Daily, WTD, and MTD detail based on 0CAL_DAY

I am trying to set up a report to disply daily, WTD, and MTD based on cal_day, but am having trouble getting the WTD or MTD.  I'm either able to get the WTD detail, but the MTD will look like the WTD or vice versa.  I've tried different variables, hierarchies, summarization, etc. and am out of ideas.  Does anyone have a suggestions?  Following is what is currently displayed in the report, but I need to get a running total on MTD (currently, it looks like WTD).  Thanks for any suggestions!
     Actual Sales          
     (000s) US Dollars          
Cal yr/wk
Cal Day     Daily     WTD     MTD
05/2008     
2/1/2008     $221     $221     $221
2/2/2008     $6     $226     $226
06/2008               
2/4/2008     $259     $259     $259
2/5/2008     $514     $773     $773
2/6/2008     $412     $1,186     $1,186
2/7/2008     $338     $1,523     $1,523
2/8/2008     $288     $1,811     $1,811
2/9/2008     $197     $2,008     $2,008
2/10/2008     $12     $2,020     $2,020
07/2008               
2/11/2008     $261     $261     $261
2/12/2008     $448     $709     $709
2/13/2008     $316     $1,025     $1,025
2/14/2008     $295     $1,320     $1,320
2/15/2008     $332     $1,652     $1,652
2/16/2008     $59     $1,711     $1,711
08/2008               
2/18/2008     $338     $338     $338
2/19/2008     $302     $640     $640
2/20/2008     $400     $1,040     $1,040
2/21/2008     $514     $1,555     $1,555
2/22/2008     $653     $2,208     $2,208
2/23/2008     $294     $2,502     $2,502

Hi Sandeep,
Thank you for your reply.  I'm able to get the result sum to display as I need them- WTD shows the WTD total and MTD shows the MTD total, but I also need to get the detail- the MTD needs to show a running total, right now it's only showing the WTD total and resets after each weekly result.  If I remove the weekly result, I can get a running MTD total, but then I lose the WTD running total- it looks like MTD.  For example:
I currently have:
Week 1
Daily    WTD    MTD
5           5         5
2           7         7
             7         7     (Total for week 1)
Week 2
Daily     WTD    MTD
3           3          3
4           7          7
             10        14     (Total for week 2)
What I need to show is:
Week 1
Daily    WTD    MTD
5           5         5
2           7         7
            7          7    (Total for week 1)
Week 2
Daily     WTD    MTD
3           3          10
4           7          14
             10         14       (Total for week 2)
Is there anyway to get the detail level to display the running MTD total?

Similar Messages

  • Help required to get GR and IR Detaisl based on PO

    HI,
    I need some help in developing BAPI to get GR and IR details based on PO. Could anyhow help me out in getting this. I need to pass PO as import parameter and should get all the GR and IR values for the same. Pls send me the flow to get these details..Also the tables related in developing this..
    Regards,
    Ramesh

    Hi,
      By passing the PO number, GR details can be obtained from the following, MSEG, MKPF, PO number is found in MSEG table,
    IR details can be obtained from RKPF & RSEG, you find the PO number in RSEG table,
    Rgds,

  • Function Module to get PO details based on Plant and PO date

    Hi
    1. Is there any Function Module to get PO details based on Plant and PO date?
    2. Is there any Function Module to get Material document details based on PO number?
    Thanks
    Narendra

    hi,
    check these standard reports.
    ME2L - By vendor
    ME2M - By material
    MSRV3 - By service
    ME2K - By account assignment
    ME2C - By material group
    ME2B - By tracking number
    ME2N - By PO number
    ME2W - By supplying plant
    also chck this func module.
    REPL_LIST_PURCHASE_ORDER_READ
    reward if hlpful.

  • Master and details based on business component

    Hello,
    I search sample Application master and detail based on business component. how build model and View please any one know link show that step by step thank you.

    Hi
    http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm
    there is not much into it really...
    you just select your model project, right click and select new and in the wizard, choose Business Components from tables.
    You should, at least have a database schema with at least one PK and FK declarations.
    the wizard will take care of everything else.
    Regards,
    Dimitris.

  • Please help me in Calculating Sybase IQ Daily,WTD,MTD, YTD,QTD,SPLM,SPLY

    Hi Team,
    Need to Calculate No of Customers from a particular dimension table on these measures Daily,WTD,MTD, YTD,QTD,SPLM,SPLY
    Can anybody help me with the Logic its extremely urgent.
    Thanks all for your help
    Regards,
    Yedu

    Is that part of an entire script, I don't see the tokens changing as TimG observed is this being called from a different routine. (are you calling the same script using a for loop?)
    I think instead of updating the subvar everytime, he just used a bat/sh script to run it for various members.
    Regards
    Celvin
    http://www.orahyplabs.com

  • Adobe Configurator and deprecated Flash-based panel support in Adobe CC products

    Does Configurator 4.0 (or Configurator 3) support the creation of HTML5-based panels?
    I received the following email from Adobe: 
    Photoshop CC, starting in the middle of 2014, will remove support for Flash-based extensions. All other Creative Cloud products have already marked Flash-based panel support as deprecated at this time, meaning no future enhancements or bug fixes will be coming for Flash-based extensions.
    The current version of Photoshop CC already includes support for a new type of HTML5 based panel. We are currently working on a new version of Adobe Extension Builder designed specifically to support the creation of these HTML5 based panels.  You can download a free preview here: http://labs.adobe.com/technologies/extensionbuilder3/.
    Details about developing HTML5 extensions for Photoshop as well as for other Creative Cloud products are available in the Extension Builder pre-release program here: https://adobeformscentral.com/?f=6V6IgvE0yLQQ7bgadxNXaw .   You can also join the Photoshop developers' prerelease program for details specific to Photoshop.  If you're interested, please let me know and I will get you setup.
    Will the panels created by Configurator 4.0 work in PS CC after the middle of 2014 when support for Flash-based extensions is removed from Photoshop CC?  For that matter, will the panels created in Configurator 3.0 work in PS CC after the middle of 2014?

    I've carefully read all the posts here and would like to give my feedback on the whole question. I'm a professional retoucher and a teacher as well, and during my professional carrer I've built dozens of panels.
    I do really take advantage of boosting my productivity with any customized panel, as automation is something that adds speed, reliability and dramatically reduce errors during repetitive tasks. Therefore, I can't live without it.
    Now, I  understand why Adobe wants to move towards HTML 5, but please give us the ability to keep our work at the same level of efficiency we currently have. Photoshop is not for amateurs, it's a professional software. And professionals must keep their productivity, for sure they can't afford any loss of it, especially in these times!
    Moving from Flash to HTML 5  means rebuilding all the existing panels from scratch: how much this will cost to us in terms of time (and money) if we could have an HTML 5 version of Configurator? And how much, if we don't have a tool like Configurator at all? Three times, ten times as much? Maybe Adobe knows the answer, not me, I'm not a coder. But I'd like to know this answer.
    Further, picture this: I've taught several classes for at least  five intercontinental companies on how to build actions and organize them into panels for improving their productivity. Every time the response was the same: BOOM!
    They had a huge speed improvement in their daily workflows, and started to build dozens of panels by themselves for any possibile use. It was like opening a Pandora's box for them (their words).
    Every one who attended my classes, have taught the same topic inside their company and the reaction was always the same. So now, in every company in which I've taught building panels and actions, there are hundreds of panels for many different uses, all over the world. Of course, as 100% of them were specifically built for internal use, they shared the panels among them, but not outside their company.
    Many of them who are now mid-advanced users, have written to me asking how they could keep their panels working correctly in the next CC version of Photoshop. I have no solution for them, unless many of them become coders. That's a bad answer, I must admit, but no way out right now.
    Their reply to me was very straight: "well, we won't upgrade any copy of Photoshop until we can keep our panels working correctly for sure. For us is much more important being productive and efficient than upgrading to the latest version, if this means to lower our performance, no doubt."
    Adobe wanted to integrate all their softwares into the Creative Cloud. So far so good, I'm for it. But when you decide to integrate everything saying to the world that "it's for the sake of a better productivity", then you must really integrate them. Otherwise people will think that it was only a commercial move. So why we can't build panels for the applications inside Muse, for example? It was introduced to allow people to build  websites quickly and efficiently using HTML 5, taking care about the layout instead of investing too much time in coding.
    Exactly what Configurator allowed to do. Focus on the result with minimal time cost, aka money cost.
    World is running faster, therefore we need to work faster too. And without Configurator we won't. I can't disagree with all the people that won't upgrade Photoshop, if this means that they'll work slower because they can't use their panels carefully made by themselves. Photoshop is a tool for producing ideas and other nice stuff, like any software. The faster it is, the most people will like it, the better will sold. A simple truth. Think about what happened to Apple Finalcut ProX and how many users switched to Premiere. Photoshop has no competitors except new versions of itself.
    And this does not apply only the CC users. Look at the bigger picture: how many users still using CS6 with all their fully working panels won't upgrade to CC if they know they'll reduce their productivity?
    Think about the answer. Carefully.

  • How to get Week,Month and Year details from a date column

    Hi frenz,
    I've a column like tran_date which is a date column..... I need the next week details based on this column and so on...
    I need month and year details as well based on this tran_date column.... can any one tell me how...
    Thanks in advance

    My example for objects:
    create or replace type date_object as object
      centure number,
      year    number,
      month   number,
      day     number,
      hour    number,
      minute  number,
      second  number,
      daypart number,
      week    number,
      constructor function date_object(p_dt date)
        return SELF as result
    create or replace type body date_object is
      constructor function date_object(p_dt date)
        return SELF as result
      as
      begin
        SELF.centure:= trunc(to_char(p_dt,'YYYY')/100);
        SELF.year:=    to_char(p_dt,'YYYY');
        SELF.month:=   to_char(p_dt,'MM');
        SELF.day:=     to_char(p_dt,'DD');
        SELF.hour:=    to_char(p_dt,'HH24');
        SELF.minute:=  to_char(p_dt,'MI');
        SELF.second:=  to_char(p_dt,'SS');
        SELF.daypart:= p_dt-trunc(p_dt,'DD');
        SELF.week:=    to_char(p_dt,'IW');
        return;
      end;
    end;
    select date_object(sysdate),
           date_object(sysdate).year
    from dual;Regards,
    Sayan M.

  • Pl sql procedure to retrieve user details based on the input

    hi,
    I am looking for an example which will retrieve the data based on what he requests. I mean: the user types in an request_name, the procedure will check if the request_name already exists. If yes, then it will retrieve the request_name and other columns from the table R. Else it will create a new request by adding request_name and other details to the table.
    hope this is clear some1 could help me
    thanks

    If defaults are set for the request table fields and you can get by inserting only the request_name field, perhaps something like the below would work?
    T_REQUEST is the table, REQUEST_NAME is the field you mentioned. If the function finds the record, it returns it as a record. If it doesn't, it inserts a blank record with REQUEST_NAME populated:
    CREATE OR REPLACE FUNCTION REQUEST_LOOKUP
    ( V_REQUEST_NAME IN T_REQUEST.REQUEST_NAME%TYPE )
    RETURN T_REQUEST%ROWTYPE
    AS
        R_REQUEST T_REQUEST%ROWTYPE;
        CURSOR C_REQUEST IS
            SELECT *
            FROM T_REQUEST
         WHERE REQUEST_NAME = V_REQUEST_NAME;
    BEGIN
        OPEN C_REQUEST;
            IF C_REQUEST%NOTFOUND
            THEN
                INSERT INTO T_REQUEST (REQUEST_NAME)
                VALUES (V_REQUEST_NAME);
         ELSE
                FETCH C_REQUEST INTO R_REQUEST;
                RETURN R_REQUEST;
         END IF;
        CLOSE C_REQUEST;
    END REQUEST_LOOKUP;

  • Different Exchange Rate between Daily Transactions and Tax Transactions

    Hi All,
    I would like to ask abount define Exchange Rate for tax calculation. I set our standard exchange rates (For Daily Transactions) by using exchange rate type 'M'. But I want to calculate the tax element using exchange rate type 'T'. It is because there is a different exchange rate which is used for Daily Transaction and Tax Transactions. Does anyone know a way of doing this in config to separate this exchange rate for tax calculation?
    Thanks for any help,
    John

    I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of  Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
    Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

  • Fm to display material details based on material description

    Hi,
    Is there any bapi or fm to display material details based on material description
    Regards,

    Hi,
    Get the material number from material description from MAKT table and then use the FM BAPI_MATERIAL_GET_DETAIL.
    Regards,
    Nagaraj

  • Master Recipe details\ Inspection details based on the ECR number

    HI All,
    Could you please help me in finding one FM which gives Master Recipe details\ Inspection details based on the ECR number which is created in CC31.
    In the Transaction CC31 for a given Change Number,  there is a Master Recipe and Inspection in the Objects button -> Task list . We need Master Recipe and Inspection details associated with that particular change number.
    Awaiting your response
    Thanks,
    Chetan

    HI,
    Check this FM MRTRS300_MASTER_RECIPE_READ

  • Adaptive payment details based on AppId.

    Dear All,                     We have an application where we have setup Paypal application. We have used adaptive payment and AppId in our android application. By our application one client can send payment to other client, where merchant does not come to picture. We have server setup too, we want to get the payment details based on the AppId and PayKey. It is possible ? Please let us know if any information you need. Thanks in advance. Thanks,Omprakash

    Hi,,
    you can give the the business area in t.code F-47( adv payment request ). there u find a business area & give one business area and  if u want to post another business area there is a new item tab to enter another business area then  over view  & post the document .
    u r problem get solved
    Regards,
    R.N.Reddy

  • Keeping Groups and their Details together when printing a report

    So I created my Groups...[Claim #], [Rec #], [Line #], and [Service_Date] and set the Group Properties Page Break and checked
    Between each instance of a group. I also made the
    Keep Together property to True for all my Row groups and details then.
    When I run in Preview it looks PERFECT!. Then when I actually go to print the report, the grouping is printing on one page and the details on the following page. This is unacceptable.
    Then I Googled and found this...
    https://connect.microsoft.com/SQLServer/feedback/details/428595/keep-together-property-not-working-in-ssrs-2008
    Which makes it seems as though the Keep Together Property has a bug. Unless the
    Keep Together implies in Report Design View. But it does say
    KeepTogther Indicates whether to keep all sections of the data region together on one page. Yeah...but "page" meaning viewable page or printable page...
    I also found this work around which I really don't understand as to what I'm supposed to do.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/692d85d3-87fe-483f-8267-98213795ef1e/third-major-flaw-with-reporting-services?forum=sqlreportingservices
    Has anyone else experienced this issue? Is this still a problem in SSRS? And can anyone please help me with the work around?
    Thanks in advance and am hopeful for a reply.
    ITBobbyP85

    Hi ITBobbyP,
    According to your description, you have Groups [Claim #], [Rec #], [Line #], and [Service_Date] in the report, and added Page Break to the groups. The report looks normal when you preview it, but when you go to print the report, the groups displayed on one
    page and the details on the following page.
    Based on my knowledge, the issue is due to report size. Page orientation of report is Portrait(8.5in X 11in). If the width of tablix is larger than report page, the groups and details will be displayed on different pages. In this case, we need to change
    paper size to a certain value, please refer to the following steps:
    Right-click outside of the report body and click Report Properties.
    In Page Setup, select a value from the Paper Size list. Each option populates the Width and Height properties. You can also specify a custom size by typing numeric values in the Width and Height boxes. Click OK.
    For more information about setting page size, please refer to the following document:
    https://community.dynamics.com/crm/b/magnetismsolutionscrmblog/archive/2013/10/30/ssrs-using-page-size-and-interactive-size-to-manage-printing.aspx
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • Differences between VBAP and S605 (MCSI) - based on incoming orders

    Hi experts,
    I have a question about the differences between the table vbap and S605 (MCSI) based on incoming orders.
    In my case, I display an customer order (VA03) with two order items. Both order items were created last month (10.01.2013).  
    By way of example:
    order item 10: 10.000 EUR net value
    order item 20: 15.000 EUR net value
    When I execute the transaction MCSI (InfoStructure S605), the relevant sold-to party generates an incoming order in amount of 10.000 EUR in the period 01.2013. So, order item 20 are not generates an incoming order. What ever it is.  
    If I display the table VBAP, both order items (10 and 20) are existent with the net values (10.000 EUR and 15.000 EUR) and the create date 10.01.2013.
    By the way, the order item 20 has not an reason for rejection.
    Did anybody already had this kind of problem?
    Thanks in advance and best regards
    Michael

    Hi Michael,
    We are talking about a customer SIS (605 is in the customer range name and MCSI is for running customer SIS). For checking it, I suggest some ideas:
    1. Check how this SIS is populating S605. Run tcode MCVR for this SO and check the logs.
    2. Read carefully this notes and consider them as a checklist:
         Note 174141 - SIS: Collective note - Customizing
         Note 204130 - SIS update: Collective note
         Note 174134 - SIS: Collective note - reorganization
    3. Check the values of STAFO in SO tables (VBAK, VBAP,..)
    4. Check the updating of S605 with tcode MC26 and check if there are formulas or requirements for the key figures.
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot this detail: Check the logs for the update of SIS/LIS in production system. Check also SAP Note 1002904 - Analysis of TMC2P, TMC2Q and TMC2F
    Message was edited by: Eduardo Hinojosa

  • My iPod touch will not let me download more apps, though I have sufficent memory space, and other internet based functions are running...

    though I have sufficent memory space, and other internet based functions are running...

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    However, since it works with other networks that really suggests a problem with your network.

Maybe you are looking for