Dashboards Problem after SCOM 2012 Inplace Upgrade- Missing Stored Procedures

Dears,<o:p></o:p>
After finishing SCOM 2012 in place Upgrade I face a problem on Performance and Service level dashboards, the Upgrade has been finished successfully as shown below
But after I start Dashboards configuration I receive below errors
After troubleshooting I see an error in Event viewer beside the errors on Snapshots above said that
Fault Detail is equal to could not find stored procedure
so I compared Stored Procedures under SCOM data warehouse database with another SCOM 2012 installation (different customer) and i see a lot of Missing Stored Procedures
(all Stored Procedures start with 'SDK.Microsoft_SystemCenter_Visualization are missing)
Here i am stuck, I don’t know what I can do, I have some ideas but i don't know if its will work.<o:p></o:p>
My ideas are:<o:p></o:p>
1. Repair SCOM 2012 Installation (does the repair option will repair the databases)
2. Re import Default SCOM Management packs like (Microsoft.SystemCenter.Visualization.Library.mpb) (does MP contains Stored procedures in the Database)<o:p></o:p>
3. Install Rollup Update (may during installation it will create missing Stored Procedures)
4. Move Stored Procedures from other SCOM server installation
Please advise its strange issue
Appreciate Your help
Note:<o:p></o:p>
Everything is work correctly regarding Raising alerts , generate reports , servers state , reset and recalculate health state, installing and ininstalling agents and others.

Hi,
Could you post the error message in forum directly? This snapshot it too fuzzy to know what the exactly meaning is.
Alex Zhao
TechNet Community Support

Similar Messages

Problems getting a resultset out of a stored procedure

We're having a problem getting a resultset out of a stored procedure with JDBC. The third parameter for the procedure is an out REF CURSOR. Connection to the database is fine, we just keep getting the following error when we do the GetCursor(3) statement:
ORA-00942: table or view does not exist
We know for definate that something is coming out of the database as we can call it from ODBC without any errors. If anyone's got any ideas as to what's going wrong please let me know!
The cut-down code follows:
public class JSMatt extends HttpServlet {
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
PrintWriter out = resp.getWriter();
// Load the Oracle JDBC driver
out.println("Registering driver...");
Class.forName("oracle.jdbc.driver.OracleDriver");
// Connect to the DB
out.println("Connecting to database...");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@computer:db",
"username", "password");
// Create a statement using a stored procedure
out.println("Creating query...");
OracleCallableStatement st = (OracleCallableStatement)conn.prepareCall ("BEGIN archive.spSrchLanguage (?, ?, ?); END;");
st.registerOutParameter(3, OracleTypes.CURSOR);
st.setInt(1, 0);
st.setInt(2, 12);
st.execute();
ResultSet rs = ((OracleCallableStatement)st).getCursor(3);
null

Further study of my colleagues issue reveals that the problem only occurs where we are using a synonym for our package even though the user has permissions to run it (and indeed does when using ODBC or OLEDB).
If we call a procedure in our package which does not return a ref cursor then the procedure is getting called fine (as can be evidenced by the database inserts etc within the procedures).
Ideally we would like to use a synonym (I like to keep nice clean tidy schemas!) so if anyone knows how to get around it please let us know.
Regards
Jason.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matthew Butt ([email protected]):
We're having a problem getting a resultset out of a stored procedure with JDBC. The third parameter for the procedure is an out REF CURSOR. Connection to the database is fine, we just keep getting the following error when we do the GetCursor(3) statement:
ORA-00942: table or view does not exist
We know for definate that something is coming out of the database as we can call it from ODBC without any errors. If anyone's got any ideas as to what's going wrong please let me know!
The cut-down code follows:
public class JSMatt extends HttpServlet {
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
PrintWriter out = resp.getWriter();
// Load the Oracle JDBC driver
out.println("Registering driver...");
Class.forName("oracle.jdbc.driver.OracleDriver");
// Connect to the DB
out.println("Connecting to database...");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@computer:db",
"username", "password");
// Create a statement using a stored procedure
out.println("Creating query...");
OracleCallableStatement st = (OracleCallableStatement)conn.prepareCall ("BEGIN archive.spSrchLanguage (?, ?, ?); END;");
st.registerOutParameter(3, OracleTypes.CURSOR);
st.setInt(1, 0);
st.setInt(2, 12);
st.execute();
ResultSet rs = ((OracleCallableStatement)st).getCursor(3);
<HR></BLOCKQUOTE>
null

EPSI Dashboard problem after moving from reporting services 2005 to 2012

I have created a Dashboard with Allscripts EPSI with a Reporting Services Report. After we changed from Micrsosoft Reporting Services 2005 to 2012, the report now gets cut in half. I turned a ticket in to Allscripts and they said that it had
nothing to do with their software, that it had something to do with a setting on our Reporting Services server. Please point me into the right direction.

Hi Jason,
Based on my understanding, after you move the report from Reporting Services 2005 to Reporting Services 2012, the report can’t display well.
In Reporting Services, upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file. In your scenario, if the .rdl file isn’t upgraded in the new environment, it’s expected that the report won’t display well. So please
open an .rdl file in Report Designer in SQL Server Data Tools (SSDT) within the new environment, then the Report Designer will automatically create a backup file and upgrades the report to the current namespace. After a report is upgraded, you might notice
additional errors, warnings, and messages. This is the result of changes to the internal report object model and processing components, which cause messages to appear when underlying problems in the report are detected.
Reference:
Upgrade Reports
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

SCOM 2012 R2 Upgrade Plan Discussion

Dear Experts,
Currently I have a RMS and one MS Server with SCOM 2007 R2 in my Test Environment (Windows 2008 R2).
Now, The Upgradation plan is below and please correct me if I am wrong.
SCOM 2007 R2 CU4 --> SCOM 2012
SCOM 2012 --> SCOM 2012 SP1
SCOM 2012 SP1 --> SCOM 2012 R2.
So we need to purchase of three types of SCOM 2012 versions S/W or else we can simply download those versions from Microsoft ?
Please provide me the complete process of this Migration cycle.
Saravana Raja

Hi Saravana:
Upgrading to System Center 2012 – Operations Manager is supported from Operations Manager 2007 R2 CU4, or from the latest available CU. See
http://technet.microsoft.com/en-us/library/hh476934.aspx.
As for upgrading from SCOM 2012 to SCOM 2012 SP1 to SCOM 2012 R2, MVP Marnix Wolf is clear that you need to perform each upgrade step separately:
http://thoughtsonopsmgr.blogspot.com/2013/07/upgrade-paths-to-system-center-2012-r2.html. The "complete process" would consists of performing the upgrade for each version one after the other, again, just as you put in your plan.
You do not need to purchase any additional software, but you will need to download the 3 versions as you described from Microsoft volume license site or other media source.
John Joyner MVP-SC-CDM

SCOM 2012 SP1 Upgrade

Hello,
I have a SCOM 2007 R2 CU7 server that I upgraded to SCOM 2012. I am running Windows Server 2008 R2 SP1 and SQL Server 2008 R2 SP2. I tried twice to upgrade it to SCOM 2012 SP1 and it failed both times. In the OpsMgrSetupWizard.log file,
I see this error:
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value to enable this feature.
See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
[10:58:04]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[10:58:04]: Error: :RunStandardScripts failed with the following exception: : Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[10:58:04]: Error: :StackTrace:   at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Delegate.DynamicInvokeImpl(Object[] args)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.Action.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.InstallStep.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
[10:58:04]: Error: :Inner Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131604, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value
to enable this feature. See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
After both failed upgrades, I had to re-install SCOM 2007. How can I get the upgrade to complete? The prerequisites have been installed.

So try to change the SQL database Compatibility Level to SQL 2008 (100):
1. Open SQL Server Management Studio
2. Connect to the SQL server hosting the Operations Manager Databases
3. Expand Databases, Right Click on OperationsManager and click properties
4. Click Options, Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
5. Right Click on OperationsManagerDW and click properties, Click Options
6. Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
Niki Han
TechNet Community Support

Timeouts and connection problems after 5.1(2) upgrade

AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?

I don't know specifically, but I did notice that 5.1(3) was released today.

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

Dictation problems after ios 8.2 upgrade

I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
    1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated! Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
    2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
2. In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox. That means I HAVE to type n I stink at that. To reproduce I simply:
1. press the microphone.
2. Type in only numerics 1 thru 17....it will dictate to look like this: 123 456-789-1011 1213 1415 1617
3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
4. press the microphone
   5. "Beep/dong" noise because it wont let you dictate any more of anything said.
I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
I Have not trieddictation on my mac...yet.
CAn someone help on these issues please? Thanks!

Hey Markwoody,
Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
https://support.apple.com/en-us/ht201559
How to reset
- You should reset your device as a last resort and only if you can't restart it.
- To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
Use iTunes to restore your iOS device to factory settings - Apple Support
http://support.apple.com/en-us/HT201252
Thanks,
Matt M.

Problems After Win 8.1 Upgrade - Two Additional Partitions Both With Same Volume Serial Number?

An update from Win 8 Pro to Win 8.1 Pro has occurred automatically on one of my machines.
Prior to the upgrade (from memory) the machine had an OEM Partition (40MB), EFI System Partition (500MB), Recovery Partition (8.17GB) and OS (C:) partition. Only the latter was visible in Computer.
After the 8.1 upgrade there are two additional partitions, Recovery (500MB) and Recovery (450MB). All the partitions are now displayed in This PC as drives except the 40MB OEM Partition.
When viewed in This PC both the two new drives (that appear to equate to the new partitions) show as 499MB each with the same amount of free space. In Disk Management the first new partition is shown as 500MB and the second as 450MB.
I have SugarSync installed on this machine and since the upgrade it is displaying an error telling me it won't work because the two new drives have the same Volume Serial Numbers.
Clearly something has gone wrong with the upgrade:
Is there any way to resolve the Volume Serial Number conflict?
Is there any way to stop all these drives appearing in This PC?
Do I need the two new partitions and if not how can I get rid of them?

There is a fourth path to upgrading to Windows 8.1 provided by Microsoft. Microsoft have been displaying automated reminders from time to time on Windows 8 computers that Windows 8.1 update is available to download - from these reminders it is possible to
choose either Install or Not Now. Just recently these reminders have changed, they are instead notifying the user that the Windows 8.1 Update will be installed automatically or the user has options to postpone the installation for 1hr, 2hrs, etc. The
user of this computer tells me she went away from the machine and Windows 8.1 update installed automatically from one of these prompts.
I have seen these installation prompts on several of my customer's computers and they are not malware related (I deal with malware removal every day and would recognise this). However, I have scanned this computer with Bit Defender and MalwareBytes and there
are no infections present.
The only difference between this Windows 8.1 Update and the others that I have carried out is that it wasn't controlled and therefore I wasn't able to disable the security software (Bit Defender Internet Security 2015). This may be the cause of the problem.
I've uploaded the two screenshots you asked for - the two new drives are W: and Z: and SugarSync is reporting that they have the same Volume Serial Numbers. Note: X: and Y: were not visible prior to the upgrade.
There are two Windows Update logs at C:\Windows\ so I will upload both.

Dashboard Downtime - Uptime SCOM 2012

Hello
I have SCOM 2012 installed. The principal functions it is able to monitor the uptime and downtime of Windows 2012 R2 servers (Exchange - Lync - Hyper-V) on a Dashboard and have SLA in Datacenter Monitor.
Is possible may have a Dashboard with real-time measurements (Downtime - Uptime) in SCOM and also SLO Dashboard?
I create a SLA Tracking and shutdown a host for 2 hours was always 100% the Dashboard.
Thanks for your help.
Regards

Hi,
When you are creating Service level tracking, please chose Windows operating system as the targeted class, and then create a service level dashboard to add the created SLA, you may get the downtime and uptime information.
The articles below should be helpful for you:
Defining a Service Level Objective Against a Group
https://technet.microsoft.com/en-us/library/hh212877.aspx
SCOM 2012 - Configuring the Service Level Dashboards
http://kevingreeneitblog.blogspot.com/2012/04/scom-2012-service-level-dashboards.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCOM 2012 R2 Upgrade - Reporting goes to install mode instead of Upgrade

Hi
I have upgraded all scom managent servers succesfully, but when I try to run setup.exe on the SQL server it doesn't detect the existing SCOM 2012 SP1 Reporting installation and instead of Upgrade mode it goes into Install mode. Have anyone seen this
before?
Torboro

Hi Torboro,
Just a quick reviewal of the below settings.
Can you once check and see if SCOM 2012 / 2012 R2 wizard / program is showing in Add / remove programs
of the reporting server.
If yes can you select uninstall / repair option and give next it will show the installed components
and see if you get the reporting option there as per my screen shot below plz?
Gautam.75801

HT5037 problems after using iPhoto library upgrader

i can't open iPhoto library after using iPhoto library upgrader for a disk with a few pictures from an old iPhoto library on it. please help

did you execture the library upgrader (in the APplications folder ==> utilities double click on it)? What exact problem are you haveing?
LN

SCOM 2007 R2 to SCOM 2012 Migration\Upgrade

What are the different ways to migrate\Upgrade from scom 2007 r2 to scom 2012 r2 ?

This link lists multiple upgrade paths.
Is this what your looking for?
http://technet.microsoft.com/en-us/library/hh476934.aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

SCOM 2012 SP1 Upgrade - RMS fine but can't upgrade reporting or web console

Hi,
We've just upgraded our RMS to SCOM 2012 SP1 and everything went smoothly as per the documentation. However when I next try to upgrade the Reporting or Web Consoles (located on separate servers) to SP1 I am presented with a message saying:
"The management server to which this component reports has not been upgraded".
At that point we cannot proceed past the prerequisite checker.
I am totally confident that the SP1 upgrade went through on the RMS and all file versions are at SP1.
Can anyone help please?
Thanks,
Tim

Hi Retee,
I was not able to find a fix for this but I did find a workaround.
1. I copied the installation files from the SCOM 2012 SP1 DVD/ISO to a folder, SCOM_2012_INSTALL on the reporting server.
2. Browsed to the following folder ..\SCOM_2012_INSTALL\setup\AMD64\ and commented out the following section of the IntermilestoneUpgradePrereqs.xml file:

3. Ran ..\SCOM_2012_INSTALL\setup.exe and the upgrade was successful.
Our SCOM infrastructure has now been at 2012 R2 for a couple of months and I have not seen any issues caused by commenting out this section. But as always, use at your own risk.
Hope this helps.
Thanks,
Iain

SCOM 2007 R2 to SCOM 2012 SP1 upgrade issues.

We have SCOM 2007 R2 on one of our development Environment.
The plan was to upgrade to SCOM 2012 R2 so we installed the SCOM 2007 R2 CU5.
We are having issues to upgrade now from SCOM 2007 R2 CU5 to SCOM 2012 SP1.
While upgrading we received the below message:
Unable to Proceed
Setup is unable to proceed with installation for the following reason:
At least one of the following application is installed on the computer.Due to incompatibility with system center 2012 - operations manager,these applications must be uninstalled.
-System Center 2012 - operations manager beta
-system center operations manager 2007
-system center operations manager 2007 sp1
--system center operations manager 2007 r2
-system center service manager agent
--system center essentials agent

Hi,
You cannot upgrade from SCOM2007R2 to SCOM2012SP1, you must upgrade to SCOM2012 and the upgrade to SCOM2012SP1
Cameron Fuller has a blog:
http://blogs.catapultsystems.com/cfuller/archive/2013/02/11/can-you-upgrade-from-opsmgr-2007-r2-to-opsmgr-2012-sp1-scom-sysctr.aspx
Upgrading System Center 2012 – Operations Manager to System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899854.aspx
"The only supported upgrade path to System Center 2012 Service Pack 1 (SP1), Operations Manager is from System Center 2012 – Operations Manager. If you are upgrading from System Center Operations Manager 2007 R2, you must first upgrade to System Center 2012
– Operations Manager"
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Dashboards Problem after SCOM 2012 Inplace Upgrade- Missing Stored Procedures

Similar Messages

Maybe you are looking for