Data aggregation

Hello,
Is it possible to aggregate data dynamically?
I have 3 combo boxes set up with filtered row functionality, and the data that is being filtered need to be aggregate.
How do I achieve this?
Thanks.

Hi Justine,
What I would do is have the formulas to aggregate the data look at the filtered data not the original data.
I have set up dashboards that have the original data on one tab. User selects a menu option which filters the data on another tab. Formulas & chart data are on anotehr tab and updates when ever new data is pulled on the filtered data tab.
Hope that helps.

Similar Messages

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?

Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??

I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

DATA AGGREGATION ISSUE IN REPORT

Hi,
when we were running query by selcting the the version . the data is aggregation dono where it went rong
Explanation :
we alredy loaded data with version for the year 2010.. we started laoding from April 2010 to March 2011.. as 12 fiscal periods, with 53 versiions. here version means week(1to53 weeks for year ) but we started laoding from April means 14th week of year 2010. to March 2011. til here no probelm with data every thing is matching in the report/
now the turn comes for laoding data from April 2011..Again 14 version came which is alredy in system for April 2010
now what is happening ..
when we laod data for 14 week of 2011 (April). data is Aggregating or some mixxing up with data..
so what we had done is we had added calyear in the filter so that user can see only the data for version with respective year.
even though data is Aggregation with previous year(2010) for the same version alredy in system ..
nothing is working outt..
can u pls sugest us , any probelm in the back end , need to do any changes for modelling ..
till now what we had done is deleating the data from cube and dso for April2010 for 14 version and laoding data for April 20110 with version 14 . which is toatlay new version in system.
So this Keep on continuying every time..when data not matching.
now for the Month May with version 20 we have to laod the same probelm should not repeat .
pls help with your valuable sugestion detailly.
And this forecast summary report , we have data for next 2 years. planning is doing for every 2 years from currentt date
Any queries pls let me know
Edited by: afzal baig on May 11, 2011 4:00 PM

Hi
is your data stored in a cube or DSO? If it is DSO - is version and period / calmonth a key field?
what type of key figure are you using and what is the aggregation rule for this key figure - in the infoobject definition and in the query definition?
is there anything unusual in the definition of your version characteristic? any compounding?
Why did you not use 0calweek?
regards
Cornelia

Data aggregation: which solution for this case ?

Hi all,
I have a fact table where measures are referred to a single year. Outlining, something like this:
year quantity
1998 30
1998 20
2000 70
2001 20
2001 20
I would to build a cube and then to analyze "tot.quantity for each year" but don't want aggregate "tot.quantity for all year".
I haven't in my source database the "Year dimension" to mapping on year field.
Do you have some suggestions on how to implement this and how to build cube using AWM tools (Year dimension and relative levels/hierarchies)?
thanks.

I am not sure I fully understand what you are trying to do, but from the example below you could create a single dimension called Year with one level of Year, add a hierarchy containing only one level, create a cube dimensioned by year and then map the table you have described below to the cube. As there is only one level in the dimension, no aggregation would performed by AWM.
For the mapping you will need to create a view over your source table as follows:
CREATE VIEW FACT_VIEW AS SELECT, YEAR, SUM(QUANTITY) FROM TABLE GROUP BY YEAR
because AWM does not support an additive data loading model (surprisingly the API actually does but this is not exposed in AWM). You can only provide a single row for each dimension member. If you present multiple rows then the last row wins which in your example would result in the following data being loaded into AWM:
1998 20
2000 70
2001 20
If you create the view as shown above you should get the following data loaded:
1998 50
2000 70
2001 40
which is what I think you want?
Hope this helps
Keith Laker
Oracle EMEA Consulting
OLAP Blog: http://oracleOLAP.blogspot.com/
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
DM Blog: http://oracledmt.blogspot.com/
OWB Blog : http://blogs.oracle.com/warehousebuilder/
OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

BPM performance- data aggregation persistance

Hi,
I have a situation of large volumes of records to be evaluated, aggregated and split into different scenarios.
Q1.
Best way to persist this aggregated data.
Q2.
Has anyone found, know or could suggest the best way for this to run optimal.
Regards
Ian

Hi Ian,
I have both implemented some services on XI 2.0 using ABAP-Proxys at a XI-Application-System / Cluster-Databases and the same services on XI 3.0 with BPM. The proxy solution was much more performant but of course the BPM-Solution has a better monitoring and the advantage of beeing in standard. For a proxy solution you have to copy a XI mandant and configure it as "Application System". It will serve as a message allocator. The ABAP-Code (or Java) is executed in the Inbound proxys, where you can call Outbound proxys or implement database operations.
Regards Udo

Data aggregation problem in query

Hi everyone,
I have the data in the following format in ODS with Doc# IT# SC# and DT# as KEY. My requirement is to see the data in query as shown below (Query view 1 and Query view 2).
DOC#   IT#   SC#   DT#             QTY
123      01     1       9/01/04        10
123      01     1       9/02/04        10
123      01     1       9/03/04        10
123      01     2       9/04/04        10
123      01     3       9/05/04        10
123      01     3       9/06/04        10
Query view 1
DOC#   IT#   SC#         QTY
123      01     1             10
123      01     2             10
123      01     3             10
Query view 2
DOC#   IT#    QTY
123      01     30
Can anyone let me know how can I achieve this ?
Helpful answers will be rewarded.
AK

No replies ???
AK

Year to Date Aggregation

I want to aggregate the sum of cash transactions year to date, weekly.
I have the following code:
SELECT    SUM(T2.Debit-T2.Credit), datepart(wk, T1.refdate)
FROM       OACT INNER JOIN
                JDT1 T1 ON T1.Account = OACT.AcctCode Join JDT1 T2 on T1.transid = T2.transid
     and datePart(wk, T2.RefDate)<= DatePart(wk, T1.RefDate)
     and datePart(wk, T2.RefDate)>= CAST(CAST(YEAR(T1.RefDate) as CHAR(4)) + '0101' AS    DateTime)
WHERE     (OACT.FatherNum = N'1000') AND (T1.RefDate > CONVERT(DATETIME, '2009-01-01 00:00:00', 102))
Group by datepart(wk, T1.refdate)
Order by datepart(wk, T1.refdate)
This is not working, I get all zero values.
Any help is appreciated.
Rob

This is how I solved the problem
SELECT     Distinct DatePart(wk, T1.refdate) as Week,
     (Select SUM(T2.Debit-T2.Credit) from JDT1 T2
          Where DatePart(wk, T2.RefDate)<= DatePart(wk, T1.RefDate)
          and T2.Account < '_SYS00000000020' and Year(T2.RefDate) = 2009 ) as 'Cash Balance'
FROM      JDT1 T1
Where      Year(T1.RefDate) = 2009
     and DatePart(wk, T1.refdate) <= datePart(wk,getdate())
Order By     DatePart(wk, T1.refdate)
It isn't elegant, but it works.
Rob

Small data aggregation question

Starting with this data:
select * from things
NAME                 TYPE                 THING
dave                 item                 can
mike                 item                 box
mike                 consumer elec        television
mike                 consumer elec        radio
mike                 automobile           volvo
ryan                 automobile           saab
ryan                 automobile           chevrolet
mike                 automobile           volvo
mike                 automobile           volvo
mike                 automobile           volvo
mike                 consumer elec        radio
mike                 consumer elec        radio
mike                 consumer elec        radio
13 rows selectedI have successfully constructed this query, which almost gets me where I want to be:
    select name,
            ltrim(max(sys_connect_by_path(thing,','))
            keep(dense_rank last order by curr),',') as things
      from (select
               name,
               thing,
               row_number() over (partition by name order by thing) as curr,
               row_number() over (partition by name order by thing) -1 as prev
             from things)
group by name
connect by prev = prior curr
       and name = prior name
start with curr = 1;
NAME                 THINGS
dave                 can
mike                 box,radio,radio,radio,radio,television,volvo,volvo,volvo,volvo
ryan                 chevrolet,saab
3 rows selectedwhat I want (hope for, rather) is this:
NAME                 THINGS
dave                 can
mike                 box,radio(4),television,volvo(4)
ryan                 chevrolet,saab                                                Can anyone give me some clues to help me get what I want?
Thanks!

Just aggregate your data:
SQL> with things as(
2 select 'dave' name,'item' type,'can' thing from dual union all
3 select 'mike','item','box' from dual union all
4 select 'mike','consumer elec','television' from dual union all
5 select 'mike','consumer elec','radio' from dual union all
6 select 'mike','automobile','volvo' from dual union all
7 select 'ryan','automobile','saab' from dual union all
8 select 'ryan','automobile','chevrolet' from dual union all
9 select 'mike','automobile','volvo' from dual union all
10 select 'mike','automobile','volvo' from dual union all
11 select 'mike','automobile','volvo' from dual union all
12 select 'mike','consumer elec','radio' from dual union all
13 select 'mike','consumer elec','radio' from dual union all
14 select 'mike','consumer elec','radio' from dual)
15 -- Test data
16 select     name,
17                                  ltrim(max(sys_connect_by_path(thing||decode(cnt,1,null,'('||cnt||')'),','))
18                                  keep(dense_rank last order by curr),',') as things
19          from (select
20                                           name,
21                                           thing,
22                                           count(*) cnt,
23                                           row_number() over (partition by name order by thing) as curr,
24                                           row_number() over (partition by name order by thing) -1 as prev
25                                   from things group by name,type,thing)
26 group by name
27 connect by prev = prior curr
28         and name = prior name
29 start with curr = 1
30 /
NAME            THINGS
dave            can
mike            box,radio(4),television,volvo(4)
ryan            chevrolet,saabBest regards
Maxim

Data aggregation in inbound scenario

Hi,
I have a inbound scenario where I will get bill level details from all the stores (store#, date, item1, quantity1, amount1, item2, quantity2, amount2.....) .I have to aggregate the data for each store seperately and post it into SAP.
please let me know how to handle this scenario in XI.
Example:
Input file1:
Store#1001 (bill#1)
Item1# Quantity1 amount
11           10              100
12            20              200
Input file2:
Store#1001 (bill#2)
Item1# Quantity1 amount
17           70              700
12           80              800
Input file3:
Store#2001(bill#1)
Item1# Quantity1 amount
12            30           300
13            40           400
Input file4:
Store#2001(bill#2)
Item1# Quantity1 amount
19            90           900
13           60           600
output file1:
Store#1001
Item1# Quantity1 amount
11           10              100
12           100             1000
17           70                700
output file2:
Store#2001
Item1# Quantity1 amount
12           30             300
13            100             1000
19             90            900
Edited by: rajesh shaik on Jan 12, 2008 9:59 AM

Hi Rajesh,
In which format are you getting the incoming file.
-Sudhir

Unary oparators and data aggregations

hi eb
Do heirarchies with unary oparators
get data aggregtions the same way regular heirarchies do - or their members are aggragated on the fly only?
TIA
Rea

hi eb
Do heirarchies with unary oparators
get data aggregtions the same way regular heirarchies do - or their members are aggragated on the fly only?
TIA
Rea

Specific limitting of OLAP data aggregations in RDB9i by BIBeans

Hi! I would like to know, how to limit aggregation (sum of values to the higher levels) of measure values to one dimension only and further to selected codes of this dimension. JDeveloper9i aggregates measure values for all dimensions without regard to the parameters used in the function "cwm_utility.create_function_usage" and in the procedure "cwm_olap_measure.set_default_aggregation_method". Thanks. Pavel

Venkat,
We have a very similar issue, but there is almost no material to help us. If this gets to you, please let me know if you progressed it or whether I need to go to Microsoft for a solution
THanks
David

Webi report data aggregation problem

Hi Gurus,
I have a problem when running webi report upon BI query.
In infoview, report shows as below,
Material          Plant             Sales
A                        001               100
A                        002               100
B                         001              120
If I drap Plant column out, it shows,
Material                Sales
A                           100
B                           120
Material A's sales is 100, not 200 as in BI rsrt1.
What might be the problem, any clue?

Hi Rongliang，
I've checked it, it is set as you said.
The problem still exists.
Another thing is , we got 3 dimensions, Material, Sales Org, Plant,
Key figure aggregates well for Sales Org and Plant, but not working for Material.
Any clue?

Oracle sql query with data aggregation

Hi,
I need help to aggregate sql result as given below
Result what I get :
Project Id | Project Name | Employee ID | Task Count
1 :::::::::::| Project01 ::::::| 254 :::::::::::::| 20
1 :::::::::::| Project01 ::::::| 266 :::::::::::::| 32
1 :::::::::::| Project01 ::::::| 654 :::::::::::::| 12
2 :::::::::::| Project02 ::::::| 741 :::::::::::::| 54
2 :::::::::::| Project02 ::::::| 266 :::::::::::::| 31
3 :::::::::::| Project03 ::::::| 877 :::::::::::::| 8
3 :::::::::::| Project03 ::::::| 955 :::::::::::::| 19
Result should come like this :
Project Id | Project Name | Employee ID | Task Count
1 :::::::::::| Project01 ::::::| 254 :::::::::::::| 20
::::::::::::::| ::::::::::::::::::::| 266 :::::::::::::| 32
::::::::::::::| ::::::::::::::::::::| 654 :::::::::::::| 12
2 :::::::::::| Project02 ::::::| 741 :::::::::::::| 54
::::::::::::::| ::::::::::::::::::::| 266 :::::::::::::| 31
3 :::::::::::| Project03 ::::::| 877 :::::::::::::| 8
::::::::::::::| ::::::::::::::::::::| 955 :::::::::::::| 19
I need to know whether this is possible using only sql and how to do ? (Please ignore the colons)
Thanks

please learn how to use tags
[code]
Project Id | Project Name | Employee ID | Task Count
1          | Project01    | 254         | 20
           |              | 266         | 32
           |              | 654         | 12
2          | Project02    | 741         | 54
           |              | 266         | 31
3          | Project03    | 877         | 8
           |              | 955         | 19
[/code]

Data aggregation by the 2 first characters of a characteristic

Hi,
in a query, i'd like to extract the two first characters of a characteristic and aggregate a key figure.
For example, i have the characteristic material number and the quantity.
Mat numb      0Qty
01AAAA         1
01BBBB         1
01CCCC         2
02AAAA         2
02DDDD         3
AATTTTT        3
Here is the result i want :
Mat numb      0Qty
01                 4
02                 5
AA                3
i can't use the selection condition because i don't know what is the value of the 2 first Characters. i don't want to modify the infocube by adding a new characteristic?
Is there any regular expression in the selection condition i can use ( for ex : for characteristic Material Number, select the first character between 0 and A and the second between 0-A and *) ?
Do i have to do it by using a user exit ?
Thanks for your help.

When I did that it juts brought over the text from the table of contence. I thought maybe that was needed. So I deleted what was their before and replaced it with what popped in. I did the same for the section pages. Just to see what happened. It brought in the section numbers and it did pretty much the same. I'm fine with relabeling my pages to match. The table of contents.    I still would like that first chapter page in the table of contents to actually link to the page if possible. It still not linking right.

Reading aggregated data from a cube/multiprovider

Hi BI people
My project is currently looking for a functionmodule that reads aggregated data from a cube/multiprovider.
I already have a functionmodule that reads data from a cube and returns it in a flat format. I have debugged this, but have not found any flags that can enable the OLAP functionality needed to perform the aggregation. The functionmodule is "RSDRI_INFOPROV_READ_RFC".
The situation is that I need to apply the aggregation logic of a profit center hierrarchy to the data I read from RSDRI_INFOPROV_READ_RFC, this means manually replicating the the OLAP engine functionality (keyfigure aggregation exception, ect.) and this is not an option with the available time/budget.
Please have a look at the example below:
Say that I have a profit center hierarchy as displayed below (with postable nodes).
PC1 - $10
|---- PC2 - $30
|---- PC3 - $20
The data I'm getting back from the functionmodule RSDRI_INFOPROV_READ_RFC looks like this:
PC1 $10
PC2 $30
PC3 $20
But I need the data aggregated. An aggregation utilizing the hierarchy above will make the data look like this:
PC1 $60
PC2 $30
PC3 $20
Instead of building an aggregation program, it would be usefull if it was possible to extract aggregated data.
Any comments appreciated.
Regards
Martin

Thx Olivier,
The problem is that I need a functionmodule that can apply the OLAP aggregation for a hierarchy to the data outpu from RSDRI_INFOPROV_READ_RFC.
... or the best alternative would be if there were a fm/class that could provide me with the hierarchy aggregation of the data.
/Martin

Data aggregation

Similar Messages

Maybe you are looking for