Daily flow rate totals over several days displayed in Lookout 6.1

I need to display running daily flow rate totals in lookout for several days. The expressions would be for "today", "yesterday", "two days prior" and "three days prior". I am using accumulators to do month to date totals and running averages. I am stumped as to how to accomplish the daily totals. This application is using Lookout 6.1.
Thanks,
Brad Adams
Service Manager
CommTech
Email: [email protected]
Phone: 615-889-4756
Cell: 615-477-8975
"Once you eliminate all other possibilities, what's left, however improbable, must be the solution"

Look into the Sample object. You can trigger this object to log the daily value at midnite.
Previous samples are retained as sample.2, sample.3 etc.
Regards,
Bob L

Similar Messages

My ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button down for 10 and more and also the home button and it will not turn on, i have tried this over several days and still no response

my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages

Try here:
iPod touch: Hardware troubleshooting
Also try placing the iPod in recovery mode and then try to restore via iTunes. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days. Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari,

Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days. Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari, I get perpetual spinning after I fill in and click. Help! Thanks.

Call the store in question:
http://www.apple.com/retail/
Extension 5 in the stores in my area has usually led me to getting ahold of a real person. It may differ by store.

App store says my redemption code is being modified. i tried several times over several days still being modified

app store says my redemption code is being modified. i tried several times over several days still being modified

Snafujafo wrote:
Dear ED3K:
First: I hope you don't work for Apple as you have some poor communication skills in assistance. That said, I would never in a million years pay you 45 dollars to help me. I think I would sleep with Satan first!!
No one here works for Apple. This is a user-to-user technical support forum. Everyone here is a volunteer. You tend to get from this forum what you bring to it. If you come in ranting and raving and saying you're going to throw your iPhone out the window and that Apple is mean, people are not likely to respond to you with sweetness and light and puppies and kittens.
If you really want help, I'd suggest you take a deep breath and then start a new thread in which you explain the problems you're having, the steps you've taken to resolve the problems, any error messages you've gotten. Stick to the facts. Check the attitude and emotion at the door. People will do their best to help you.
Best of luck.

Ical crashes when event not all day over several days

ical shows event across several days when "all day" box checked. when "all day" box unchecked, and specified times span several days, event only shows on first day?

Yes, Apple any help for this would be great. The only way I've come to work around is to use multiple events. So for a flight out of town would be one event, and the return another. I would create a third event then for the actual time out of town. There must be some way to easily fix this.

Events spanning several days

Hi there,
When I'm adding an event spanning several days (eg a holiday) the dot on month view only displays on the start date. This is quit unhelpful when quickly looking at whether I'm free on a particular day.
Am I missing something? Should I be using the repeat event function rather than extending the event date over several days?
thanks,
Sam

Hi there,
While 'All days' may solve some of those problems, you loose the time information on those events, so it is not usefull for events that go from 3 pm on one day until 5 pm three days later...
There should be a Preference Option to display events over several days in a Month view as an extended bar. I would desperately need this feature especially for calendars that are only imported via subscription... and there it is not possible to 'edit' events and 'All days' events are often not a choice.
Also would be great if there would be a Year View ! (Apple are you listening ?)
If anybody knows of any 'workaround' I would be happy to hear it!
Cheers,
Matthias

Ageing report on over 30 days

Hi Experts
How to do the selection for Ageing Report in Over 30days, Over 211 days Above 30 days, Total Over 30 days explain detailed with offest values.
Edited by: Sk Babu999 on Dec 29, 2010 2:01 PM

Hi:
Take a look at the paper by Surendra Reddy.
"Calculating the Ageing of the Materials"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?quicklink=index&overridelayout=true
Another example is the paper by Neelesh Kumar Jain.
"Creating Bucket Scenarios using Exception Aggregation (SAP Netweaver 7.0 BI)"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09f49c2-7448-2c10-ac92-d75f263a0dce?quicklink=index&overridelayout=true
Regards,
Francisco Milán.

Display of events spanning several days

Hello,
When I create an event (all day) in Outlook spanning several days, after syncing the iPhone shows the entry on every single day.
When I do the same with an appointment which is not "all day" (let's say Friday 17:00 - Sunday 15:00) the iPhone only displays the moment of the start. Is that a bug, desired behavior? Any chance to configure it so that I see the starting point plus an entry for each day that is involved?
TIA!!

I suspect it's a glitch. When I create an event in Outlook as you suggest (today at 1p to Saturday at 6p, for example), I see it on the phone as spanning that whole time, i.e. the event fills part of today, all of tomorrow, and part of Saturday. However, I'm not syncing via iTunes but over-the-air with Exchange.
If you can reproduce this, definitely let Apple know.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

"Downloading the latest applications" has been displayed at the MSN Toolbar last several days. How do I cancel or disengage it?

Last several days "Downloading the latest applications" has been displayed at the MSN toolbar. I do not know how to cancel or disengage it.
== This happened ==
Every time Firefox opened
== Three or four days ago.

You can disable the MSN® Toolbar (Tools > Add-ons > Plugins)
See [[Troubleshooting plugins]]

I reorganised my music organisation totally in iTunes on my Mac (Lion). iTunes does not sync this new artist organisation to the iPod and many albums are divided over several artists. How can I change this?

I reorganised my music organisation totally in iTunes on my Mac (Lion). iTunes does not sync this new artist organisation to the iPod and many albums are divided over several artists. How can I change this?

I've called the Apple helpline. The only way to organise music on the iPod classic, is to use playlists. They themselves can be organised in playlist folders.

Totalizing a flow rate but not calculating if a negative number

I know how to take a flow rate and produce a totalizer using an integration. What I would like to do is not calculate the integration if the incoming rate should be a negative value. Thanks in advance for your help.

hound,
you may use an EXPRESSION OBJECT to eliminate negative values, something like:
if(YourSignal.value>0, YourSignal.value, 0)(if the value of your signal is greater than zero, use your signal, else zero)
and connect the output of this object to INTEGRAL.
Hope this help
JPSS

I am so disgusted with Verizon CS. Six hours over two days on the phone to upgade a phone and my plan. More to come, but I have names, and even a direct phone number to a "supervisor". I'll be posting more... The incompetence of EVERYONE (which is alm

I'll be posting all the details of this tomorrow.

So, I'm back, the OP.
As briefly as i can:
Two phone family, currently one smart, one dumb phone. The dumb is eligible for upgrade.
Call into V and spoke with "Anthony" to get info on what plan(s) I might consider as I upgrade the dump to a new iPhone 6. Currently an old "grandfathered in" Nationwide 700 plan. This was Friday Sept 19. Get some info, which I assumed to be correct, including the fact, his words not mine, that the "upgrade (device) fee" can be negotiable.
Before I had any first hand knowledge, I assumed that I'd better get a "second opinion" so I drove over to my local Verizon (corporate) store. Well, I got a different story, including the percentage of my employee discount on service, my employer gives a 20% discount and has for years, I have my current statement / bill in my hand. But no.... Verizon guy says that is wrong, its only 18%. I ask him about upgrade fee being negotiable. He says no, never. So what had I learned? That V guy on the phone from Friday was either lying or just ignorant.
Soooooo.... now its Tuesday, Sept 23. The "BIG" day, day of 3 hours 50 minutes on the phone with SEVEN different V people, all of them telling me something different about what plan(s) I'm eligible for, your employee discount is 17, no 18, no 20 percent. Yes we can negotiate an upgrade fee, no we can't... At one point, now a couple hrs into it I say I've had enough, I want to talk to a supervisor. "I'm sorry sir, supers can't come to the phone" WHAT? Well later, once I did speak to a first level supervisor and then a second level I of course found out that was wrong - more lies / misinformation? The supervisor took the name of that V CS rep and looked at my every growing call log and said that he would speak to the CS rep.
So, nearing the 3 hrs mark into my attempt to find out about plans and buy an upgraded phone for my plan I reach "Brian". I have his direct number. Apparently he is something more important that the past 6 people I've spoken to over the past thee hrs. I tell him: "EVERY SINGLE PERSON I've spoken to so far has told me something different, and or contradicted what the last person I've spoken to has said!!!!!" Yes you can have 2 single line plans, no you can't, to get this plan your upgrading device has to be on the "Edge" plan, no it doesn't, your employers discount applies to the bottom line, no it doesn't, only to the data, and on, and on, and on.
Sooooooo I tell Brian, "here's how its going to go... YOU are going to wave the upgrade fee. I don't care where the money comes from, V or right out of your pocket. I've been on the phone for now closing in on FOUR HOURS...."
Sooooo he agrees. I laugh and tell him, "You know, it has nothing to do with the money, not its all about screwing V as much as I can, and wasting yours and V's time."
He says, order your phone and plan this week and I'll call you Friday (today Sept 26) and then credit your account the fee.
Soooo yesterday (Sept 25) I call in to do just that, order the phone and plan, WHICH I was told really the only plan that would suit you would be a More Everything Plan. So, ok that's that.
I speak to a CS / Sales rep. I buy the phone and then we go on to the plan. I tell the rep THIS WHOLE LONG STORY, and it looks like we are heading towards the More Everything, BUT she says to me, "you know, you could do that Single Line plan for BOTH of your phones?" I say "WHAT????" I was told by two reps NO, and two reps "Well.... maybe". This plan gets me everything I want AND saves me $10 a mo.
Sooooo we go for that, BUT.... I can't change my plan (from current Nation Wide 700) to 2 two single line plans until I activate my new phone (which will be 4 weeks until I get it - iPhone 6), SOOOOO once it arrives I HAVE TO CALL BACK TO V and switch - how much fun will that be??? MORE time (hours?) with V.
So we agree.... The rep says I just have to transfer you to our automated system where you'll agree to terms and conditions.. Fine. Up comes the computer voice... and.... it says "hello.... you are upgrading your device (123) 555-1234 (it gives a real number), press 1 if this is correct." WHAT???? That is NOT the phone number of my device ***? The auto system gives me the option to press another number to "enter a different number", so I do, AND...... The call disconnects.
Now... If I could track down ANY ONE OF THE PAST 8 PEOPLE I'D SPOKEN TO OVER THE PAST TWO DAYS, YOU'D BE READING ABOUT ME - "Upset customer KILLS everyone at V". I AM SO ******* ****** OFF AT V... I'm now into 2 hrs today, plus the nearly 4 hrs the other day on the phone.
Soooooo.... I call back, have to tell the story again, this time to "Nick" in N.Y. Nick says just go on line to your account, you can accept the terms there. Well, what do you know.... It works, amazing.
But.... Nick says great and reads back the info on the phone I bought and says "...and I see you are on the More Everything Plan..." WHAT, STOP, STOP, STOP. I tell Nick, "Nope, I am not, I never agreed to that, I'm waiting, keeping my old plan for 4 weeks until I get the new phone, THEN I'm to call back (oh joy) to V and upgrade my plan"
Nick say's well you have the More Everything plan, and it is costing you $10 more a month, BUT I can't un-do it because there is a purchase (my phone) in progress... I am not BEYOND MAD. We are now at SIX HOURS TOTAL TIME ON THE ******* PHONE OVER TWO DAYS.
I ask to speak to Nick's supervisor. Melanie comes on the line. I, weather she wants to hear it or not, TELL HER THE ENTIRE STORY, that when (and GOD help him if he doesn't) Brian, the top end supervisor calls on Friday (today) to check on my experience buying the phone / upgrading the plan AND to credit my account the upgrade fee, I'm going to have to tell him about EVERYTHING THAT'S HAPPENED TODAY and about the TWO MORE HOURS ON THE PHONE. Melanie says, yes you do now have a More Everything... All I can do sir is apply a credit back to your account for the difference in cost between your old (what was my current) and the new More Everything (the plan I NEVER agreed to be on).
So, that is where we are as of now, Friday Sept 26 AM. "Brain" said he'd be calling by noon-ish Pacific time. I've got his direct number, and If I don't here from him by noon, his phone will be ringing off the hook very 30 seconds until he picks up.
My experience to simply upgrade one of the two phones on my plan and the plan itself HAS BEEN A NIGHTMARE. VERIZON is sooo SCREWED UP. NO TWO PEOPLE KNOW THE SAME INFO, and the INEPTITUDE displayed is sickening.

Issue in picking the daily exchange rate on Inovices.

Hi All,
I am facing a problem with the daily exchange rate on invoices from a particular sales organization. We have an issue when an invoice is cancelled and then reissued. Currently the new invoice is taking the exchange rate from the original invoice which is incorrect, it should be pick a new exchange rate from the day that the new invoice is created.
Are there any configuration settings for this. Where do i need to check.
Would appreciate your help if you could help me.
Thanks,
Mercy

Hi Mercy,
Go to transaction FBZP ->"paying company codes"-> double click the company code and check if the field
"Do not Post any Exchange Rate Differences" is flagged.
"Do not Post any Exchange Rate Differences
Use
Ensures that no exchange rate differences are posted by the payment program.
If the indicator is set, no exchange rate difference posting is generated. The amount in the bank posting in local currency does not result from translating the foreign currency amount at the current rate but from the total of the local currency amounts from the settled items.
If the indicator is not set, the difference between the exchange rate at the time of posting and the exchange rate at the time of payment is determined for items which are posted in foreign currency. The payment program uses the translation rate in the currency table in the system for this purpose.
The exchange rate differences which have been determined are automatically posted for each payment. A valid table rate is used when you post to a bank account or a bank sub-account."
I hope I could be of assistance.
Regards,
Fernando Evangelista

Frame rate - total frames - time

I want to get the total frames of a movie in level6, running
at 12 frames per second and convert that to minutes and seconds as
well as the current time elapsed and display them in dynamic text
fields on level8 with the variable names: "timecurrent" and
"timetotal" so that I can have it display the current time next to
the total time of the movie that is playing.
Ideas on how to do this?

Thanks for the input. I have read about _totalframes, etc.
and know in general that I would get the total frames, divide that
by frame rate (12) to get seconds, and then somehow do some more
math (divide by 60) to get that into minutes, but my actionscript
skills aren't good enough to know how to convert seconds into
minutes and left-over seconds and display that in a way that users
will understand as well and to get the _currentframe converted to
minutes and seconds and display that nicely. I was hoping someone
could point me in a direction to get bits of code where people have
already done some of this so that I could learn from it and modify
it to fit my situation.

Table: Span field over several rows

Hi,
It would like to display the entries in a table each in three lines
+-----------------------------+------------+---------------+----------+----------------------+
| Field 1                     Pause     Traveltime   Hours   Field 5             |
|                                Task                                    Location           |
|                                Description                                                  |
+-----------------------------+------------+---------------+----------+----------------------+
Is it possible to span one cell over several rows?
Greetings, Vanessa

Hi Vanessa,
If you not really need a table, but more a tabular layout, you may consider using the RowRepeater control.
This way you have total control how your 'rows' look like. You could for instance use a VerticalLayout in a RowRepeater cell to allow 3 items in a vertical layout.

Daily flow rate totals over several days displayed in Lookout 6.1

Similar Messages

Maybe you are looking for