Dashboard data not visible for the users - buffer issue?

It occurred several times last weeks that some out of 7 dashboards are not visible to the Dashboard users.
The scenario is the same all the time: users fills in the data, reviews it and posts some comments. Next morning the user canu2019t see the data in the system.
What can be the problem?

Hi,
IF your Company has NEtweaver License and the SAPNET User has access right to download section, you must be able to add SP Stacks to Download Basket.
If you have license and use have access, then please contact with local SAP Subsdiary for this problem.
But to be able to download some patches, you must have Solution Manager & Maintanance Optimizer to approve the items in basket.

Similar Messages

  • SAP RM: How can I create a Node when the node is not visible for the user

    Hi,
    Product: SAP records Management for Public Sector
    Version: 7.00
    is it possible to create a instance node when the model not is not visible for the active user?
    I looked in the CL_SRM_XML_REC_MODEL but every methode I used gave me no results with the special user.
    Regards and thanks for every beginning
    Fanninger Thomas

    Hi,
    here an example.
    When I use the method CL_SRM_XML_REC_INSTANCE->IF_SRM_XML_POID~GET_ALL( POID_TAB COUNT_USER_REST COUNT_POID_AUTH ).
    When I used the user with no right for viewing the invisible nodes I get no elements in the tabelle POID_TAB and 38 in the value COUNT_USER_REST.
    So did any one know a solution you can I create a nodes and change the restriction for the new node with the normal user?
    Regards
    Fanninger Thomas
    Edited by: Thomas Fanninger on Feb 5, 2008 8:15 AM

  • Transported Roles not Visible for the User Log-in

    I have three roles in the development system.  These roles show up in the top level navigation for the users in the dev system.  All these roles and the underlying BSPs are transported to QA successfully.  I could assign them to users without any problems, but when the users log-in they can not see any of these roles at the top level navigation (In fact, they just get a blank screen).  "Entry Point" setting and "Sort Priority" is maintained for all the three roles.
    As a test, I created a new role with the same BSP links in QA itself and assigned it to the users.  This shows up in the top level navigation for the users.  I am wondering what's wrong with the transported roles!  If someone could help me here that would be great and I will assign points to helpful replies.  I have a very basic knowledge in portal.

    After applying SP12 in the portal landscape (EP 6.0), the role transports only work in our test environment, but not in production.  Even the manual corrections suggested in OSS note 1002832 didn't help.  I can preview all the iviews in the roles with my user id (admin id), but as soon as I log-in with the end user id nothing shows up [Not even the top level navigation tabs show up].  The following is the portal authorization methodology I chose.
    1. I assign users to the user groups
    2. I assign user groups to the roles
    I want to emphasize that all is well in our test environment, it is the production environment that shows inconsistency.  Let me know if anyone has any pointers.

  • Services for object box not visible for some users

    Dear All,
    PM module experts please help. In equipment master transaction IE02  in left hand top corner we get  box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem  is it is  not visible for some users.  Our security/authorisation team has also done some check but didn't get any solution.
    anybody knows the reason why there is no box availabe?
    Thanks
    SR

    Dear Siddhartho Raha
    I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
    note are like this way 492331,this is not related to your query but same like it is and also may be
    Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
    Hope this may helps you
    Prem.

  • JComboBox - Bottom border is not visible for the first time

    JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    This happens because the list when dropped down goes out of the frame.
    If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
    I am using jdk1.3.1_02.
    Any Help would be great.
    Please find the code below.
    Thanks,
    Sridhar.
    //file: Lister.java
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Lister {
        public static void main(String[] args) {
            JFrame frame = new JFrame("Lister v1.0");
            // create a combo box
            String [] items = { "uno", "due", "tre", "quattro", "cinque",
            "sei", "sette", "otto", "nove", "deici",
            "undici", "dodici" };
            JComboBox comboBox = new JComboBox(items);
            comboBox.setEditable(true);
            // put the controls the content pane
            Container c = frame.getContentPane( );
            JPanel comboPanel = new JPanel( );
            comboPanel.add(comboBox);
            c.add(comboPanel, BorderLayout.NORTH);
            c.setBackground(Color.white);
            comboBox.setBackground(Color.white);
            comboPanel.setBackground(Color.white);
            frame.setBackground(Color.white);
            frame.setResizable(false);
            frame.setSize(200, 200);
            frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
            frame.setVisible(true);
    }

    Hello,
    try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
    Tim

  • Drop down list(JComboBox) - Bottom border is not visible for the first time

    Drop down list(Combo-box) JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
    I am using jdk1.3.1_02.
    Did any one face this issue.
    Please let me know.
    Thanks,
    Sridhar.

    I must be a little confused regarding your question.
    You can simply change your code frame.setSize(200, 200); to frame.setSize(400, 400);When you say you are unable to see the border are you specifically talking about the border of the frame or the border of the combo box?
    Lance

  • Loaded data not visible for Reporting?

    Hi all,
       In the info cube, the data is not visible for reporting, How can i make it available for reporting,
    When i select the Manage option from the context menu of the cube and select the Requests Tab, i get a pop up message that tells
    " There is an inconsistency between the load status of the data and the option of reporting on this data.
    There is data in the InfoCube/ODS object that is OK from a quality point of view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000018049, number REQU_F4ZBFRMDGBULE9WCUN3R5UX5X."
    How do i find out the inconsistancies?
    PS: All the requesta are delta upload
    Thanks n regards
    Girikumar

    Hi Girikumar
    Use the RSRV transaction and check the inconsistency of the cube ..If any inconsistency is there repair that with the repari option in the toolbar..
    Let me knwo if it not resolved..
    Bye
    Shu Moh..

  • Text not visible for the new fields created for Data Source Enhancement

    Hi .... I am working on Data Source Enhancements. I created few fields and append then to the Data SourceStructure . I also have populated the fields with data. The problem with a field is that I am not getting the text displayed in RSA3 ..Instead I am getting the field name itself.
    Example:
    FieldName       DataElement    Datatype  length  dec           Text
    ZZDOCTY                AUART         CHAR      4         0      Sales Document Type
    ZZNOODL                ZD_NODL     NUMC      1         0      Number of Deliveries
    In the above example the field ZZDOCTY is showing me the description in RSA3 i.e. Sales Document Type whereas the field ZZNOODL is not showing the text. Instead it is directly giving the fieldname ZZNOODL. Is it because of the fact that I created a Data Element for that field ??? and as I did not use the predefined data element as I did for ZZDOCTY???? Please reply me soon.....I need to display the text as "Number of Deliveries"  instead of ZZNOODL........I am working on 7.0.....

    May be the fields are hidden.
    Go to RSA6 select your data source and on the tool bar there will be a pencil butonto change. Click that and at the bottom, you will lots of check boxes.
    You go the field that you have enhanced and see whether the HIDE boxes are checked. If so, uncheck them, save and execute RSA3.
    Ravi Thothadri

  • Export to pdf not visible for some users

    Hi,
    I exported a dashboard to pdf (Xcelsius 2008, SP2), and sent it to other users.
    On my labtop the pdf works fine, but some of the users get only a blank page. They are asked if they want to run the contents of the file (so flash is working in general), but after confirming the message, the screen remains blank. The funny thing is, that these users are able to run a PPT or HTML dashboard. The problem occurs only for PDF (all of us are using Adobe Acrobat Professional 7.0).
    We already deinstalled flash player plug-ins, and re-installed the plug-ins for Adobe Flash 10, both for IE and Mozilla. (But I am still not sure which plug-in is used when running the PDF??) Any of you an idea if there is an issue with PDFs Exports? 
    Thanks a lot,
    Sonja

    THIS happens to me too, I have Xcelsius 2008, running XP. 
    My business partner and I both can view the files in PDF WORD or PPT format if we send them back and forth to edit, but as soon as we send files outside of network, the new person, running XP or Vista, can not see the content. 
    PDF, word or PPT opens, but there is no content on screen.
    What Gives?
    Scott Olson
    Texas

  • Upload multiple documents option is not visible for one user in SharePoint 2007.

    Hi,
    For one user Upload multiple documents option is not visible.
    We are using SharePoint 2007 environment.
    User is using IE 9 32 bit,Office 2010.
    I did repair office 2010.
    Active x controls are enabled.
    Please anyone help me on this.
    Thanks,
    Ashok

    Hi,
    According to your post, my understanding is that after client upgraded to Office 2013 the option for Upload multiple document was grayed out.
    I try to reproduce the issue in my environment, however everything works well.
    My configuration of system is:
    Windows 8.1;
    IE11;
    Office 2013 32bit.
    Please repair the Office 2013 to check whether it works.
    In addition, there are many thing you need to check. Please refer to:
    http://sharepointknowledgebase.blogspot.com/2013/09/upload-multiple-documents-is-disabled.html
    Here is a similar thread for your reference:
    http://social.msdn.microsoft.com/Forums/en-US/1a5af332-ed21-41ee-bf64-9122a7439623/sharepoint-not-activating-stsuplddll-upload-mutliple-documents-greyed-out?forum=sharepointgeneralprevious
    More information:
    "Upload Multiple Documents" is disabled in Document Library
    SharePoint 2010 : How to Enable Uploading Multiple Documents Functionality
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • SubArea not visible for other users in ESS

    Hi All,
    I have created a new subarea (having few services) and assigned it to a Benefits and payments Area.
    Now the issue is its only displaying to Administrator Role not for other users.
    if iam giving SAP_ALL  to other user then we are able to see this.
    Please let me know if iam missing anything .
    Thanks,
    Santosh

    to the role assigned to the user, you need to select end user visible in the role.
    note Number              939412
    ssign the following permissions to an End user.
       o  Goto Content Administrator ->Portal content ->Content Provided by
          SAP ->End User Content -> Employee Self Service
       o  Right click on  Employee Self Service. select open-> Permissions
       o  Assign read authorization to default user group "everyone".
       o  Check the 'EndUser' checkbox
       o  Save the Assigned permissions
       o  Goto System administration -> Permissions.
                                                                    Page 2
       o  Goto  Portal content ->Content Provided by SAP ->srvconfig
       o  Assign read authorization to default user group "everyone".
       o  Check the 'EndUser' checkbox
       o  Save the Assigned permissions.

  • HCM P&F - Attachment section is NOT visible for the approver

    Hi
    Attachment possible in the process but after submission (with attachment), when approver opens the process, attachment section is not visible to them. We are using FPM forms.
    Appreciate your inputs.
    Thanks

    Thanks Chris,
    let me clarify.....
    I want that when a user click on "Back to Author" button, do_operations should trigger
    Your below part is really what what I want....
    "Now if you expect that when the user clicks "back to author" that you can "catch" that in your "do operations", then that is very wrong. "Do Operations" only gets triggered by the started "check", "user_event_check" and your "user events" set up as such. Things like "back to author" or "withdraw" are handled within the application itself.You would have to modify/enhance that in order to "catch" the "back to author" button press event."
    Any help on how to achieve this functionality would be greatly appreciated.
    Chohan

  • Workbook settings macro is not visible for another user?

    Hi all,
    There is a work book with formulas inside the workbook, when execute the workbook i can see the formulas and the values derived from the excel formulas.
    But when another user is running it, he is not able to see those values,
    I think there should be some setting to be done for that user to access that workbook?
    what is that setting and how it should be done so that that user can see it?
    Thanks

    Hi all,
    When i open the work book in the design mode, i can see there are 3 text elements and one item grid,
    which is actually which was designed in the workbook, but the user is unable to see those text elements and item grid!!
    Can anyone pls help on this,
    So that the user can see this options!!
    Thanks

  • Data not adding for the same Key up in Infocube

    Hi,
    My Dataflow goes like this:  Datasource  -> DSO -> Infocube.
    I have created 2 DSO's for Deliveries Header & Delivery Item Seperately which gets data from 2LIS_11_VCHDR & 2LIS_11_VCITM Datasources.  Both DSO's have Delivery Number & Fiscal Year variant as Key.  20 records are getting loaded to each DSO's seperately.  Both the DSO's have the same Delivery Numbers & Fiscal year Variant for this 21 Records in their respective Loads as given below:
                                     DSO 1                                                                  DSO 2
    S.No.       Deliver No.    Fiscal Year Var.                          Delivery No.       Fiscal Year Var.
       1               12345                     V3                                          12345                         V3
       2               28456                      V3                                          28456                        V3
       3               34986                      V3                                          34986                        V3
    Now, I am loading data from this 2 DSO's to one Infocube, Deliveries Infocube.  The problem is, after the Data load, when i go to the Contents of the Infocube, I could see 42 records.  As per Infocube, it should add up the values for the same key.  My Delivery numbers & Fiscal year vairant are the same in both the DSO's, so i should have got only 21 records.  Why is the Infocube not adding up the records in this case, am i missing anything here?
    Thanks & Regards,
    Murali

    Hi Murali,
    As you are loading data from two different sources, there are two different requests and that is why you are getting 42 records, if you want to check the data consistency then create a query on top of this infocube and then check the values of key figures for delivery no's. or verify your data through query.
    If you don't want to create query then you can use aggregation option from the display data of Infocube.
    If you compress both the requests then you will see only 21 records in infocube.
    Regards,
    Durgesh.

  • TFS Kanban board not visible for some users

    We have TFS 2012 and some users can see the Kanban board while other users cannot see Kanban board or (Work>>
    Backlogs). We compared the permission under administrator settings and seems to be same for all users (developers group). Is there any special permission or server side permission you have to assign to see Kanban or backlogs tab?
    Any guidance or instructions would be helpful.
    Thanks,

    see my answer in
    your other posting
    Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

Maybe you are looking for