CX_SY_CONVERSION_OVERFLOW DUMP IN APD
Hi everybody,
By executing an APD I´m getting a DUMP with the following information
Err.exec. time CONVT_OVERFLOW
Excep. CX_SY_CONVERSION_OVERFLOW
Anál.errors
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "DT_ODS_F_00001_CU" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value 100, an overflow occurred.
The source query executes perfectly in all the environments (BEX analyzer, WAD). There is a field 0CFM_CC_CUR in the query in which is the cause of the DUMP. By deleting this charactic from the query the problem disappear.
It looks like, something regarding currency conversion is failling, but really, I can´t find where the problem is.
I appreciate a lot your help in solving this problem.
Best regards
Conversion overflow could be due to
1. Incorrect mapping of fields
2. Field value exceeding maximum possible value - for instance value of an Integer KF cannot be more than 65535 or -65535
If your source is a query - execute the query separatelky and check the values of the Key figures and then if any of the values exceed the integer value limits - change that KF to Float and then try.
Similar Messages
-
Short dump in APD (RSANWB)
Hi,
I get following error when trying to change/edit/execute an Analysis Process:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RSR_X_MESSAGE
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSAN_PR_DSGN_MAIN_TLOGO ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13".
I tried to re-activate some of my objects but that has not solved the issue.
I tried to look for OSS notes but could not find one matching the issue I experience.
Can anyone provide input on this issue?Hi,
SY-TITLE Data Source: Query
SY-MSGTY E
SY-MSGID RSDA
SY-MSGNO 101
SY-MSGV1 0TCT_C01
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 2
SY-DATUM 20100921
SY-UZEIT 141500
SY-XPROG SAPLSBAL_DB
SY-XFORM CONVERSION_EXIT
I tried re-activating 0TCT_C01 but it had not helped.
The note that you specified did not go directly on the error that I receive.
Do you have any other suggestions?
Edited by: Amit Luthra on Sep 22, 2010 10:44 AM -
APD returns ABAP Error: TSV_TNEW_PAGE_ALLOC_FAILED
Hi
I'm trying to run APD for a virtual cube.
The design of the APD is as follow:
1. Read a Query (FM of a virtual cube query)
2. Filter the value
3. Aggregate the value
4. Output to text file
If I run RSRT to read the query, I'm able to get the query, and it's returning 936,210 rows.
However, when I run it from APD, it threw me the following errors:
Error analysis
The internal table "\CLASS=CL_RSCRMBW_BAPI\METHOD=GET_AXIS_DATA_V2\DATA=LT_MPP"
could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 652
Number of rows: 5,027,712
Allocated rows: 5,027,712
Newly requested rows: 16 (in 1 blocks)
Any idea what I can do to rectify this?
Your advice is much appreciated.Hi,
This is a problem related to memory of internal table.
Please check the below links
APD dump TSV_TNEW_PAGE_ALLOC_FAILED
ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
APD Dump: TSV_TNEW_PAGE_ALLOC_FAILED (but processed in database)
Re: TSV_TNEW_PAGE_ALLOC_FAILED and TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Hope this helps
Thanks. -
Short dump while executing APD
Hi Experts,
We have a requirement to populate key and text values for 23 charecterstics in to a flat file. For this we have created a APD with query as source, This query will bring key values. And text values are populated using APD routine which will look up respective text tables and all the result data is downloaded in to a flat file.
When testing this APD i have come across a short dump, as all the charecterstics are placed in rows. Then i have applied static filters in the query for some of charecterstics and executed the APD. It worked. But if try to execute APD with no filters in the query it gives me short dump. Request you to suggest strategy which will avoid the short dump and improve the performance, where i can display all the 23 charecterstics key and text values.
Thanks in advance.Hi Javed
Here are couple of things what you can try
- You can apply filters in the APD and split the data into small chunks and later collate the data into one final file, this can be done by decisions in APD
- There is a difference how you have created your query and applied the filters/restrictions,In case of 7x queries none of the filters should be in Default tabs and all of them should be in Filters tab only
- From my previous experiences I have seen that at times you add a dummy "Filter" type be applied in APD to avoid such issues, so give this a try as well
Thanks
Abhishek Shanbhogue -
Dump: BCD_OVERFLOW showing exception as CX_SY_CONVERSION_OVERFLOW
Hi Experts,
I am getting the dump as BCD_OVERFLOW showing exception as CX_SY_CONVERSION_OVERFLOW. I have tried to go through the standard notes 1151693, 1147593, 754758 & few others. But I am not able to find the note specific to my software component details:
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
PI_BASIS 2005_1_700 0018 SAPKIPYJ7I
ST-PI 2005_1_700 0001 SAPKITLQI1
SAP_BW 700 0008 SAPKW70008
LCAPPS 2005_700 0001 SAPKIBHD01
SAP_AP 700 0005 SAPKNA7005
SAP_APPL 600 0005 SAPKH60005
SAP_HR 600 0002 SAPKE60002
EA-IPPE 400 0002 SAPKGPID02
EA-APPL 600 0002 SAPKGPAD02
EA-DFPS 600 0002 SAPKGPDD02
EA-FINSERV 600 0002 SAPKGPFD02
EA-GLTRADE 600 0002 SAPKGPGD02
EA-HR 600 0002 SAPKGPHD02
EA-PS 600 0002 SAPKGPPD02
EA-RETAIL 600 0002 SAPKGPRD02
FINBASIS 600 0002 SAPK-60002INFINBASIS
CPRXRPM 400 0002 SAPK-40002INCPRXRPM
ECC-DIMP 600 0002 SAPK-60002INECCDIMP
ERECRUIT 600 0002 SAPK-60002INERECRUIT
FI-CA 600 0005 SAPK-60005INFICA
FI-CAX 600 0005 SAPK-60005INFICAX
INSURANCE 600 0002 SAPK-60002ININSURANC
IS-CWM 600 0002 SAPK-60002INISCWM
IS-H 600 0002 SAPK-60002INISH
IS-M 600 0002 SAPK-60002INISM
IS-OIL 600 0002 SAPK-60002INISOIL
IS-PS-CA 600 0002 SAPK-60002INISPSCA
IS-UT 600 0002 SAPK-60002INISUT
LSOFE 600 0002 SAPK-60002INLSOFE
SEM-BW 600 0002 SAPKGS6002
SLL-LEG 7.00 0006 SAPK-70006INSAPSLL
WFMCORE 200 0002 SAPK-20002INWFMCORE
AIN 400 0000 -
The reason for the exception is:
In the current arithmetic operation with operands of type P an overflow
has been detected. Possible causes are:
1. The result field of type P is too small to store the result.
2. The result or an intermediate result has more than 31 decimal places.
Request you to please suggest me the solution to overcome this dump.
Thanks & Regards,
Naresh.Hi,
If the problem occurs from your cutom programs, ask developer to fix them.
If error from SAP standard program and if you did not made any changes to program, raise product error message with SAP.
If it was SAP standard program and you made any changes by yourself/customer, revert back the changes.
Regards. -
APD: dump GETWA_NOT_ASSIGNED
When I try to display the data of a query as a source in the Analysis Process Designer (APD) in RSANWB, the dump GETWA_NOT_ASSIGNED occurs in the method CL_RSCRMBW_BAPI=>GET_KYF_DETAILS_BAPI as an error. Could anybody help me? Please give me your thoughts about it.
Hi Tatsiana,
You should check if the note 1408037 would solve the problem.
Best Regards,
Vincent -
APD master data join - ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
I have created an APD to join 3 ISU master data infoobjects
1. left join 0UCPREMISE with 0UC_CONNOBJ
2. left join 0UCINSTALLA with result of 1.
3. Store the data in ODS
When I did this in DEV (D4S) everything worked - but there is also much
less data in the master data infoobjects.
When running the APD in Test (Q4S) I get ABAP dump after a while (not
time out): TSV_TNEW_PAGE_ALLOC_FAILED
1. I have tried with the APD setting to store in internal memory to OFF
but the same problems occur.
2. I tried to create index (on /BI0/P* ) for fields part of the join
which was not table key but same problem occurs.
3. I have no filters for the joins as I want to get all master data in
the output ODS.
4. The size of the p-tables are:
/BI0/PUCPREMISE = 1 385 792
/BI0/PUC_CONNOBJ = 1 031 272
/BI0/PUCINSTALLA = 2 445 742
5. Components + SP level:
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D
ST-PI 2005_1_700 0005 SAPKITLQI5
SAP_BW 700 0015 SAPKW70015
BI_CONT 703 0005 SAPKIBIIP5
Linux / Oracle 10.2.0.2.0
6. Info from ABAP Dump:
Error analysis
The internal table "\CLASS=CL_RSMD_RS_UTILITIES\METHOD=DATA_TO_RETURN\DATA=L_SX
RETURN-TVALUE" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 200
Number of rows: 15
Allocated rows: 15
Newly requested rows: 64 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server q4s_Q4S_72 on host q4s (wp 12)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1881
The error reported by the operating system is:
Error number..... " "
| Error text....... " "
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2755600
Extended memory (EM)........... 1977608256
Assigned memory (HEAP)......... 2000733904
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_RSMD_RS_UTILITIES==========CP" or "CL_RSMD_RS_UTILITIES==========CM006"
| "DATA_TO_RETURN"
Anybody have any idea what i can do to be able to run this APD (in production I want to run it on a monthly basis). To me it seems the APD fills 2 gig of mem, I thought the APD option to not store the complete dataset in internal memory (using temp tables instead) would kick in before the 2 gigs was used. Basis team didn't want to raise mem paramenters if it could be sorted out any other way.
Thanks,
JohanI have searched on my problem before posting here ofcourse - but somehow I missed this one, mentioned in 794257:
"InfoObject" data source
A dump occurs because of a memory overflow in the SAPLRSDM_F4 function group in the SD_CHA_GET_VALUES function module.
The InfoObject data source for reading master data is currently based on a function module that loads all data into the main memory in an inefficient data structure. As a result, the data source is only suitable for reading master data with a few data records. A memory overflow can occur for master data tables with lots of records such as business partners or products. This occurs regardless of how the "Process data in the memory" indicator was set.
If this situation occurs, set the InfoObject in such a way that it is available as an InfoProvider. Then use the "InfoProvider" data source instead of the "InfoObject" data source in the analysis process.
I'll try this...
//Johan -
Hi ,
When I try to check /execute an APD it is raising a short dump with the following message. It is happening with all the customer APD's in the system. Is there any configuration needs to setup to avoid the shortdumps.
Here are the details of error message.
"Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSAN_PR_DSGN_MAIN_TLOGO ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13". "
Regards,
RameshHello,
On short dump (check ST22 transaction), will probably see the following:
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 <INFOOBJECT>
SY-MSGV2 A
So please, follow the instructions below:
1. If the infoobject is active version exists. reactivate it again.
2. Please check note 1032937 APD: Partitioning with compound characteristic
This should help for your problem.
Thanks
Edward John -
Hi guys,
I have problems executing an APD ("TSV_TNEW_PAGE_ALLOC_FAILED"). In the Performance Settings, we have checked that we don't process the data in memory.
We have also check the Profile Parameters with the basis team, and it seems to be right.
Any idea???
Thanks in advance for your time and regards from Madrid.
Raul BañaresHello everybody,
Anyone can solved this problem?
Because it seems only a Basis parameters.
Thank you,
Danilo Bueno -
SAP BW 3.5 APD for master data
Gurus,
We are having issues with SAP BW 3.5 APD transformation before full upload for Item master data. Due to the high volume encountering short dumps. We cannot extend memory space to fix this short dump. What we are trying to do is initilize the values before the full load to make consistent with SAP so that BW item cost values is in sync with SAP. There was no issue in development and only in test system.
So work was moved to test.
Is there any suggestion for this problem or alternative to something else? Please help.
Thanks,
DiHi Abhishek,
We need to correct values of custom cost related fields of master data in BW that pull data from SAP. If any Item with cost field in SAP is not maintained any longer, we found the solution to initilize every record with APD before doing full upload in BW to be in sync. Version is BW 3.5. We are facing performance issue. So tried different ways like delete all the records that is already zero before reading data from the internal table. We still get short dump when process chains runs with APD program. I am not sure how to pull data in smaller chunks with filters here. Any suggestions please? Design is master data, filter columns, routines and master data. Source and target are the same.
Thanks,
Di -
ABAP DUMP WHEN Executing GANTT CHART IN CN41N TCODE
Hi,
we are getting the following error while trying to display gantt chart in CN41N Tcode.
A calculation field is defined too small.
The current ABAP program "FCNGR000" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "GET_WORKAREA" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A value generated during processing is too large for the
field "ALL_OBJ-VDAUER" of the program "FCNGR000".
any suggestion.please.
nazi.Should be rather obvious? The domain for VDAUER is Dec 10,1. The dump would suggest that you've getting a value for VDAUER that's more than 10 digits long?
-
"CONVT_OVERFLOW" "CX_SY_CONVERSION_OVERFLOW"
When i run the transaction SM35 everything is working property but in the ends that Error:
Error in the ABAP Application Program
The current ABAP program "SAPLGLT0" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "SPLIT_FROM_BASIS" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "-3.34076e+11", an overflow occurred.
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONVT_OVERFLOW" "CX_SY_CONVERSION_OVERFLOW"
"SAPLGLT0" or "LGLT0F61"
"SPLIT_FROM_BASIS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SPLIT_FROM_BASIS" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Any idea to resolve it???Hi,
Convert .TXT to .XLS and check the values if you find "-3.34076e+11" select right click --> format cells -->select number if you have decimal places, specify the decimals and click Ok. Save the file and convert to .txt.
If it doesn't work then check with ABAPer.
Regards,
Raj -
Dear All,
I am getting below error in PRD system. We are using ecc6, oracle 10g and windows 2003. The error coming after we have restarted the server. Please suggest how to solve the issues.
SM21 log
09:30:21 DIA 000 000 DDIC AB 0 Run-time error "BCD_FIELD_OVERFLOW" occurred
09:30:21 DIA 000 000 DDIC AB 1 > Short dump "100913 093034 nodeA " generated
ST22
Runtime Errors BCD_FIELD_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 13.09.2010 00:30:19
Short text
A calculation field is defined too small.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SWNC_RECORD================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "DO_TRANSFORMATIONS" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A value generated during processing is too large for the
field "ME->MAIN_RECORD_STR+1020(7)" of the program
"CL_SWNC_RECORD================CP".
Regards,
KumarDear Friends,
We even got same dump "BCD_FIELD_OVERFLOW" just after system restart. But error was slightly different. Please find below error details and solution:
Error Details:
The current ABAP program "CL_SWNC_RECORD================CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error Analysis:
An exception occurred that is explained in detail below. This exception cannot be caught in the context of the current statement.
The reason for the exception is: A value generated during processing is too large for the field " " of the program "CL_SWNC_RECORD================CP".
"BCD_FIELD_OVERFLOW" " "
"CL_SWNC_RECORD================CP" or "CL_SWNC_RECORD================CM002"
"CALCULATE_PROCESSING_TIME"
SOLUTION:
An OSS Note:
Note 1103295 - BCD_FIELD_OVERFLOW in CALCULATE_PROCESSING_TIME (It solves the problem) -
Run time error occuring due to the exception "CX_SY_CONVERSION_OVERFLOW",
hi,
Programme which is present in process chain,is getting the error the exception "CX_SY_CONVERSION_OVERFLOW",like this.
Can any body please help me out on this.
Thanks & Regards,
Aswini.Hi,
Check the shot dump (ST22) and post the logic block where exactly you are getting error.
regards,
raju -
Hi all,
There is an abap dump getting when few of the users trying to post MIGO.
This is happening only for few(2) users.
I have analysed the dump, getting dump because:
Runtime errors : CONVT_OVERFLOW
Exception : CX_SY_CONVERSION_OVERFLOW
overflow due to converting from 48820.
This error is happend in Zprogram(print program).
But I dint understand,,what would be cause of error.( I tried posting MIGo, it was ok)
Anyone have idea on this?
Regards,
PriyaHi,,
Thanks for your information.
I have analysed it.
The problem is at,
* get drumweight
SELECT SINGLE umrez
FROM marm
INTO lv_umrez
WHERE matnr = fd_matnr AND
meinh = 'DR'.
IF sy-subrc EQ 0.
* drumweight found
lv_num_label_f = lv_bstmg_kg / ( lv_umrez * lv_ntgew ).
fd_num_labels = CEIL( lv_num_label_f ).
The dump is happening at
fd_num_labels = CEIL( lv_num_label_f ).
As per my analysis fd_num_labels in the structure is defined as INT2 and in the FORM in changing parameters it is declared as ANY.
Can any one tell me is this because of the difference in data type?
Maybe you are looking for
-
The back and forward buttons, the refresh and stop loading buttons are not available for me to click. I can see them, but they are completely gray and I can't click on them. Also, firefox doesn't have a web address in the box anymore. It is always bl
-
I downloaded the new itunes 11 and not it will not work on my computer.
-
Jetphoto Flash Gallery Problems
Hi folks, I'm having some problems getting flash galleries created with Jetphoto Studio Pro to work on my website. For those of you unfamiliar with it, Jetphoto allows you to create standalone Flash galleries, consisting of an idex.html, imagelist.xm
-
Mod_edir got a new home
Hi all, it appears that Novell has no longer the money to keep their servers up, and we are forced to move all Novell Forge projects to other hosters ... one result is that we have just moved the mod_edir project to SourceForge: http://sourceforge.ne
-
All Apple MacBook Air Customers Please read.
Hi I have a few questions about the New MacBook Air. These qusetions are to help me get to know a little more about this new Apple Product. 1. How long does it take to start up. 2. Does the blue screen come up and sit for a while like 10 to 15 sec. 3