OSA - Weightage Column Percentage decimal place

Hello
I have set up FWGT column for weightage in the Appraisal Template as percentage and it is giving 1.000 as default value, can the decimal place be changed to 1.0?
Could you please help me with the following issue?
Regards
Vibha

Hi,
as mentioned, it was a guess ;o)
I fiddled around a bit but if you create a new quantity scale with interval 0,1 (instead of 0,001 which is assigned to the standaard 100 point scale), you'll see only one decimal.
Or at least it does so in the SAP backend.
Wilfred.

Similar Messages

OBIEE - edit report entities like title, column name, decimal places

Hi all,
How do I edit OBIEE report entities like title, column name, decimal places?
I know I can edit column name in repository, but I hope I can do it also at report level.
As you can see, year looks like "2012.00", I don't need these zeros after "2012", how do I edit it?

Using Criteria tab
Column Properties->Data Format->Override Default Data Format
You may go for Save button to make it catalog level for that column
Edited by: Srini VEERAVALLI on Dec 7, 2012 10:57 AM

U261B An Issue due to 3 Decimal Places in Percentage - Help Required

I've an Issue in BEX report output, which is like when I try to create a 'Percentage' computation on a Key Figure Value, I'm getting 3 decimal places as 'default' output.
The 'Calculations' settings I made for this KF is
> Calculate Result as ... Nothing Defined
> Calculate Single Values as .... Normalize According to Next Group Level Result
> [✔] Apply to results
> Calculation Direction - Along Rows
☹ I ran SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X' - Not woking! Should I choose Update/Insert/Delete??
☹ T006-ANDEC & T006-DECAN for '%' has 0 decimal places only. Am I checking the correct stuff?
☹ OSS note 866505 not helpful for my issue. BW 7.0 Stack
I'm getting my output as expected, but the only worrying factor is 3 decimal places due to the 'Calculations'. I'm unable to resolve using existing methods. Should I raise an OSS Note for this?
Please help...

Hi, I posted a message to SAP on this topic and got an explanation - it is a behaviour that cannot be changed in certain cases:
it is the known design that it is always displayed with three decimal
places for normalized values and the setting in Query Designer for
decimal place doesn't take effect. This is because that normalization
changes the number dimension of this structure element.
You may refer to below notes about more details.
> 869135 Decimal places and scaling for "Calculate Single Values As"
You cannot set the number of decimal places or the scaling for some
columns or structural components.
For 2: Some "Calculate As" functions change the number dimension of a
KID. In this case, the scaling and the number of decimal places set for
the KID are no longer relevant. In this case, the system ignores the
original setting and selects a setting that corresponds to the new
number dimension. This cannot be overwritten. The following functions
are affected:
Calculate Single Values as Scale to Result, Overall Result or Query
Result: Scaling 1 and three decimal places.
> 501930 Number of decimal places setting is not applied
As a result, normalized values resulting from the list calculation are
displayed with three decimal places and without scaling by default.
best regards, thom

How to get the number of decimal places configured for a site column

Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijit

Get the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

Trunc percentage two decimal places

I have a report that has the option of dispalying pdf or excel. I have the pdf version working fine but i am having a little trouble on the excel version. I have a grand total and department total. Basically I need help formating two decimal places. Both dept_total and grand_total are numbers that both display. I have another column that displays what percent of the total is from each dept.It currently returns a number such as 10.23383547957459973 which i need to display as 10.23 How can i incorporate the trunc function into this code?
...to_char((dept_total/grand_total) *100)
The query looks similar to this.
select
to_char(a._grand_total)
,to_char(a.dept_total)
,to_char((dept_total/grand_total) *100)
from(
select sum(xxxx) grand_total,
sum(xxxx) dept_total
from table)a

Hi,
Since you're calling TO_CHAR anyway, you can add a 2nd argument, specifying two decimal places:
select
 a._grand_total
, a.dept_total
, to_char ((dept_total/grand_total) *100, '999999999.99') AS pct
from (
 select sum (xxxx) grand_total,
 sum (xxxx) dept_total -- Why have two copies of the same value?
 from table
 )a If you're not using a 2nd argument, why use TO_CHAR at all in this query?
This will round the value, not truncate it. That is, if the value is 10.23583547957459973, it would display '10.24', not '10.23'. If you always want to round toward 0 (rather than to the nearest multiple of .01), then use TRUNC.

Changing the Decimal places for Percentage in cost distribution in SC

Hi Gurus,
Is it possible to change the number decimal places for the Percentage field in cost Assignment tab in Shopping cart in cost distribution option?
The user wants 3 decimal places, currently we can enter only 2 decimal places.
I have gone thro' couple of blogs which are talking about changing the price decimal and not the percentage field decimal. (in IMG setting: General settings > Currencies > Set Decimal places)
So, if anyone come acorss this issue, please let me know.
Thanks and Regards,
Nowsath

Decimal Places Factor of the Receiver Weighting Factors
Specifies the number of valid decimal places with which the given weighting factors are valuated.
Example
You enter 123456 as the weighting factor. Depending on the factor, this number is interpreted as:
Factor Decimal places Weighting factor
1 0 123456
10 1 12345.6
100 2 1234.56
1000 3 123.456
10000 4 12.3456
100000 5 1.23456
1000000 6 0.123456
Please check with your FICO consulant .what settings you have in backend system.
http://help.sap.com/saphelp_nw04/helpdata/en/bb/bdbdc4575911d189240000e8323d3a/frameset.htm
Muthu

Quantity column display upto 2 decimal places in ALV

I've created an ALV for dynamic columns. For this i've first created the fieldcatalog and then the internal table.
The problem that i'm facing in this is that the user wants the quantity column to be displayed upto 2 decimals. For this i tried the following:
1.)     wa_fldcat-decimals_o = '2'
         wa_fldcat-decimals    = '3'.
         wa_fldcat-datatype     = 'QUAN'.
with this i tried that let the calculation be to 3 decimal places but on output it should show 2 decimal places.
But this doesnot gets reflected on ALV. It still shows 3 decimal places.
eg: 3 decimal places: 16.667 + 16.667 + 66.667 = 100.001
2.)     wa_fldcat-decimals_o = '2'
         wa_fldcat-decimals    = '2'.
         wa_fldcat-datatype     = 'CURR'.
I also tried doing the calculation with 2 decimal places with datatype CURR but with this the last digit gets rounded.
eg: 2 decimal places: 16.67 + 16.67   + 66.67   = 100.01
Now we are taking total as 100 %. So tha calculative total cannot be more than 100.
On seeing 100.001 user says show it to me to 2 decimal places i.e. 100.00
On seeing 100.01 user says how can the total be more than 100 & this is .01 more than 100.
Therefore how can the 1.) option be achieved.
PLZ HELP!

Hi,
Can u check this one
DATA: gv_packed TYPE p DECIMALS 2.
CATCH SYSTEM-EXCEPTIONS conversion_errors = 6.
MOVE char_field TO gv_packed.
ENDCATCH.
IF sy-subrc = 6.
error handling
ENDIF
Try to move ur char field to a type p field. If char field is other than numeric then u will get error that can be handled in try...chatch..endtry block.
data: l_val type p decimals 2.
parameter my_val type char20.
try .
l_val = my_val.
catch cx_root.
Do ur error handling here
endtry.
you can work with search and concatenate.
value1 = 3601152
search value1 for '.' .
if sy-subrc eq 0.
concatenate value1(5) '.' value1(2)+5 into text.
Or value1 = value1 / 100.
endif.
Thanks.
Ashok.

Suppress decimal places in OBIEE Year column prompts

Hi gurus,
I don't know its a bug or what , in our database the "Year" columns comes without any decimal places ,also in the criteria section of the report ,I have made the data format "with '0' decimal places ", but still in the column prompt in the dashboard , I am getting year value with decimal places .
Eg. 2012 coming as 2012.00 in choice list of the prompts . Can you provide me any work around? for that thanks in advance..

The problem is due the data type of the column . Go to the physical layer and check the data type . It would be of 'Double' data type .. Change it to 'Int' data type. This would solve the problem . Posting it for the benefit of others who face similar issues. let me know if it helps anyone..
-Jay

Update decimal places in sales and use tax percentage rate [FTXP]

i need to update the decimal places in the tax percentage rate. i've gone through all of the tax configuration in the img several times and it is not there. have searched the internet for an answer to this, and am not finding it. need to update from four digits to the right of the decimal to five digits to the right of the decimal point.
for example, adjusting a tax rate field of 5.1234 to 5.12345, where the field will allow 5 digits.

Hi,
SAP has hardcoded in the program MF82TI00 to pick only the three places after decimal. Rest will be ignored.
In case this is your legal requirement, I will suggest to rather create an OSS message with SAP.
Regards,
Gaurav

Rounding to 2 decimal places in Derived column transform editor

I want to replace the contents of a value column with itself but rounded to 2 decimal places.
The current column is a double and I have tried to perform this using the following expression but it fails to work.
Code Snippet
Round(cc_vl,2)
How should I achieve this?

I’ll take a guess here but you started with this –
123.45678
Got this –
123.45000
Wanted this –
123.45
So the 123.45000 is absolutely correct, the value has been rounded to 2 digits. A double however has a scale greater than 2, and you only wanted two digits after the point because you were concerned about how the value looked rather than the actual value. This is certainly not a bug. It is how you format the data for display.
Your solution is the way to do this, either on the Derived Column or Data Conversion Transformation. You got it in the end, the replace versus new, because you cannot change the type of a column. You may convert the value, but the storage type of the column means it will implicitly revert to the base column type when you put it back, albeit with a value that has been rounded.
Does that explain it?

Percentages Incorrect - Not accurate to decimal place

Hi Experts,
I have a report that will generate sales quantities split by company and the associated % of total sales.
The sales % displays to 2 decimal places but the % is the integer before rounding. i.e. if the % should be 6.99723% it would display 6.00%
How do I get it to round correctly to display correct % splits?
The QTY for each company is calculated via a filter on the total sales qty by company name and the % worked out by dividing the filtered column by the total column.
Please help!
Edited by: user11240727 on 10-Jun-2009 08:51

Hi
in rpd only, apply cast( measure as real).
here measure is your functionality to calculate % value.
If you are not getting then apply cast( column as real) for each column that you are using to build the % formula..
Also try this,
and again apply round( whole functionality , 6) and now in answers data format of column properties, select decimal places to 5
And what is the query BI Server is generating for this column, seee.. so that you can easily debug.

Print Scale Percentage - Can the percentage go more than 2 decimal places??

Hello All,
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
Any thoughts?
Thanks
Geoff

Not that I know of. If you need it to be more exact, resize the artboard and scale the content. It's an arguable point, anyway, given how your printer will translate/ rasterize the stuff. Even if there were more digits, the result after the halfftoning might not at all be any different...
Mylenium

Decimal Place for Percentage

Hi,
Where do we change the number of decimal places for percentage? Currently it is set as 3places. (e.g. 1.234% change to 1.2345%)
Thanks,

Hi Shiva,
As for the link you gave, we don't want to change the currency decimal place. We only want to change the number of decimals shown in a percentage value. (such 1.2345% instead of 1.234%)
Thanks,

Displaying 2 decimal places in BI Answers column, using SQL_TSI_HOUR

Hi,
Would anyone know why the following code refuses to display 2 decimal places in a BI answers report:
' case when "- Job Detail"."Date Delivered" is null or "- Job Detail"."Date Received" is null then 'Not Available' else cast (ROUND(cast(timestampDiff(SQL_TSI_HOUR, "- Job Detail"."Date Received","- Job Detail"."Date Delivered") as double),2) as char) end '.
Thanks,
- Jenny

instead of * 1440
do with
* 1440.00
btw: why you need to cast to date? why cant be timestamp?
Discard it

Decimal places in report painter

Hi experts. I have a financial report written in report painter. I want to show two decimal places on a single row. The rest of the report is in whole dollars, but this one row is a percentage, so I want to show decimal places. I know that you can format an entire column, but I can't figure out how to format a single row. Can anyone help?
Thanks
Janet

YES U CAN
SAME AS ABOVE PROCEDURE
BUT SELECT ROW INSTEAD OF COLUMN
Edited by: Anil Kumar Potnuru on Feb 10, 2009 9:02 PM

OSA - Weightage Column Percentage decimal place

Similar Messages

Maybe you are looking for