DAQEvent=2 not fired when double buffered operations stop

Hi,
I am using Config_DAQ_Event_Message with DAQEvent==2 to get an event when synchronous DAQ and WFM are finished. This works fine with single buffered operation, but i get no event in double buffered mode ?
Especially I like to get an event in case of Buffer-Underrun etc. errors.
My hardware: PCI6111
Software: NIDAQ6.9.3 with VisualC++
Thanks in advance
Michael

Hi Michael,
One of the possible causes of this error-10608 is a high update rate. The update rate might be high enough that you are not allowing enough time to fill the buffer with new data. This error can also be the result of having the regeneration option, within software, set to OFF. If you turn the regeneration option to ON, the error will go away. You can also reduce the update rate to see at which point you stop getting the error -10608
I found the following links about errorcode -10843:
http://digital.ni.com/public.nsf/websearch/EC38736BBF430DDC8625677C006F395C?OpenDocument
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000CA780000&ECategory=Measurement+Hardware.Digital+I%2FO
regards
TN

Similar Messages

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Crystal Report Alerts not firing when no records are fetched from the DB

Hello,
The crystal report alert i have created in the report in the event of no records being fetched from the query is not firing. The condition used is isnull ( count(DB Field ) ).
Is there a limitation with alerts that they would be fired only when some records are fetched in the report.
Appreciate any pointers
-Jayakrishnan

hi Jayakrishnan,
as alerts require records to be returned here's what you will need to do:
1) delete your current alert
2) create a new formula with syntax like
isnull(DistinctCount ()) or DistinctCount () = 0
3) create a new Subreport (which you will put in a report header)
4) the subreport can be based off of any table
5) have the subreport record selection always return only 1 record...for performance reasons
6) change the subreport link to be based on the new formula
7) the link will be a one way link in that you will not use the "Select data in subreport based on field" option
8) now in the subreport, create the Alert based on the parameter created by the subreport link
i have tested this and it works great.
jamie

Safari 5.1 flash mouse_leave not fired when mouse button is down

Hi all, anyone know a work around for the fact that Event.MOUSE_LEAVE is not fired in Safari 5.1 (OSX 10.6.8) if the mouse button is down? I tried the latest beta player and the issue is not resolved. Thanks!

WOT alerts you to dangerous web sites.
That function is already built into Safari, and has been since version 3:
http://www.macworld.com/article/137094/2008/11/safari_safe_browsing.html
I had never heard of the WOT extension until today!
If you go to Safari Preferences/Security you will see a box marked 'Warn when visiting a fraudulent website'. That is what that is.
The blacklists from Google’s Safe Browsing Initiative (where Safari checks for 'fraudulent websites') are contained in a database cache file called SafeBrowsing.db - the file was created when you first launched Safari, and if you have the browser open, the file is modified approximately every 30 minutes.

Dragging a drawing when double-buffering

Hopefully someone out there can help me with this...
To state the situation simply, I have an applet in which I need to select, drag, and drop in order to move them around. The applet works fine right now, but I can't figure out how to add dragging. The way I have it, you click the object, drag the mouse to where you want to move it, and let go. It then dissapears from where it was, and appears where it was placed. The prolem is that I want to actively see the object being dragged....even an outline would work. As it is, it's difficult to know what you were selecting to move.
I added a mouseDragged() function to the program, but I see no evidence of it working, which I think has something to do with the double-buffering I used. As far as I can tell, it does draw the object being dragged, it just doesn't ever show up on the screen....
I would appreciate any input anyone can offer!

With double buffering
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.awt.image.BufferedImage;
public class Omove extends Frame
 BufferedImage img;
 Graphics mg;
 Vector v = new Vector();
 Mobject m;
 int iv = -1;
 int dx = -1;
 int dy = -1;
public Omove()
 addWindowListener(new WindowAdapter()
 { public void windowClosing(WindowEvent ev)
 { dispose();
 System.exit(0);}});
 setBounds(10,10,400,300);
 v.add(new Mobject(1,30,30));
 v.add(new Mobject(1,89,120));
 v.add(new Mobject(2,130,230));
 v.add(new Mobject(3,210,60));
 addMouseListener(new MouseAdapter()
 { public void mouseReleased(MouseEvent m)
 if (iv != -1) putTheObject(m.getX(),m.getY());
 addMouseMotionListener(new MouseMotionAdapter()
 { public void mouseDragged(MouseEvent m)
 if (dx == -1) findTheObject(m.getX(),m.getY());
 if (iv != -1)
 dx = m.getX();
 dy = m.getY();
 repaint();
 setVisible(true);
private void findTheObject(int x, int y)
 for (int i=0; i < v.size(); i++)
 m = (Mobject)v.get(i);
 if (x >= m.x && y >= m.y && x <= m.x+30 && y <= m.y+30)
 iv = i;
private void putTheObject(int x,int y)
 iv = -1;
 dx = -1;
public void paint(Graphics g)
 if (img == null)
 img = (BufferedImage)this.createImage(getWidth(),getHeight());
 mg = img.getGraphics();
 mg.setColor(Color.white);
 mg.fillRect(0,0,getWidth(),getHeight());
 for (int i=0; i < v.size(); i++)
 m = (Mobject)v.get(i);
 if (iv == i)
 m.x = dx;
 m.y = dy;
 m.draw(mg);
 g.drawImage(img,0,0,null);
public void update(Graphics g)
 paint(g);
public class Mobject
 int x,y,t;
public Mobject(int t, int x, int y)
 this.t = t;
 this.x = x;
 this.y = y;
public void draw(Graphics g)
 if (t == 1)
 g.setColor(Color.red);
 g.fillRect(x,y,30,30);
 if (t == 2)
 g.setColor(Color.orange);
 g.fillOval(x,y,30,30);
 if (t == 3)
 g.setColor(Color.blue);
 g.fillOval(x,y,50,30);
public static void main (String[] args)
 new Omove();
Noah

How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
'''File not found '''
Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
* Check the file name for capitalization or other typing errors.
* Check to see if the file was moved, renamed or deleted.
TRY AGAIN.
<nowiki>****************************************************</nowiki> 
This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
[EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

Thank you for your response, Cor-el.
I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

Installer for Adobe AIR does not respond when double-clicked?

I tried to install Adobe AIR on my laptop (WinXP Professional, SP3), but the link at http://get.adobe.com/air/ didn't work - website said 'downloading' and to click OK when prompted, but I never got prompted.
So I found an alternate site, downloaded the installer and double clicked to run it. Nothing happened. So I tried a couple more times before checking my Task Manager.
Under 'Processes', there were several instances of the Adobe Air Installer.exe running, but nothing was happening that I could see!
I'm not sure if it's a conflict with any other software or insufficient system requirements, but I'm pretty sure I'm not doing anything wrongly, cos I managed to successfully install Adobe AIR on another laptop I have, also running WinXP, and got Tweetdeck to work on it.
Would appreciate any help on this matter from the more enlightened.
Thanks in advance!

Are you sure that you don't have Private Browsing enabled when Firefox is opened? 
Tools > Options > Privacy = '''Automatically start Firefox in a private browsing session'''
With that setting selected there is no (Private Browsing) showing in the Title bar.

"File not found" when double clicking an .ai or .eps file

Hello.
I have Adobe DesignWebPremium_CS6_LS6 ME.
When I double click an illustrator fornat file (.ai .eps .pdf) or right click and open with illustrator - I get the following error: "File not found".
I tried to uninstall and install again - but it's still has this bug.

lee gal,
Presuming nothing is wrong with the file(s) you try (can you open it/them in Acrobat/Reader?), you may try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Why is this table trigger not firing when insert/update from servlet?

Hi!
I have this servlet that parses XML and stores values into Oracle tables. I have created a table trigger so that when one table is updated, a trigger is fired and the current system date is store in another table's field.
I have tested the trigger in Toad and it works, that is, if I update the table that the trigger is set to, the SYSDATE is stored as intended.
Here is the trigger's code:
DECLARE
tmpVar NUMBER;
NAME: transaction_time
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 9/14/2007 1. Created this trigger.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: transaction_time
Sysdate: 9/14/2007
Date and Time: 9/14/2007, 8:00:42 AM, and 9/14/2007 8:00:42 AM
Username: (set in TOAD Options, Proc Templates)
Table Name: MS_RESLIMITS (set in the "New PL/SQL Object" dialog)
Trigger Options: (set in the "New PL/SQL Object" dialog)
BEGIN
tmpVar := 0;
UPDATE MS_Misc SET mi_lastrun = SYSDATE;
EXCEPTION
WHEN OTHERS THEN
-- Consider logging the error and then re-raise
RAISE;
END transaction_time;
Now, when the table is updated by the servlet, the trigger does not fire. And here is the code from the servlet:
--- <start of code> ---
boolean recordExists =
this.isRecordPresent("MS_ResLimits", "rl_compcode",
compCode, url);
Connection rlConn = null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
rlConn = DriverManager.getConnection(url, dbUser,
dbPwd);
Statement stmt = rlConn.createStatement();
PreparedStatement xmlUpdate = null;
if (recordExists) {
xmlUpdate =
rlConn.prepareStatement("UPDATE MS_ResLimits SET rl_compcode = ?, rl_maxreslimit= ? WHERE rl_compcode =?");
xmlUpdate.setString(1, compCode);
xmlUpdate.setString(2, maximumReservationDate);
xmlUpdate.setString(3, compCode);
} else {
xmlUpdate =
rlConn.prepareStatement("INSERT INTO MS_ResLimits VALUES(?,?)");
xmlUpdate.setString(1, compCode);
xmlUpdate.setString(2, maximumReservationDate);
} //end-if-else
int n = xmlUpdate.executeUpdate();
rlConn.commit();
} catch (Exception ex) {
out.println(ex.toString() +
"-> error inserting Max Reservation Date ");
} finally {
if (rlConn != null) {
rlConn.close();
} //end-try-catch-finally
--- <end of code> ---
What causes the trigger to fire? the commit? My understanding is that executeUpdates are in autocommit mode by default, or am I mistaken? Do I have to programmatically send something to the DB so that the trigger fires?
BTW, I'm using JDeveloper 10.1.3.3.0. The project is being compiled with Java 1.5.0_06. The servlet is running in OCJ4 standalone. DB is 10g (don't know the release version).
...and, for some reason this message is not keeping format from my edit window to the post...
Thx!
Message was edited by:
delphosbean
Message was edited by:
delphosbean
Message was edited by:
delphosbean

You are supposed to be able to preserve you formatting using the <pre></pre> tags but I can't get this to work either 
 
Patrick.

Still not understanding Swing Double buffering

I'm writing a custom JComponent like
class Custom extends JComponent {
protected void paintComponent(Graphics g) {
       //slow complex routine
}As the display does not often change I thought I could improve performance with my own off-screen rendering
class Custom extends JComponent {
private Image screenImage= null;
private void doOffscreen() {
            BufferedImage backimage = defaultgc.createCompatibleImage(getSize().width, getSize().height);
            final Graphics2D g2 = backimage.createGraphics();
             slow complex routine
            screenimage = backimage;
protected void paintComponent(Graphics g) {
       super.paintComponent(g);
       if (screenimage != null) {
            g.drawImage(screenimage, 0, 0, null);
}What does adding
class Custom extends JComponent {
       public Custom() {
            setDoubleBuffering(true);
}get me ? Or can I use the SWING double buffer to render to ?
I'm guessing what it will do is render my screen image into yet another image and then switch this in.
I feel I'm missing something :(

I've run your code and it seems to work well,
however it is in constant update mode where as my application usually only changes as a part of user interactionActually, that doesn't matter, since when you want the screen to update, you just call "repaint()" from any place that has visibility in your application. The real wonderful thing about offscreen rendering is: that when you have to have an update done, it paints immediately is a very optimized code--a one line paint/paintComponent routine, since the image is pre-rendered, no waiting.
The offscreen rendering approach lends very well to animation loops, adhoc graphic updates, and pretty much any other animation schemes I've been able to come up with.
There is really only one concern that I have in offscreen renderings: it is possible that you would be able to catch the offscreen image being rendered so only a partial image would be present on the screen. I cannot make it do this so I can notice it happen in any animation loop or continuous update scenario that I've been able to test.
I can force it to happen noticeably in code if I purposefully artificially extend the animation times far beyond what they may normally take and unreasonably make multiple tick cycles to the animation and update delays. This is like running a film in ultra slow motion--frame by frame, but under normal conditions (full speed animations), I cannot force any noticeable flaw in the output of an offscreen rendering scheme.
I've pumped that program that I posted up to 10,000 objects and it still ran--no flicker what so ever, but yes, it was a little jerky since I'm doing 1600x1200 and 10,000 images on a 2.4 GHz AMD under Solaris x64, but at the 1,000 object mark as posted, it works fine.

When validate item not firing when exit with mouse

Hi
I have a when validate item tirgger on an item.
it fires fine when I use tab from keyboard after validating
but when i navigate to another field with the mouse, the trigger does not fire.
it only fires when i try to close the window..
how can i overcome this?
thanks

Normally, a WVI trigger ALWAYS runs when you leave a field no matter how you leave it (after you have entered something, of course). If it is not running, then you should check whether you have messed around with Set_Form_Property and Validation_Unit.
Or maybe you have some code in your key-next-item trigger that runs that makes you think it is the when-validate-item trigger.

Dynamic Actions not firing when using date picker?

The dynamic actions don't seem to be triggering when selecting a date from the date picker, but trigger just fine when the dates are manually entered. Anyone else have this problem and if so is there a workaround to get it to work from the date picker as well? I am using Application Express 4.0.1.00.03
And how can I report this problem?

I'm already using Change.
If it matters, I have it set to:
Event: Select
Selection Type: Item
Condition: No Condition
My action type is just an alert right now since all I want to do is to see if I can trigger it (as in you have to walk before you can run).
Event Scope: Live
Conditon type: Dynamic Action not Conditional
Authorization Scheme: No Authorization Required

Air 3.4 iOS Push Notification is not fired when app is not running and is not in background

Hello,
I'm making an Air iOS application which uses the iOS Push Notification from Air 3.4.
All is working perfectly except when I receive notifications when the app is not running and is not in background (The app is killed).
I suppose the RemoteNotificationEvent.NOTIFICATION must be dispatched when I receive a notification even if my app is not currently running or in background ?
Do you have already get the same issue ? Do you know what can prevent the notification to be handled ?
Thanks,
Loïc

issue has been fixed in the build available at http://labs.adobe.com/downloads/air3-5.html.
You would now have to attach listener to InvokeEvent. For cases, when application is killed, InvokeEventReason will be InvokeEventReason.NOTIFICATION. The notification payload can be accessed by the following code
protected function onInvokeEvent(event:InvokeEvent):void
     trace("Invokehandler called .... \n");
     trace("reason: " + event.reason + "\n");
     if( event.reason == InvokeEventReason.NOTIFICATION)
                    var payload:Object = Object(event.arguments[0]);
          for (var i:String in payload)
                trace("Key:value pair " + i + ":" + payload[i] + "\n");
          // TODO: DO THE NEEDFUL ON RECIEVING A NOTIFICATION HERE

MDB is not fired when message in Topic

Hi,
 Weblogic 7.0.2.0
 remote Weblogic 7.0.2.0
 I have a MDB that is listening to a remote topic.
 The deployment is ok, and when I monitor the MDB in the weblogic console
 the connection Alive is true, so is connecting and listening to the
 remote Topic.
 The problem I am having is that when the remote Topic receives a message
 the MDB's onMessage method is not called.
 I would appreciate any help on this.
 Publius


It is pretty likely there is some basic misconfiguration. As I wrote
 earlier, if there are no problems in the log file, please post
 your config.xml and MDB descriptor xml files and I (or someone)
 will take a look.
 Tom
 Ruowei Wu wrote:
 > The log file is fine until the message is published, which means the onMessage()
 > in MDB doesn't receive anything, but publish doesn't have any exception.
 >
 >
 > Tom Barnes <[email protected]> wrote:
 >
 >>The same advice applies. The first place to look is in your log files.
 >>
 >>Ruowei Wu wrote:
 >>
 >>>we have exactly same problem, message post is fine, but MDB doesn't
 >>
 >>receive anything,
 >>
 >>>looks like mdb container doesn't deliver.
 >>>
 >>>
 >>>Tom Barnes <[email protected]> wrote:
 >>>
 >>>
 >>>>Check for warnings and error messages in your log, as an MDB can
 >>>>still deploy successfully even if it fails to create its JMS connection.
 >>>>The MDB container will just keep retrying to connect.
 >>>>
 >>>>If this doesn't help, please post your MDB descriptor files and
 >>>>I'll take a look.
 >>>>
 >>>>Tom, BEA
 >>>>
 >>>>Publius Ismanescu wrote:
 >>>>
 >>>>
 >>>>>Hi,
 >>>>>
 >>>>>
 >>>>>Weblogic 7.0.2.0
 >>>>>remote Weblogic 7.0.2.0
 >>>>>
 >>>>>
 >>>>>I have a MDB that is listening to a remote topic.
 >>>>>The deployment is ok, and when I monitor the MDB in the weblogic console
 >>>>
 >>>>>the connection Alive is true, so is connecting and listening to the
 >>>>
 >>>>>remote Topic.
 >>>>>
 >>>>>The problem I am having is that when the remote Topic receives a message
 >>>>
 >>>>>the MDB's onMessage method is not called.
 >>>>>
 >>>>>I would appreciate any help on this.
 >>>>>
 >>>>>Publius
 >>>>>
 >>>>
 >

ValueChangeListener not firing when iterator set to refresh=never

I have an iterator that I have recently added a child node to. This child node is tied to a view object without a backing entity. The fields in that view can contain user supplied data that I persist through a stored procedure. This mechanism works great accept when the page is refreshed. When that happens the fields in the child node are lost due to the view being reexecuted.
To fix this problem, I thought I could set the iterator to refresh=”never” and then programmatically refresh it when I need to. This solution appears to work but with one small problem, a valueChangeListener in one of the parent iterator fields fails to execute when it is supposed to.
It is very weird. I can remove the refresh=”never” from the iterator and the valueChangeListener functions properly, but if I add it back, it fails to get called. I have compared the html source on the browser and the element is generated the same in both instances, so it is definitely some issue on the server side.
Anyone ever run into a similar problem?
<af:table rows="#{bindings.ItemCountrySystemsVO.rangeSize}"
 emptyText="#{bindings.ItemCountrySystemsVO.viewable ? \'No rows yet.\' : \'Access Denied.\'}"
 var="row"
 value="#{bindings.ItemCountrySystemsVO.treeModel}">
 <af:selectBooleanCheckbox id="selectDesc"
 value="#{row.CheckBox}"
 autoSubmit="true"
 immediate="true"
 valueChangeListener="#{itemItemCountryDataActionBean.onChangeSystemDescCheckBox}" />
<iterator id="ItemCountrySystemsVOIterator" RangeSize="10"
 Binds="ItemCountrySystemsVO" DataControl="RMSItemAMDataControl" Refresh="never"/>
<tree id="ItemCountrySystemsVO" IterBinding="ItemCountrySystemsVOIterator">
 <AttrNames>
 <Item Value="Item"/>
 <Item Value="CountryId"/>
 <Item Value="SystemCd"/>
 <Item Value="Status"/>
 <Item Value="StatusDate"/>
 <Item Value="PrimarySupp"/>
 <Item Value="CheckBox"/>
 </AttrNames>
 <nodeDefinition DefName="od.adf.mp.datamodel.views.item.ItemCountrySystemsVO"
 id="ItemCountrySystemsVONode">
 <AttrNames>
 <Item Value="Item"/>
 <Item Value="CountryId"/>
 <Item Value="SystemCd"/>
 <Item Value="Status"/>
 <Item Value="StatusDate"/>
 <Item Value="PrimarySupp"/>
 <Item Value="CheckBox"/>
 </AttrNames>
 <Accessors>
 <Item Value="ItemCountrySystemsLangVO"/>
 </Accessors>
 </nodeDefinition>
 <nodeDefinition DefName="od.adf.mp.datamodel.views.item.ItemCountrySystemsLangVO"
 id="ItemCountrySystemsLangVONode">
 <AttrNames>
 <Item Value="Item"/>
 <Item Value="System"/>
 <Item Value="Lang"/>
 <Item Value="LangDescription"/>
 <Item Value="CountryId"/>
 <Item Value="ItemDescription"/>
 <Item Value="OrigItemDescription"/>
 </AttrNames>
 </nodeDefinition>
 </tree>

Using the refresh condition was definitely the better approach and it worked great. Unfortunately not refreshing the parent iterator did not prevent the reexecuting of the child node. I am at a loss on how to prevent this from happening. I am at a loss to explain why the reexecuting of the child view object happens at all when the parent hasn't changed.
Any help is appreciated.

DAQEvent=2 not fired when double buffered operations stop

Similar Messages

Maybe you are looking for