Dadatasouce 0TCT_DS22 giving dump in delta load.(

H Experts,
I have Initialised technical datasource 0TCT_DS22 and immidiately wants to fetch delta but it's giving dump.
TSV_TNEW_PAGE_ALLOC_FAILED. This seems to be internal memory problem ,but after initalisation it shouldn't throw this dump.What may be another reason?
When should one go for technical content data loading?is it during normal loads?or later?
Thanks
Girish

Hi,
As Neetika mentioned, it is due to large data volume.
Please check with the basis team to get reduced the jobs scheduled for this activity or try to extract the relevant data by providing any filters if possible.
Regards,
Geeta

Similar Messages

  • /sapapo/ccr runnung in back ground giving dump when i load the result

    hi Gurus,
    when i run /sapapo/ccr report for storage location stoc in back ground and load the saved rerult in variant, system goes into dump when i click storage location stock on the screen, Can you please suggest what could be reason for this.
    Vijai

    i get this error even if i run the report for single plant. after loading the result in /sapapo/ccr suppose i get the below. Now when i click storage location on the screen system shows dump.
    Storage Location Stocks     9     34     0     0     34     0
    Sales Order Stocks     0     0     0     0     0     0
    upon seeing the dump program is terminated at the below step. This program creates parent key and when it tries to find son key system shows blank value. and the program is terminated. same program /sapapo/ccr is not giving any error in foreground
    and we load and process the result for storage location stock successfully.
    CALL METHOD go_parent->go_tree->node_get_first_child
            EXPORTING
              node_key       = lv_parent_key
            IMPORTING
              CHILD_NODE_KEY = lv_son_key
            EXCEPTIONS
              NODE_NOT_FOUND = 1
              others         = 2.
          IF sy-subrc <> 0.
            MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    can you please suggest how this program forms parent and son keys.
    thanks

  • Dump during delta load

    We have taken down time and done a full upload to 2lis_11_vaitm. Deltas are not flowing. When checked up we found in MCEx_11 delta que lot of records are available. But in rsa7 records are 0. When scheduled from delta que to rsa7, job was cancelled and the following is the dump. For info. we have actiated only 2lis_11_vaitm in the application 11. Please help.
    The termination occurred in the ABAP program "SAPLMCEX" in "MCEX_UPDATE_11".
    The main program was "RMCEXUP1 ".
    The termination occurred in line 72 of the source code of the (Include)
    program "LMCEXU14"
    of the source code of program "LMCEXU14" (when calling the editor 720).
    The program "SAPLMCEX" was started as a background job.
    Source code extract
    000420
    000430     IF NOT I_DDIC_HASH IS INITIAL.
    000440
    000450       IF gf_tmsp_hash_ok IS INITIAL.
    000460
    000470         CALL FUNCTION 'MCEX_GEN_AND_CHECK_HASH'
    000480         EXPORTING
    000490           I_FUNCNAME                = 'MCEX_UPDATE_11'
    000500           I_COLLECTIVE_RUN          = 'X'
    000510           I_APPLICATION             = '11'
    000520           I_STORED_DDIC_HASH        = I_DDIC_HASH
    000530           I_STORED_TMSP_HASH        = I_TMSP_HASH
    000540         IMPORTING
    000550           E_DDIC_HASH               = I_DDIC_HASH
    000560           E_TMSP_HASH               = lf_TMSP_HASH
    000570         EXCEPTIONS
    000580           HASH_COMPARE_OK           = 1
    000590           HASH_COMPARE_NOT_OK       = 2
    000600           NO_INTERFACE              = 3
    000610           HASH_ERROR                = 4
    000620           DDIC_ERROR                = 5
    000630           OTHERS                    = 6 .
    000640
    000650       IF I_TMSP_HASH = lf_tmsp_hash.
    000660         gf_tmsp_hash_ok = true.
    000670       ENDIF.
    000680       case sy-subrc.
    000690         when 0. " Compare OK - do nothing
    000700         when 1. "Compare OK - do nothing
    000710         when 2. " Compare not ok - abort
    >           message x194(mcex) with sy-subrc.
    000730         when others.
    000740           message x193(mcex) with sy-subrc.
    000750       endcase.
    000760       endif.
    000770     endif.

    Hi Pooja,
    Did you made any changes to the Extract structure?
    If yes, then the only reason for the error message -----> message x194(mcex) with sy-subrc. is that there was data present in the extraction queue while you changed the extract structure.
    There are 2 solutions:
    1. Either you have to delete the data from Extraction Queue.  (If the system is down i.e., still locked for users posting, you can do this)
    2. Check the solution in SAP NOTE 835466
    Regards
    Hemant

  • Delta load failing with dump TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    When we are loading BW statistics delta load, the load is failing with error "Job in source system terminated --> Request is set to red." and its giving short dump with "TSV_TNEW_PAGE_ALLOC_FAILED".
    I have already gone through Forum and changed package size also. But could not solve the problem.
    We are using 3.5 version, Could you please post your thought ASAP.
    Regards
    Satya

    Hi there,
    Yes that dump is lack of memory...
    So probably your package has too many records to be processed, especially if you have code in start routine or end routine or something like that, the process for each package might take too long and fails with out of memory.
    Try in fact change the package size to a smaller size, so fewer records are processed in each package.
    Diogo.

  • Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

    hi all,
    i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
    not able to figure out the actual issue and how to solve it.
    can anyone suggest?
    below is the details of the short dump
    Short text
        Exception condition "UNKNOWN_TRANSCAT" raised.
    What happened?
        The current ABAP/4 program encountered an unexpected
        situation.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
         exception
        condition "UNKNOWN_TRANSCAT".
        Since the exception was not intercepted by a superior
        program, processing was terminated.
        Short description of exception condition:
        For detailed documentation of the exception condition, use
        Transaction SE37 (Function Library). You can take the called
        function module from the display of active calls.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "RAISE_EXCEPTION" " "
        "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
        "SORT_TRANSACTIONS"
        or
        "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
        or
        "SBIE0001 " "UNKNOWN_TRANSCAT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.

    Hi,
    It seems like some routine are there and check your rotines , transformation etc.
    Regards
    sivaraju

  • Short dump in ECC 6.0 during delta load

    Hi,
    We are currently working in BI upgrade project
    from BW 2.1c to BI 7.0
    At the same time R/3 is being upgraded from 4.0B to ECC 6.0
    During delta load we are getting short dump in R/3 system.
    Below is the short dump detalis
    The current ABAP prgm "SAPMSSY1" had to be terminated because it has come across a statement that unfortunately cannot be executed.
    The following syntax error occured in program "/BI0/SAPLQI2LIS_11_VAITM" in include "/BI0/SAPLQI2LIS_11_VAITM" is not Unicode-compatible, according to its attributes.
    If any help can be provided on this issue it would be great.
    Regards,
    Nikhil
    Edited by: Nikhil Sakhardanday on Sep 11, 2008 1:58 PM

    Hi,
    did you made UCCHECK ?
    /manfred

  • Issue in the Delta load using RDA

    Hi All,
    I am facing an issue while trying to load delta using RDA from R/3 source system.
    Following are the steps followed:
    1. Created a realtime Generic Datasource with timestamp as delta specific field and replicated it to BI.
    2. First I have created the Infopackage(Initialization with data transfer) and loaded upto PSA.
    3. Created a standard DTP to load till DSO and activated the data.
    4. Then created a realtime delta infopackage and assigned it to a Daemon.
    5. Converted the standard DTP to realtime DTP and assigned the same to the Daemon.
    6. Started the Daemon, giving an interval of 5 minutes.
    In the first time, Initialization with data transfer is taking the records correctly. But when I run Daemon for taking delta records, its taking all the records again, i.e. both the previously uploaded historical data and the delta records).
    Also after the first delta run, the request status in the Daemon monitor, for both Infopackage and DTP changes to red and Daemon stops automatically.
    Can anyone please help me to solve these issues.
    Thanks & Regards,
    Salini.

    Salini S wrote:
    In the first time, Initialization with data transfer is taking the records correctly. But when I run Daemon for taking delta records, its taking all the records again, i.e. both the previously uploaded historical data and the delta records). .
    If I understand you correctly you Initially did a full load. Yes? Well next you need to do intialise & after that delta.
    The reason is that if you will select delta initialisation & initialisation without data transfer- it means delta queue is initialised now & next time when you will do delta load it will pick only changed records
    If you will select delta initialisation & initialisation with data transfer- It means delta queue is initialised & it will pick records in the same load.
    As you know your targets will receive the changed records from the delta queue.
    Salini S wrote:
      Also after the first delta run, the request status in the Daemon monitor, for both Infopackage and DTP changes to red and Daemon stops automatically.
    I take it the infopackage has run successfully? Did you check? If it has and the error is on the DTP then i suggest the following.
    At runtime, erroneous data records are written to an error stack if the error handling for the data transfer process is activated. You use the error stack to update the data to the target destination  once the error is resolved.
    To resolve the error, in the monitor for the data transfer process, you can navigate to the PSA maintenance by choosing Error Stack in the toolbar, and display and edit erroneous records in the
    error stack.
    I suggest you create an error DTP for an active data transfer process  on the Update tab page (If key fields of the error stack for DataStore objects are overwrite On the Extraction tab page under  Semantic Groups, define the key fields for the error stack.)  The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer
    it to the target that you have already defined in the data transfer process. Once the data records have been successfully updated, they are deleted from the error stack. If there are any erroneous data records, they are written to the error stack again in a new error DTP request.
    As I'm sure you know when a DTP request is deleted, the corresponding data records are also deleted from the error stack.
    I hope the above helps you.

  • Delta load problem in 2lis_04_p_comp

    Hi
    I am using data sources 2lis_04_p_comp and 2lis_04_p_matnr in my report. When I am doing full load , data is matching with R3 but  during delta load , 2lis_04_p_comp is showing incorrect data.
    WHEN I RUN THE DELTA REQUEST,FOR SAME ORDER NUMBER,WE GET MORE NUMBER OF RECORDS WITH THE EVENT VALUES PA,PB,PC,PD AND PF.
    sO AFTER RUNNING DELTA,THE OUTPUT GI QUANTITY and GI Value  FROM THE REPORT DOES NOT TALLY WITH THE R/3 DATA.
    I am using cube 0pp_c05 where these GI quantities  and GI Value add up giving wrong result
    Please help
    Regards
    Megha

    Hi All,
    For setup table filling for PP datasources having some sequence to follow. You can see in the note 585960. The workaround given by SAP is to deactivate the MATNR data source and fill the tables and then activate and fill the MATNR stuff.
    There are some local issues regarding this activation and deactivation things, because it needs lot of permissions and procedures.
    Please go as per the note procedure.
    Assign points if helful.
    Regards
    Amit

  • "Error occurred in the data selection" on init delta load ODS- InfoCube

    Hi, gurus and experts!
    I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
    "Error occurred in the data selection"
    with details
    "Job terminated in source system --> Request set to red".
    Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
    Any ideas about error? And the way I can load data?

    Hi Gediminas Berzanskis,
    I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets. 
    Meanwhile you may also check the RFC connection of the Myself source system.
    You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
    Try load with a small amount of data with a Full load option and then with a delta option..
    Hope this Helps,
    Prajeevan (XLNC)

  • Short dump in delta extract  using bgRFC in NW 2004s

    Short dump in delta extract after Support Pack install, using bgRFC. 
    InfoSet Query extractor from Z-table residing on BW system into ODS. 
    Init and Full loads load successfully, delta loads short dump.
    "MESSAGE_TYPE_X"        
    "SAPLARFC" or "LARFCU25"     
    "TRFC_SET_QUEUE_RECEIVER_LIST"
    Problem began after support pack install, from SP 9 to SP 12.   Switched to Classic RFC in SM59,  seemed to correct this extractor but caused problems in  other extractors.

    Hi Kevin,
    check out this note: https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1054970&_NLANG=EN
    it might help.
    regards
    Siggi

  • Delta Load to Infocube

    Hi,
    I am facing an issue with delta load to infocube.
    Let me give you the scenaario - I have a standard Infocube and a DSO.
    Data gets loaded to the infocube daily using Delta with filter on sy-datum.
    There a new Key figure which is added as part of the DSO and Infocube recently.
    Our requirement is - we have to populate history for that specific key figure in the DSO and subsequently to the Cube whithout any data duplication for already existing Key figures.
    Hence, we have created a self loop on the DSO updating only the specific key figure.
    Before loading the data into the DSO, while setting the already existing DTP which takes sy-datum is filter to " Initial Update Set".
    Its giving an error which says "Overlapping Selection criteria for DTP".
    Is it something like we cannot change the setting of an already existing DTP?
    If i do a full data will get duplicated for the past dates, hence delta is the only solution.
    But how to go about delta then?

    Jaya,
    If i understand corrctly.....  Data getting loaded from DSO to CUBE through delta with some selection. New keyfigure added to DSO & CUBE ... right...??
    To populate new KF, self loop created(DSO --> DSO) with required mappings(keyfields and new KF).
    Just do full load from DSO --> DSO and push delta to cube. No need to keep any filters while loading from DSO to DSO. Populate new KF for entire data, and while pushing to cube filter is already available at DTP(use exising delta mechanism only from DSO to CUBE). No need of any full load from DSO to CUBE.
    Hope it Helps
    Srini

  • Delta loading error - how to correct

    Hi,
    A error occurs on a delta loading based on 2LIS_02_ITM datasource.
    The PSA had not been loaded because of a dump due to a tablespace overflow.
    I can't reinitialize this delta because there are too much data and I can't reload from the PSA which had not been loaded.
    The tablespace error is now corrected.
    What can I do to reload this delta without loosing data?
    Thand in advanced for your help.
    Best regards,
    Bertrand

    Hi.......
    So request not even came till PSA also.........right.......that u mean to say........there is no failed request also in the target or in the target?........U can make the QM status red of the failed load...........delete the request from the target......and try to repeat the IP..........just check whether the system asking u for repeat delta or not...........it should ask ......bcoz records r not transfered in the BI side..........otherwise ........u hav to go for a Full repair.......but for that u hav to know that what range of records are missed.......u can give a tentative larger range.......
    1) Delete init flag
    2) Do Full repair(After filling the set up table)
    3) Do init without data transfer
    4) Delta.....
    Hope this helps.......
    Regards,
    Debjani......

  • Delta loading take more time

    Hi
    the daily delta load from 2lis_03_bf to cube 0ic_c03
    daily its take max 2 hars but to day its still running for 5 hrs not yet finished with 0 from 0 records
    why,
    how can i  get the reason
    In rsa7 its showing 302 records
    Regards
    Ogeti
    Edited by: Ogeti on May 8, 2008 7:47 AM

    Hi,
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) SM58 and BD87 for pending tRFCs and IDOCS.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - System log can also be helpful.
    Also RSA7 will show LUWS which means more than one record.
    Thanks,
    JituK

  • Delta load still running

    Hi All ,
    i am running weekly delta load to my financial cube .yesterday i schudled this delta load it is still running , can any body tell me how to reschudle this delta load.

    Hi TOM,
    As you mentioned it is still running, then go to the sourcesystem, and check Job log in SM37, and if it is active, wait till it you see any updates in the record number and then try to do something.Also check whether the job has gone to dump because of any reasons. Sometimes it appears still running eventhough the job has gone to dump. Don't worry, Because some of the financial data takes times than any other sales data.
    Hope this helps you..
    Regards,
    Madhu

  • About delta loading for master data attribute

    Hi all,
    We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    Thanks a lot

    Hi...
    1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
    Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
    1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
    2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
    3) then Delta.......
    2. Could you please let me know the detailed procedures to perform this delta loading again ?
    1) Make the QM status red.........to set back the init pointer.......
    2) Repeat the load.....
    After that.........if again load failed with Update mode R.....
    1) delete the init flag.......
    2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
    3) then Delta.......
    Regards,
    Debjani.....

Maybe you are looking for