table etc. As mentioned in my earlier post, if you want to use a collection of the same structure (with subscript n, as you have done here), then you need to declare a collection of type TAB_EMP_REC.In this case you have already declared a table of type TAB_EMP_REC - +CREATE OR REPLACE TYPE T_EMP_TMP IS TABLE Also, t_emp is of type T_EMP_TMP - T_EMp T_EMP_TMP := T_EMP_TMP( );*
As for the error you are getting, try changing to -
t_emp := T_EMP_TMP(TAB_EMP_REC(p_input, 'jai'));*
Note : Not Tested.

Extractor for concurrent employment

The standard extractor 0HR_PY_1 does not meet the our requirements, as the extractor sums up the records extracted out of the cluster table into a monthly sum. We requires this to be captured by pay period. what I have to do to enhance the program to use the CE cluster tables.

Here is my new Extract function
FUNCTION ZHR_RSAX_BIW_GET_DATA.
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE HRMS_BIW_PY1 OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
Example: DataSource for table HR Pay
TABLES: HRMS_BIW_PY1.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
 S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
 S_CURSOR TYPE CURSOR.
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
 L_R_CONNID FOR SFLIGHT-CONNID.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
 buffer input parameters
 prepare data selection
Check DataSource validity
 CASE I_DSOURCE.
 WHEN 'ZHRPAY'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
 LOG_WRITE 'E' "message type
 'R3' "message class
 '009' "message number
 I_DSOURCE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
 APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
 S_S_IF-REQUNR = I_REQUNR.
 S_S_IF-DSOURCE = I_DSOURCE.
 S_S_IF-MAXSIZE = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
 APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
 Following Calls FETCH only
First data package -> OPEN CURSOR
 IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
 MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
 APPEND L_R_CARRID.
 ENDLOOP.
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
 MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
 APPEND L_R_CONNID.
 ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
 OPEN CURSOR WITH HOLD S_CURSOR FOR
 SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
 WHERE CARRID IN L_R_CARRID AND
 CONNID IN L_R_CONNID.
 ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
 FETCH NEXT CURSOR S_CURSOR
 APPENDING CORRESPONDING FIELDS
 OF TABLE E_T_DATA
 PACKAGE SIZE S_S_IF-MAXSIZE.
 IF SY-SUBRC <> 0.
 CLOSE CURSOR S_CURSOR.
 RAISE NO_MORE_DATA.
 ENDIF.
 S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
PERFORM Cal_HR_Pay.
ENDFUNCTION.
FORM : Cal_HR_Pay
Created : 04.04.2006 09:21:28
FORM Cal_HR_Pay .
DATA: sel_begda like sy-datum,
 sel_endda like sy-datum.
DATA: g_s_interface TYPE sbiwa_s_interface.
DATA: g_s_read_only TYPE SBIWA_FLAG.
DATA: persons_package like hrpernr occurs 0 with header line.
DATA: l_t_hrms_biw_py1 LIKE hrms_biw_py1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'Z_ZHRMS_BIW_EXTRACT_PY1'
 EXPORTING
 I_UPDMODE = g_s_interface-updmode
 BEGDA = sel_begda
 ENDDA = sel_endda
 I_READ_ONLY = ' '
 TABLES
 TABPERNR = persons_package
 PY1_INFO_SOURCE = l_t_hrms_biw_py1
EXCEPTIONS
 ERROR_PASSED_TO_MESS_HANDLER = 1
ENDFORM. "Cal_HR_Pay
Here is my Error when I was trying test data Source
Please let me know how I call function Z_ZHRMS_BIW_EXTRACT_PY1 into ZHR_RSAX_BIW_GET_DATA.
Data Source is created successfully but When I test It is throwing an error.

Find data where data not in ref cursor

CREATE OR REPLACE PACKAGE types AS
TYPE weak_ref_cursor IS REF CURSOR;
END types;
CREATE OR REPLACE PROCEDURE procedure_name
(p_getname OUT types.weak_ref_cursor,
p_tablename IN VARCHAR2, p_salary IN NUMBER)
AS
v_tem VARCHAR2 (4000);
BEGIN
v_tem := 'SELECT ENAME FROM ' || UPPER (p_tablename) || ' WHERE sal > :b_salary';
OPEN p_getname FOR v_tem USING p_salary;
END procedure_name;
SQL> EXECUTE procedure_name (:g_getname, 'EMP', 2000);
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> print g_getname;
ENAME
ALLEN
WARD
MARTIN
BLAKE
babu
JOHN
TURNER
7 rows selected.
Now i want to select data from emp table where ename not in ouput of g_getname
Please help me

You cannot select that data from using a query(since the program unit is procedure), instead you can write a code (anonymous pl/sql block) and retrive the records and print them using dbms_output.put_line on console.

CVP DBLookup cursor/concurrency type

Similar Messages

Maybe you are looking for