Darwin.cli : Most of the cli commands are not available

Most of the command lines in 6.1 does not work in vcloud application director 6.1 for example
list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> create-cloud-tunnel
Command 'create-cloud-tunnel' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> cliversion
vCloud Automation Center Application Services CLI BUILD 6.1.0-2064245
Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by U.S.
and international copyright and intellectual property laws.
VMware products are covered by one or more patents listed at http://www.vmware.com/go/patents
spring> display-user
Command 'display-user' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring> list-cloud-tunnels
Command 'list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn about this command)
spring>

Thanks for your reply, i used the below command but not enough luck
login --serverUrl https://************:8443/darwin --username admin --password ********** --tenantId gis
According to the documentation here vCloud Application Director 6.0 Documentation Center admin has ROLE_SYSTEM_ADMIN,ROLE_CLOUD_ADMIN,ROLE_CATALOG_ADMIN,ROLE_APP_ARCHITECT,ROLE_DEPLOYER,ROLE_SYSTEM_INTEGRATOR permissions hence i was logging in as admin.
Thanks
Nataraj

Similar Messages

I have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?

From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference.

I am trying to create mobile pages using the steps file new new document page from sample mobile starters jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I

I am trying to create mobile pages using the steps file>new>new document>page from sample>mobile starters>jquery mobile (cdn). When "page from sample" is selected, the subsequent options are not available. This seems like a silly question, but how do I acquire these options?

You can get the latest jQuery Mobile Themes directly from jQuery Mobile's web site.
https://demos.jquerymobile.com/1.1.0/docs/api/themes.html
Or roll your own with ThemeRoller
http://themeroller.jquerymobile.com/
Nancy O.

Why netflow commands are not available in 4506-E?

Hi,
we have one 4506-E Chassis , Sup7L-E , LAN Base with cat4500e-universalk.SPA.03.03.00.SG.151-1.SG.bin image
why netflow commands are not available not available in this. someone said netflow will work only with IP base License , is that right?
Or how to enable it
thanks
Sujish

Hi,
For Nwtflow, you need IP Base or Enterprise Services License.
See table-1 in this link;
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/OL_26675-01.pdf
HTH

Photoshop CC OSX 10.6.8 Patterns in the Patterns folder are not available from the fill menu? Any help would be appreciated.

Patterns which do appear in the Adobe Photoshop CC, Preset, Patterns folder are not available as a "Fill" option.
Any help would be appreciated.

Have you repaired the disk permissions?
You might also try resetting the photoshop cc preferences by:
Press and hold the Shift+Command+Option keys while starting photoshop cc
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes because you do.

Office 2013 : Ribbon some commands are not available

hi,
Sometimes, in excel or others applications, we have some issues regarding ribbon : commands are not functional !
We must close office applications to get back to a normal state.
We did a migration from Office 2007 to Office 2013.
best regards

Hi,
First, please make sure your Office program is fully patched.
If you installed any third-part program that is integrated to Microsoft Office, please temporarily disable the integration to check the result. Also try to disable all add-ins in Office programs to check the result.
In addition, please try to run a repair of your Office installation and then test the issue again:
http://office.microsoft.com/en-in/project-help/repair-office-programs-HA010357402.aspx
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

I just purchased a mac mini and wondered if it's safe to download the Kobo reader app. can I download things from the internet that are not available in the apple store?

I just purchased a mac mini and wondered if it's safe to download from the internet (such as Kobo) that are not available on the app store. It asked me if I was sure it was safe, so it's got me worried.

If you know the sites are OK, then download away.

Trying to make a disc.img from an iMovie project get the mssage that some of the audio clips are not available. The clips still show as green bars in the project but do not play.

I successfully made a disc.img and then burned a DVD of the project but found an error in a title. Went back to the project, corrected the error, and tried to create a new disc.img but got the message that some of the audio tracks were unavailable. They still show as green bars in the project but do not play. Tried deleting and reinstalling them with no success. They do play in iTunes and in the iMovie editing pane
Thank you

inspired2apathy wrote:
... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
... What am I missing?THE BASICS. See if this isn't what you are trying to do.
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class Test
public static void main(String[] args) {
    JTextArea ta = new JTextArea();
    ta.setLineWrap(true);
    ta.setWrapStyleWord(true);
    JScrollPane sp = new JScrollPane(ta);
    JFrame f = new JFrame();
    f.getContentPane().add(sp, "Center");
    f.setBounds(0, 0, 400, 300);
    f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
    f.setVisible(true);
}OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly.

The following domains are not available.

I've ran into this problem a few times. We have two separate forests with a two-way trust. We have a clustered file server that both forests access.
Randomly I will notice the file server has some issues resolving the names (showing the SID instead) and I can't modify permissions because it prompts this message:
The domain resolves fine from both sides (I have DNS forwarders in each location in place). When I go to domains & trusts on both domain controllers and "VALIDATE" it says everything is fine.
How do I troubleshoot this?

Glad to hear this!
Frank
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I am unable to make an outline from a blank page. The option to choose the outline from the icon on the top of page and the view tab are not available to me.

I just started using Pages and when I try to make an outline from a new blank page I am unable to choose it from the toolbar or the view tab. Please help. Thanks!

drakanamor,
It's possible that you have strayed into the Page Layout section of the Pages templates. Page Layout templates have no Text layer, or frame, in which to show the outline view, so the option is unavaiable.
Choose one of the Word Processing Templates.
Jerry

Entries in rsrd_log are not available in sm37

Hi all,
I have some "yellow" logs for sending workbooks in the rsrd_log with the message User cannot be used for background processing. But now the user can be used.......
Now I want to repeat scheduling in the sm37, but the "yellow" jobs are not available.
I hope you can help me
Kind regards
Peter

Hi,
Pls refer the below links.
http://www.tnsr.eu/fileadmin/user_upload/Documenten/PDF/How_To/How_To...Troubleshoot_Information_Broadcasting.pdf
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00738f64-ff95-2b10-0eb1-dfe8859e5bf5
Hope it helps you,
Regards,
Ravindra.

Ibooks top sellers & other books are not available for us to purchase in India.

Top seeling ibooks & other books within the ibooks store are not available for purchase in India except for some free classics.
When will the topselleing books within ibooks store be available for us to purchase?

No-one knows. It depends on when Apple decide to open an iBookstore for India.
In the mean time, you could create an Apple ID in the US store without a credit card and use iTunes gift cards to buy things. Gift cards are available on eBay. (I have never done this, but heard a number of reports from people who have and were happy with this approach.)
Michi.

Some Apps are not available yet.

Majority of the important apps are not available yet for Q5. Any updates on when this will be available. Like Viber and WeChat. WeChat is already available and it says that it's compatible with OS 10 but why is it unavailable for the Q5 in specific? Isn't Q5 running on OS10 too!?

Hi and Welcome to the Community!
App compatibility is the same as it has always been for BBs. All apps must be specifically ported to the exact device model number AND major OS level in order to function. That means a lot of porting for the developers, and sometimes they choose to not do so. An app that functions on Z10, for example, will not function on the Q5 unless the developer specifically ports the app for the Q5 (and pushes it correctly out via BBWorld).
Likewise, it's up to those app developers to choose what platforms they desire to support. If they do not support a platform that you desire, your channel to push for it is with the developer directly, contact information for which can normally be obtained in the BBWorld catalog.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"following domains are not available" error - functionally trusted domains but with same NETBIOS dc computernames giving problems.

For SCOM monitoring and user permissions I am trying to add the Action Account from HQ.local domain to some other domains like DOMAIN1.local, TEST1.local and TEST2.local.
(a trust persists between the domains en HQ.local, and DNS Conditional forwarders are configured to correctly resolve the FQDN DNS names).
Problem is, when adding a user from the HQ.local domain to the Active Directory of the DC's SRVPDC01.DOMAIN1.local or SRVPDC01.TEST1.local domain I get an error:
"The Active Directory Domain Controllers Required to find the selected objects in the following domains are not available:
HQ.local
Ensure the Active Directory Domain Controllers are available, and try to select the objects again."
But when I try to do the same thing, so add user1 from HQ.local to the AD on TESTDC01.TEST2.local…. No error!
The other way around, like adding users from DOMAIN1.local, TEST1.local or TEST2.local to the DC01.HQ.local Active directory… also no error!
To make things even more strange, when I validate the trust with HQ.local… and then try to add user1.HQ.local -> No problem, but only for about 1 minute.. After that
it doesn't recognize user1.HQ.local and only displays some CN=S-1-5... ID of the user. Also when trying to add a new user, I receive the error again.
My guess is that the problem has something to do with the same NETBIOS names of the DC's (server 3 and 4). because authenticating users from HQ.local and TEST2.local
doesn't give me errors and all other domains which have same DC names are giving errors.
(for testing purposes I set-up TESTDC01.TEST2.local with a different DC servername to see if the error persists, and it didn't).
Overview of the servers and situation:
- All server 3, 4 and 5 are on separate Vlan's and have no connectivity among each other. But they do have connectivity to the internet, the HQ.local domain and its servers
DC01 and DC02.
- same firewall settings for each vlan
- even Server 4 and server 5 are on the same Vlan for testing purposes, just to make sure the firewall is not the problem.
Server no.
DC FQDN name
Domain DNS name
1
DC01.HQ.local
HQ.local
2
DC02.HQ.local
HQ.local (secondary DNS)
3
SRVPDC01.DOMAIN1.local
DOMAIN1.local
4
SRVPDC01.TEST1.local
TEST1.local
5
TESTDC01.TEST2.local
TEST2.local
Two-Way Forest Trusts are configured without any problems but here's an overview when the error occurs.
On SRVPDC01.DOMAIN1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.DOMAIN1.local to the AD = no problem.
On SRVPDC01.TEST1.local -> adding user1.HQ.local to the AD =
error
On DC01.HQ.local -> adding user1.TEST1.local to the AD = no problem.
On TESTDC01.TEST2.local -> adding user1.HQ.local to the AD = no problem.
On DC01.HQ.local -> adding user1.TEST2.local to the AD = no problem.
What are my options to fix this? There must be more possibilities than renaming the DC names.
And why does the problem only occur when adding users in Foreign domain ->from-> HQ.local and not HQ.local ->from-> Foreign domain. Because that's the only
thing I really need: users from HQ.local having permissions in groups of the other domains… :(
Any advise or help would be much appreciated. I've been struggeling with this for a while now and i'm pretty much out of ideas.

Hi aperelli,
On srvpdc01.DOMAIN1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
    timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On srvpdc01.TEST1.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.hq.local
Result:
C:\Windows\system32>nslookup
DNS request timed out.
    timeout was 2 seconds.
Default Server: UnKnown
Address: ::1
> set type=all
> _ldap._TCP.DC._msdcs.HQ.local
Server: UnKnown
Address: ::1
Non-authoritative answer:
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc01.hq.local
_ldap._TCP.DC._msdcs.HQ.local SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = dc02.hq.local
dc01.hq.local internet address = 192.168.1.200
dc02.hq.local internet address = 192.168.1.201
=======================
On DC01.HQ.local
nslookup
set type=all
_ldap._tcp.dc._msdcs.domain1.local
Result:
C:\Windows\system32>nslookup
Default Server: dc01.hq.local
Address: 192.168.1.200
> set type=all
> _ldap._tcp.dc._msdcs.domain1.local
Server: dc01.hq.local
Address: 192.168.1.200
Non-authoritative answer:
_ldap._tcp.dc._msdcs.domain1.local      SRV service location:
          priority       = 0
          weight         = 100
          port           = 389
          svr hostname   = srvpdc01.domain1.local
srvpdc01.domain1.local     internet address = 10.0.113.150
=======================
I have tested port 3268 and 3269 with Port Query UI and ports are listening on alle DC servers.

I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

Downloading past purchases from the App Store, iBookstore, and iTunes Store
iOS- How to transfer or sync content to your computer
iTunes Store- Transferring purchases from your iOS device or iPod to a computer
If you have non-purchased content then you need to use third-party software to transfer it to your iTunes Library - Phone to Mac - Pod to Mac.

Darwin.cli : Most of the cli commands are not available

Similar Messages

Maybe you are looking for