DAQ Assitant Express VI Wizard won't run if not administrator

Running LV 7.1, DAQ Assistant Express VI Wizard won't run if not logged in as administrator. I've given full permissions to the NI folders for Everyone to see if it was a priveliges error but it didn't work for this problem.
What would need to be accessed that an admin has access to, but a typical user doesn't seem to?
Thanks,
Tim

I found another post w/a temporary fix, this one can be deleted.
Thanks,
Tim

Similar Messages

Firefox won't run why not?

Today is 9/8/10 this morning I used Firefox and it worked fine but later this evening no matter what I try Firefox won't run. I have yet to try deleting Firefox and re-installing it I would like to avoid this so I dont loose my history or my favorites

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

DAQ program compiled under Win2k won't run under Win 95.

When I compile a LabView 5.1.1 vi program that uses lvdaq.dll on my Windows 2000 workstation, that same program will not run on a Windows 95 notebook computer. Error code 21 (external subroutine could not be found) is reported for all standard DAQ vi's calling functions within lvdaq.dll even though the dll can be found in the program directory, the system directory, the vi.lib\daq directory, and via the system path. The same program compiled on a Windows 95 workstation runs on the Windows 95 notebook computer just fine. Why is lvdaq.dll not found when the program is compiled under Windows 2000? Do I need the same version of NI-DAQ on both computers?

Larry;
If you are doing NI-DAQ function calls on your VI you need to match the NI-DAQ version on both machines, otherwise, depending on what functions you are calling and what are the NI-DAQ versions, you might get some errors. Just for future reference, this procedure is good for NI-VISA (if you are using VISA VIs) and NI-488.2 (if you are using GPIB boards) as well.
Regards
Filipe Altoe
Application Engineer
National Instruments

Help Won't Run, Javascript not enabled.

LE9, help says "The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content."
But, java works on the Internet, etc., and I can't figure out how to "enable" java script in LE9.
Any help would be appreciated.
BTW< this is an Intel iMac with OSX10.5.8

Wow, you give others 9 hours to help you. Great. How about searching this forum for the word "JavaScript"? The search box is on the top right in your window. You would find the answer within a few seconds...
Here is the link to the thread that explains it:
http://discussions.apple.com/thread.jspa?threadID=2147527

Can't open properties window of DAQ assistant express VI.

I have a program which uses DAQ assistant express VI's, reading several channels from a NI PCI-6220 card. Its been working fine for months but now some of the channels have started acting up, noise and oscillations that are not real. I've solved this problem by changing channels before but now when I try to open up the properties window of the DAQ assistant express VI to change channels, by double clicking the icon, or by right clicking and selecting properties, nothing happens! The cursor changes to a hourglass for a second and no window pops up. I've recently upgraded from 7.0 to 8.0 but that shouldn't make a difference, and even when I tried creating a new VI, and a new DAQ assistant express VI it won't work on this either. I've tried looking at security settings etc. but no joy. Any ideas?

I would try uninstalling DAQ and reinstall. Not scientific but in most cases will fix the issue of the DAQ assistant.
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

I have an iP4500, which I assume is quite similar to your model.
I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
Plug the printer into the USB port on the Express and restart the printer.
Open System Preferences (gear icon on the dock) and then open Print and Fax
Right-Click in the printer area on the left and select Reset Printing System
Then click the + (plus) button at the bottom of the printer list to install the printer again.

Video Express won't run

I installed Adobe Presenter 10 and Video Express on my Windows 7 PC with Microsoft Office 2013. The Adobe Presenter add-in works fine, but video express won't run either through PowerPoint or on its own. Why will the program not even open? All it says is Adobe Presenter has stopped working when I try to run the Video Express.

I cannot get Video express to work on 2 recent Presenter installations for faculty. I have never had this problem before. The video driver has been updated.
Issues:
In Video Express, under Preferences, I cannot switch to the Project View. The option is grayed out.
When trying to create a video from within PowerPoint, I get the following messages.
On one faculty computer we were able to record from Video Express directly, but not from within PowerPoint. On the other PC we cannot use Video Express at all although the Presenter application in PowerPoint seems to be working.
Please advise on a solution.

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

HP Pavilion 23t AIO PC won't run Battlefield smoothly

My father bought me the Pavilion 23t AIO, thinking that it would be a good gaming computer, but upon me testing my game Battlefield 3 with the normal graphics and settings, and the game was incredibly laggy. I changed the settings to the lowest, and the game still won't run completely smoothly, and twice it closed itself out on me. I'm wondering if I need a new graphics card or not, please respond quickly!!
This question was solved.
View Solution.

SniperProffesor, welcome to the forum.
The good news is, you have very nice computer. The bad news is, it is not good for gaming. The video card slot is MXM (One PCI Express MXM slot that supports a PCI Express x16 graphics card (Generation 2 speed). Here are the specs on it:
One Mobile PCI Express Module (MXM) socket
MXM 3.0 version: Type A
<35W
It is difficult to find these video cards because they are usually sold as OEM components. Your best bet would be to shop ebay for one. I am not certain that this card would even make your gaming experience better.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Add-on won't run on some clients

As soon as an add-on users de DI SDK, it crashes at startup on some systems and I don't know why.
I'm using the DI Basic Operations example that came with the SDK. I build it, and used the SAP B1 SDK setup .NET Wizard to create the installer and licence file. The istallation goes fine, but the addon itself crashes. with a useless "the program has performed an illegal operation and will be shut down" error message (see below)
I also tried other ways to run the add-on (among others directly from visual studio or from the command line, with the developer licence number as argument) but allways with the same result. At one system all goes well, at the other a crash occurs even before the debugging can start.
I have no idea what this error message is trying to tell me:
System.Runtime.InteropServices.COMException (0x80040154): COM object with CLSID {A355004F-AAB4-41D3-BDE0-7EAED1ED5FFF} is either not valid or not registered.
   at Project1.BasicOperations.InitializeCompany()
   at Project1.BasicOperations.BasicOperations_Load(Object eventSender, EventArgs eventArgs)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Most of the time however, I get a much less helpfull error saying there was some unidentified illegal operation.
Something that is possibly related is a problem with the references. On a PC where the add-on crashes I don't have the SAP DI as reference in the .NET and COM tabs, only the SAP UI. When I open an example the DI reference is reporting an error (not found) , but when I add the reference as a file, all is well. (The project now compiles with no errors or warnings, it still crashes when I start it.
The problem already occured when only SBO was installed (which should be sufficient to run the add-on? You don't need to have the SDK installed I presume). I installed the SDK and later even Visual Studio, but this didn't help.
I've reinstalled SBO several times (I even deleted the sbo program files directory before installing SBO again) but this didn't change anything.
(I'm using 2004a)
Does anyone know what could cause this problem?

I know that, but that didn't help.
Is there any way to find out which versions of the DI API a SBO client is currently using?
We've re-installed the clients and DI API using the shared folder on the server, but that didn't help. (maybe some old dll was locked and couldn't be removed (without any notice of that happening) and is still being used?)
One system indeed didn't have the DI API installed and the problem was solved a bit (my own plug-in now works fine, but the "DI basic operations" example of the SDK crashes when connecting to a company database.)
We've now got 3 machines running my add-on without any problems (the server and 2 notebooks) and 1 notebook who won't run my add-on at all.
The DI basic operations Example of the SDK won't run on any of the notebooks, only on the server.
On one notebook it crashes when I click "choose company DB" (which should give me a list of available companies) on the other notebook it crashes when I try to connect to a (any) specific company database and on the third notebook it gives an empty list and won't connect to anything (but doesn't crahs)
this is all 100% reproducable.
All machines run the SBO client and UI add-ons perfectly, only the DI seems to cause problems.
another weird problem that might be related, is that I need to compile my add-on as "debug". When I compile it as "release", it won't run on any of the notebooks, only on the server.

I could not configure a DAQ assitant for any channel

In the wizard after selecting the voltage input i am not able proceed forward i.e i could not find any channels to select in Mychannelsbox,so can any one tell me what should i do and what all the software i need to install to use DAQ.i have complete labview development suite version 7.0 ,i hope to get reply as early as possible,bharat

What version of NI-DAQ are you running? What DAQ card do you have? If you do not have a DAQ card installed, you will be able to start the DAQ Assistant but not complete it since you have no available channels (no card installed).
If you do have a DAQ card installed, is it functioning in MAX? Can you run a test panel on it?

What won't run in Rosetta?

Hi,
What type of Apps will not run in Rosetta?
Michael

For one, Apple's own Pro software will not run on these computers, despite the fact that they are using Final Cut Pro as a benchmark on the iMac/MacBook product pages. Final Cut Pro or Express, DVD Studio Pro, Logic, Logic Express, Aperture... you'll have to wait until the Universal Binaries come out (supposedly in March), and then you'll have to pay to "upgrade."
I can't believe they are using benchmarks from pieces of software that won't run on these machines (yet) to sell them. Someone who didn't do his research would think these machines would be great for Final Cut, only to find out they don't run them, period.

How do I install the FM10 licensing fix when Adobe Update Installer won't run?

Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
    down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
    This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
   of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
    This creates a new levels adjustment layer using the selection loaded from
    the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER

CS2 won't run

CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?

I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
A drive change could trigger the need for reactivation. Did you tell them that you're running from a mirrored drive?
It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
But unfortunately if you can't get them to adjust their database you're out of luck.
-Noel

DAQ Assitant Express VI Wizard won't run if not administrator

Similar Messages

Maybe you are looking for