CYP2EUR fix rate exceed 5 decimal place/RATIO change?

Exchange rate for EUR:CYP (fix rate) is 0,585274 which exceed the SAP allowance 5 decimal place.
Can you advice what should be done in the system to enter the exchange rate above? Should we change to ratio (TCURF) from 1:1 to 10:1 or 100:1? Is there any impact if the ratio is changed?
Note: We are using SAP4.0B.

Hi
This can be done through T.Code - OY04.
Caution:- This configuration step has Cross- Client effects. So be careful.
Cheers
V.Krishnan
(Assign Points if Useful)

Similar Messages

What is the fix for constarined crop aspect ratio changing when the image is rotated

I've migrated through LR 3, 4 and now 5 up to 5.4. I have been able to set a crop aspect ratio and synch pictures to that ratio as well as other editing selections. When I edit a particular picture and rotate it , the aspect ratio has stayed constant - to the value originally selected.I've never had a problem and it has consistantly worked properly even through last weeks editing activities. Now, when I set aspect ratio and then rotate, the aspect ratio really changes. If I go back and reset aspect ratio and select Done, it seems to be ok. This issue seems to perform wrong with portrait orientation but not in the landscape orientation. I have uninstalled LR, gone through registry cleanup, reinstalled LR, claened up the registry but nothing gets better. I do note that the settings aren't totally removed as the reinstalled software wants to pick up where I left it prior to uninstalling. As best as I can tell, all of my settings and preferences are the same as last week. It works on last weeks folders but not on new ones.
I have now seen many forum write-ups about this problem but have never found any solution. Help - I can't go through life cropping and straightening images sideways.

Here is a thread that I think addresses this problem. There were MULTIPLE bugs in the crop tool when Lr5.0 came out, probably due to adding the Upright Tool, but they are slowly getting worked out. Maybe this one will be fixed in Lr 5.5
http://forums.adobe.com/message/6218903#6218903

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

Decimal places in udt

I have created a user defined table (udt).But it does not accepts float value.For entering float values I change the data type of the alphanumeric.How do I accept number with decimal places without changing it to alphanumeric ?

HI Dilip,
Set the Type and SubType propertied correctly.
When you create an UDF, please check, that
oUDF.Type = BoFieldTypes.db_Float
oUDF.SubType = BoFldSubTypes.st_Quantity
Regards,
J,

How to set the number of decimal places.

Just wondering what and where the code would be to set the number of decimal places when calculating an answer.

Depending on exactly what result you want you could alternatively format the result to a set number of decimal places.
This is not so good for financial applications where they want the total of 10 transactions to match the total of each number displayed but can be kind of important for scientific ones.
eg
someNumber.ToString("N3"));
Gives you three decimal places without changing the someNumber.
If this turned out to be wpf then you have stringformat you can use on a binding.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

OSA - Weightage Column Percentage decimal place

Hello
I have set up FWGT column for weightage in the Appraisal Template as percentage and it is giving 1.000 as default value, can the decimal place be changed to 1.0?
Could you please help me with the following issue?
Regards
Vibha

Hi,
as mentioned, it was a guess ;o)
I fiddled around a bit but if you create a new quantity scale with interval 0,1 (instead of 0,001 which is assigned to the standaard 100 point scale), you'll see only one decimal.
Or at least it does so in the SAP backend.
Wilfred.

Changing decimal places for currencies

Hi everyone,
I'm a complete begginer to SAP BI and I need to change a value in SPRO > General Settings > Currencies > Set Decimal Places for Currencies, but the option that I want doesn't exist.
I need to add a new entry with the value: currency - EUR6 and decimals 6, but there is no 6 available. Can anyone tell me where can I add this or what is the table where this information is???
Thanks in advance!
Rogério Brá

ok I think it works - just try and play
This is what I did (sort of same scenario - if you get my drift)
Currency Key MGF - translation ratio 1000:1
Exchange rate is : 11:02750 to the Euro
Invoice entered for 1,000,000.00
Currency calculated as 90.68 eur
(ie 1,000,000/(11.02750 * 1000))
You can play aroudn with direct/indirect to ge the factors right
But it works (I thought it did - I am qualified FICO honest!!)
This wont get you around displaying 6 decimals - BUT it will help with currency conversion

Changing the Decimal places in the currency

Hi all
we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
is there any programmes / reports that would fix such inconsistencies?
any OSS notes?
thanks and regards
gkk

HI,
You should NOT change the decimal places in a productive system.
If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
Please check the note 137626 describes this.
If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
Please assign points if it useful.
Regards
Ravinagh Boni

Changing Decimal Places in CUNI

hello,
my company's requirement as of the moment is to increase the decimal places being displayed during service request for Activity Unit (AU). current setup is 3 decimal places. we need it to at least 10 to ensure almost exact computation.
i tried changing the decimal places in TC CUNI, but it wouldn't let me proceed. Per error message the ISO code for AU is similar with PC, which is PCE. Upon checking in DEV, PC has no ISO code, but it has in PRD (PCE).
1. how do i go about the ISO code error?
2. what is the impact of changing the decimal places now that the system is live for 8 months now? will it affect existing POs?
3. if it is no longer advisable to change the setup, how will we dispose the difference between the billed amount of contractor against the amount generated during GR/IR and MIR7?
thanks in advance, gurus.

thank you for your inputs, Jeevan. we've tried up to 100,000 since any more will make the PO exceed the original contract amount.
the contract involved will be delivered in a span of many months, and billing and payments will depend on percentage of completion.
i hope someone can enlighten me as to how other companies do it, best practice or not. i'm pretty sure those in construction or property development will find this case familiar. or maybe point me to an article or anything.
thank you for taking the time.

Changing decimal places in measuring tool

Hi everyone,
I often use the measuring tool to measure old scanned drawings, it is very useful but it supplies two decimal places for mm dimensions, this is really too much. I am not able to find any place where this setting can be changed.
Thanks a lot in advance
Claudio

thank you for your inputs, Jeevan. we've tried up to 100,000 since any more will make the PO exceed the original contract amount.
the contract involved will be delivered in a span of many months, and billing and payments will depend on percentage of completion.
i hope someone can enlighten me as to how other companies do it, best practice or not. i'm pretty sure those in construction or property development will find this case familiar. or maybe point me to an article or anything.
thank you for taking the time.

Can not change the number of decimal places in the normalization of result

dear all
    i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
    maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
    can somebody helps me ? your advice is appreciated.

hi,thanks for your advice, but that doesn't suit for my problem.
before i set the normalization of result, i can change the decimal values. After that i cann't.
In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
i think the point maybe lie in the normalization of result. please advise... thanks...

Problem while changing decimal places in SAP B1 2007

Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advance

Paul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy

Decimal places for JPY currency in change documents

Hi Gurus,
For opportunities in SAP GUI the change documents for JPY show incorrect numbers.
The number is divided by 100 (two decimal places added).
Checked the CDPOS table and found the values already divided (two decimal places added).
SPRO->General Settings->Currencies->Set decimal places for currencies is set for 0 decimals for JPY.
Is there any way I can get correct values in the change documents?
Please advice. Any hint is useful.
Thx,
Martin Kuma

Hi Naren,
Thank you for the tip, however the TCURX table is changed via customizing and should be changed only during the system initialization.
What I would like to do, is to assure that the system displays the values in change documents correctly. It should apply the currency conversion for the data displayed the same way it does for all the tables.
Do you have any idea, how should I do this?
Regards,
Martin Kuma

How to change the decimal places in the value axis of a chart in WAD?

Hello,
The key figure in my chart has 2 decimal places and I want the value axis to show the same. How to do that?
Thanks in advance, Nathalie

Hi,
change the Format property of the ValueAxis-Line to 0.00
Then the axis displays its values including two digits after the decimal.
Regards, Kai

Changing Decimal places in table TCURX

Hi There
We have a business requirement to change the decimal places in table TCURX from 3 Decimals to 5 Decimal places. No previous postings have been made in foreign currencies.
If no transaction data has been posted in foreign currencies yet, will this have an impact?
What will the impact be?
Regards

Hi,
Refer to this SAP text:
In the R/3 System tables currency fields are stored as decimal figures with a variable number of decimal places. The decimal point is not stored in the field in the database. Instead, each currency field refers to a currency key field. In this transaction you assign the number of decimal places to this currency key uniquely. Example: If you have set currency USD to have two decimal places and you post an amount of 100 USD, an amount of 10000 USD is stored in the currency field in the database. Not until this
amount is processed further or is output does the system use the currency key from the reference field to determine the number of decimal places via this table. In this way the table content can be interpreted correctly for further processing or formatted for output with the correct punctuation. If after posting you changed the number of decimal places for USD, for example, to 3, the existing field content of 10000 would be interpreted for futher processing or output as 10 USD (10.000). This would mean that the contents of tables across the system would, for all currency fields containing an amount in USD,
be interpreted incorrectly by 10 per cent. To change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime
aspect be carried out in a productive system. The following changes to the TCURX table can
thus lead to the loss of data integrity if you make the changes in a productive system or transport them into a productive system:
o Change to the number of decimal places of an existing currency
o Deletion of an entry from the TCURX table (corresponds to changing the decimal places to the standard value of two decimal places)
o Insertion of an entry in the TCURX (corresponds to changing the standard value of
2 decimal places to a different value), if this is a currency code that already exists
Uncritical changes are any made to this table during the Customizing of a new installation or the insertion of TCURX even during operations, if the currency codes have just been entered in the TCURC table using transaction OY03, signifying that no postings to these currency codes can have been carried out yet.
Regards,
Eli

CYP2EUR fix rate exceed 5 decimal place/RATIO change?

Similar Messages

Maybe you are looking for