CX_RSR_X_MESSAGE with 80SD_O01 standard

Hi Everyone, I am running RSA3 transaction in BW system (7.02) to check 80SD_O01 extractor, this one will be used for moving data from 0SD_O01 to 0SD_O03. When I ran the extractor checker, the system dumps UNCAUGHT_EXCEPTION, CX_RSR_X_MESSAGE, SAPLRRMS. I followed the instructions at OSS note 1157796, I checked the 0REQUEST and 0REQUID with transaction RSD5, but nothing changes, could you help me?

Hi,
check following thread
Short dump u201CCX_RSR_X_MESSAGEu201D with cube 0PS_C031
Exception CX_RSR_X_MESSAGE  in manage screen of 0ic_c03 cube
URGENT: cx_rsr_x_message "uncaught_exception" in 0ic_c03
Thanks and regards
Kiran

Similar Messages

  • Can I combine a form created in Livecycle Designer with a standard pdf to create a new document?

    I have a fillable form that I created with Livecycle Designer along with two standard pdf files.  When I try to combine in Acrobat Pro 10 it identifies the form with XML data and will not allow me to complete the process.  Thanks in advance for any help with this.

    No you cannot... this is one of the things my organization struggles with.  I love livecycle becuase of its dynamic form capabilities, but we have so many other pre-built pdfs in adobe pro that can not be merged with these forms.  It is truly frustrating!!!  wish i had a better answer for you.  Also from the book 'Creating Dynamic Forms with Adobe LiveCycle Designer' page 6... "The PDF files that Designer creates are structurally different than other PDF files...... LiveCycle Designer can edit a PDF form created in Acrobat, but Acrobat can not edit a PDF form created in Designer."  Likewise... XML pdfs do not merge with other pdfs. JoBeth

  • How to find the Standard Program associated with a Standard IDOC

    Hi,
          I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the standard program .....

    Hi,
    For outbound IDoc the program can be found:
    1) For master IDoc via transaction BD60. Here for the message type you can find the function module used to generate the IDoc. Within this function module you can find the user exit where you can code your logic.
    2) For IDocs with message control (output control) we maintain settings for proces code in WE41. This process code will lead to outbound IDoc generation program.
    For Inbound IDoc the program can be found:
    Via WE42 where inbound process and its related inbound function module is maintained.
    In each cases above we can go the function module and find the customer exit where idoc enhancement logic can be coded.
    For extending IDoc look at the following links:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/content.htm">Extending IDoc - SAP help</a>
    It can be summarized as follows:
    Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
    - Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
    - Click on Create new and enter a description and press enter.
    - Click on ZIDOCTYPE01 and then on the Create icon.
    - Enter ZIDOCTYPE as the segment type, click on Segment Editor.
    - Enter a description for your segment type and create.
    - Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
    - Save and generate, press back
    - To release the segment choose Goto, Release from the menu.
    - Check the box on the line of your segment.
    - Save, back and enter.
    - Your Idoc type structure should be displayed with your new segment.
    - Save and back.
    - To release the Idoc type choose Extras, Release type from the menu and Yes.
    Hope this helps.
    Regards,
    Gajendra.

  • Attach GOS attachments with a standard send mail functionality

    Hi Folks,
    I am here after long time and need your help.
    I have a requirement where I need to attach document with a standard send mail functionality.
    Below is the details:
    From Quality notification 'Action Box', if the user select a perticular action (it is similar to web link), the system is sending a mail to an external mail id provided by the user (In a popup). This mail send is happening through a SAP standard functionality.
    Now the requirement is, I need to attach selected file from GOS (generic Object Services) and attach them to the mail. Sending mail should happen through standard functionality.
    I want to know below two points:
    1) How to get selected files from GOS attachment?
    2) How to attach them to mail? (only attach, sending will be done by standard functionality)
    Hope I am clear with the requirement.
    Please help me to get it resolved.
    thanks,
    Surajit

    1st - analyse fm SO_ATTACHMENT_LIST_READ and table SOOD
    and function groups sgos* and SOB2
    hope that helps
    Andreas

  • When inserting a .pdf of a document with a standard white paper color the test and images show up, but the white background is transparent. How do you also make the white paper color show up?

    When inserting a .pdf of a document into a Keynote template with a standard white paper color the text and images show up, but the white background is transparent. How do you also make the white paper color show up?

    Use the color fill option - select the inserted .pdf and assign a fill color of white to it using the Color Fill Menu on the Toolbar or the Color Picker Palette.
    Good Luck.

  • With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

    Hey Paul,
    Please let me know what version of Acrobat Standard are you using.
    Regards,
    Anubha

  • Problem with the standard   RMDATIND

    Good afternoon
    I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

    Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
    I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
    Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
    Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

  • I need create a lof of files with the same password with Acrobat Standard 9

    Good Morning:
    I need create a lot of pdf files with password. After I put all files in a directory and with the Acrobat Writer Version 4 selected this directory and the program Acrobat automaticly put the same password in all the files. After as well, I could select files with the same password and changed the password automaticly of this files.
    Now with the Acrobat Standard 9, I don't know make this taskes. My cuestion is "Can I make this things with acrobat Standard 9 or I need other version?"
    Thank you

    Thank you for your help
    Your solution is different from the other members' opinion. ¿Is This option  available in the Adobe Standard ? Because I have not found it in Adobe Standard.
    Your option is with   Edit > Preferences > Batch Processing Security Method "Password Security" and the option of the other members is with Advance > Batch Process.
    I have tried to change some pdf files that had password with Adobe Pro, so I tried to remove the security password from the pdf files, with Advance > Batch Process.
    I created a new secuence with security through  the Option "Whithout Password" but when I executed the secuence, the program showed me a window with this message "OPERATION NO AVAILABLE".
    ¿Can you help me? I don't kown how I can remove the password of this pdfs, yet.
    Thank you in advance.

  • Has anyone else had problem with the STANDARD package?

    Hi Oracle gurus, has anyone here had the same problem with the STANDARD package? Or do I have to reinstall Oracle to make it work?
    Thanks.
    Ben

    missesboggs wrote:
    I literally just called AT&T and Apple about this today.  I was having issues with iMessage and texting my husband.  His texts back to me would show up as my name.  Turns out it's because we share the same AppleID.  So, I'm currently trying to change mine, but it hasn't worked so far.  I'm on hold with Apple right now to see if I can get it fixed.
    Both of you have registered the same email address for iMessage. If you were using a shared Apple ID and you updated your phones to iOS5, the default will be the Apple ID. Go into settings and change it.

  • Including User selection criteria along with LDB standard selection screen

    Hi
    While creating a HR report, along with the standard selection screen, if the cusomer requires some more fields to be added, How to retrive the data from the DB?
    Is it the way to retrive the data based on Standard selection criteria from the LDB and then filter it based on user criteria or any other way?
    Please help me out in this regard.
    Thank you.

    Yes thats the way. You get the data based on Selection screen of LDB (You can select Report Catogory you wish to) once you get data, You can put CHECK statement to see the data against PXXXX type to the filter value from you custom field on selection screen.

  • Process will not be created with zero standard prices in material master

    Hi,
    I have two type of material;
    1.     In process material say A1
    2.     Finished Goods say B1
    Both materials price control are standard price.  I do not run costing. So , after creation of material master , standerd price has to update through MR21 in the account1 tab before start production .
    Suppose, if I forget to update standard price in material master and prepared process order, it will carry zero value of production cost.
    Hence, I want to restrict the creation of process order with zero standard prices in the material master.
    In order words, as long as standard price will not be updated after creation of the material master, user will not be allowed to create process order, if wrongly try, system will give message u201Cwith zero standard price creation of process order will not be allowedu201D.
    Please let me know either standard configuration or name of User exit or Badi.
    Regards,
    Amit

    Hi,
    You need to use BADI: workorder_update.
    Method: At release.
    check MBEW-STPRS field in the code ..and flag error and reject error if STPRS = 0.
    Regards,
    Santosh Sarda

  • Replace an existing enterprise software device with the standard one for 8700f ?

    I have a software device on my 8700f which was installed with a security option from my previous employer (Password in addition to the PIN code + Security time out). How to replace this installed software with a standard one from Blackberry?
    Solved!
    Go to Solution.

    Oh right. good catch JSanders.  
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Does reporting server come with zcm standard

    Is the reporting server licensed with zcm standard version or do I need to purchase something else?

    dmilam,
    >
    > Is the reporting server licensed with zcm standard version or do I
    > need to purchase something else?
    Yes, a licens is included when you get ZCM standard.
    Niels Poulsen
    Novell Knowledge Partner
    A TRUE RED DEVIL

  • 550 5.7.1 This message does not comply with required standards

    One of my users received this error message when using MS Word's mail merge function for email messages.
    <mydomain.com #5.7.1 smtp;550 5.7.1 mA7MhP7f029968 This message does not comply with required standards.>
    It bounced on all the recipients and when I tried to send the message directly through Outlook it gave the same error. He has sent to these recipients before and has used mail merge successfully before.
    Is it something with the content of the message?  If so, where do I change the settings to allow it to be sent?
    The recipients were on different domains.
    Thanks,
    Tomm

    Hi Tomm,
    Please let me know:
    1.      Whether the issue can always be reproduced?
    2.      If you configure Outlook 2003 to use Word to edit message, whether the issue still persists when sending email by using Outlook? (Tools->Options->Mail Format->Use Microsoft Office Word 2003 to edit e-mail address)
    Note: For Outlook 2007, it only uses Word as email editor.
    3.      If you are able to reproduce the issue by using Step 2, please let me know whether the issue can be reproduced if you send a Plain text email to the same recipient.
    In addition, would you please help me gather the related SMTP log for further research?
    Mike
     

  • Can I install Adobe Pro XI on a machine with Adobe Standard XI?

    Can I install Adobe Pro XI on a machine with Adobe Standard XI?@

    assuming you mean acrobat pro and standard, that may work, but it may not.
    more importantly, why would you leave acrobat standard on a computer that has acrobat pro?
    you should uninstall standard, clean (if you're using a win computer - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then install pro

Maybe you are looking for