Timeouts and connection problems after 5.1(2) upgrade

AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?

I don't know specifically, but I did notice that 5.1(3) was released today.

Similar Messages

Synch and connect Problems after upgrading to latest version 7.6.1.9 itunes

OK... this is getting painful!!!!!!!!
1. Has worked for 6 months flawlessly....
2. Upgraded Apple TV to the latest update - 2.0 - new look and feel.
3. Said I now needed to update iTunes to latest
4. Updated itunes to 7.6.1.9
5. Apple TV still showing in iTunes. Went to synch - "got apple TV not responding port 3689".
Apple TV could still connect to movie trailers, youtube, everything,
6. Tried repairing iTunes 7.6.1.9 with install. Had to reenter Apple TV password. Showed in device list - still same not responding error.
7. Uninstalled iTunes - reinstalled - along with cycling Apple TV. Apple TV showed in device list - not responding still.
8. Verified firewalls - non enabled just for a sanity check. I've kept all firewall stuff off. Still same issue.
9. Tried Edit/ Preferences/ Sharing/ Share my library on local network. Nothing
10. Verified "Look for Apple TVs" enabled and mine shows in list. Still nothing.
11. Turned Airport Expres in Apple TV off. Cycled everything... itunes, Apple Tv... nothing... Turned it back on....
12. In Apple TV I synched to local itunes.... Apple TV now got fully erased. as I expected, but did not care just wanted it to synch to the new content.
13. Reset the Apple TV to factory settings...... It showed in the Itunes for a few seconds, but not enough time for me to put in the password. I've recycled everything again. For the life of me I can't get it to now show consistently in the device list..... My wireless works flawlessly browsing the internet. I've done netstat checks to verify the ports and everything seems as it always has. IT HAS TO BE THE UPDATES!!!
There should be no application conflicts, because this machine has only been used to synch my Apple TV, nothing has been installed in a while, except iTunes!
I'm about to bring it back........
Any other thoughts out there?

Resolved.
After verifying my network configurations, which was fine, I started to look at the services loaded on the machine. I noticeced BLACKICE running! Once this service was stopepd, things went smoothly.
I do still notice that the synch lasts only for so long and then disconnects the device. I have to restart iTunes to kick start the synch again. Still a little painful, but at least I can loat the Apple TV.

My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

XE connection problem after using Cisco AnyConnect Client

Hello
I have a rather annoying problem connecting to an XE instance AFTER I have disconnected from a VPN via a Cisco AnyConnect VPN Agent.
Sequence of operations:
- start Oracle XE and work normally
- connect to client's vpn
- do other stuff
- DISCONNECT from Client's VPN
-> unable to connect to XE service any more, unless I reboot
The problem does not happen with other vpn clients like Cisco VPN Service, Juniper, Checkpoint.
Details:
- sqlplus connection WITH service name (eg sqlplus user/pwd@XE): FAILURE with ORA-12170
- but...sqlplus connection WITHOUT service name (eg sqlplus user/pwd): SUCCESS (weird !)
- tnsping XE: TNS-12535 error
- lsnrctl status output (sorry, italian localized)
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-GIU-2011 14:19
:38
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATO del LISTENER
Alias LISTENER
Versione TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Data di inizio 22-GIU-2011 12:26:15
Tempo di attivitÓ 0 giorni 1 ore 53 min. 22 sec.
Livello trace off
Sicurezza ON: Local OS Authentication
SNMP OFF
Servizio predefinito XE
File di parametri listenerC:\programs\oraclexe\app\oracle\product\10.2.0\server\
network\admin\listener.ora
File di log listener C:\programs\oraclexe\app\oracle\product\10.2.0\server\
network\log\listener.log
Summary table degli endpoint di ascolto...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=MyPCName)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Summary table dei servizi...
Il servizio "CLRExtProc" ha 1 istanze.
L'istanza "CLRExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
Il servizio "PLSExtProc" ha 1 istanze.
L'istanza "PLSExtProc", stato UNKNOWN, ha 1 handler per questo servizio...
Il servizio "XEXDB" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Il servizio "XE_XPT" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Il servizio "xe" ha 1 istanze.
L'istanza "xe", stato READY, ha 1 handler per questo servizio...
Environment:
Win7 Pro SP1
Oracle XE 10.2.0
I have stopped the Win firewall and the problem is still there, so it is not a firewall problem
listener.ora configuration
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\programs\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyPCName)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Any help ?

Hi;
Pelase close this tread as answered and keep update issue at:
Re: XE connection problem after using Cisco AnyConnect Client
Regard
Helios

Share and save problem after latest update

hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?

i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

Why is my iphone 5 having network and battery problems after the ios 6.1.2?

why is my iphone 5 having network and battery problems after the ios 6.1.2?

I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.

WiFi Internet connectivity problems after upgrade to 10.8.4

After upgrading to MacOS 10.8.4 I am facing regular interruptions to my WiFi internet connectivity. Periodically the internet connectivity is lost and the only way to fix the problem is to turn WiFi off and on again. This happens frequently when I am downloading files at using big bandwidth (more than 1.5-2 MB/s). If I use assist me on the Network preferences tab, it displays an ISP error when the connectivity is down, however I am certain that I do nota have any kind of ISP or router issue since at the same time I have WiFi internet connectivity from my iPad mini, iPhone 4S and Samsung Galaxy S3. Therefore it should be a 10.8.4 issue

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Having bluetooth connection problem after using Yosemite for a week

After installing and using Yosemite for a week, I experienced bluetooth connection problems with my magic mouse and headphone, my model is macbook pro retina early 2013, hope to fix this soon

Hello there Oranger84,
If I understand correctly you are having some sort of Bluetooth issue between your computer and Magic Mouse and Headphones after installing Yosemite. Depending on the particular symptoms you are seeing, I would recommend the following article to help you get that resolved:
Troubleshooting wireless mouse and keyboard issues
Thank you for using Apple Support Communities.
All the best,
Sterling

Dial-up connect problem after 10.4.9 update

After installing the 10.4.9 update it has been very difficult to connect to the dial-up internet server. It may take 19 tries clicking "Connect" before it connects and sometimes it connects after four tries. The error messages vary: unable to connect to PPP or no carrier detected are the most frequent messages. Once on-line everything works fine except for being able to send mail. I'm unable to send mail - that error message wants the SMTP server settings and any advanced settings checked.
I called Apple support and the Apple Tech had me reconfigure the Network to dial an "800" number to a PPP Dial-Up Test Site. When that worked succussfully a window displayed a message that the modem, the PPP or Remote Access software, the TCP/IP software is functioning and correctly configured for a PPP connection to this server. The Apple Tech checked the information on the 10.4.9 upgrade and did not find any reason to think it would cause this problem. Apple Tech suggested I contact the dial-up server.
The dial-up server went over all the configurations and they were all correct. During my phone call to them they could hear the computer dial-up sounds and said it sounded like the normal "hand-shake". The dial-up server has had no reports of problems with connecting to their service other than mine.
If anyone knows what could have caused this problem, how to fix it or has the same problem I'd be very interested in hearing from them.
Thanks, AppleProblem
iMac G5 Mac OS X (10.4.9) Power PC
iMac G5 Mac OS X (10.4.9) Power PC
iMac G5 Mac OS X (10.4.9) Power PC

You have been most helpful and we think the problem is solved. After I send this message explaining what has transpired I'll go back and click on the "Solved" button.
Based upon your suggestion to try "Script, like v32" I started experimenting with the four internal modem options we have in our Modem settings. They are v.32, v.34, v.90 and v.92. I tried to connect three different times with each one. The v.32 didn't connect, the v.34 connected all three times, the v.90 connected the first two but not the third or the fourth try. On the fifth attempt the Mac froze up, the mouse/arrow wouldn't work and there was a high speed motor sound. I tried a Force Quit (Option,Command,Escape), I tried a Hard Shut Down (holding the power key) and when these didn't work I pulled the plug. Then, I booted back up and connected on the second try using the v.90. I don't know why the computer froze up and assume it is nothing to be concerned about.
I then called our ISP and found that the two access numbers are both v.90. I suspect that until we did the version upgrade to the 10.4.9 that our computer was accommodating the v.90 eventhough it was a v.92 (!?!). Just a guess.
I also asked the ISP tech why we couldn't send mail. He asked if we had the password set for the outgoing mail. He said if we're using the access number owned by them it didn't require a password but the other access number is not owned by them and is used by other ISPs and it does require a password. We had never set up our Mail Preferences outgoing mail settings to use a password. Before our connect problems we had always used the number owned by them and after the connect problems we started using the other number because we found that we could connect to it with fewer attempts. We put in the necessary information and now have no problem sending mail.
We have also been looking for another ISP and the web site you gave us www.fastermac.net looks very promising. They have one access number in our area and we want to check if it is v.92 or v.90. During our research for an ISP we learned that if it is a v.92 access number (and we use our v.92 modem) we'll be able to answer phone calls and remain online. That will be a real blessing. Thanks!
We really appreciated your brain storming with us and your perseverance. Thanks so much!
iMac G5 Mac OS X (10.4.9) Power PC

Connectivity problems after IOS 7.0.4 upgrade

Hi there, I just upgraded my ipod touch to IOS 7.0.4 and ever since i'm having trouble connecting to Outlook, using the web browser, safari. Also my emails aren't synced with my mail box. Both work sporadically. I can access all other web pages just not outlook. Bizarrely my macbook is suffering the same problem as well since the upgrade of the ipod touch.
Has anybody experienced the same problems? Does it have something to do with icloud?
Thanks!!

I have the same issue, after the update at this IOS version, the wifi connection ended to work....I restated 3 times completely the IPhone but the problem is still present.....
The battery now has the autonomy very low and the phone is very slow.

OSX 10.6.7 gets confused on access and connection rights after updateing device or program

Hello
On all our 4 Mac, all with Snow Leopard 10.6.7, I have an issue with storing access and network connection rights after updating programs and devices.
We have a Canon network printer. Everything worked fine, the necessary programs had the rights to accept incoming network connections. But then I reinstalled the printer on two Macs because of the PDF fonts problem with 10.6.7. But now, the system asks for every single document if incomming connection should be allowed, even if the according program is listed in the firewall as "allow". Deleting the program from the list in the firewall and add it newly did not help.
The same issue occures now with a selfwritten Applescript program. It access a key in the keychain. I told the system to allow access always, that worked in the beginning, but after updating the program, it does not store the program as allowed any more. I cannot even add it manually to the allowed list for the specific key. Means, I can select the program after clicking the plus, but the program simply not shows up in the list.
This happened on two Macs up to now, one is the same as the printer problem, but the other does not have the printer problem (up to now).
What to I have to do, that the program stores the given rights newly, also after updating a device or program?
Other people have the same problem as you can see here.

reFX guys were very helpful and took remote connection to my desktop. It was 5 minutes and Nexus2 was up and running.
The thing was that my hard drive is case sensitive. They just renamed the file white_3_nsk to lower case in
/Library/Audio/Plug-Ins/Components/Nexus.component/Contents/Resources/. After that, everything is working.
Hopefully this helps someone in the future who has put fortune to Nexus2 and gets heart attack when it doesn't work.
Regards,
Hannu

Wifi connection problems after upgrading to 4.3.5

Hello everybody,
I have the same problem on iPhone 4 and iPad 2 after upgrading to 4.3.5 (8L1): once you are connected to a wi-fi network and after you leave the device unused for a while (so that it goes to sleep) the wi-fi connection is lost and the only way to get it again is to switch wi-fi off and on. After that everything works until the next sleep.
Is anybody experiencing the same problem?
Thanks
Diciotto

I have similar problem with my iPad but not with iPhone 4. Have you figure out why and how?
Thanks,
Grace

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

No Battery Charge and Other Problems After OS3 Install - Solution?

This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
WHAT I'VE BEEN TOLD BY APPLE:
1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
3) Initial data transfer after email configuration . . . but symptoms continued long after this.
4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
SOLUTION: Turning off "push" on your exchange email account
1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
3) Scroll down and select - Advanced -
4) Identify and select your Exchange Server account
5) Select - Fetch -
6) Leave settings
Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

IPhone 3gs reception and connection problems, HELP!

My iPhone 3GS is having mutiple issues, including battery life, making and receving calls, making and recieving texts, and connecting to the internet. Lots of calls that people try to make to me never show up, and ones that do drop. It takes a few trys to get my calls to go out. Texts are the same way. Internet is sluggish and has trouble loading things without WIFI. My phone also has an overall sluggish-ness.

I tried again to restore last night. But now, restore wont complete. An error comes up after the firmware download to the phone. Now the phone is in recovery mode?
I went this morning to the Apple store - no appointment, silly of me :\. they they didn't have any open appointments today, so I made one for WED Morning, untill then, I will pull the sim card and put it into my trust old Blackberry curve

Timeouts and connection problems after 5.1(2) upgrade

Similar Messages

Maybe you are looking for