Data Error in the Query/Report after selective data deletion for infocube

Hi Experts,
Please advise what i was missing and what went wrong...
I got a Query (Forecast) on a Multicube...which is based on 2 Infocubes with Aggregates...
As i identified some data discrepency..yesteraday i performed selective data deleation on one of the Infocube
and executed report yesteraday and the results in the query are correct...
When today i executed the same report i am getting different results..
When i compared the results of the report with that of data in cube they are not matching
The report is not displaying the data in cube..for some rows it is displaying the data in the cube but for some rows it is just displaying same as the above row
there is no data loaded into info cube after selective deleation
Do i need to perform request compression and fill the aggregated after selective deleation
Please advise what went wrong

Hi Venkat,
No i haven't done anything on aggregates before or after selective delete
As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
Please update how to identify error

Similar Messages

  • Data Error in the Query Output

    Hi Experts
    Could you please advise me how to proceed.....and impact of Aggregates
    I had a Query based on a Multicube which in turn is based on 4 Infocubes
    IC1-North,
    IC2-South,
    IC3-EAST,
    IC4-WEST.
    I had Aggregates developed on
    IC1-North,
    IC2-South,
    IC4-WEST.
    Data is loaded according to Location to the respective cubes
    When i execute query based on Multicube...in the variable screen i had a user entry variable...when i select the drop down list of avaliable Location...the list doesn't contain EAST as a Location ID and also when i execute the query with out location it is not displaying IC3-EAST data in the output
    Could you please update me ...what might be the reason of the problem and how to proceed
    Thanks

    Hi Venkat,
    No i haven't done anything on aggregates before or after selective delete
    As there is not data load after the selective delete according to SAP Manual we don't need to perform any thing on aggregates...as selective data deletion on cube will delete data from aggregates as well
    Please update how to identify error

  • Setting button property after selecting data from list

    I am not able to set the button property after selecting data from list.
    I would like to say that
    * If a user select an item from list, then user is only allowed to update or delete the data. The update and delete button should be enabled and save button should be disabled.
    * If the users types data manually, then user is allowed only to save this as new entry. The update or delete button at this time should be disabled and only save button should be enabled.
    I want to say that
    In both case, value will be there
    In one case, value will be from list and that is available for update or delete
    in another case, value will be typed from keyboard that is available for save(new entry).
    I do not want to use separate form for update/delete/save new record. I want to use single form for all these operations.
    I am using Form 6i and oracle 8
    Please guide me, I am trying to find this answer for last four days, but could not find the answer. Please help me. Waiting for you reply...

    Thanks Mr. fdellipriscoli,
    But where should this code be written and
    Where the parameter be set to 'YES'
    I think this code should be written somewhere when calling list.
    But bydefault list is called by pressing F9 key. Then where the parameter be set to 'YES' .
    Please help Mr. fdellipriscoli. Waiting for your reply...

  • Putting video clips (mov) in to edit work place time line after photos (jpeg) getting error message, the importer reported a generic error. ? please help thanks

    premier elements12, putting video clips (mov) in to edit work place time line after photos (jpeg) error message, the importer reported a generic error. ? please help.

    TINA54
    Thanks for the reply.
    Some general comments...
    Regarding:
    THERE ANY WAY I CAN PUT MULTIPLE RANDUM TRANSITIONS IN TO THE TIME LINE WITH JUST ONE CLICK ? .
    There is no transition choice for random transitions across the Premiere Elements 12 workspace Timeline. But, the Elements Organizer 12/Create Menu/Slideshow and its Slideshow Editor does have that random transition choice. So, one possibilitity would be to create your slideshow in Elements Organizer 12 Slideshow Editor and then move the slideshow into Premiere Elements with the Output of Edit with Premiere Elements Editor command.
    Pending more details of the slideshow you are creating, I think that you would get your best photo quality and overall results staying with Premiere Elements 12 workspace (1080p) project and the transitions randomized manually.
    perhaps applying the default to all (all at the same time),
    using Timeline Menu/Apply Default Transition,
    and then replacing transitions randomly for the random transition look).
    Please let us know if any of that worked for you.
    Thanks.
    ATR

  • Date error when scheduling webi reports

    Hi,
    When i click the prompt option in re schedule the scheduled webi report, i got the error "while trying to invoke the method java.util.date.gettime() of a null object loaded from a local variable 'date' "
    The BI version is 4.1 SP03
    The scheduled webi reports failing and got the error as "Unparseable date: "01/01/1900" "
    How to solve this issues?
    Regards,
    Kathir

    This might fix it from the note http://service.sap.com/sap/support/notes/1981477
    Create a WebI report that uses a date object in the Query Filters
    Schedule the report
    Reschedule by manually entering date value which shows only date and no timestampExample: 12/31/2007
    Reschedule by selecting date value from the calendar which shows date timestampExample: 12/31/2007 12:00:00 AM
    Create a biar file using the Import Wizard and migrate to BI 4.1 SP2
    BI 4.1 SP2 BILaunchPad, navigate to and Right click the report and go to “History”
    Right click the instance without a timestamp for the date parameter and select “Reschedule”
    Click on “Prompts” on the left menu and note an error is produced:This error occurred: while trying to invoke the method java.util.Date.getTime() of an object loaded from local variable ‘date’
    Attempting to schedule this instance (as Run Now or Reschedule) without selecting a Prompt value fails with the error:  Unparseable date: “12/31/2007”
    Using the instance with a timestamp works as expected

  • Limit the result in the query's varible selection.

    I have many reports involed the requirment that in the query's varible selection we only want the users could see the calmonth demanded by me such as 200903,200902,200901,200812 and 200811 before the current system date (not include the future calmonth),and after we make these confirguration it should not influent the accumulative indicators which add the values include such calmonth as 200810,200809 and 200808. Actually in these info providers and master datas they exit past and future calmonth we dont want see in the query's varible selection. For the requirement we have consulted many SAP channels but they could give us any avarable advice,how could i do?

    Arun Varadarajan,
    Thanks for ur reply. the a is sugguestive and operative.But for b I have my problem:
    a. After I create a variable for calmonth,its named var_calmonth which is customer exit and variable is ready for input,how is the variable representing? interval,single value or multiple single value? If it is single value,u could not APPEND l_s_range TO e_t_range in customer exit.If interval or multiple single value the upper is worked but u could not get the correct input GUI.The list is my coustmor exit code for the variable which is interval or multiple single value:
      WHEN 'VAR_calmonth' .
        IF i_step = 1.
          TYPES : BEGIN OF ls_calmonth ,
                  zcalmonth TYPE /bi0/oicalmonth,
                  END OF ls_calmonth.
          DATA : lt_calmonth TYPE TABLE OF ls_calmonth.
          DATA : wa_calmonth TYPE ls_calmonth .
          DATA: l_calmonth(6)    TYPE n.
          l_calmonth = sy-datum(6).
          SELECT CALMONTH FROM /BI0/SCALMONTH
          INTO TABLE lt_calmonth
          WHERE calmonth BETWEEN '200001' AND l_calmonth.
          SORT lt_calmonth BY zcalmonth DESCENDING.
          LOOP AT lt_calmonth INTO wa_calmonth .
            l_s_range-low = wa_calmonth-zcalmonth.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
        ENDIF.
    b. Even if we have solved the upper problem the next is the values of the variable got through customer exit is also limited the query result.I mean it effects not only variable selection.
    Any way, thanks again.
    zport.

  • [Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

    Hi
    DECLARE @XMLA nvarchar(3000)
    , @DateSerial nvarchar(35);
    -- Change date to format YYYYMMDDHHMMSS
    SET @DateSerial = CAST(GETDATE() AS DATE);
    --SELECT @DateSerial
    Set @XMLA = 
    N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
     <ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
    xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
    xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <KeyErrorLimit>-1</KeyErrorLimit>
    <KeyNotFound>IgnoreError</KeyNotFound>
    <NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
     </ErrorConfiguration>
     <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
    xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
    xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
     <Object>
     <DatabaseID>MultidimensionalProject5</DatabaseID>
     <CubeID>giri</CubeID>
     <MeasureGroupID>Fact Internet Sales</MeasureGroupID>
     </Object>
     <Type>ProcessFull</Type>
     <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
     </Process>
      </Parallel>
    </Batch>';
    EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
     iam executive the    query when iam getting below error.
      [Execute SQL Task] Error: Executing the query "DECLARE
    @XMLA nvarchar(3000)
    , @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
    correctly, or connection not established correctly. 
     how to solve this error;
     please help me

    What are you trying to do? What sort of data source is  SHALL-PCAdventureWorksDw?
    When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
    If you explain why you think this would work in the first place, maybe we can help you.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

    hi
      i'd like to ask question about linked server.
      my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
    for linked server"
      but in fact for test connection i was told "the test connection to the linked server succeeded".
      could  anyone help me? thank u very much
    best regards
    martin

    Hi, 
    In addition to Tracy's post we have to know those answers as well:
    * what provider are you using for the connection
    * what do you connect to
    for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
    please post the connection string (without the password!) + the query that you are trying to use.
    [Personal Site] [Blog] [Facebook]

  • UDF Value is not coming in the query report

    Hi all,
    i have designed query report based on AR Invoice which has some UDF .
    all udf have FMS applied and all these udf has values.
    when i run report some times udf values are coming in the report and somtimes not even if udf contains values.
    if i open perticular invoice and again update that udf and again run report now udf value will come in the report.
    every time i need to manualy update the udf even if that udf contain value.
    how to avoide this problem.
    Pls suggest solution.
    Regards,
    Chetan

    Hi Chetan,
    Try this,
    -> Open the require document(module).
    Assign this procedure and then ADD the document
    and Run the Query Report.
    1. Goto the UDF and Click (ShiftAltF2).
    2. Select the SEARCH BY SAVED QUERY.
    3. Assign the FMS Query in UDF.
    4. Select the AUTO REFRESH WHEN FIELD CHENGES.
    5. Select the Auto Refresh Field (for example CardCode (or) Remarks).
    6. Check the Display Saved Values.
    OR
    -> Open the require document(module).
    1. Goto the UDF and Click (ShiftAltF2).
    2. When will you add the document at that time
    you can Click the SHIFT + F2 and than ADD the document.
    and than Run the Query Report.
    Regards,
    Madhan.

  • Writing commands to get specific data channels in the output report via script or automated script generation..

    In my project I have to make certain calculation and then get the data plotted in the given report template. I am using automated script for this. My script is doing all the calculations and then it not selecting and drag-dropping the selected channels on the report template. Its saving the blank report template.
    I am struggling to get the data for specific channels plotted by using the script. I need the selected channels to be plotted on this report template and then get it saved.
    Any help will be deeply appreciated. Thanks
    Solved!
    Go to Solution.

    Hi LaxG,
    Brad is absolute right. It is possible to create your whole layout via script.
    If you have loaded  the example report layout you can copy these lines to create a new line in your plot. This is the recommended object oriented way.
    call Report.Sheets("Blatt 1").Objects("2D-Axis1").Curves2D.Add(e2DShapeLine, "anyName")
    Report.Sheets("Blatt 1").Objects("2D-Axis1").Curves2D.Item("anyName").Shape.XChannel.Reference               = "[1]/Zeit"
    Report.Sheets("Blatt 1").Objects("2D-Axis1").Curves2D.Item("anyName").Shape.YChannel.Reference               = "[1]/Geschwindigkeit"
    For performance reasons it's recommended to use the it like this.
    dim oLine
    set oLine = Report.Sheets("Blatt 1").Objects("2D-Axis1").Curves2D.Item("anyName").Shape
    oLine.XChannel.Reference               = "[1]/Zeit"
    oLine.YChannel.Reference               = "[1]/Geschwindigkeit"
    Like Brad mentioned it is much easier, that you have a stored template of your report with all setings and customisations already done.
    You open this layout file and have stored the names of your calculated channels. When you are doing this with a script they always have the same name and belong to the same group.
    Now you can customize the references of the line items.
    Kind Regards,
    Philipp K.
    AE | NI Germany

  • [Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

    I have an package with source , data flow and destination to execute on begin and commit.
    in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
    on execution, i get error as
    [Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
    property not set correctly, parameters not set correctly, or connection not established correctly.
    as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
    Kindly advice on what has to be done.
    ShanmugaRaj

    To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
    Narsimha

  • I constantly get the following error message: The backup disk image "/volumes/data/ james kehoe.sparsebundle" is already in use.

    I constantly get the following error message: The backup disk image "/volumes/data/jameskehoe.sparsebundle" is already in use. This Time Machine/Time Capsul worked perfectly before I left on a four month trip. Upon returning to my domicle it will not backup and I get the mentioned error message. My wife's Mac Book Pro continues to backup normally but she did not accompany me on this trip so her computer has always remained in contact with the Time Machine. My computer is a MacBook running 10.7.5
    Any help solving this problem and letting me once again backup my computer would be greatly appreciated.

    This question is asked several times every day.. it is a bug.
    Look at the more like this column to the right..
    Solution is pretty simple..
    With the TC hard disk not running.. you can feel the vibration ..
    pull out the power cord.. count to 10.. plug in the power cord.
    If you still have the problem report back.. mostly 98% of cases that will fix it.

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • HT3275 My time machine does not back up and giving me this error message: The backup disk image "/Volumes/Data-1/Amiel's MacBook Pro.sparsebundle" is already in use. Pls help.

    My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.

    Make sure that there are no other Macs backing up at the present time.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back in
    This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.

  • HT201514 When I try to back up ,I get the error message:The backup disk image "/Volumes/Data/ iMac.sparsebundle" could not be accessed (error -1).

    When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?

    Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
    " . . . sparse bundle could not be accessed (error -1)"

Maybe you are looking for