"D2008178" - FM to calculate the date of the x day in a year

Hi all!
I am looking for a FM to calculate the date of a certain day in the year.
For example which date has the day 178 of the year.
This has nothing to do with the factory calendar!!!
Thanks a lot for your help
CU
Peter

Hi Peter,
Please check this funtion module "FIMA_DATE_CREATE".
Sample code as follows:
REPORT ztest_vinay.
DATA: w_date TYPE vtbbewe-dvalut.
PARAMETERS: p_date TYPE vtbbewe-dvalut.
CALL FUNCTION 'FIMA_DATE_CREATE'
EXPORTING
    i_date                        = p_date " Here you need to pass first day of the year
    i_calendar_days         = 178
IMPORTING
    e_date                        = w_date.
WRITE: w_date.
Regards,
Vinay
Edited by: Vinay Kumar Amruth on Feb 18, 2009 2:52 PM
Edited by: Vinay Kumar Amruth on Feb 18, 2009 3:01 PM

Similar Messages

How to calculate start date of the week based on week number ?

i need to get week number of the current date and based on that i need to calculate start date falling in the same week for last year.
Eg. today is 31st week of year and 31st july date. so what will be the date on the 31st week of last year. i need the start date of that week.
we can calculate the week number by select to_char(sysdate,'ww') from dual.
DO we have a single line query for that or will it require writing a pl/sql block ?

you can try following query
it can be as inline but for more clean look and create it as select with include select
with t as
(select sysdate as dt from dual)
select to_char(prev_year_dt - to_char(prev_year_dt, 'D') + 1, 'DD.MM.YYYY') as start_of_week from (select
-- get day from prev year with the same week number
    case
           when to_number(to_char(add_months(dt, -12), 'WW')) > to_number(to_char(dt, 'WW')) then
            dt - (to_number(to_char(add_months(dt, -12), 'WW')) - to_number(to_char(dt, 'WW'))) * 7
           when to_number(to_char(add_months(dt, -12), 'WW')) < to_number(to_char(dt, 'WW')) then
            dt + (to_number(to_char(dt, 'WW')) - to_number(to_char(add_months(dt, -12), 'WW'))) * 7
           else
            add_months(dt, -12)
       end as prev_year_dt
from t) t1good luck
Sergii
'Monday' is not first day of week in 100% ;)
Edited by: Galbarad on Jul 30, 2012 11:00 PM

Problem while refreshing the data for the second time using excel services in sharepoint 2013...

Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.Meenakshi

I am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi

How to capture the data within the given range of maximum and minimum values ? from csv files

My requirement,
1. Here, the user will provide the range like maximum and minimum values, based on this range, the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv ‏2439 KB

Hi,
Thanks for remnding me. I forgt to attach the VI,
Here I am attaching the VI, what I tried.
From attached CSV file, I have to find an average value for columns B,C,D,E,F,G,H,I and AJ, AK. ( data range will be defined by user ), focused only on these columns
Here, the scope is to calculate an average value for given data range by user as MAX and MIN data.
FYI: I tried manually for two instance i.e column H & I. As per H column one steady state values from 7500 to 10500 and similarly in I column 7875 to 10050. So, I gave these as a limit to capture and calculate the average value. But unfortunaltely, requirement has been modified as per below requirements.
More Info on requirement:
--> The user will define the range of data by giving some MAXIMUM and MINIMUM values(for above mentioned columns induvidually), then VI should capture that data range and it has to caculate the average value for that range of data. This is the task I have to complete.
--> I am stuck in creating a logic for data capturing for given range of MAX and MIN value from user,
Can anyone help me on this.
If my explanation is not clear, Please let me know.
Many thanks, help mw
rc
Attachments:
VI_rc.vi ‏25 KB
sample.zip ‏4166 KB

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

Could not see the data in the report

Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.

Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

How can i validate the data in the control file?

Consider that the SQLLoader reads the Input data File from the path and it loads the data into the tables based up on the descrition specified in the control File.
First, the table to be filled is created:
create table sql_loader_1 ( load_time date, field_1 Numeric, field_2 varchar2(10)
Sample Control File :
load_1.ctl
load data
infile 'load_1.dat' "str '\r\n'"
insert into table sql_loader_1
load_time sysdate,
field_2 position( 1:10),
field_1 position(11:20)
Note that the positions 11 through 20 are loaded into field_1 and positions 1 through 10 into field_2. The field load_time is filled with the current time (sysdate) of the load.
Here's the data. The name of the file (load_1.dat) had been specified with the infile statement in the control file.
load_1.dat
0123456789abcdefghij
foo bar
here comes a very long line
and the next is
short
Here i want to validate the field_1 (Numeric Datatype) since the data file contains the character value (i.e)abcdefghij

Good question for this forum:
Export/Import/SQL Loader & External Tables
Werner

Cannot Interpret the data in the file

Hi,
I need to upload rate routing and I have created a BDC program using a sample recording.
While I am uploading the data from the flat file, I am getting an error message " Cannot Interpret the data in the file ".
Please help me where I might have gone wrong. I have checked with template in the flat file and it is correct.
Please do the needful.
Thanks,
Ranjan R Jinka
Edited by: Ranjan Jinka on Apr 29, 2011 8:55 AM

Hai Ranjan,
Please, Check this
" Can not interpret the data in file " error while uploading the data in DB
- Check the heading of the excel column and filed used in program.
If possible, please paste the program so the viewers have a better idea and you will get the exact solution.
Regards,
Mani

Not displaying the data in the ALV Microsoft Excel (Ctrl+Shift+F7)..

Hi All,
I can able to display the data through the FM REUSE_ALV_GRID_DISPLAY in the out put screen.When I click on the Microsoft Excel (CtrlShiftF7) at the ALV toolbar to view the same data in excel sheet it does open the excel sheet WITHOUT ANY DATA. Please help me how to make the data visible in the excel sheet.
Can anyone help in this regard.
Thanks & Regards,
Seshadri G

Hi,
Check whether the tool bar export is disabled in the alv.
check in the alv->set_table_for_first_display FM the toolbar exclude export list.
If that is ok, then try download manually by providing abutton and clicking it. You can download data manually in this way.
refer the code below.
DATA: lv_path      TYPE string,
        lv_fullpath TYPE string,
        lc_c         TYPE string,
        v_fnam       TYPE string,
        lc_date(15)      TYPE c.
TYPES: BEGIN OF ts_fieldnames,
            field_name(1000),
         END OF ts_fieldnames.
lc_c = 'C:\'.
WRITE sy-datum TO lc_date.
DATA:lt_fieldnames TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames TYPE ts_fieldnames,
       lt_fieldnames1 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames1 TYPE ts_fieldnames,
       lt_fieldnames2 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames2 TYPE ts_fieldnames,
       lt_fieldnames3 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames3 TYPE ts_fieldnames,
       lt_fieldnames5 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames5 TYPE ts_fieldnames.
CONCATENATE 'ContractAccount'
              'DocumentNumber'
              'Reference/InvoiceDocumentNumber'
              'ClearingDocumentNumber'
              INTO ls_fieldnames-field_name SEPARATED BY
              cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames TO lt_fieldnames.
CONCATENATE '' ''
              INTO ls_fieldnames5-field_name SEPARATED BY
              cl_abap_char_utilities=>newline.
APPEND ls_fieldnames5 TO lt_fieldnames5.
DATA :    ls_str1 TYPE string,
            ls_str2 TYPE string.
ls_str1 = 'Invoice Clearing Posting'.
ls_str2 = 'Payment On Account Posting'.
CONCATENATE ls_str1 ' :: ' lc_date INTO ls_fieldnames2-field_name.
APPEND ls_fieldnames2 TO lt_fieldnames2.
CONCATENATE ls_str2 ' :: ' lc_date INTO ls_fieldnames3-field_name.
APPEND ls_fieldnames3 TO lt_fieldnames3.
CONCATENATE 'ContractAccount'
              'Reference/InvoiceDocumentNumber'
              'PostOnAccountDocumentNumber'
              INTO ls_fieldnames1-field_name SEPARATED BY
              cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames1 TO lt_fieldnames1.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title      = 'Select file for download'
      default_extension = '.xls'
      default_file_name = lv_path
      initial_directory = lc_c
    CHANGING
      filename          = lv_path
      path              = lc_c
      fullpath          = lv_fullpath
    EXCEPTIONS
      cntl_error        = 1
      error_no_gui      = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    v_fnam = lv_fullpath.
ENDIF.
IF v_fnam IS INITIAL.
    RETURN.
ENDIF.
IF i_finalclear[] IS NOT INITIAL.
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename              = v_fnam
        filetype              = 'DAT'
       HEADER                = header
        append                = 'X'
        write_field_separator = 'X'
      CHANGING
        data_tab              = lt_fieldnames2
      EXCEPTIONS
        OTHERS                = 8.
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename              = v_fnam
        filetype              = 'DAT'
       HEADER                = header
        append                = 'X'
        write_field_separator = 'X'
      CHANGING
        data_tab              = lt_fieldnames
      EXCEPTIONS
        OTHERS                = 8.
REgards
sheron

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen)

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Can I select the data of the indexes?

Hi everybody,
Oracle storages indexes in index type segments as I know.
Is it possible to see the data of these index segments like a table or view?
So I would like to see not only the structue of it with:
select * from dba_segments SG where SG.segment_name = ’index_name’
I think something like this:
For example if I have a table named Table1.
(please don’t see the format of the rowid):
Rowid....field1
1_1.......AA
1_2.......AB
1_3.......BB
and I have an index on field1 named ndx_t1_f1.
Create index ndx_t1_f1 on Table1(field1);
I would like to see something like this
(if it is a simple Btree index like the ndx_t1_f1):
Select * from some_schema.???ndx_t1_f1???
Rowid..........ParentRowid..........ValuePrefix..........SolutionRowid
2_1
2_11............2_1.......................A
2_12............2_1.......................B
2_111..........2_11.....................AA......................1_1
2_112..........2_11.....................AB......................1_2
2_121..........2_12.....................BB......................1_3
And if i run:
select field1 from table1 where filed1 like 'B%'
oracle can use ndx_t1_f1 index like this:
2_1 -> 2_12 -> 2_121 -> BB
Yes, I know, there are some promlems with this imagine, but is it possible, or is it a silly question?
Thanx: lados.

Hi,
You asked: „Why do you want to do that?”
Well, I have a table T with fields F1, F2, F3 ...
If I run:
select F2, T.* from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But if I run:
select F2, F1 from T where F1=12345;
the result is one record and the value of F2 is ‘B’.
And this is the same record. Oppps!!!!!
I think the cause of the problem is the next:
I have an index on F1, F2 named ndx_T_F1_F2
In the second case: oracle uses only the index blocks and no table blocks, because all asked data exists in the index blocks.
In the first case: oracle uses the table blocks too, because I asked all field.
And I think there is a corrupted data on the index.
I created a new index on (F1,F2,F3), and I suggest to use this.
select /*+index(T, ndx_T_F1_F2_F3)*/ T.F2 from T where F1=12345;
the result is one record and the value of F2 is ‘A’.
But what is strange, oracle didn’t realise this inconsistent situation.
(It could be an earlier crash, I don’t know, I’m new at this workplace)
I think, the problem can solve with recreating the index ndx_T_F1_F2.
But it’s a very special situation for me, and I would like to see the corrupted data concretly with my eyes.
I think, that
Select * from some_schema.???ndx_t1_f1???
would I see like a view, but it would based on procedures and not tables.
It would be enough to me, because I only could see the data in the index.
But it is impossible as you wrote, isn’t it?
Thanx: lados.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

"D2008178" - FM to calculate the date of the x day in a year

Similar Messages

Maybe you are looking for