Czech characters not visible in TOAD

Hello, I cannot see these special czech characters when use TOAD but yes when use SQL Developer.
In database settings are==>SELECT * from NLS_database_PARAMETERS:
*NLS_NCHAR_CHARACTERSET==>AL16UTF16
*NLS_LANGUAGE==>GERMAN
*NLS_CHARACTERSET==>WE8MSWIN1252
In my computer, Registry entries for Oracle0 is GERMAN_GERMANY.EE8MSWIN1250
What's wrong? Why cannot I see these characters in TOAD? I tried to use Arial, Arial Unicode but it never shows the real characters.
Thanks!

839041 wrote:
Hello, I cannot see these special czech characters when use TOAD but yes when use SQL Developer.Please explain what you mean by "cannot see..".
What is the definition of the relevant char column? (desc tablename)
*NLS_CHARACTERSET==>WE8MSWIN1252Note that the character (win 1252) set does not define characters such as c, d, e, n, r, t with hacek/caron diacritical mark (e.g. ř, Ť). The lack in character repertoire may be a problem depending on how Toad retrieves nchar columns (if applicable). So this may be a (non-oracle) app specific issue!

Similar Messages

Characters not visible in Generated pdf format..

Hi ,
I am working on a report.I have created an rdf file and registered in Apps to generate the report output in pdf format.When i am running my concurrent request its generating the pdf file but its not generating any characters only numerical values are visible in the output pdf file.I am coming across a problem every time making some small changes..Please help me.
Thanks and Regards
Nisheeth

839041 wrote:
Hello, I cannot see these special czech characters when use TOAD but yes when use SQL Developer.Please explain what you mean by "cannot see..".
What is the definition of the relevant char column? (desc tablename)
*NLS_CHARACTERSET==>WE8MSWIN1252Note that the character (win 1252) set does not define characters such as c, d, e, n, r, t with hacek/caron diacritical mark (e.g. ř, Ť). The lack in character repertoire may be a problem depending on how Toad retrieves nchar columns (if applicable). So this may be a (non-oracle) app specific issue!

Polish and Czech characters not displaying

Hi Experts,
I have to display the characters in Polish and Czech in adobe reader XI. Currently the text displays in unreadable format. Can anyone please help how this can be rectified?
Thanks
Tridib

Hi Tridib_Das,
You have to download the Reader font pack to get this working. Try to download the pack from this location, see if that works: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4885
~Deepak

Snapshots not visible in TOAD

Hello,
We upgraded our database to 10g 10.2.0 from 9.0. After upgradatiion we cannot see snapshots under schema browser. However using SQl Developer we could see all the snapshots.
What could be the reason for this?
Thanks

If you're logging in to the schema that owns the snapshots, and you still can't see them, do the following:
go to the schema browser, click on the filter, and uncheck the snapshots checkbox under "types of tables to hide".
Idan.

Not able to produce some Czech characters in pdf using java.

Hi All,
I am not able to produce some Czech characters like ě and č in pdf using java. Can you please guide me what could be the cause. The characters are coded in properties file and its just neglecting č and ě and taking other character next to it.
we have used below code to display the characters but its also not working..first we thought its font issue since Helvetica dont come by default in windows but after putting helvetica font also we are not able to produce the characters.
BaseFont baseFont = BaseFont.createFont(BaseFont.HELVETICA, BaseFont.CP1250, false);
Font fontStyle = new Font(baseFont, 12, Font.NORMAL, Color.BLACK);

baftos wrote:
4th paragraph at http://download.oracle.com/javase/6/docs/api/java/util/Properties.html explains it.
Note also that Java 6 allows you to produce properties files in encodings other than ISO-8859-1, provided you load them via a reader with a matching encoding. (Also see that link posted by baftos.) This might be more practical then the Unicode encoding which was required in earlier versions of Java.

Entire Table not visible/ transferred to a file on application server

HI Experts,
My req is to pass an entire internal table to a file on the application server.
How ever some of the fields in the table are not shown / transferred when i check that file.
The fields are not visible when i try to scroll side wise.
When I download the internal table to an excel all the fileds are present . There is no problem with the internal table that is being transferred.
Below is the code snippet.
CLEAR w_filepath.
    MOVE p_file TO w_file_ext.
    CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
      EXPORTING
        logical_path               = c_zstore
        file_name                  = w_file_ext
      IMPORTING
        file_name_with_path        = w_filepath
      EXCEPTIONS
        path_not_found             = 1
        missing_parameter          = 2
        operating_system_not_found = 3
        file_system_not_found      = 4
        OTHERS                     = 5.
    IF sy-subrc NE 0.
      MESSAGE e068(zz_material).
*   File could not be downloaded to the application server
    ELSE.
      OPEN DATASET w_filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        MESSAGE e069(zz_material).
*   Unable to Open File
      ENDIF.
      CLEAR:rec_final.
      LOOP AT t_final INTO rec_final.
        TRANSFER rec_final TO w_filepath.
        CLEAR rec_final.
      ENDLOOP.
      CLOSE DATASET w_filepath.
Are there any limitations on the no char that can be displayed in one line on the application server.
Is there any seeting to change that...?

Hello Abhishek,
You are not getting the point. AL11 (prog. RSWATCH0) is a simple report used to display the file contents.
There is a limitation to the maximum length of the file line AL11 can DISPLAY (i.e., 512 characters after applying the notes).
Please understand what you are seeing in AL11 is the 1st 512 characters of the file width & not the entire file width.
Hope you get the point.
BR,
Suhas

Application WebDynpro ABAP is not visible in Google Chrome

Hi Experts,
After the Upgrade 7.3 EHP1 in Production System it is not visible the application developed in web dynpro ABAP, in the Employee Self-Service Portal.
In the QA and Development, applications WD ABAP are visible.
What can happen in the Production system?.
Thanks in advance.
Regards,
Briger

>
Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user995809".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
>
Hi, I've an item with label-
Heading: 
Font color is coming in IE but not in google chrome(19.0.1084.52 m). what should I do?
>
To start with, always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
Secondly the <tt>font</tt> element was deprecated 14 years ago and is now obsolete. Do not use it. Stop using any reference material that suggests using it.
<tt>rgb(51,102,153)</tt> is a CSS colour value, which the HTML specification does not require user agents to support for legacy <tt>colour</tt> attributes.
Use standards-based HTML and CSS:
Heading:

Issue with Czech characters in PDFs generated from RSTXPDFT4

Hi,
We have a requirement to generate PDF documents from the spool of the Billing document outputs in our project.
For this we are using the standard program RSTXPDFT4, which converts the SAP script OTF to PDF format.
But the Czech characters in the billing document output are not getting displayed in the PDF generated out of it.
We are already using a device type I2HP4 when creating the print request , which supports Latin-2 Character set ( ISO 8859-2 ), to which the special characters
of East European languages belong.
Even then , the czech characters are not getting displayed in the PDF generated.
We have raised a message to SAP for this, and SAP informed us that currently the only solution to this is to use Latin 2 soft fonts,
and to upload these soft fonts into R/3 System using report RSTXPDF2 as they contain the Eastern European special characters plus all the other characters in ISO 8859-2.
But, since character font definitions (font files) are protected by copyrights, SAP informed us that they cannot provide these font files and we have to acquire
these latin-2 font files by searching in search engines in the internet.
If anyone has the information where we can get these "Adobe type 1 Latin-2" font files with '.PFB' extension, for the proper display of Czech characters, please let me know.

Hi,
Did you or anyone manage to find a reasonable solution for this issue?
I'm currently facing something similar but with Polish characters instead.
I tried using RSTXPDF2 to upload .PFB and .TTF files but to no avail.

Send purchase order via email (external send) with special Czech characters

Hi all,
I am sending a purchase order created with ME21N via email to the vendor using "external send".
The mail is delivered without any problems, PO is attached to the mail as PDF file.
Problem is that special Czech characters as "ž" or "u0161" are not displayed, a "#" (hash) appears instead.
This problem occurs when language for PO output = EN.
Tests with language = CS worked out fine, but the whole form incl. all texts are in Czech as well; so no valid solution since it needs to be in English.
We checked SAPCONNECT configuration and raised note 665947; this is working properly.
When displaying the PO (ME23N) special characters are shown correctly as well.
Could you please let me know how to proceed with that issue?!
Thanks.
Florian

Hi!
No, it's not a Unicode system.
It is maintained as:
Tar. Lang. Lang. Output Format Dev. type
Format
PDF EN English PDF1
Using this option, character "ž" was not displayed correctly, but "Ú" was ok.
All other Czech special characters are not tested so far.
Thanks,
Florian
Edited by: S. SCE - Stock Mngmnt on Aug 14, 2008 10:19 AM

Lightbox Gallery previous and next not visible

I'm still looking for a solution to the other Lightbox Gallery question I posted earlier, but in the meantime I've copied files from the application support folder mentioned before and have the gallery working up to a point.
It works perfectly well locally in Dreamweaver Live View but having uploaded the files to the server the gallery functions without displaying the Previous, Next or Close tabs. They're active but not visible which makes me think there is a failure to load the icons
http://www.yellotestbed.co.uk/shtml/photo_gallery.shtml
Thanks

Looks like you need to fix the links to those images in your javascript.
You have a mix of "images" and "Images" for the directory names in the links. It looks like your actual folder is capital "i" Images. Your local files will work fine, because your OS sees no difference between "images" and "Images" however your server treats them as two different directories so you're getting 404 File Not Found errors because it is looking for a directory that doesn't exist
File names should be all lower case with no special characters ($%&* etc). You should also use hyphens and underscores instead of spaces to avoid issues like this.

Field not visible when uploading the file in application ser

Hi,
I have added a new field at the end of a structure and When i upload the data in the application server it is not visible there. The new field length is 30chars(say field 'A') and the one just before this one is 250 chars(say field 'B'). When i reduce the length of field 'B' to 30 chars or 40 chars the value which i populated in field 'A' is visble in the output file.
Since the complete file was not visible in AL11 transaction, i used the CG3Y tcode as well to download the data to presentation server so that i can view the complete file. Even after downlaoding in presentation server the new field value is not visible.
Can anyone please suggest why is the value in field 'A' not visible when the length of field 'B' is 250 chars? Also, how can i display the value of the new field in the application server.I cannot change the layout of the structure as per the requirement. Any help will be very useful.
Thanks in advance,
Sneha.

Hi Sneha.. Happy new year
<you subject is missing ver from the server, thats why your server doesnt like you :P>
-ok, lets go step by step. how did you upload the file?
-after uploading the file check the file in OS level(goto SM69, execute CAT, in additional parameter (not in parameter) give the full path (case sensitive), execute. ). here you can see the actual content of the file... check you data is present or not
-which structure are you using to download and upload? a temp work area.. then please provide the WA details, so that i can try on my system.
lets see what happens next
one more thing: regarding AL11, it can read upto length 510 characters. check program RSWATCH0 form SHOW_FILE. here the read dataset into butffer is 510 characters.

Chinese Characters not displaying

I am creating a pdf document containing Chinese Characters. The document renders fine for me. I email it to my colleague in China and when she opens the document everything is there in the document except the Chinese Characters. The graphs (survey data), and all the English text render as expected but every bit of Chinese is stripped out. She emailed the document back to me and sure enough all the Mandarin is missing. I am positive that when I send the document by email the characters are there.
I also posted the document on the web thinking that some email gremlin was the cause. When my colleague views this document she tells me no Chinese Characters are visible. Ideas appretiated. -MikeT

Now my English pdf docs are not arriving intact (pages and fonts missing). How do I embed fonts in an existing PDF document? Is that possible? Or, did embedding have to happen at the time of creation? -MikeT

Czech characters encoding problem in RTFTemplate with Velocity engine

Hi,
I am trying to use your RTFTemplate project but I have trouble displaying Czech characters in the generated RTF document. Instead of characters like �čř� I get only questionmarks ????. I thought that this could be related to setting a wrong encoding in the velocity.properties file, so I set it to windows-1250 (support for Czech characters) but it didn�t help. Do you have any idea, what could be the problem? If this is not the right place to ask such question, please let me know about a better one.
Thank you for your time,
Ivo Jansky

Hi Jason,
Indeed I had contacted the provider and informed them about the encoding problem and the fact that passing the parameter http_content_charset had no effect on the sent back encoding.
They have taken into account my request and have changed the encoding used during the request to the HOOK_URL.
Thanks to all of your for your help.
Regards,
Jerome.

Japanese input Kotoeri Maverick Register Word menu not visible

Hi,
I would like to add words to Kotoeri japanese dictionnary, but the menu Flag/Register word is not visible, I tried alt but on succès
Any idea?
Best regards

Ok So I asked on the Japanese Fourms and this is the answer I got back. To be honest I had tried this on my work computer before and it did not work but it is working on my home computer so maybe this will help you.
Mavericks (OS 10.9)ではことえりのユーザ辞書の仕様が変わりました。
The way you do this action has changed with the change to Maveriks.
1）まず、ことえり入力メソッドを追加する必要があります。
Make sure that you have added the Kotoeri Method (I think you have)
→　Add the Kotoeri input method
2）既に追加済みであれば、こちらのヘルプをご確認下さい。
Next use the below link to help you add words to your dictionary.
→　Add words and symbols to a user dictionary
Pretty much you add things to your dictionary like you would add shortcut word like (R) becomes ®.
1. While using Kotoeri, choose Edit Text Substitutions from the Input menu (looks like a flag or character) in the menu bar.
2. In the text pane of Keyboard preferences, click Add to add a word.
3. Type the hiragana reading of the word in the Replace field. Readings of registered words can be no longer than 32 characters. If you’re registering an adjective, make sure to enter the reading in its dictionary form. The ending must be 〜い (~i). For example, あたらしい (atarashii) or たかい (takai). If you’re registering an adverb, don’t include inflective endings, such as 〜な (-na) or 〜だ (-da).
4. Click the With column, then type the replacement word in the With field.A word can be no longer than 64 characters.
Hope this helps you out. I will have to wait until Tuesday to find out if it works on my work computer.
Happy Chinese New Year.

Page oversized entire contents not visible on hvga

Site displayed in full and not scrolling or zooming out on hvga screen making other parts not visible
Note adult site

Problem can be found within the SEND method of the CL_ALERT_MANAGER class. In this method it executes the following code:
 CALL METHOD alert_cat_man->get_short_text
 EXPORTING
 ip_cat = l_cat
 ii_container = li_container
 ip_langu = l_langu
 IMPORTING
 ep_text = ep_textstring.
li_container has an attribute mt_elements which contains the values of the containers of the alert category, the recipients and the logical system.
ep_textstring is an ordinary string.
I have an alert category which has 1 container, a char160 field. I want to put a char140 field in it:
XIDCLNT050 : Testtype on 20070419 / 103154 interval of 30 min, less than 1 received!
This char140 field is put in the &ERROR_TEXT& container.
The ep_textstring is the finalized string (as defined in transaction ALRTCATDEF).
and in my case should look like:
Alert IDOC_MONI: &ERROR_TEXT&
If we put in the actual value of &ERROR_TEXT& we get:
Alert IDOC_MONI: XIDCLNT050 : Testtype on 20070419 / 103154 interval of 30 min, less than 1 received!.
However the output of ep_textstring looks like:
Alert IDOC_MONI: XIDCLNT050 : TESTTYPE ON 20070419 / 103154 INTERVAL OF 30 MIN, LESS THAN 1 RECEI
ep_textstring is 97 characters long and the correct string should be 101 characters long so both should fit easily in a short text.
In my opinion it's a bug in SAP so im trying to get an answer from them.
Kind regards,
Wouter Luijten
edit: got an answer. all texts are 80 characters long. So if your texts are longer than that, they will be truncated.
Message was edited by:
 Wouter Luijten

Czech characters not visible in TOAD

Similar Messages

Maybe you are looking for